HIP4086 datasheet(14/17 Pages) RENESAS

14 / 17 page

HIP4086, HIP4086A

FN4220 Rev 1.00

Page 14 of 17

January 12, 2017

Revision History The revision history provided is for informational purposes only and is believed to be accurate, however, not

warranted. Please go to the web to make sure that you have the latest revision.

DATE

REVISION

CHANGE

January 12, 2017

FN4220.11

The following revisions were made to the DC and AC Electrical Specifications:

-VDD Quiescent Current (HIP4086): updated maximum (TJ = +25°C) from “4.2” to “5.1”, updated min and

max (TJ = -40°C to +150°C) from “2.1” to “1.96” and “4.3” to “5.3”, respectively.

-VDD Quiescent Current (HIP4086A): updated max and typical (TJ = +25°C) from “2.6” to “3.1” and from “2.4”

to “2.8”, updated min and max (TJ = -40°C to +150°C) from “2.1” to “1.8” and from “2.7” to “3.3”, respectively.

-VDD Operating Current (HIP4086): updated min and max (TJ = +25°C) from “6.3” to “5.4” and from “10.5”

to “13”, updated min and max (TJ = -40°C to +150°C) from “5” to “4” and “11” to 13.5”, respectively.

-VDD Operating Current (HIP4086A): updated typical and max (TJ = +25°C) from “3.6” to “4.0” and from “4.1”

to “4.6”, updated min and max (TJ = -40°C to +150°C) from “2.8” to “2.7” and from “4.4” to “5.1”, respectively.

-xHB On Quiescent Current (HIP4086): updated maximum (TJ = +25°C) from “80” to “110”, updated

maximum (TJ = -40°C to +150°C) from “100” to “140”.

-xHB On Quiescent Current (HIP4086A): updated typical and max (TJ = +25°C) from “80” to “90” and from

“100” to “115”, updated maximum (TJ = -40°C to +150°C) from “200” to “225”.

-xHB Off Quiescent Current (HIP4086A): updated typical and max (TJ = +25°C) from “0.9” to “1.0” and from

“1” to “1.2”, updated maximum (TJ = -40°C to +150°C) from “1.2” to “1.25”.

-xHB Operating Current (HIP4086A): updated maximum (TJ = +25°C) from “1” to “1.1”, updated maximum

(TJ = -40°C to +150°C) from “1.2” to “1.25”.

-xHB, xHS Leakage Current: updated typical (TJ = +25°C) from “24” to “30”.

-Minimum Undervoltage Threshold: updated min (TJ = -40°C to +150°C) from “4.9” to “4.8”.

-QPUMP Output Voltage: updated min and max (TJ = +25°C) from “11.5” to “11” and from “14” to “14.6”,

updated min and max (TJ = -40°C to +150°C) from “10.5” to “10” and “14.5” to “14.75”, respectively.

-QPUMP Output Current: updated min and max (TJ = +25°C) from “50” to “40” and from “130” to “160”,

updated maximum (TJ = -40°C to +150°C) from “140” to “185”.

-Low Level Input Current: updated maximum (TJ = +25°C) from “-135” to “-155”, updated maximum

(TJ = -40°C to +150°C) from “-140” to “-165”.

-Low Level Output Voltage: updated maximum (TJ = -40°C to +150°C) from “200” to “210”.

-Dead Time (RDEL = 100kΩ): updated min and max (TJ = +25°C) from “3.8” to “3” and from “6” to “7.2”,

updated maximum (TJ = -40°C to +150°C) from “7” to “8”.

-Dead Time (RDEL = 10kΩ): updated maximum (TJ = +25°C) from “0.65” to “0.75”, updated maximum

(TJ = -40°C to +150°C) from “0.7” to “0.8”.

-xLI to xLO turn-off: updated maximum (TJ = +25°C) from “45” to “55”, updated maximum

(TJ = -40°C to +150°C) from “65” to “75”.

-xHI to xHO turn-off: updated maximum (TJ = +25°C) from “90” to “110”, updated maximum

(TJ = -40°C to +150°C) from “100” to “135”.

-xLI to xLO turn-on: updated maximum (TJ = +25°C) from “75” to “82”, updated maximum

(TJ = -40°C to +150°C) from “90” to “100”.

-xHI to xHO turn-on: updated maximum (TJ = +25°C) from “90” to “110”, updated maximum

(TJ = -40°C to +150°C) from “100” to “158”.

-Rise Time: updated maximum (TJ = -40°C to +150°C) from “50” to “60”.

-Fall Time: updated maximum (TJ = -40°C to +150°C) from “25” to “40”.

-DIS to xLO turn-off: updated maximum (TJ = -40°C to +150°C) from “90” to “104”.

-DIS to xHO turn-off: updated maximum (TJ = +25°C) from “90” to “116”, updated maximum

(TJ = -40°C to +150°C) from “100” to “147”.

-DIS to xLO turn-on: updated maximum (TJ = +25°C) from “80” to “85”, updated maximum (TJ = -40°C to

+150°C) from “100” to “120”.

Minor Parameter label changes to use consistent descriptions for related parameters.

Updated from “50µA” to “40µA” in “Charge Pump” and “Selecting the Boot Capacitor Value” on page 11.

March 27, 2015

FN4220.10

Added AN1829, “HIP4086 3-Phase BLDC Motor Drive Demonstration Board, User Guide” bullet to the related

literature section on page 1.

On page 3:

In the Pin Configuration updated typo for Pin 17 Pin Name from “AHC” to “AHO”.

In the Pin Description table:

Updated RDEL and UVLO Description to reference the correct Figures.

RDEL - from “Figure 18” to “Figure 19” and UVLO - from “Figure 19”to “Figure 20”.

Updated typo-AHS pin number from “15” to “18”.

Added “RDEL range10kΩ to 100kΩ” to the “Maximum Recommended Operating Conditions” on page 5.

Updated the About Intersil verbiage.

January 28, 2013

FN4220.9

Corrected following typo in the second paragraph of page 1:

From: (0.5ms to 4.5ms)

To: (0.5µs to 4.5µs)

HIP4086 датащи(PDF) 14 Page - Renesas Technology Corp

HIP4086 датащи(HTML) 14 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

датащи скачать

ссылки URL