| поискавой системы для электроныых деталей |
|
SP60.. дистрибьютор |
| дистрибьютор | номер детали | производитель | подробное описание детали | Price | Qty. BuyNow | |
![]() Verical | SP600 | Harris Semiconductor | SP600 |
| 2,800 | |
| SP60405MR | APX Technologies | SP60405MR |
| 25 | ||
| SP60905MSR | APX Technologies | SP60905MSR |
| 5 | ||
![]() Avnet Americas | BLM21SP601SZ1D | Murata Manufacturing Co Ltd | - Tape and Reel (Alt: BLM21SP601SZ1D) RoHS : Compliant |
| 72,000 | |
| BLM21SP601SN1D | Murata Manufacturing Co Ltd | Ferrite Bead, 0805 [2012 Metric], 600 ohm, 2.3 A, EMIFIL BLM21SP Series, 0.06 ohm, ? 25% - Tape and Reel (Alt: BLM21SP601SN1D) RoHS : Compliant |
| 4,000 | ||
| PSP-600-24 | Mean Well | - Boxed Product (Development Kits) (Alt: PSP-600-24) RoHS : Compliant |
| 68 | ||
| PSP-600-12 | Mean Well | - Boxed Product (Development Kits) (Alt: PSP-600-12) RoHS : Compliant |
| 5 | ||
| RS6011SP6003 | Alpine Electronics (Asia) Ltd | Slide Potentiometer Standard Type, 10 kohm, ? 20%, 200 mW, Linear, Through Hole - Trays (Alt: RS6011SP6003) RoHS : Compliant |
| 4 | ||
| PSP-600-48 | Mean Well | - Boxed Product (Development Kits) (Alt: PSP-600-48) RoHS : Compliant |
| 3 | ||
| MSP-600-5 | Mean Well | - Boxed Product (Development Kits) (Alt: MSP-600-5) RoHS : Compliant |
| 0 | ||
| 50SP60-01-2-02N | Grayhill Inc | Switch Rotary DPDT 2 Flatted Shaft PC Pins 0.2A 220VAC 28VDC - Bulk (Alt: 50SP60-01-2-02N) RoHS : Compliant |
| 0 | ||
| 50SP60-01-1-03N | Grayhill Inc | Switch Rotary SP3T 3 Flatted Shaft PC Pins 0.2A 220VAC 28VDC - Bulk (Alt: 50SP60-01-1-03N) RoHS : Compliant |
| 0 | ||
| PSP-600-13.5 | Mean Well | - Boxed Product (Development Kits) (Alt: PSP-600-13.5) RoHS : Compliant |
| 0 | ||
| DSP60-24 | TDK Corporation | - Bulk (Alt: DSP60-24) RoHS : Compliant |
| 0 | ||
| 25BSP60-B-1-06C | Grayhill Inc | Mechanical Encoder 6-Pin - Bulk (Alt: 25BSP60-B-1-06C) RoHS : Compliant |
| 0 | ||
| 25BSP60-B-1-06F | Grayhill Inc | Mechanical Encoder 6-Pin - Bulk (Alt: 25BSP60-B-1-06F) RoHS : Compliant |
| 0 | ||
| BSP60H6327XTSA1 | Infineon Technologies AG | Trans Darlington PNP 45V 2A 4-Pin SOT-223 T/R - Tape and Reel (Alt: BSP60H6327XTSA1) RoHS : Compliant |
| 0 | ||
| 50SP60-01B06N | Grayhill Inc | ROTARY SWITCH, SHAFT/PANEL SEAL, PC MOUNT, 60°, 1 DECK, - Bulk (Alt: 50SP60-01B06N) RoHS : Not Compliant |
| 0 | ||
![]() Newark | BLM21SP601BH1D | Murata Manufacturing Co Ltd | Ferrite Bead, Aec-Q200, 600 Ohm, 0805; |Murata Manufacturing Co., Ltd. BLM21SP601BH1D RoHS : Compliant |
| 6,046 | |
| BLM21SP601BH1D | Murata Manufacturing Co Ltd | Ferrite Bead, Aec-Q200, 600 Ohm, 0805; |Murata Manufacturing Co., Ltd. BLM21SP601BH1D RoHS : Compliant |
| 6,046 | ||
| FMC0808240/SP-60 | Fairview Microwave Inc | Rf/Coaxial Cable Assembly; |Fairview Microwave FMC0808240/SP-60 RoHS : Not Compliant |
| 185 | ||
| SP6014C100000 | Molveno | Switch, Pb, Sp Mom, 22Mm, No Cap; |Molveno SP6014C100000 RoHS : Compliant |
| 88 | ||
| TSP 600-124 | Traco Power | Ac/Dc Din Rail Power Supply, Industrial,; |Traco Power TSP 600-124 RoHS : Compliant |
| 20 | ||
| AWSP60-12 | Triad Magnetics | Ac-Dc Converter, Enclosed, 1 O/P, 60W, 5A, 12V; Power Supply Applications:Ite; No. Of Outputs:1Outputs; Output Power Max:60W; Output Voltage - Output 1:12V; Output Current - Output 1:5A; Output Voltage - Output 2:-; Frequency:63Hz Rohs Compliant: Yes RoHS : Compliant |
| 14 | ||
| AMESP600-48SMNZ | Aimtec | Ac-Dc Converter, 48V, 12.6A; Power Supply Applications:Ite, Household & Medical; No. Of Outputs:1Outputs; Output Power Max:600W; Output Voltage - Output 1:48V; Output Current - Output 1:12.6A; Output Voltage - Output 2:- Rohs Compliant: Yes RoHS : Compliant |
| 7 | ||
| AMESP600-24SMNZ | Aimtec | Ac-Dc Converter, 24V, 25A; Power Supply Applications:Ite, Household & Medical; No. Of Outputs:1Outputs; Output Power Max:600W; Output Voltage - Output 1:24V; Output Current - Output 1:25A; Output Voltage - Output 2:- Rohs Compliant: Yes RoHS : Compliant |
| 6 | ||
| TSP 600-124 | Traco Power | Ac-Dc Converter, Din Rail, 1 O/P, 600W, 25A, 24V; Power Supply Applications:Ite; No. Of Outputs:1 Output; Output Power Max:600W; Output Voltage - Output 1:24Vdc; Output Current - Output 1:25A; Output Voltage - Output 2:-; Width:165Mmrohs Compliant: Yes RoHS : Compliant |
