TDS7000B datasheet(8/12 Pages) ETC

8 / 12 page

Oscilloscopes •

www.tektronix.com/tds7000B

Digital Phosphor Oscilloscopes

TDS7000B Series

Computer System and

Peripherals

CPU –

TDS7104/TDS7054: Intel Celeron processor,

850 MHz.

TDS7154B/TDS7254B/TDS7404B/TDS7704B:

Intel Pentium 4 processor, 2.0 GHz.

PC System Memory – 512 MB.

Hard Disk Drive – 40 GB removable hard disk

drive: rear-panel or (B models only) front-panel,

(option FHD).

Floppy Disk Drive – 1.44 MB 3.5 in floppy disk

drive: front-panel, or (B models only) rear-panel

(option FHD).

CD-R/W Drive – Rear-panel CD-R/W drive with CD

creation software application.

Mouse – Thumb wheel model included, USB

interface.

Keyboard – Order 118-9402-00 for small

keyboard (fits in pouch); PS-2 interface. Order

119-6633-00 for full-size keyboard; USB

interface and hub.

Input/Output Ports

Probe Compensator Output – Front panel BNC

connector, requires Probe Cal-Deskew Fixture

(included) for probe attachment. Amplitude 200 mV

(TDS7104/TDS7054) or 500mV (B models) ±20%

into a 50

Ω load, frequency 1 kHz ±5%.

Analog Signal Output Amplitude – Front-panel

BNC connector, provides a buffered version of the

signal that is attached to the Ch 3 input when Ch 3

is selected as trigger source. 20 mV/div ±20% into

a 1.8 M

Ω load, 10 mV/div ±20% into a 50 Ω load.

Analog Signal Output Bandwidth, Typical –

TDS7054, TDS7104: 100 MHz into a 50

Ω load.

TDS7154B/TDS7254B/TDS7404B/TDS7704B:

1 GHz into a 50

Ω load.

External Time Base Reference In – Rear-panel

BNC connector, time base system can phase-lock

to external 10 MHz reference.

Time Base Reference Out – Rear-panel BNC con-

nector, accepts TTL-compatible output of internal

10 MHz reference oscillator.

Auxiliary Output Levels – Front-panel BNC

connector, provides a TTL-compatible, polarity

switchable pulse when the oscilloscope triggers.

Parallel Port – IEEE 1284, DB-25 connector.

Audio Ports – Miniature phone jacks for stereo

microphone input and stereo line output.

USB Port – Allows connection or disconnection of

USB keyboard and/or mouse while oscilloscope

power is on. B models have 2 USB ports.

Keyboard Port – PS-2 compatible.

Mouse Port – PS-2 compatible.

LAN Port – RJ-45 connector, supports 10Base-T

and 100Base-T.

Serial Port – DB-9 COM1 port.

Windows Video Port – 15 pin D-Sub connector

on the rear panel; connect a second monitor to

use dual-monitor display mode. Video is DDC2B

compliant.

GPIB Port – IEEE 488.2 standard.

Oscilloscope Video Port – 15 pin D-Sub connector

on the rear panel, video is IBM XGA compatible on

B models. Connect to show the oscilloscope

display, including live waveforms on an external

monitor or projector. The primary Windows desktop

can also be displayed on an external monitor using

this port.

Power Source

Power – 100 to 240 V

RMS ±10%, 50/60 Hz;

115 V

RMS ±10%, 400 Hz; CAT II, <300 W (450 VA).

TDS7000B датащи(PDF) 8 Page - List of Unclassifed Manufacturers

TDS7000B датащи(HTML) 8 Page - List of Unclassifed Manufacturers

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

датащи скачать

ссылки URL