For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824

Phone: 978-250-3343

Fax: 978-250-3373

Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

7

HMC490LP5 / 490LP5E

v04.0213

GaAs pHEMT MMIC LOW NOISE

HIGH IP3 AMPLIFIER, 12 - 16 GHz

Evaluation PCB

Item

Description

J1 - J2

PCB Mount SMA Connector

J3 - J8

DC Pin

C1 - C4

1000 pF Capacitor, 0402 Pkg.

C5 - C8

4.7 µF Capacitor, Tantalum

U1

HMC490LP5 / HMC490LP5E

108540 Evaluation PCB

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Rogers 4350

The circuit board used in the application should use

RF circuit design techniques. Signal lines should

have 50 Ohm impedance while the package ground

leads and package bottom should be connected

directly to the ground plane similar to that shown.

A sufficient number of via holes should be used

to connect the top and bottom ground planes.

The evaluation board should be mounted to an

appropriate heat sink. The evaluation circuit board

shown is available from Hittite upon request.

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D