MP100L EASYPOWER

Power-Good

The MP100L integrates a power-good circuit to

signal that the output meets the controller IC’s

requirements. It is an open drain structure and

requires a pull-up resistor to VOUT. During start

up, the VOUT voltage rises smoothly. When it

reaches 80% of its normal value, the power-good

signal goes high after a 245µs delay to indicate a

normal output.

MP100L Rev. 1.0

www.MonolithicPower.com

11

11/3/2014

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

© 2014 MPS. All Rights Reserved.