EV020-5-S-00A

85VAC~265VAC/50Hz, 5V/1A

Off-line Primary-side-Regulator

Cell phone Charger Evaluation Board

EV020-5-S-00A Rev.1.02

www.MonolithicPower.com

1

11/28/2013

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

© 2013 MPS. All Rights Reserved.

The Future of Analog IC Technology

DESCRIPTION

The

EV020-5-S-00A

Evaluation

Board

is

designed to demonstrate the capabilities of

MP020-5. The MP020-5 is a primary-side-

control

regulator

which

can

eliminates

secondary feedback components.

The EV020-5-S-00A is typically designed for

cell phone which output 5V, 1A load from

85VAC to 265VAC, 50HZ/60HZ.

The EV020-5-S-00A has an excellent efficiency

and meets IEC61000-4-5 surge immunity and

EN55022 conducted EMI requirements. It has

multi-protection

function

as

open

circuit

protection, short-circuit protection, cycle by

cycle

current

limit

and

over-temperature

protection, etc.

ELECTRICAL SPECIFICATION

Parameter

Symbol

Value

Units

Input Voltage

85 to 265

VAC

Output Voltage

5

V

Output Current

1

A

Output Power

5

W

Efficiency (full load)

η

>70

%

FEATURES

 Primary-Side–Control without Opto-Coupler

or Secondary Feedback Circuit

 Precise Constant Current and Constant

Voltage Control (CC/CV)

 Integrated 700V MOSFET with Minimal

External Components

 Variable, Off-Time, Peak-Current Control

 550µA High-Voltage Current Source

 30mW No-Load Power Consumption

 Programmable Cable Compensation

 Multiple Protections: OVP, OCP, OCkP,

OTP, and VCC UVLO

 Natural Spectrum Shaping for Improved

EMI Signature

 Low Cost and Simple External circuit

APPLICATIONS

 Cell Phone Chargers

 Adapters for Handheld Electronics

 Stand-By and Auxiliary Power Supplies

 Small Appliances

All MPS parts are lead-free and adhere to the RoHS directive. For MPS

green status, please visit MPS website under Quality Assurance. “MPS” and

“The Future of Analog IC Technology”, are Registered Trademarks of

Monolithic Power Systems, Inc.

Warning:

Although this board is designed to satisfy safety

requirements, the engineering prototype has not been

agency approved. Therefore, all testing should be performed

using an isolation transformer to provide the AC input to the

prototype board.