| поискавой системы для электроныых деталей |
|
DA9213 датащи(PDF) 39 Page - Dialog Semiconductor |
|
|
|||||||||||||||||||||||||||||
DA9213 датащи(HTML) 39 Page - Dialog Semiconductor |
|
39 / 62 page ![]() DA9213, DA9214, and DA9215 Multi-Phase 5A/Phase DC-DC Buck Converter Datasheet Revision 2.2 23-Oct-2017 CFR0011-120-00 39 of 62 © 2017 Dialog Semiconductor 7.5 Internal Temperature Supervision To protect DA9213, DA9214, and DA9215 from damage due to excessive power dissipation, the internal temperature is continuously monitored. There are three temperature thresholds, as shown in Table 12. Table 12: Over-Temperature Thresholds Temperature Threshold Typical Temperature Setting Interrupt Event Status Bit Masking Bit TEMP_WARN 125 °C E_TEMP_WARN TEMP_WARN M_TEMP_WARN TEMP_CRIT 140 °C E_TEMP_CRIT TEMP_CRIT M_TEMP_CRIT TEMP_POR 150 °C When the junction temperature reaches the TEMP_WARN threshold, DA9213, DA9214, and DA9215 will assert the bit TEMP_WARN and will generate the event E_TEMP_WARN. If not masked using bit M_TEMP_WARN, the output port nIRQ will be asserted. The status bit TEMP_WARN will remain asserted as long as the junction temperature remains higher than TEMP_WARN. When the junction temperature increases further to TEMP_CRIT, DA9213, DA9214, and DA9215 will immediately disable the buck converter, assert the bit TEMP_CRIT, and will generate the event E_TEMP_CRIT. If not masked via bit M_TEMP_CRIT, the output port nIRQ will be asserted. The status bit TEMP_CRIT will remain asserted as long as the junction temperature remains higher than TEMP_CRIT. The buck converter will be kept disabled as long as the junction temperature is above TEMP_CRIT. It will not be automatically re-enabled even after the temperature drops below the valid threshold (even if the controlling GPI is asserted). A direct write into BUCKA_EN or BUCKB_EN, or a toggling of the controlling GPI, is needed to enable the buck converter. Whenever the junction temperature exceeds TEMP_POR, a power on reset to the digital core is immediately asserted, which stops all functionalities of DA9213, DA9214, and DA9215. This is needed to prevent possible permanent damage in the case of a rapid temperature increase. |
|
ссылки URL |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |