MPM3606GQV datasheet(2/18 Pages) MPS

2 / 18 page

MPM3606 – SYNCHRONOUS STEP-DOWN MODULE WITH INTEGRATED INDUCTOR

MPM3606 Rev. 1.0

www.MonolithicPower.com

8/11/2014

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

ORDERING INFORMATION

Part Number*

Package

Top Marking

MPM3606GQV

QFN-20 (3mmx5mmx1.6mm)

MP3606

* For Tape & Reel, add suffix –Z (e.g. MPM3606GQV–Z)

PACKAGE REFERENCE

ABSOLUTE MAXIMUM RATINGS (1)

VIN ..................................................-0.3V to 28V

VSW......................................................................

-0.3V (-5V for <10ns) to 28V (30V for <10ns)

VBST ........................................................ VSW+6V

All Other Pins................................-0.3V to 6V (2)

Continuous Power Dissipation (TA = +25°C)

(3)

............................................................. 2.7W

Junction Temperature...............................150°C

Lead Temperature ....................................260°C

Storage Temperature................. -65°C to 150°C

Recommended Operating Conditions

(4)

Supply Voltage VIN ...........................4.5V to 21V

Output Voltage VOUT..................... 0.8V to 5.5V

(5)

Operating Junction Temp. (TJ). -40°C to +125°C

Thermal Resistance

(6)

θJA θJC

QFN-20 (3mmx5mmx1.6mm) ...46.... 10... °C/W

Notes:

1) Exceeding these ratings may damage the device.

2) About the details of EN pin’s ABS MAX rating, please refer to

page 11, Enable control section.

3) The maximum allowable power dissipation is a function of the

maximum junction temperature TJ (MAX), the junction-to-

ambient thermal resistance θJA, and the ambient temperature

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD (MAX) = (TJ

(MAX)-TA)/θJA. Exceeding the maximum allowable power

dissipation will cause excessive die temperature, and the

regulator will go into thermal shutdown. Internal thermal

shutdown circuitry protects the device from permanent

damage.

4) The device is not guaranteed to function outside of its

operating conditions.

5) For output voltage setting above 5.5V, please refer to the

application information on page 13.

6) Measured on JESD51-7, 4-layer PCB.

MPM3606GQV датащи(PDF) 2 Page - Monolithic Power Systems

MPM3606GQV датащи(HTML) 2 Page - Monolithic Power Systems

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

датащи скачать

ссылки URL