A

H

B

G

3

2

4

1

Tolerances if not otherwise shown

According to DIN ISO 2768-1

Linear measures:

Up to 30mm class

M, otherwise class C.

According to DIN ISO 2768-2

Form and position: class L

SCALE

1:1

SHEET

4/4

SIZE

A3

PRODUCT

FIRST ANGLE PROJECTION:

This drawing is the property

of LEDiL Oy. It may not be

reproduced, copied or

communicated without a written

agreement with LEDiL Oy.

MECHANICAL DRAWING

GABRIELLA-MIDI

1. Place holder on PCB using the holder location pins as guide

elements. Holder is fixed either by with on-board PU-tape or M3

screw with max 0.6Nm torgue.

2. Place lens support features into relative holes in the

holder, please note that the location pins on the lens goes

through the PCB.

3.Press optic until 4 clips each locked.

Clip (x4)

Lens support (x2)