| 4 | ||
| FMC0103400/SP-60 | Fairview Microwave Inc | Rf - Coaxial Cable Assemblies; |Fairview Microwave FMC0103400/SP-60 RoHS : Not Compliant |
| 3 | ||
| PSP-600-15 | Mean Well | Power Supply, Ac-Dc, 15V, 40A; |Mean Well PSP-600-15 RoHS : Compliant |
| 2 | ||
| VSP6037L-58 | Calian | Rf Antenna, 1.61Ghz To 1.539Ghz; |Calian VSP6037L-58 RoHS : Compliant |
| 2 | ||
| TSP 600-148 | Traco Power | Psu, Ac/Dc, Din Rail, Ind, Adj, Fixed; |Traco Power TSP 600-148 RoHS : Compliant |
| 2 | ||
| FMCA2163/SP-60 | Fairview Microwave Inc | Product Range:Fmca2163/Sp Series; |Fairview Microwave FMCA2163/SP-60 RoHS : Not Compliant |
| 2 | ||
| PSP-600-13.5 | Mean Well | Power Supply, Ac-Dc, 13.5V, 44.5A; |Mean Well PSP-600-13.5 RoHS : Compliant |
| 1 | ||
![]() RS | 10120 (HLSP6-05) | Heyco | PCB SUPPORT, BAYONET SNAP LOCK 10.9/ARROWHEAD SNAP LOCK, HLSP6 SERIES |
| 1,000 | |
| DSP60-24 (DRL60-24-1) | TDK-Lambda Corporation | POWER SUPPLY, AC-DC,24V,2.5A,90-264V IN, ENCLOSED, DIN RAIL, PFC,60W, DSP SERIES |
| 871 | ||
| PSP-600-48 | Mean Well | POWER SUPPLY, AC-DC,48V,12.5A,115-264V IN, ENCLOSED, PANEL MOUNT, PFC, PSP-600 SERIES RoHS : Compliant |
| 120 | ||
| MSP-600-48 | Mean Well | POWER SUPPLY, AC-DC,48V@13A, 5V@0.3A,100-264V IN, ENCLOSED, MEDICAL, PFC, MSP SERIES RoHS : Compliant |
| 36 | ||
| TSP 600-124 | Traco Power | 600W AC/DC POWER SUPPLY IN A DIN-RAIL MOUNT METAL CASE |
| 34 | ||
| DSP60-15 (DRL60-15-1) | TDK-Lambda Corporation | POWER SUPPLY, AC-DC, 15V, 4A, 90-264V IN, ENCLOSED, DIN RAIL, PFC,60W, DSP SERIES |
| 22 | ||
| PSP-600-24 | Mean Well | POWER SUPPLY, AC-DC, ENCLOSED, 600W, 24V@25A, 88-264V IN, PSP-600 SERIES RoHS : Compliant |
| 12 | ||
| TSP 600-148 | Traco Power | 600W AC/DC POWER SUPPLY IN A DIN-RAIL MOUNT METAL CASE |
| 10 | ||
| PSP-600-27 | Mean Well | POWER SUPPLY, AC-DC, ENCLOSED, 600W, 27V@22.2A, 88-264V IN, PSP-600 SERIES RoHS : Compliant |
| 3 | ||
| FLUKE-301D/ESP (6016352) | Fluke Calibration | FLUKE-301D/ESP,600A AC/DC CLAMP METER WITH SLIM BODY AND THIN JAW ARM |
| 3 | ||
| TSP6088 | L-com Inc | PLUG, RJ45 CAT6A 100PK |
| 2 | ||
| PSP-600-15 | Mean Well | POWER SUPPLY, AC-DC, ENCLOSED, 600W, 15V@40A, 88-264V IN, PSP-600 SERIES RoHS : Compliant |
| 2 | ||
| AWSP60-5 | Triad Magnetics | SINGLE OUTPUT POWER SUPPLY, 45KHZ, LOW VAGE DIRECTIVE, NATURAL CONVECTION RoHS : Compliant |
| 1 | ||
| MSP-600-3.3 | Mean Well | AC-DC POWER SUPPLY, 3.3V, 120A, 5V, 0.3A, 100-264V, MEDICAL, PFC, MSP SERIES RoHS : Compliant |
| 1 | ||
| PSP-600-13.5 | Mean Well | POWER SUPPLY, AC-DC,13.5V,44.5A,115-264V IN, ENCLOSED, PNL MNT, PFC, PSP-600 SERIES RoHS : Compliant |
| 1 | ||
![]() Bisco Industries | A-MCSSP60010![]() | ASSMANN WSW components GmbH | RoHS : Compliant | 25 | ||
| LMSP-6-01 | Essentra Components | 10 | ||||
| ASP-60976-03-S | Samtec Inc | 4 | ||||
| MSP-6-01 | Essentra Components | 4 | ||||
| ASP60372-07-M | Samtec Inc | 3 | ||||
![]() Onlinecomponents.com | SP60 | Weller Hand Tools GmbH | Replacement Sponge |
| 8 | |
| SP60-NW | Cooper Crouse-Hinds | SP60 NW RoHS : Compliant |
| 0 | ||
![]() Rochester Electronics | BSP60,115![]() | NXP Semiconductors | Power Bipolar Transistor, 1A I(C), 45V V(BR)CEO, 1-Element, PNP, Silicon, Plastic/Epoxy, 4 Pin RoHS : Compliant |
| 1,500 | |
BSP60,115![]() | Nexperia | Power Bipolar Transistor, 1A I(C), 45V V(BR)CEO, 1-Element, PNP, Silicon, Plastic/Epoxy, 4 Pin RoHS : Compliant |
| 113,803 | ||
| BSP60H6327XTSA1 | Infineon Technologies AG | Small Signal Bipolar Transistor, 1A I(C), 45V V(BR)CEO, 1-Element, PNP, Silicon RoHS : Compliant |
| 31,687 | ||
| BSP60 | Infineon Technologies AG | Small Signal Bipolar Transistor, 1A I(C), 45V V(BR)CEO, 1-Element, PNP, Silicon RoHS : Compliant |
| 29,654 | ||
| BSP60E6327 | Infineon Technologies AG | Small Signal Bipolar Transistor RoHS : Compliant |
| 27,768 | ||
| SP600 | Harris Semiconductor | Half Bridge Based MOSFET Driver, CMOS, PDIP22 RoHS : Not Compliant |
| 2,800 | ||
![]() Sager | DSP60-24 | TDK-Lambda Corporation | DIN Rail Power Supplies 60W 24V 2.5A DIN Rail 115-230VAC RoHS : Compliant |
