31 | Keysight | Infiniium DCA-X 86100D Wide-Bandwidth Oscilloscope Mainframe and Modules - Data Sheet

N1076A electrical clock recovery

N1076A-216

Clock recovery range: 50 MBd to 16 GBd

N1076A-232

Clock recovery range: 50 MBd to 32 GBd

N1076A-JSA

Jitter spectrum analysis

N1076B electrical clock recovery

N1076B-216

Clock recovery range: 125 MBd to 16 GBd

N1076B-232

Clock recovery range: 125 MBd to 32 GBd

N1076B-264

Clock recovery range: 125 MBd to 64 GBd (56 GBd for

PAM4 signals)

N1076B-EVA

Integrated variable equalizers (mandatory option)

N1076B-JSA

Jitter Spectrum Analysis

N1077A optical/electrical clock recovery

N1077A-216

Clock recovery range: 50 MBd to 16 GBd

N1077A-232

Clock recovery range: 50 MBd to 32 GBd

N1077A-SMS

Internal SM and MM splitters

N1077A-SXT

No splitter (supplied by user)

N1077A-JSA

Jitter spectrum analysis

N1078A optical/electrical clock recovery

N1078A-216

Clock recovery range: 125 MBd to 16 GBd

N1078A-232

Clock recovery range: 125 MBd to 32 GBd

N1078A-264

Clock recovery range: 125 MBd to 64 GBd

N1078A-S50

Internal 50-50 SM optical splitter

N1078A-SXT

No splitter (splitter supplied by user)

N1078A-JSA

Jitter spectrum analysis

N1078A-EVA

Integrated variable equalizers in electrical input path

(mandatory option)

Dual electrical channel module with integrated clock recovery and

precision timebase.

86108A-100

Dual 32 GHz electrical channels, integrated clock

recovery (50 Mb/s to 14.2 Gb/s) with integrated

precision timebase

86108A-001

Two 3.5 mm phase trimmers for skew adjustment

86108A-002

Two precision 3.5 mm 18 inch cables

86108A-400

Auxiliary clock recovery Input

86108B options

86108B-LBW

Dual 35 GHz electrical channels

86108B-HBW

Dual 50 GHz electrical channels

86108B-216

Clock recovery 50 Mb/s to 16 Gb/s

86108B-232

Clock recovery 50 Mb/s to 32 Gb/s

86108B-300

Adjustable loop bandwidth/peaking

86108B-400

Auxiliary clock recovery input

86108B-PTB

Integrated precision timebase

86108B-JSA

Jitter spectrum analysis and software clock recovery

emulation

86108B-A23

Two adapters, 2.4 mm (f) to 3.5 mm (f)

86108B-CA2

Matched cable pair, 2.4 to 2.4 mm, 24 inch

86108B-CA3

Matched cable pair, 3.5 to 3.5 mm, 18 inch

86108B-DC2

Two DC blocks, 2.4 mm, 16 V, 50 kHz to 50 GHz

86108B-DC3

Two DC blocks, 3.5 mm, 16 V, 50 kHz to 26.5 GHz

86108B-PT2

Two 2.4 mm phase trimmers for ext. skew adjustment

Phase trimmers

Nominal impedance

Frequency range

Insertion loss (at f max)

Time delay

Connectors

86108B-PT3

Two 3.5 mm phase trimmers for ext. skew adjustment

Phase trimmers

Nominal impedance

Frequency range

Insertion loss (at f max)

Time delay

Connectors

1. 86100D-ETR is recommended when;

a. More than 1 TDR module is connected to the same DUT.

b. Using a DCA module equipped with a rear-panel trigger circuit.

Examples include 54754A, 83496x, and 86108A/B modules. If

operating these modules in an 86100D with Option STR, an external

cable (such as P/N 5062-6690) must be connected from the module’s

front panel trigger/clock output to the 86100D’s trigger input.

2. Requires 86100D mainframe (not compatible with 86100A/B/C).

3. This module is not compatible with the 86100A and 86100B DCA

mainframes. If you want to upgrade older DCAs, contact Keysight

Technologies to discuss current trade-in deals.

4. Supports both DCA-X and DCA-M platforms. For detailed

N1076A/N1077A specifications, refer to the data sheet located at

www.keysight.com/find/N1077A. Standalone clock recovery instruments

are controlled via a USB connection to an 86100D DCA-X mainframe or a

user-supplied PC running N1010A FlexDCA software.

5. Included with each of these TDR modules is a TDR trigger cable, two 50 Ω

SMA terminations and one SMA short.

Ordering Information (Continued)