4 / 4

Den aktuellen Stand des Datenblattes finden Sie auf unserer Internetseite - The current valid issue of the datasheet can be found on our website

Ausgabe / Issue LMP-2012-04-20

e-mail: sales.components@isabellenhuette.de - Internet: www.isabellenhuette.de

LMP

Bauform / Size : 2010

Spezifikation / Specification

Parameters

Test Conditions

Specification

Typical data

Maximum Temperature for full power operation

140 °C

140 °C

140 °C

Working Temperature

-55 to 170 °C

-55 to 170 °C

-55 to 170 °C

Thermal Shock

MIL-STD-202 method 107-B1

0.1 %

0.1 %

Overload

MIL-R-26E (5 times rated power, 5 sec)

0.2 %

0.2 %

Solderability

MIL-STD-202 method 208

> 95 % coverage

> 95 % coverage

Resistance to Solvents

MIL-STD-202 method 215, 2.1a, 2.1d

no damage

no damage

Low Temperature Storage and Operation

MIL-STD-26E

0.1 %

0.1 %

Resistance to Soldering Heat

MIL-STD-202 method 210

0.1 %

0.1 %

Moisture Resistance

MIL-STD-202 method 106

0.1 %

0.1 %

Shock

MIL-STD-202 method 213-A

0.2 %

0.2 %

Vibration, High Frequency

MIL-STD-202 method 204-B

0.2 %

0.2 %

Life

MIL-STD-26E

0.2 %

0.2 %

Storage Life at Elevated Temperature

MIL-STD-202 method 108-F

0.3 %

0.3 %

Current Noise

MIL-STD-202 method 308

0.01 %

0.01 %

Voltage Coefficient (%/V)

MIL-STD-202 method 309

linearity error less than 120dB

linearity error less than 120dB

Resistance Temperature Characteristic

MIL-STD-202 method 304 (20-60°C)

< 50 ppm/K

< 50 ppm/K

Thermal EMF

0 - 100 °C

2 µV/ °C max.

2 µV/ °C max.

Frequency Characteristic

inductivity

< 3 nH

< 3 nH

Isabellenhütte Heusler GmbH & Co. KG

Eibacher Weg 3-5 - D-35683 Dillenburg - Telefon / Phone +49 (0) 27 71 9 34 - 0 - Fax: +49 (0) 27 71 2 30 30

Grenzkurve für maximale Pulsenergie bzw. Pulsleistung für Dauerbetrieb /

Maximum pulse energy respectively pulse power for continuous operation

10000

1000

Die dargestellte Kurve gilt für den Widerstandswert R010. Für andere Werte kann die Kurve im unteren Bereich ggf. anders verlaufen, so dass in Grenzbereichen eine separate

Qualifikation erfolgen sollte.

This curve is only valid for the resistance value R010. The shape of the curve in the range below 0.1 sec will be different for other resistance values.

Therefore a separate qualification should be made for pulse power close to the above curve.