| 45 | |
TSP600-136![]() | Traco Power | DIN Rail Power Supplies | 31 | |||
| MSP-600-5 | Mean Well | Switching Power Supplies 600W 5V 120A Medical Power Supply RoHS : Compliant |
| 16 | ||
| MSP-600-36-TW | Mean Well | MSP-600-36-TW |
| 0 | ||
| 50KSP60-01-1-04N | Grayhill Inc | Rotary Switches | 0 | |||
| 50ESP60-01-2-03N | Grayhill Inc | Rotary Switches RoHS : Compliant | 0 | |||
| MSP-600-12-TW | Mean Well | MSP-600-12-TW |
| 0 | ||
| 50SP60-01-2-02N | Grayhill Inc | Rotary Switches ElectricalSwitch Rotary NotOver5Amp RoHS : Compliant |
| 0 | ||
| UTP28SP60GR | Panduit Corp | Ethernet Cables / Networking Cables Copper Patch Cord, Category 6 Performanc RoHS : Compliant |
| 0 | ||
| 50SP60-01-1-03N | Grayhill Inc | Rotary Switches ElectricalSwitch Rotary NotOver5Amp RoHS : Compliant |
| 0 | ||
| PSP-600-13.5 | Mean Well | Switching Power Supplies 600W 44.5A 13.5V PFC/Parallel Func RoHS : Compliant |
| 0 | ||
| UTPSP60MBLY | Panduit Corp | Ethernet Cables / Networking Cables Copper Patch Cord, Cat 6, Black UTP Cabl RoHS : Compliant | 0 | |||
| 25BSP60-B-1-06C | Grayhill Inc | Encoders ElectricalSwitch Rotary NotOver5Amp |
| 0 | ||
| 25BSP60-B-1-06F | Grayhill Inc | Encoders ElectricalSwitch Rotary NotOver5Amp |
| 0 | ||
| ASP600 | ABB Group | Fixed Terminal Blocks |
| 0 | ||
![]() TME | BLM21SP601SN1D | Murata Manufacturing Co Ltd | Ferrite: bead; Imp.@ 100MHz: 600Ω; SMD; 1.5A; 0805; R: 0.06Ω; BLM RoHS : Compliant |
| 27,992 | |
| BLM18SP601SH1D | Murata Manufacturing Co Ltd | Ferrite: bead; Imp.@ 100MHz: 600Ω; SMD; 1.5A; 0603; R: 140mΩ; BLM RoHS : Compliant |
| 10,677 | ||
| BLM21SP601SH1D | Murata Manufacturing Co Ltd | Ferrite: bead; Imp.@ 100MHz: 600Ω; SMD; 1.5A; 0805; R: 0.06Ω; BLM RoHS : Compliant |
| 9,993 | ||
| BLM18SP601SN1D | Murata Manufacturing Co Ltd | Ferrite: bead; Imp.@ 100MHz: 600Ω; SMD; 1A; 0603; R: 0.14Ω; BLM; 180mm RoHS : Compliant |
| 1,600 | ||
| PSP60-AUD2-103B1 | Bourns Inc | PSP60-AUD2-103B1 |
| 762 | ||
| PSP-600-48 | Mean Well | Power supply: switching; for building in,modular; 600W; 48VDC RoHS : Compliant |
| 343 | ||
| SP-6008 | Solder Peak | Tip; chisel; 0.8x0.6mm |
| 143 | ||
| SP-60-H | Solder Peak | Heating element; for soldering iron |
| 32 | ||
| SP-6012 | Solder Peak | Tip; chisel; 1.2mm; for soldering iron,for soldering station |
| 10 | ||
| PSP-600-15 | Mean Well | Power supply: switching; for building in,modular; 600W; 15VDC RoHS : Compliant |
| 4 | ||
| DSP60-12 | TDK-Lambda Corporation | Power supply: switching; for DIN rail; 54W; 12VDC; 4.5A; 90÷264VAC RoHS : Compliant |
| 3 | ||
| DSP60-15 | TDK-Lambda Corporation | Power supply: switching; for DIN rail; 60W; 15VDC; 4A; 90÷264VAC RoHS : Compliant |
| 2 | ||
| AMESP600-36SMNZ | Aimtec | Power supply: switching; for building in; 600W; 5VDC; 1A; -40÷70°C RoHS : Compliant |
| 1 | ||
BSP60,115![]() | Nexperia | Transistor: PNP; bipolar; Darlington; 45V; 1A; 1.25W; SC73,SOT223 RoHS : Compliant |
| 0 | ||
| TSP 600-148 | Traco Power | Power supply: switching; for DIN rail; 600W; 48VDC; 12.5A; OUT: 1 |
| 0 | ||
![]() ComSIT USA | RS6011SP6007 | AVAILABLE EU | 1,887 | |||
![]() ComSIT USA | BSP603S2L![]() | Infineon Technologies AG | OPTIMOS POWER-TRANSISTOR Power Field-Effect Transistor, 5.2A I(D), 55V, 0.04ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 1,860 | ||
![]() Interstate Connecting Components | LMSP-6-01 | Essentra Components | CB SptDual LckNatural3/8 in Spc CB Support Dual Lock Natural |
| 878 | |
| SP600-0.009-00-58 | The Bergquist Company | IDH# 2188798 |
| 258 | ||
![]() NexGen Digital | BLM21SP601BH1D | Murata Manufacturing Co Ltd | RoHS : Compliant | 6,220 | ||
![]() PEI Genesis | AFMSP-60 | Daniels Manufacturing Corporation (DMC) |
| 0 | ||
| SP604 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| SP604-1 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| SP601 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
![]() Richardson RFPD | 892SP601K | Ohmite Mfg Co | COMPOSITION RESISTOR | 0 | ||
| LL110-10SP-10SP-609-1-02 | Samtec Inc | Cable Assembly Coaxial 1.0mm to 1.0mm 1.70mm OD Co RoHS : Not Compliant | 0 | |||
![]() Chip 1 Exchange | SP601512M-02 | INSTOCK | 55 | |||
