 |
поискавой системы для электроныых деталей |
|
|
поискавой системы для электроныых деталей |
|
TUSB1044 датащи(PDF) 43 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
TUSB1044 датащи(HTML) 43 Page - Texas Instruments |
|
|
43 / 67 page  43 TUSB1044 www.ti.com SLLSF47A – FEBRUARY 2018 – REVISED FEBRUARY 2018 Product Folder Links: TUSB1044 Submit Documentation Feedback Copyright © 2018, Texas Instruments Incorporated 7.6.1.10 DFP1_EQ Register (Offset = 21h) [reset = 0h] DFP1_EQ is shown in Figure 32 and described in Table 21. Return to Summary Table. Figure 32. DFP1_EQ Register 7 6 5 4 3 2 1 0 DTX1EQ_SEL DRX1EQ_SEL R/W-0h R/W-0h Table 21. DFP1_EQ Register Field Descriptions Bit Field Type Reset Description 7-4 DTX1EQ_SEL R/W 0h Field selects EQ for DTX1P/N pins. When EQ_OVERRIDE = 0b, this field reflects the sampled state of DEQ[1:0] pins. When EQ_OVERRIDE = 1b, software can change the EQ setting for DTX1P/N pins based on value written to this field. 3-0 DRX1EQ_SEL R/W 0h Field selects EQ for DRX1P/N pins. When EQ_OVERRIDE = 0b, this field reflects the sampled state of DEQ[1:0] pins. When EQ_OVERRIDE = 1b, software can change the EQ setting for DRX1P/N pins based on value written to this field. 7.6.1.11 USB3_MISC Register (Offset = 22h) [reset = 4h] USB3_MISC is shown in Figure 33 and described in Table 22. Return to Summary Table. Figure 33. USB3_MISC Register 7 6 5 4 3 2 1 0 CM_ACTIVE LFPS_EQ U2U3_LFPS_D EBOUNCE DISABLE_U2U 3_RXDET DFP_RXDET_INTERVAL USB_COMPLIANCE_CTRL RH-0h R/W-0h R/W-0h R/W-0h R/W-1h R/W-0h Table 22. USB3_MISC Register Field Descriptions Bit Field Type Reset Description 7 CM_ACTIVE RH 0h Compliance mode status. 0h = Not in USB3.1 compliance mode. 1h = In USB3.1 compliance mode. 6 LFPS_EQ R/W 0h Controls whether settings of EQ based on URX[2:1]EQ_SEL, UTX[2:1]EQ_SEL, DRX[2:1]EQ_SEL, and DTX[2:1]EQ_SEL applies to received LFPS signal. 0h = EQ set to zero when receiving LFPS 1h = EQ set by the related registers when receiving LFPS. 5 U2U3_LFPS_DEBOUNCE R/W 0h Controls whether or not incoming LFPS is debounced or not. 0h = No debounce of LFPS before U2/U3 exit. 1h = 200us debounce of LFPS before U2/U3 exit. 4 DISABLE_U2U3_RXDET R/W 0h Controls whether or not Rx.Detect is performed in U2/U3 state. 0h = Rx.Detect in U2/U3 enabled. 1h = Rx.Detect in U2/U3 disabled. 3-2 DFP_RXDET_INTERVAL R/W 1h This field controls the Rx.Detect interval for the downstream facing port (DTX1P/N and DTX2P/N). 0h = 8ms 1h = 12ms 2h = Reserved 3h = Reserved. |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Russian ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
