1104LS series

1. Picking up point with nozzle: Lamp housing of the product (

area)

(Shown below)

＜Recommendation＞

The picking up point should be within lamp housing portion, because the silicone resin used for the

lens is soft. (If the nozzle makes contact with the lens, the products might be destroyed)

Handling precaution

【Handling precautions for product mounting】

Please adjust the load, the pick up point, the nozzle diameter, etc. before mounting

because the over load can cause the breakage of the lamp housing.

a

b

2. Recommended Nozzle shape

※Nozzle with chamfering is recommended

Load : less than 10N

(to avoid the product breaking)

Page 10

2017.11.20