![]() Avnet Abacus | BLM21SP601SH1D | Murata Manufacturing Co Ltd | (Alt: BLM21SP601SH1D) RoHS : Compliant | 4,000 | ||
| BLM18SP601SN1D | Murata Manufacturing Co Ltd | (Alt: BLM18SP601SN1D) RoHS : Compliant | 4,000 | |||
| BLM21SP601SN1D | Murata Manufacturing Co Ltd | Ferrite Bead 0805 2012 Metric 600 ohm 23 A EMIFIL BLM21SP Series 006 ohm 25 (Alt: BLM21SP601SN1D) RoHS : Compliant | 4,000 | |||
| BLM18SP601SH1D | Murata Manufacturing Co Ltd | (Alt: BLM18SP601SH1D) RoHS : Compliant | 0 | |||
| BLM21SP601BH1D | Murata Manufacturing Co Ltd | (Alt: BLM21SP601BH1D) RoHS : Compliant | 0 | |||
| SF-0603SP600-2 | Bourns Inc | SMD Fuse Time Delay 6 A 32 VDC 0603 1608 Metric SF0603SP - Tape and Reel (Alt: SF-0603SP600-2) RoHS : Compliant | 0 | |||
| 50SP60-01-1-03N | Grayhill Inc | Switch Rotary SP3T 3 Flatted Shaft PC Pins 02A 220VAC 28VDC (Alt: 50SP60-01-1-03N) RoHS : Compliant | 0 | |||
| SF-1206SP600M-2 | Bourns Inc | - Tape and Reel (Alt: SF-1206SP600M-2) RoHS : Compliant | 0 | |||
| SF-0603SP600M-2 | Bourns Inc | - Tape and Reel (Alt: SF-0603SP600M-2) RoHS : Compliant | 0 | |||
| SF-0603SP600R-2 | Bourns Inc | - Tape and Reel (Alt: SF-0603SP600R-2) RoHS : Compliant | 0 | |||
| AMESP600-15S277NZ-P | Aimtec | AMESP600277NZ ACDC Converter (Alt: AMESP600-15S277NZ-P) RoHS : Compliant | 0 | |||
| AMESP600-24S277NZ-P | Aimtec | AMESP600277NZ ACDC Converter (Alt: AMESP600-24S277NZ-P) RoHS : Compliant | 0 | |||
| AMESP600-48S277NZ-P | Aimtec | AMESP600277NZ ACDC Converter (Alt: AMESP600-48S277NZ-P) RoHS : Compliant | 0 | |||
| AMESP600-12S277NZ-P | Aimtec | AMESP600277NZ ACDC Converter (Alt: AMESP600-12S277NZ-P) RoHS : Compliant | 0 | |||
| AMESP600-60S277NZ-P | Aimtec | AMESP600277NZ ACDC Converter (Alt: AMESP600-60S277NZ-P) RoHS : Compliant | 0 | |||
![]() Avnet Asia | BLM21SP601SH1D | Murata Manufacturing Co Ltd | (Alt: BLM21SP601SH1D) RoHS : Compliant | 0 | ||
| BLM18SP601SH1D | Murata Manufacturing Co Ltd | (Alt: BLM18SP601SH1D) RoHS : Compliant | 0 | |||
| BLM18SP601SN1D | Murata Manufacturing Co Ltd | (Alt: BLM18SP601SN1D) RoHS : Compliant |
| 0 | ||
| BLM21SP601SN1D | Murata Manufacturing Co Ltd | Ferrite Bead, 0805 [2012 Metric], 600 ohm, 2.3 A, EMIFIL BLM21SP Series, 0.06 ohm, ? 25% (Alt: BLM21SP601SN1D) RoHS : Compliant | 0 | |||
| BLM21SP601SZ1D | Murata Manufacturing Co Ltd | (Alt: BLM21SP601SZ1D) RoHS : Compliant |
| 0 | ||
![]() Braemac Americas-Symmetry | AMESP600-15S277NZ-P | Aimtec | RoHS : Compliant |
| 0 | |
| AMESP600-36S277NZ-PQ | Aimtec |
| 0 | |||
| AMESP600-60S277NZ-PQ | Aimtec |
| 0 | |||
| AMESP600-24S277NZ-P | Aimtec | RoHS : Compliant |
| 0 | ||
| 33-VSP6037L-MAR-01 | Calian | VSP6037L-MAR VeroStar Marine Full GNSS Precision Antenna +L-Band 1" Polemount |
| 0 | ||
| AMESP600-48S277NZ-PQ | Aimtec |
| 0 | |||
| AMESP600-48S277NZ-P | Aimtec | RoHS : Compliant |
| 0 | ||
| AMESP600-15S277NZ-PQ | Aimtec |
| 0 | |||
| AMESP600-24S277NZ-PQ | Aimtec |
| 0 | |||
| AMESP600-12S277NZ-P | Aimtec | RoHS : Compliant |
| 0 | ||
| AMESP600-60S277NZ-P | Aimtec | RoHS : Compliant |
| 0 | ||
| AMESP600-12S277NZ-PQ | Aimtec |
| 0 | |||
| AMESP600-36S277NZ-P | Aimtec | RoHS : Compliant |
| 0 | ||
| 33-VSP6037L-01 | Calian | VSP6037L VeroStar Full GNSS Bandwidth, HAS coverage, plus L - band VeroStar 1" Polemount |
| 0 | ||
| 33-VSP6037L-58 | Calian | VSP6037L VeroStar Full GNSS Bandwidth, HAS coverage, plus L - band VeroStar 5/8" Polemount |
| 0 | ||
![]() Component Electronics, Inc | ASP-60807-01-S | Samtec Inc | IN STOCK SHIP TODAY |
| 100 | |
| K1100AMSP60-32.000MHZ | Motorola Semiconductor Products | IN STOCK SHIP TODAY | 22 | |||
| SP6003 | Microchip Technology Inc | IN STOCK SHIP TODAY | 12 | |||
| ASP-60372-02-M | Samtec Inc | IN STOCK SHIP TODAY | 2 | |||
| VSP600 | VTech | IN STOCK SHIP TODAY | 2 | |||
| ASP-60372-08-M | Samtec Inc | IN STOCK SHIP TODAY | 2 | |||
| VSP601 | VTech | IN STOCK SHIP TODAY |
| 2 | ||
| SP-60C-24 | Tecate Group | IN STOCK SHIP TODAY | 1 | |||
![]() DB Roberts | DLMSP-6-01 | Essentra Components | CB SptDual LckNatural3/8 in Spc CB Support Dual Lock Natural | 0 | ||
| CSP6-01 | Essentra Components | SCREW RET PIN,NATURAL,#4 SCREW NYLON | 0 | |||
