| поискавой системы для электроныых деталей |
|
MP2122 датащи(PDF) 2 Page - Monolithic Power Systems |
|
|
|||||||||||||||||||||||||||||
MP2122 датащи(HTML) 2 Page - Monolithic Power Systems |
|
2 / 16 page ![]() MP2122 –6V, 2A, LOW QUIESCENT CURRENT, DUAL, SYNC BUCK REGULATOR MP2122 Rev. 1.02 www.MonolithicPower.com 2 6/12/2017 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. © 2017 MPS. All Rights Reserved. ORDERING INFORMATION Part Number* Package Top Marking MP2122GJ TSOT23-8 See Below * For Tape & Reel, add suffix –Z (e.g. MP2122GJ–Z); TOP MARKING AED: product code of MP2122GJ Y: year code PACKAGE REFERENCE 1 2 3 4 8 7 6 5 TOP VIEW FB2 SW2 EN1 EN2 FB1 SW1 GND IN TSOT23-8 ABSOLUTE MAXIMUM RATINGS (1) Supply Voltage VIN..................................... 6.5V VSW–0.3V (-3V for<10ns) to 6.5V (7.5V for<10ns) All Other Pins.............................–0.3V to +6.5 V Junction Temperature...............................150°C Lead Temperature ....................................260°C Continuous Power Dissipation (TA = +25°C) (2) ................................................................. 1.25W Storage Temperature.............. –65 C to +150C Recommended Operating Conditions Supply Voltage VIN .............................2.7V to 6V Output Voltage VOUT....................0.608V to 5.5V Operating Junction Temp. ....... -40°C to +125°C Thermal Resistance (3) θJA θJC TSOT23-8 ..................................... 100 ..... 55 °C/W Notes: 1) Absolute maximum ratings are rated under room temperature unless otherwise noted. Exceeding these ratings may damage the device. 2) The maximum allowable power dissipation is a function of the maximum junction temperature TJ (MAX), the junction-to- ambient thermal resistance θJA, and the ambient temperature TA. The maximum allowable continuous power dissipation at any ambient temperature is calculated by PD (MAX) = (TJ (MAX)-TA)/θJA. Exceeding the maximum allowable power dissipation will cause excessive die temperature, and the regulator will go into thermal shutdown. Internal thermal shutdown circuitry protects the device from permanent damage. 3) Measured on JESD51-7, 4-layer PCB. |
|
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |