EV7752-F-00A – INDUCTORLESS 2X15W STEREO BTL FIX FREQUENCY CLASS D AUDIO AMPLIFIER EVB

EV7752-F-00A Rev. 1.0

www.MonolithicPower.com

5

8/15/2014

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

© 2014 MPS. All Rights Reserved.

QUICK START GUIDE

EV7752-F-00A is set up from the factory for 5V to 18V single supply operating voltage with single-

ended signal inputs. To use differential signal inputs, please remove the jumpers from JP1 and JP2.

IN1

IN2

VDD

GND

S1

JP1

JP4

JP2

GAIN0

GAIN1

EN

GND

FAULT

PLIMIT

GND

InAbsence

EV7752-F-00A

MPS

JP3

JP5

In1+ In1-

In2-

In2+

GND

Figure 5—EV7752-F-00A Connection Diagram

1. Power, Signal and Load Impedance Requirements

a. Power supply: 5V to 18V (12V typical), 3A maximum (1.8A typical).

b. 0V to 2VRMS (max) audio signal source.

c. Speaker: typically 4Ω to 8Ω (8Ω typical);

2. Setup Condition for 12V Operation

a. Adjust the DC power supply to 12V (do not turn on).

b. Connect the outputs to the external speakers.

c. Connect the DC power supply to the power input terminals.

d. Set the voltage gain by GAIN0 and GAIN1 jumpers, default voltage gain=20dB.

e. Set the PLIMIT voltage to target output power level. Default setting is 1/2 AVCC, 2.75V

equivalent.

e. Connect the audio input signal source to the amplifier inputs (IN1 and IN2).

3. Music Turn-on/off Sequence

a. Push button S1 to disable this EVB, release S1 to enable (default position).

b. Turn-on/off the power supply.