| MSP-6-01 | Essentra Components | CB SptMiniNatural3/8 in Spc CB Support Mini Natural | 0 | |||
| LMSP-6-01 | Essentra Components | CB SptDual LckNatural3/8 in Spc CB Support Dual Lock Natural | 0 | |||
![]() EBV Elektronik | TSSP6038TR | Vishay Intertechnologies | IR Sensor IC 38kHz e3 (Alt: TSSP6038TR) RoHS : Compliant | 0 | ||
| TSSP6056TT | Vishay Intertechnologies | IR SENSOR IC 56KHZe3 (Alt: TSSP6056TT) RoHS : Compliant | 0 | |||
| TSSP6038TT | Vishay Intertechnologies | Infrared Receiver Remote Control 38 kHz Top or Side View Surface Mount 25m 07 mWm (Alt: TSSP6038TT) RoHS : Compliant | 0 | |||
| BSP60H6327XTSA1 | Infineon Technologies AG | Trans Darlington PNP 45V 2A 4Pin SOT223 TR (Alt: SP000749082) RoHS : Compliant | 0 | |||
| BSP 60 H6327 TR | Infineon Technologies AG | Trans Darlington PNP 45V 2A 4Pin SOT223 TR (Alt: SP000749082) RoHS : Compliant | 0 | |||
![]() Maritex | PSP-600-48 | Mean Well | Power Supply; module; 600W; 48V; 12.5A; 88-264VAC; 124-370VDC RoHS : Compliant |
| 287 | |
| MSP-600-24 | Mean Well | Power Supply; module; medical; 648W; 24V; 27A; 85-264VAC; 120-370VDC RoHS : Compliant |
| 130 | ||
| PSP-600-27 | Mean Well | Power Supply; module; 599.4W; 27V; 22.2A; 88-264VAC; 124-370VDC RoHS : Compliant |
| 109 | ||
| PSP-600-13.5 | Mean Well | Power Supply; module; 600.75W; 13.5V; 44.5A; 88-264VAC; 124-370VDC RoHS : Compliant |
| 99 | ||
| MSP-600-48 | Mean Well | Power Supply; module; medical; 624W; 48V; 13A; 85-264VAC; 120-370VDC RoHS : Compliant |
| 79 | ||
| PSP-600-12 | Mean Well | Power Supply; module; 600W; 12V; 50A; 88-264VAC; 124-370VDC RoHS : Compliant |
| 35 | ||
| PSP-600-15 | Mean Well | Power Supply; module; 600W; 15V; 40A; 88-264VAC; 124-370VDC RoHS : Compliant |
| 27 | ||
| PSP-600-24 | Mean Well | Power Supply; module; 600W; 24V; 25A; 88-264VAC; 124-370VDC RoHS : Compliant |
| 5 | ||
| MSP-600-3.3 | Mean Well | Power Supply; module; medical; 396W; 3.3V; 120A; 85-264VAC; 120-370VDC RoHS : Compliant |
| 3 | ||
| MSP-600-7.5 | Mean Well | Power Supply; module; medical; 600W; 7.5V; 80A; 85-264VAC; 120-370VDC RoHS : Compliant |
| 2 | ||
![]() Master Electronics | A-MCSSP60010/Y![]() | ASSMANN WSW components GmbH | Cable Assembly Cat 6 SSTP 1m 26AWG RJ-45 to RJ-45 8 to 8 POS PL-PL RoHS : Compliant |
| 912 | |
A-MCSSP60010/B![]() | ASSMANN WSW components GmbH | Cable Assembly Patch Cable 1m 26AWG RJ-45 to RJ-45 8 to 8 POS PL-PL RoHS : Compliant |
| 342 | ||
| PSP-600-13.5 | Mean Well | AC/DC Power Supply - 1 Output - 13.5V@44.5A - 600W RoHS : Compliant |
| 17 | ||
| OVRHSP601202SC | Thomas & Betts | Surge Protective Device - OVRHSP Series - Facility-Wide Protection - 60kA - 120/240V - Configuration 2-Phase 3-Wire + Ground - Standard Monitoring - Stainless Steel Enclosure - Transient Filter RoHS : Compliant |
| 0 | ||
| OVRHSP602401P4 | Thomas & Betts | Surge Protective Device - OVRHSP Series - Facility-Wide Protection - 60kA - 240V - Configuration 1-Phase 2-Wire + Ground - Standard Monitoring - Stainless Steel Enclosure RoHS : Compliant |
| 0 | ||
| OVRHSP602403D4 | Thomas & Betts | Surge Protective Device - OVRHSP Series - Facility-Wide Protection - 60kA - 240V - Configuration 3-Phase Delta 3-Wire + Ground - Standard Monitoring - Stainless Steel Enclosure RoHS : Compliant |
| 0 | ||
| OVRHSP602403Y3 | Thomas & Betts | Surge Protective Device - OVRHSP Series - Facility-Wide Protection - 60kA - 240/415V - Configuration 3-Phase Wye 4-Wire + Ground - Standard Monitoring - Transient Filter RoHS : Compliant |
| 0 | ||
| OVRHSP602773Y3 | Thomas & Betts | Surge Protective Device - OVRHSP Series - Facility-Wide Protection - 60kA - 277/480V - Configuration 3-Phase Wye 4-Wire + Ground - Standard Monitoring - Transient Filter RoHS : Compliant |
| 0 | ||
| 50SP60-01-2-02N | Grayhill Inc | Switch Rotary DPDT 2 Flatted Shaft PC Pins 0.2A 220VAC 28VDC RoHS : Compliant |
| 0 | ||
| OVRHSP601203Y1 | Thomas & Betts | Surge Protective Device - OVRHSP Series - Facility-Wide Protection - 60kA - 120/208V - Configuration 3-Phase Wye 4-Wire + Ground - Advanced Monitoring RoHS : Compliant |
| 0 | ||
| OVRHSP602403Y1 | Thomas & Betts | Surge Protective Device - OVRHSP Series - Facility-Wide Protection - 60kA - 240/415V - Configuration 3-Phase Wye 4-Wire + Ground - Advanced Monitoring RoHS : Compliant |
