ADATE320KCPZ datasheet(26/83 Pages) AD

26 / 83 page

Data Sheet

ADATE320

Rev. B | Page 25 of 82

ABSOLUTE MAXIMUM RATINGS

Table 15.

Parameter

Rating

Supply Voltages

Positive Supply Voltage (VCC to PGND)

−0.5 V to +9.0 V

Positive Supply Voltage (VDD to DGND)

−0.5 V to +2.2 V

Negative Supply Voltage (VEE to PGND)

−6.0 V to +0.5 V

Supply Voltage Difference (VCC to VEE)

−1.0 V to +15.0 V

Reference Ground (DUTGND to AGND)

−0.5 V to +0.5 V

Supply Sequence or Dropout Condition

No limitations

Input/Output Voltages

Digital Input Voltage Range

−0.5 V to VDD + 0.5 V

VREF Input Voltage Range

−0.5 V to +3.5 V

VREFGND, DUTGND Input Voltage Range

−0.5 V to +0.5 V

DUTx Output Short-Circuit Voltage1

−3.0 V to +6.0 V

High Speed Termination (VTTCx,

VTTDx) Input Voltage Range

−0.5 V to +2.2 V

High Speed DATx/RCVx Common-

Mode Input Voltage Range2

−0.5 V to +2.2 V

High Speed DATx/RCVx Differential

Mode Input Voltage Range2

−1.0 V to +1.0 V

High Speed CMPHx/CHPLx, PPMU_

CMPHx/PPMU_CMPLx Absolute

Output Voltage Range

−0.5 V to +2.2 V

DUTx Input/Output Pin Current Limit

DCL Maximum Short-Circuit Current3

±120 mA

Operating Temperature, Junction

125°C

Storage Temperature Range

−65°C to +150°C

RL = 0 Ω, VDUTx continuous short-circuit condition (VIH, VIL, VIT), high-Z,

VCOM, and all clamp modes.

DATx, DATx, RCVx, RCVx, RSOURCE = 0 Ω, no pin to exceed either maximum

common-mode input range or differential mode input range.

RL = 0 Ω, VDUTx = −3 V to +6 V; DCL current limit. Continuous short-circuit condition.

The ADATE320 is designed to withstand continuous short-circuit fault.

Stresses at or above those listed under Absolute Maximum

Ratings may cause permanent damage to the product. This is a

stress rating only; functional operation of the product at these

or any other conditions above those indicated in the operational

section of this specification is not implied. Operation beyond

the maximum operating conditions for extended periods may

affect product reliability.

THERMAL CHARACTERISTICS

θJA is specified for the worst case conditions, that is, a device

soldered in a circuit board for surface-mount packages.

Table 16. Thermal Resistance

PackageType

Airflow Velocity (m/sec)

θJA

θJC

Unit

84-Lead

LFCSP

N/A1

3.2

°C/W

N/A1

°C/W

N/A1

°C/W

N/A1

°C/W

N/A means not applicable.

EXPLANATION OF TEST LEVELS

Definition.

Design verification simulation.

100% production tested.

Functionally checked during production test.

Characterized on tester.

Characterized on bench.

ESD CAUTION

ADATE320KCPZ датащи(PDF) 26 Page - Analog Devices

ADATE320KCPZ датащи(HTML) 26 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83

датащи скачать

ссылки URL