CCG3PA datasheet(36/37 Pages) CYPRESS

36 / 37 page

Document Number: 002-16951 Rev. *F

Page 36 of 37

EZ-PD™ CCG3PA Datasheet

*E (contd)

5984670

VGT

12/06/2017

Table 35: Added V_IN_3 and V_IN3_DS parameters and renumbered spec IDs from

SID.DC.VR.1 to SID.DC.VR.12.

Added Table 36.

Table 39: Updated min and max values for SID.ADC.4.

Table 42: Added new MPN CYPD3174-24LQXQ. Modified "Application" column of

CYPD3174-16SXQ and CYPD3175-24LQXQ MPNs.

Removed Errata.

Added Table 43, Table 44 and Table 45 to Packaging section.

6079226

VGT

03/02/2018

Added “The voltage reference for the ADCs is generated either from the VDDD supply or from

internal bandgap. When sensing the GPIO pin voltage with an ADC, the pin voltage cannot

exceed the VDDIO supply value” to ADC section.

Table 2: Updated the Descripion “GPIO with Open drain with pull-up assist. Configurable as

GPIO_20VT/I2C_SDA_1/IEC. Tolerant to temporary short to VBUS pin” for Pins P2.2 and P2.3.

Table 7: Removed SBU1, SBU2 reference in Details/Conditions for Spec ID SID.GIO#17.

Table 32: Moved “0.003” to Typ column for the Spec ID SID.GD.9 and SID.GD.10.

Table 12: Updated typical and max values for II2C4 parameter.

Table 9: Removed GPIO_20VT_Voh parameter.

Table 28: Updated max values of Csa_SCP_Acc parameters.

Table 39: Updated the Description of Spec ID SID.ADC.6 as “ADC reference voltage when

generated from band gap.”. Removed SID.ADC.5 parameter and added SID.ADC.2A and

SID.ADC.3A parameters. Updated Details/Conditions of SID.ADC.2 and SID.ADC3

parameters.

Table 35: Added units (V) to SID.DC.VR.3, SID.DC.VR.4 and SID.DC.VR.5 parameters.

Updated VBUS Short Protection and I/O Subsystem sections.

Updated Table 3 with information on Fault Indicator and VBUS Short Protection Capability.

Updated Application Diagrams section.

Document Title: EZ-PD™ CCG3PA Datasheet, USB Type-C Port Controller

Document Number: 002-16951

CCG3PA датащи(PDF) 36 Page - Cypress Semiconductor