37 | Keysight | InfiniiVision 6000 X-Series Oscilloscopes - Data Sheet

Search, navigate, and lister

Type

Edge, pulse width, rise/fall, runt, frequency peak, serial bus 1, serial bus 2

Copy

Copy to trigger, copy from trigger

Frequency peak

Source

Math functions

Max number of peaks

11

Control

Threshold, excursion, results order (frequency or amplitude)

Result display

Event lister or navigation. Manual or autoscroll via navigation or touch event lister entry to jump to a

specific event

Waveform measurements

Single cursor accuracy: ± [DC vertical gain accuracy + DC vertical offset accuracy + 0.21% full scale]

Number of measurements

56 automatic measurements, maximum of 10 displayed at a time

Cursors

2 pairs of XY cursors

Automatic measurement of positions, ΔX, 1/ΔX, ΔY, and ΔY/ΔX

Automatic

measurements

Measurements continuously updated with statistics. Cursors track last selected measurement.

Select up to 10 measurements from the list below:

Snapshot

Makes a snapshot of 31 most popular measurements. Touchable target to populate the

measurement side bar

Voltage/current

Peak-to-peak, maximum, minimum, amplitude, top, base, overshoot, preshoot, average- N cycles,

average-full screen, DC RMS-N cycles, DC RMS-full screen, AC RMS-N cycles, AC RMS-full screen

(standard deviation), ratio-N cycles, ratio-full screen

Time

Period, frequency, counter, + width, - width, burst width, + duty cycle, - duty cycle, bit rate, rise

time, fall time, delay, phase, X at min Y, X at max Y

Count

Positive pulse count, negative pulse count, rising edge count, falling edge count

Mixed

Area-N cycles, area-full screen

Jitter

Option DSOX6JITTER required

Data TIE, clock TIE, N-period, period-period, + width to + width, - width to - width

Real-time eye

Option DSOX6JITTER required

Eye width, eye height

Dual-channel (requires

N2820A probe)

Charge-N cycles, charge-full screen, peak-peak, amplitude, DC RMS-N cycles, DC RMS-full screen,

AC RMS- N cycles, AC RMS-full screen (standard deviation), average-N cycles, average-full screen,

base

Automatic

measurement logging

Available via BV0004B BenchVue

Counter

Built-in frequency counter (see “Precision counter/totalizer section” for the 10-digit counter)

Source

Any analog and digital channel

Resolution

5 digits

Max frequency

1 GHz (1.2 GHz typical)

1. Denotes warranted specifications; All others are typical. Specifications are valid after a 30-minute warm-up period and ± 10 °C from firmware calibration

temperature.

2. 1 mV/div is a magnification of 2 mV/div setting. For vertical accuracy calculations, use full scale of 16 mV for 1 mV/div sensitivity setting.

Performance Characteristics (Continued)