| 0 | ||
| OVRHSP602773Y1 | Thomas & Betts | Surge Protective Device - OVRHSP Series - Facility-Wide Protection - 60kA - 277/480V - Configuration 3-Phase Wye 4-Wire + Ground - Advanced Monitoring RoHS : Compliant |
| 0 | ||
| QASP60S220ADL | Crouzet | Delay On Make Electronic Timer RoHS : Not Compliant |
| 0 | ||
| SP600-1-1/4 | Thomas & Betts | Steel City® - Single-Gang Flush Service Floor Box - Size Length 5-1/8 Inches Width 4-1/4 Inches Depth 4-1/4 Inches - Hub Size 1-1/4 Inches - Material Steel RoHS : Compliant |
| 0 | ||
| ASP600 | Thomas & Betts | Type ASP Aluminum Splice - Max 35kV - Wire Size 600 kcmil - Length 5-1/8 Inch - Tin Plated - Die Color Code Black. RoHS : Compliant |
| 0 | ||
![]() Neutron USA | DSP60-24 | TDK-Lambda Corporation | DIN Rail Power Supplies 60W 24V 2.5A DIN Rail 115-230VAC RoHS : Compliant |
| 50 | |
| PSP-600-24 | Mean Well | Power Supplies - Chassis Mount 600W 24V 25A PFC/Parallel Func RoHS : Compliant |
| 50 | ||
| MSP-600-15 | Mean Well | Switching Power Supplies 645W 15V 43A Medical Power Supply RoHS : Compliant |
| 17 | ||
| MSP-600-5 | Mean Well | Switching Power Supplies 600W 5V 120A Medical Power Supply RoHS : Compliant |
| 16 | ||
| 50SP60-01-2-02N | Grayhill Inc | Rotary Switches ElectricalSwitch Rotary NotOver5Amp RoHS : Compliant |
| 11 | ||
| QCSP60S110AL | Crouzet | Time Delay & Timing Relays 60S, ADJ, 110VAC SS TIMR DLY ON BRK |
| 11 | ||
| 50SP60-01-1-04N | Grayhill Inc | Rotary Switches 50SP60-01-1-04N RoHS : Compliant |
| 3 | ||
| QASP60S220ADL | Crouzet | DELAY ON MAKE ELECTRONIC TIMER, Delay T: 0.6-60 Sec, 220 VAC/DC, 1A |
| 0 | ||
| AWSP60-5 | Triad Magnetics | Switching Power Supplies 60W 5V 12A RoHS : Compliant |
| 0 | ||
| AWSP60-12 | Triad Magnetics | Switching Power Supply, 60W 12V 5A, Single Output, 85-264VAC Input, Enclosed, Adjustable Output RoHS : Compliant |
| 0 | ||
| TSP 600-148 | Traco Power | DIN Rail Power Supply 600W 48VDC 12.5A, Enclosed, Adj Vout, Input: 85-132VAC 187-264VAC |
| 0 | ||
| PSP-600-15 | Mean Well | Switching Power Supplies 600W 15V 40A ACTIVE PFC FUNCTION RoHS : Compliant |
| 0 | ||
| TSP 600-124 | Traco Power | DIN Rail Power Supply 600W 24VDC 25A, Enclosed, Adj Vout, Input: 85-132VAC 187-264VAC |
| 0 | ||
| PSP-600-48 | Mean Well | Switching Power Supplies 600W 48V 12.5A, PFC and Parallel, Enclosed, Adj Output, Input: 88 ~ 264 VAC, 124 ~ 370 VDC RoHS : Compliant |
| 0 | ||
| SP-600-15 | Mean Well | MEAN WELL PSP-600-15 Power Supply, AC-DC, Enclosed, 600W, 15V@40A, 88-264V In, PSP-600 Series |
| 0 | ||
![]() Pasternack Enterprises US | PE3C1491/SP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male Right Angle to SMA Male Low Loss Cable 60 Inch Length Using LMR-240-UF Coax with HeatShrink, LF Solder., Radio frequency assembly TNC male right angle to SMA male low loss cable 60 inch length using LMR-240-UF coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to SMA male low loss cable 60 inch length using LMR-240-UF coax with heatshrink, LF solder, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and SMA cable connection on the other. Our low loss right angle TNC to SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C1491/SP-60 can also be known as a low loss right angle TNC plug to SMA plug cable assembly and will be shipped same-day as it is purchased. TNC plug to SMA plug cable assembly PE3C1491/SP-60 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC right angle male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1491/SP-60 can also be used in the other direction and will be SMA male to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to SMA male low loss cable 60 inch length using LMR-240-UF coax with heatshrink, LF solder. |
| 2,146 | |
