Rev A

DCPDL09 SERIES

Up to 9 Watts

DC DC Converter

Single and Dual Outputs

5/10/2016

Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •

Fax 603-778-9797

website: www.wallindustries.com • e-mail: sales@wallindustries.com

Page 3 of 6

SPECIFICATIONS

All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.

We reserve the right to change specifications based on technological advances.

SPECIFICATION

TEST CONDITIONS

Min

Typ

Max

Unit

GENERAL SPECIFICATIONS

Efficiency

See Table

Switching Frequency

Single

400

kHz

Dual

500

Isolation Voltage

1 minute

Input to Output

Standard Type

1600

VDC

Suffix “M”

1600

Input (Output) to Case

Suffix “M”

1600

Isolation Resistance

500VDC

1

G

Ω

Isolation Capacitance

Standard Type

50

pF

Suffix “M”

50

PHYSICAL SPECIFICATIONS

Weight

MIL-HDBK-217F, Full load

Standard Type

0.17oz (4.8g)

Suffix “M”

0.21oz (5.9g)

Dimensions (L x W x H)

Standard Type

0.86in x 0.44in x0.36in

(21.8mm x 11.2mm x 9.1mm)

Suffix “M”

0.86in x 0.44in x 0.38in

(21.8mm x 11.2mm x 9.6mm)

Case Material

Standard Type

Non-conductive black plastic

Suffix “M”

Copper

Base Material

None

Potting Material

Silicone (UL94 V-0)

SAFETY & EMC CHARACTERISTICS

Safety Approvals

EN60950-1

UL60950-1

IEC60950-1

EN62368-1

UL62368-1

IEC62368-1

EN55022

Class A

Class B

ESD

EN61000-4-2

Air ± 8kV and Contact ± 6kV

Perf. Criteria A

Radiated Immunity

EN61000-4-3

20 V/m

Perf. Criteria A

EN61000-4-4

±2kV

Perf. Criteria A

EN61000-4-5

±2kV

Perf. Criteria A

Conducted Immunity

EN61000-4-6

10 Vr.m.s

Perf. Criteria A

Power Frequency Magnetic Field

EN61000-4-8

100A/m continuous; 100A/m 1 second

Perf. Criteria A

NOTES

(1)

“x” in model name indicates the case type. “x” can be “S” to indicate standard (plastic) case or “M” to indicate metal case.

(2)

The standard modules either EMI Class A or Class B with external components. For further information, please contact factory.

(3)

An external input filter capacitor is required if the module is to meet EN61000-4-4 and EN61000-4-5. We suggest the following:

DCPDL09-12xxx & DCPDL09-24xxx recommend to use an aluminum electrolytic capacitor (Nippon chemi-con KY series, 220µF/100V) and a

TVS (SMDJ70A, 70V, 3000Watt peak pulse power) to connect in parallel.

DCPDL09-48xxx recommended to use an aluminum electrolytic capacitor (Nippon chemi-con KY series, 220µF/100V) and a TVS (SMDJ120A,

120V, 3000Watt peak pulse power) to connect in parallel.

CAUTION: This power module is not internally fused. An input line fuse must always be used.

*Due to advances in technology, specifications subject to change without notice.