| поискавой системы для электроныых деталей |
|
AD660ARZ датащи(PDF) 13 Page - Analog Devices |
|
|
|||||||||||||||||||||||||||||
AD660ARZ датащи(HTML) 13 Page - Analog Devices |
|
13 / 21 page ![]() AD660 Rev. B | Page 12 of 20 It is also possible to use external references other than 10 V with slightly degraded linearity specifications. The recommended range of reference voltages is 5 V to 10.24 V, which allows 5 V, 8.192 V, and 10.24 V ranges to be used. For example, by using the AD586 5 V reference, outputs of 0 V to 5 V unipolar or ±5 V bipolar can be realized. Using the AD586 voltage reference makes it possible to operate the AD660 with ±12 V supplies with 10% tolerances. Figure 12 shows the AD660 using the AD586 precision 5 V reference in the bipolar configuration. The highest grade AD586MN is specified with a drift of 2 ppm/°C, which is a 7.5× improvement over the AD660 internal reference. This circuit includes two optional potentiometers and one optional resistor that can be used to adjust the gain, offset, and bipolar zero errors in a manner similar to that described in the Bipolar Configuration section. Use −5.000000 V and +4.999847, as the output values. The AD660 can also be used with the AD587 10 V reference, using the same configuration shown in Figure 12 to produce a ±10 V output. The highest grade AD587UQ is specified at 5 ppm/°C, which is a 3× improvement over the AD660 internal reference. Figure 13 shows the AD660 using the AD688 precision ±10 V reference, in the unipolar configuration. The highest grade AD688BQ is specified with a temperature coefficient of 1.5 ppm/°C. The ±10 V output is also ideal for providing precise biasing for the offset trim resistor, R4. HBE CONTROL LOGIC SER CLR LDAC REF IN GND TRIM VOUT VIN R1 50Ω R2 10kΩ R2 50Ω REF OUT AD660 AD586 SOUT VOUT AGND SPAN/ BIPOLAR OFFSET DGND –VEE +VCC +VLL 10V REF 16-BIT LATCH 16-BIT DAC 16 17 18 19 23 24 20 21 22 13 1 2 3 4 15 OUTPUT 6 5 4 2 10kΩ 10kΩ 10.05kΩ DB1/DB9/ DATADIR 11 LBE/ CLEAR SELECT DB0/ DB8/ SIN CS DB7/ DB15 5 12 14 16-BIT LATCH Figure 12. Using the AD660 with the AD586 5 V Reference |
|
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |