Rev A

RBCAND21 SERIES

CAN Isolation Transceiver Module

Industrial Bus

12/5/2017

Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •

Fax 603-778-9797

website: www.wallindustries.com • e-mail: sales@wallindustries.com

Page 2 of 5

SPECIFICATIONS

All specifications are based on 25°C, Humidity <75%, Nominal Input Voltage, and Rated Output Load unless otherwise noted.

We reserve the right to change specifications based on technological advances.

SPECIFICATION

TEST CONDITIONS

Min

Typ

Max

Unit

ENVIRONMENTAL SPECIFICATIONS

Operating Temperature

-40

+105

ºC

Transportation & Storage Temperature

-50

125

ºC

Operating Humidity

Non-Condensing

10

90

%

Pin Welding Resistance Temperature

Welding spot is 1.5mm away from the casing, 10 seconds

300

ºC

Cooling Method

Free Air Convection

GENERAL SPECIFICATIONS

Isolation Voltage

Test for 1 minute, leakage current <1mA

3.0

kVDC

Insulation Resistance

Isolation Voltage 500VDC, Input-Output

1000

M

Ω

PHYSICAL SPECIFICATIONS

Weight

0.067oz (1.90g) Typ.

Dimensions (L x W x H)

DIP8

0.72in x 0.58in x 0.28in

(18.20mm x 14.80mm x 7.10mm)

SAFETY CHARACTERISTICS

Safety Standard & Certification

EN60950

Safety Class

Class III

EMI

CE

CISPR/EN55032

EMS

ESD

IEC/EN61000-4-2

Contact ±4kV

(Bare component, Signal Port)

Perf. Criteria A

RS

IEC/EN61000-4-3

10V/m (Bare Component)

Perf. Criteria A

EFT

IEC/EN61000-4-4

±2kV (Bare Component, Signal Port)

Perf. Criteria B

Surge IEC/EN61000-4-5

±2kV (Bare Component, Signal Port)

Perf. Criteria A

CS

IEC/EN61000-4-6

3Vr.m.s. (Bare Component)

Perf. Criteria A

NOTES

1.

See Fig. 3

2.

The performance indexes of the product models are as listed in the data sheet above, but some indexes of non-standard model products will

exceed the above mentioned requirements. Contact factory for specific information.

3.

PCB surface may have micro-color difference-this is a normal phenomenon & does not affect use of product.

4.

Products shall be classified according to ISO14001 and related environmental laws and regulations & should be handled by qualifying units.

5.

Customization available.

Application Precautions:

-Please read instructions carefully before use; call factory if you have questions.

-Do not use product in hazardous area

-This product is powered by DC power supply. 220VAC power supply is prohibited.

-Do not dismount and assemble the product without permission to avoid failure or malfunction of equipment.

-Ex factory inspection and quality control have been strictly conducted for this product. If any abnormal operation or possibility of failure occurs in

internal module, please contact factory for support.

*Due to advances in technology, specifications subject to change without notice.