ACE16428B datasheet(3/8 Pages) ACE

3 / 8 page

ACE16428B

N-Channel Enhancement Mode Field Effect Transistor

VER 1.1

Electrical Characteristics TA=25 OC unless otherwise noted

Parameter

Symbol

Conditions

Min.

Typ.

Max.

Unit

Static

Drain-Source Breakdown Voltage

V(BR)DSS

VGS=0V, ID=250uA

Zero Gate Voltage Drain Current

IDSS

VDS=30V, VGS=0V

Gate Threshold Voltage

VGS(th)

VDS=VGS, IDS=250uA

1.6

Gate Leakage Current

IGSS

VGS=±20V, VDS=0V

±100

Static Drain-Source On-Resistance

RDS(ON)

VGS=10V, ID=12A

4.5

VGS=4.5V, ID=10A

6.5

10.5

Forward Transconductance

gFS

VDS=10V, ID=12A

Diode Forward Voltage

VSD

ISD=2A, VGS=0V

0.71

1.0

Maximum Body-Diode Continuous

Current

Switching

Total Gate Charge

VDS=15V, ID=12A

VGS=5V

Gate-Source Charge

Qgs

2.7

Gate-Drain Charge

Qgd

2.5

Turn-On Delay Time

Td(on)

VDS=15V, VGS=10V

RGEN=6

Ω, R

L=15

Turn-On Rise Time

Turn-Off Delay Time

td(off)

Turn-Off Fall Time

Dynamic

Input Capacitance

Ciss

VDS=15V, VGS=0V

f=1MHz

1625

Output Capacitance

Coss

190

Reverse Transfer Capacitance

Crss

132

Note:

The value of RθJA is measured with the device mounted on 1in² FR-4 board with 2oz. Copper, in a still air environment with

TA=25°C. The Power dissipation PDSM is based on RθJA and the maximum allowed junction temperature of 150°C. The

value in any given application depends on the user's specific board design.

The power dissipation PD is based on TJ(MAX)=150°C, using junction-to-case thermal resistance, and is more useful in

setting the upper dissipation limit for cases where additional heatsinking is used.

Repetitive rating, pulse width limited by junction temperature TJ(MAX)=150°C. Ratings are based on low frequency and duty

cycles to keep initial TJ =25°C.

The RθJA is the sum of the thermal impedence from junction to case RθJC and case to ambient.

The static characteristics in Figures 1 to 6 are obtained using <300μs pulses, duty cycle 0.5% max.

These curves are based on the junction-to-case thermal impedence which is measured with the device mounted to a large

heatsink, assuming a maximum junction temperature of TJ(MAX)=150°C. The SOA curve provides a single pulse rating.

The maximum current rating is package limited.

These tests are performed with the device mounted on 1in² FR-4 board with 2oz. Copper, in a still air environment with

TA=25°C

ACE16428B датащи(PDF) 3 Page - ACE Technology Co., LTD.

ACE16428B датащи(HTML) 3 Page - ACE Technology Co., LTD.

Html Pages

1 2 3 4 5 6 7 8

датащи скачать

ссылки URL