MP6507 datasheet(3/18 Pages) MPS

3 / 18 page

MP6507 –2.7V-TO-15V, 700mA, STEPPER MOTOR DRIVER

MP6507 Rev. 1.05

www.MonolithicPower.com

4/30/2018

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

ABSOLUTE MAXIMUM RATINGS (1)

Supply Voltage VIN ..........................-0.3V to 18V

AOUTx Voltage VAOUTx ...............-0.3V to VIN+1V

BOUTx Voltage VBOUTx ...............-0.3V to VIN+1V

BST Voltage VBST.......................-0.3V to VIN+7V

Sense Voltage VSENx ......................-0.3V to 0.5V

All Other Pins.................................-0.3V to 6.5V

Junction Temperature...............................150°C

Lead Temperature ....................................260°C

Continuous Power Dissipation (TA = +25°C) (2)

QFN16 (3×3mm)........................................ 2.1W

QFN16 (4×4mm)........................................ 2.7W

TSSOP16-EP (5.0×6.4mm) ....................... 2.8W

TSSOP16................................................... 1.4W

Operating Temperature.............. -40°C to +85°C

Recommended Operating Conditions (3)

Supply Voltage VIN ...........................2.7V to 15V

Output Current IA/BOUT.............................. 700mA

Operating Junction Temp. (TJ). -40°C to +125°C

Thermal Resistance (4)

θJA

θJC

QFN16(3×3mm)...................... 60 ...... 12... °C/W

QFN16(4×4mm)...................... 46 ...... 10... °C/W

TSSOP16-EP(5.0×6.4mm) ..... 45 ...... 10... °C/W

TSSOP16 ............................... 90 ...... 30... °C/W

Notes:

1) Exceeding these ratings may damage the device.

2) The maximum allowable power dissipation is a function of the

maximum junction temperature TJ (MAX), the junction-to-

ambient thermal resistance θJA, and the ambient temperature

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD (MAX) = (TJ

(MAX)-TA)/θJA. Exceeding the maximum allowable power

dissipation will cause excessive die temperature, and the

regulator will go into thermal shutdown. Internal thermal

shutdown circuitry protects the device from permanent

damage.

3) The device is not guaranteed to function outside of its

operating conditions.

4) Measured on JESD51-7, 4-layer PCB.

MP6507 датащи(PDF) 3 Page - Monolithic Power Systems

MP6507 датащи(HTML) 3 Page - Monolithic Power Systems

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

датащи скачать

ссылки URL