| PE3W02628/SP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male RA to SMA Male RA Low Loss Cable 60 Inch Length Using LMR-240-UF Coax with Times Microwave Components with 270 Deg. Clock., Pasternack’s PE3W02628/SP-60 low loss right angle SMA male to right angle SMA male RF cable assembly using LMR-240-UF coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle SMA cable connection on the other. Our SMA to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3W02628/SP-60 can also be known as a low loss right angle SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W02628/SP-60 RF cable has a tpe jacket of 0.24-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our right angle SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. This PE3W02628/SP-60 SMA plug to SMA plug cable assembly is built with LMR-240-UF, which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 60-inch-long low loss RF cable are available on our downloadable PDF datasheet. This low loss SMA right angle plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 1,425 | ||
| PE3W01841/SP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMB, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male Right Angle to SMB Plug Right Angle Low Loss Cable 60 Inch Length Using PE-P195 Coax with 180 Deg. Clock., Radio frequency assembly SMA male right angle to SMB plug right angle low loss cable 60 inch length using PE-P195 coax with 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMB plug right angle low loss cable 60 inch length using PE-P195 coax with 180 deg. clock, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and right angle SMB cable connection on the other. Our low loss right angle SMA to right angle SMB cable assemblies have a male gender on end 1 and plug on end 2. PE3W01841/SP-60 can also be known as a low loss right angle SMA plug to right angle SMB male cable assembly and will be shipped same-day as it is purchased. SMA plug to SMB male cable assembly PE3W01841/SP-60 is built with PE-P195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMB cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 4 GHz maximum frequency SMA right angle male to SMB right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01841/SP-60 can also be used in the other direction and will be right angle SMB plug to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to SMB right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMB plug right angle low loss cable 60 inch length using PE-P195 coax with 180 deg. clock. |
| 1,225 | ||
| PE3W01950/SP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. BNC Male to BNC Male Low Loss Cable 60 Inch Length Using LMR-240-DB Coax with HeatShrink, LF Solder., Radio frequency assembly BNC male to BNC male low loss cable 60 inch length using LMR-240-DB coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 60 inch length using LMR-240-DB coax with heatshrink, LF solder, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our low loss BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3W01950/SP-60 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3W01950/SP-60 is built with LMR-240-DB which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male low loss cable 60 inch length using LMR-240-DB coax with heatshrink, LF solder. |
| 1,076 | ||
| PE3C2252LF/SP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male Right Angle to SMA Male Right Angle Low Loss Cable 60 Inch Length Using LMR-240 Coax with 270 Deg. Clock, LF Solder., Radio frequency assembly TNC male right angle to SMA male right angle low loss cable 60 inch length using LMR-240 coax with 270 deg. clock, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to SMA male right angle low loss cable 60 inch length using LMR-240 coax with 270 deg. clock, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle TNC to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C2252LF/SP-60 can also be known as a low loss right angle TNC plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. TNC plug to SMA plug cable assembly PE3C2252LF/SP-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2252LF/SP-60 can also be used in the other direction and will be right angle SMA male to right angle TNC male cable assembly if the opposite connectivity is required. Low loss TNC right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to SMA male right angle low loss cable 60 inch length using LMR-240 coax with 270 deg. clock, LF solder. |
| 1,015 | ||
