MP2188 datasheet(3/17 Pages) MPS

3 / 17 page

MP2188 – DUAL 3A, 5.5V, 1.2MHz, SYNCHRONOUS STEP-DOWN SWITCHER

MP2188 Rev. 1.01

www.MonolithicPower.com

2/2/2016

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

ABSOLUTE MAXIMUM RATINGS (1)

Supply Voltage VIN ......................................... 6V

VSW............... (-3V for < 10ns & -5V for <5ns) to

6.5V (7V for <10ns & 9V for <5ns)

All Other Pins.................................-0.3V to +6 V

Junction Temperature...............................150°C

Lead Temperature ....................................260°C

Continuous Power Dissipation (TA = 25°C)

(2)

……….….. ............................................... 1.67W

Storage Temperature............... -65°C to +150°C

Recommended Operating Conditions

(3)

Supply Voltage VIN ..........................2.5V to 5.5V

Output Voltage VOUT.................. 0.8V to Dmax*VIN

Operating Junction Temp. (TJ). -40°C to +125°C

Thermal Resistance

(4)

θJA

θJC

QFN-16 (2.2mm x 2.6mm)...... 75 ...... 16... °C/W

Notes:

1) Exceeding these ratings may damage the device.

2) The maximum allowable power dissipation is a function of the

maximum junction temperature TJ (MAX), the junction-to-

ambient thermal resistance θJA, and the ambient temperature

TA. The maximum allowable continuous power dissipation at

any ambient temperature is calculated by PD (MAX) = (TJ

(MAX)-TA)/θJA. Exceeding the maximum allowable power

dissipation will cause excessive die temperature, and the

regulator will go into thermal shutdown. Internal thermal

shutdown circuitry protects the device from permanent

damage.

3) The device is not guaranteed to function outside of its

operating conditions.

4) Measured on JESD51-7, 4-layer PCB.

MP2188 датащи(PDF) 3 Page - Monolithic Power Systems