AD676

REV. A

–5–

ORDERING GUIDE

Package

Model

Temperature Range

1

S/(N+D)

Max INL

Package Description

Option

2

AD676JD

0

°C to +70°C

85 dB

Ceramic 28-Pin DIP

D-28

AD676KD

0

°C to +70°C

87 dB

±1.5 LSB

Ceramic 28-Pin DIP

D-28

AD676AD

–40

°C to +85°C

85 dB

Ceramic 28-Pin DIP

D-28

AD676BD

–40

°C to +85°C

87 dB

±1.5 LSB

Ceramic 28-Pin DIP

D-28

NOTES

ABSOLUTE MAXIMUM RATINGS*

AGND to DGND . . . . . . . . . . . . . . . . . . . . . . . . . . . .

±0.3 V

Digital Inputs to DGND . . . . . . . . . . . . . . . . . . 0 V to +5.5 V

Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +300

°C, 10 sec

Storage Temperature . . . . . . . . . . . . . . . . . . –65

°C to +150°C

*Stresses greater than those listed under “Absolute Maximum Ratings” may cause

permanent damage to the device. This is a stress rating only and functional

operation of the device at these or any other conditions above those indicated in

the operational section of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect device reliability.

WARNING!

ESD SENSITIVE DEVICE

CAUTION

The AD676 features input protection circuitry consisting of large “distributed” diodes and

polysilicon series resistors to dissipate both high energy discharges (Human Body Model) and fast,

low energy pulses (Charged Device Model). Per Method 3015.2 of MIL-STD-883C, the AD676

has been classified as a Category 1 Device.

Proper ESD precautions are strongly recommended to avoid functional damage or performance

degradation. Charges as high as 4000 volts readily accumulate on the human body and test

equipment, and discharge without detection. Unused devices must be stored in conductive foam

or shunts, and the foam discharged to the destination socket before devices are removed. For further

information on ESD Precaution. Refer to Analog Devices’ ESD Prevention Manual.