HAL1860 datasheet(5/30 Pages) MICRONAS

5 / 30 page

DATA SHEET

HAL 1860

TDK-Micronas GmbH

May 4, 2017; DSH000187_001EN

1.1. Major Applications

Thanks to the sensors’ robust and cost-effective design, the HAL 1860 is the optimal

system solution for applications such as:

– Small-angle or linear position measurements

– Gear position detection

– Current sensing for battery management

– Rotary selector

1.2. Features

– Ratiometric linear output proportional to the magnetic field

– Digital signal processing

– Continuous measurement ranges from 40 mT to 160 mT

(20 mT available for test purpose only)

– Selectable clamping levels with selectable diagnosis

– Comprehensive diagnostic feature set

– Lock function and built-in redundancy for EEPROM memory

– Programmable temperature characteristics for matching all common magnetic materials

– Programming via output pin or supply voltage modulation

– On-chip temperature compensation

– Active offset compensation

– Operates from

40 °C up to 170 °C junction temperature

– Operates from 4.5 V up to 5.5 V supply voltage in specification

– Operates with static and dynamic magnetic fields up to 5 kHz

– Selectable sampling rate (8 kHz or 16 kHz)

– Overvoltage and reverse-voltage protection at VSUP pin

– Magnetic characteristics extremely robust against mechanical stress

– Short-circuit protected push-pull output

– EMC and ESD optimized design

– AEC-Q100 qualified

HAL1860 датащи(PDF) 5 Page - Micronas