MP5505GL datasheet(2/15 Pages) MPS

2 / 15 page

MP5505 – ENERGY STORAGE AND MANAGEMENT UNIT

MP5505 Rev. 1.01

www.MonolithicPower.com

1/12/2015

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

ORDERING INFORMATION

Part Number*

Package

Top Marking

MP5505GL

QFN20L (3mmx4mm)

MP5505

* For Tape & Reel, add suffix –Z (e.g. MP5505GL–Z);

PACKAGE REFERENCE

TOP VIEW

DVDT

TPOR

ILIM

PGIN

PGS

ENCH

ICH

FBS

FBB

AGND

CST

BST

VIN

VBO

PGND SW STRG

QFN20L (3mmx4mm)

ABSOLUTE MAXIMUM RATINGS (1)

Supply Voltage VIN ......................................8.0V

VSTRG.............................................. -0.3V to 35V

VSW .....................................-0.3V to VSTRG+0.3V

VBST ....................................-0.3V to VSTRG+6.5V

VCST ............................................... -0.3V to 40V

All Other Pins.............................. –0.3V to 6.5 V

Continuous Power Dissipation (TA = +25°C)

(2)

............................................................2.6W

Junction Temperature.............................. 150°C

Lead Temperature ................................... 260°C

Operating Temperature............. –40°C to +85°C

Recommended Operating Conditions

(3)

Supply Voltage VIN ............................ 2.7V to 7V

Bus Voltage VB ................................. 2.7V to 6V

Storage Voltage VSTRG ....................... VIN to 30V

Operating Junction Temp. (TJ). -40°C to +125°C

Thermal Resistance

(4)

θJA

θJC

QFN20 (3mmx4mm)............... 48 ...... 10... °C/W

Notes:

1) Exceeding these ratings may damage the device.

2) The maximum allowable power dissipation is a function of the

maximum junction temperature TJ (MAX), the junction-to-

ambient thermal resistance θJA, and the ambient temperature

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD (MAX) = (TJ

(MAX)-TA)/θJA. Exceeding the maximum allowable power

dissipation will cause excessive die temperature, and the

regulator will go into thermal shutdown. Internal thermal

shutdown circuitry protects the device from permanent

damage.

3) The device is not guaranteed to function outside of its

operating conditions.

4) Measured on JESD51-7, 4-layer PCB.

MP5505GL датащи(PDF) 2 Page - Monolithic Power Systems

MP5505GL датащи(HTML) 2 Page - Monolithic Power Systems

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

датащи скачать

ссылки URL