9397 750 10031

Philips Semiconductors

PIP202-12M

DC to DC converter powertrain

© Koninklijke Philips Electronics N.V. 2002. All rights reserved.

Product data

Rev. 01 — 15 July 2002

19 of 20

9397 750 10031

Philips Semiconductors

PIP202-12M

DC to DC converter powertrain

© Koninklijke Philips Electronics N.V. 2002. All rights reserved.

Product data

Rev. 01 — 15 July 2002

19 of 20

Contact information

For additional information, please visit http://www.semiconductors.philips.com.

For sales office addresses, send e-mail to: sales.addresses@www.semiconductors.philips.com.

Fax: +31 40 27 24825

18. Data sheet status

[1]

Please consult the most recently issued data sheet before initiating or completing a design.

[2]

The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at

URL http://www.semiconductors.philips.com.

19. Definitions

Short-form specification — The data in a short-form specification is

extracted from a full data sheet with the same type number and title. For

detailed information see the relevant data sheet or data handbook.

Limiting values definition — Limiting values given are in accordance with

the Absolute Maximum Rating System (IEC 60134). Stress above one or

more of the limiting values may cause permanent damage to the device.

These are stress ratings only and operation of the device at these or at any

other conditions above those given in the Characteristics sections of the

specification is not implied. Exposure to limiting values for extended periods

may affect device reliability.

Application information — Applications that are described herein for any

of these products are for illustrative purposes only. Philips Semiconductors

make no representation or warranty that such applications will be suitable for

the specified use without further testing or modification.

20. Disclaimers

Life support — These products are not designed for use in life support

appliances, devices, or systems where malfunction of these products can

reasonably be expected to result in personal injury. Philips Semiconductors

customers using or selling these products for use in such applications do so

at their own risk and agree to fully indemnify Philips Semiconductors for any

damages resulting from such application.

Right to make changes — Philips Semiconductors reserves the right to

make changes, without notice, in the products, including circuits, standard

cells, and/or software, described or contained herein in order to improve

design and/or performance. Philips Semiconductors assumes no

responsibility or liability for the use of any of these products, conveys no

licence or title under any patent, copyright, or mask work right to these

products, and makes no representations or warranties that these products are

free from patent, copyright, or mask work right infringement, unless otherwise

specified.

Data sheet status[1]

Product status[2]

Definition

Objective data

Development

This data sheet contains data from the objective specification for product development. Philips Semiconductors

reserves the right to change the specification in any manner without notice.

Preliminary data

Qualification

This data sheet contains data from the preliminary specification. Supplementary data will be published at a

later date. Philips Semiconductors reserves the right to change the specification without notice, in order to

improve the design and supply the best possible product.

Product data

Production

This data sheet contains data from the product specification. Philips Semiconductors reserves the right to

make changes at any time in order to improve the design, manufacturing and supply. Changes will be

communicated according to the Customer Product/Process Change Notification (CPCN) procedure

SNW-SQ-650A.