Crystal Oscillator

1803D_NT2016SC_e

Temperature Compensated Crystal Oscillator(TCXO)

with two outputs of same frequency and E/D function

NT2016SC

Smartphone / Mobile phone, Wireless module, and GPS / GNSS module, etc.

● Supports low power supply voltage. (Supports DC +1.7V to +3.3V. Standard

specification : +1.8V)

● Ultra-compact and light with a height, cubic volume, and weight of Max. 0.8 mm,

● A surface-mount crystal oscillator. (Reflow soldering is possible.)

● Lead-free. Meets the requirements for re-flow profiling using lead-free solder.

● With Enable / Disable function (This function can be used for both output1 and 2).

● It is possible to choose the AFC function instead of the Enable/Disable function for

output 2.

Item

Model

NT2016SC

Nominal Frequency Range (MHz)

10 to 52

Standard Frequency (MHz)

26

38.4

52

+1.8

Load Impedance

10 kΩ//10 pF

Current Consumption (mA) (Two outputs)

Max. 2.0

Max. 2.2

Max. 2.4

Output Voltage

Min. 0.8 V(p-p) (DC Coupling *1)

Frequency/Temperature Characteristics

Operating Temperature Range (°C)

–30 to +85

Storage Temperature Range (°C)

–40 to +85

Frequency/Voltage Coefficient

Frequency/Load Coefficient

Long-term Frequency Stability

Specification Number

NSA3502B

NSA3502C

NSA3502D

• Frequency setting conditions : Frequencies are set at normal temperatures (+25±2 °C).

*1. A DC-cut capacitor is not embedded in this crystal oscillator. Connect a DC-cut capacitor (1,000 pF) to the line-out terminal of the oscillator.

mm

#1

#2

#3

#4

#5

#6

Control Voltage (Enable/

Disable) for output2

Output2 (Analog)

GND

Output1 (Analog)

Control Voltage (Enable/

Disable) for output1

Terminal land connections

#1

#2

#4

#5

#6

#4

#5

#6

#3

#1

#2

#3

2.0±0.1

(0.6)

(1.2)

(0.5)

(0.6)

1.2±0.05

0.5

0.4±0.1

Enable/Disable input or

AFC for output2

Enable/Disable input

for output1