SP6T RF Switch

Page 1 of 7

Notes

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.

B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.

C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled

to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp

CASE STYLE: MT1817

The Big Deal

Product Overview

JSW6-33DR+ is a high power reflective SP6T RF switch, with reflective short on output ports in the off con-

dition. Made using Silicon-on-Insulator process, it has very high IP3, a built-in CMOS driver and negative

voltage generator. Its tiny 2x2mm, 14-lead case enables wideband performance in tight spaces and dense

PCB layouts.

Feature

Advantages

Wideband operation

5-2700 MHz

Enables a single component to be used in a vast array of applications from VHF up to

2.7 GHz.

High IIP3:

55 dBm typ.

Results in little or negligible inter-modulation generation, meeting requirements for digital

communication signals.

Low Loss, 0.6 dB at 1 GHz

High input power, 3W

Low loss and high power capability enable a single switch to be used for a variety of ap-

plications, saving inventory.

Built in negative voltage generator

Operates with a single positive supply voltage; no need for DC blocking capacitors, un-

less external DC is present at the RF ports.

Built-in CMOS driver

No need for external driver, saving PCB space and cost.

Tiny MCLP package

2 x 2mm, 14-lead

Provides low inductance, repeatable transitions, and excellent thermal contact to PCB.

Key Features

50

Ω

5 to 2700 MHz

High Power 3W

• High Port count in super small size

• Single Positive Supply Voltage, 2.5 – 4.8V

• High Power P0.1dB, 3W typ.

• Low Insertion Loss, 0.6 dB at 1 GHz

JSW6-33DR+