DS1410D

021798 2/2

DS1410D SOFTWARE

The DS1410D Development Kit contains access sys-

tem software which must be linked with the application

software in order to complete integration. The support

for the application development environments and

operating systems lies in the interface software of the

access system. The access system contains the low

level interface for communicating with the Buttons.

NOTE: The DS1410D is not object code compatible

with the DS1410. However, both object modules can

co–exist to provide support for both holders.

DS1410D HARDWARE

The DS1410D passes through all the parallel port I/O

lines, which allows them to be stacked with other

DS1410D’s or other parallel port resident devices.

The DS1410D attaches directly to the PC parallel port.

If use of a printer is desired, the DS1410D should reside

between the parallel port and the printer cable. With

system and printer both off, simply plug the 25–pin male

D connector side of the DS1410D into the PC parallel

port and then plug the printer cable into the 25–pin

female D connector side of the DS1410D. The top and

bottom screws that reside on the DS1410D and the

printer cable should then be tightened accordingly.

Attaching another parallel port device is not required to

operate the DS1410D.

To cascade DS1410D’s, simply follow the same direc-

tions as above, inserting DS1410D 25–pin D male and

female connectors accordingly.