www.austriamicrosystems.com

Revision 1.01

11 - 13

AS1702, AS1703, AS1704, AS1705

Data Sheet

Package Drawings and Markings

8.2 Package Drawings and Markings

Figure 7. MSOP-10 Package

Notes:

1. All dimensions are in millimeters (angle in degrees), unless oth-

erwise specified.

2. Datums B and C to be determined at datum plane H.

3. Dimensions D and E1 are to be determined at datum plane H.

4. Dimensions D2 and E2 are for top package and D and E1 are for

bottom package.

5. Cross section A-A to be determined at 0.12 to 0.25mm from the

lead tip.

6. Dimensions D and D2 do not include mold flash, protrusion, or

gate burrs.

7. Dimension E1 and E2 do not include interlead flash or protrusion.