| PE3C1732/SP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-240-UF, RF Cable Type: LMR-240-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male Right Angle to SMA Male Right Angle Low Loss Cable 60 Inch Length Using LMR-240-UF Coax with HeatShrink and 270 Deg. Clock., Radio frequency assembly SMA male right angle to SMA male right angle low loss cable 60 inch length using LMR-240-UF coax with heatshrink and 270 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA male right angle low loss cable 60 inch length using LMR-240-UF coax with heatshrink and 270 deg. clock, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our low loss right angle SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C1732/SP-60 can also be known as a low loss right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C1732/SP-60 is built with LMR-240-UF which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male right angle low loss cable 60 inch length using LMR-240-UF coax with heatshrink and 270 deg. clock. |
| 507 | ||
| PE33342/SP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Female Bulkhead to TNC Male Right Angle Cable 60 Inch Length Using RG142 Coax., Radio frequency assembly TNC female bulkhead to TNC male right angle cable 60 inch length using RG142 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC female bulkhead to TNC male right angle cable 60 inch length using RG142 coax, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC bulkhead cable connection on one end and right angle TNC cable connection on the other. Our TNC to right angle TNC cable assemblies have a female gender on end 1 and male on end 2. This TNC to TNC cable is a female to male coax assembly, PE33342/SP-60, can also be known as a TNC jack to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC jack to TNC plug cable assembly PE33342/SP-60 is built with RG142 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency TNC female bulkhead to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE33342/SP-60 can also be used in the other direction and will be right angle TNC male to TNC female bulkhead cable assembly if the opposite connectivity is required. TNC jack bulkhead to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC female bulkhead to TNC male right angle cable 60 inch length using RG142 coax. |
| 298 | ||
| PE3C1064/SP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 7/16 DIN, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. 7/16 DIN Male RA to 7/16 DIN Male RA Low Loss Cable 60 Inch Length Using LMR-240 Coax with HeatShrink and 180 Deg. Clock, LF Solder., Radio frequency assembly 7/16 DIN male RA to 7/16 DIN male RA low loss cable 60 inch length using LMR-240 coax with heatshrink and 180 deg. clock, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 7/16 DIN male RA to 7/16 DIN male RA low loss cable 60 inch length using LMR-240 coax with heatshrink and 180 deg. clock, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to 7/16 DIN cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle 7/16 DIN cable connection on one end and right angle 7/16 DIN cable connection on the other. Our low loss right angle 7/16 DIN to right angle 7/16 DIN cable assemblies have a male gender on end 1 and male on end 2. PE3C1064/SP-60 can also be known as a low loss right angle 7/16 DIN plug to right angle 7/16 DIN plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to 7/16 DIN plug cable assembly PE3C1064/SP-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with right angle 7/16 DIN to right angle 7/16 DIN cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency 7/16 DIN right angle male to 7/16 DIN right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss 7/16 DIN right angle plug to 7/16 DIN right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to 7/16 DIN cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male RA to 7/16 DIN male RA low loss cable 60 inch length using LMR-240 coax with heatshrink and 180 deg. clock, LF solder. |
| 140 | ||
| PE3C6640/SP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 2.4mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P103, RF Cable Type: PE-P103, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. 2.4mm Male to 2.4mm Male Cable 60 Inch Length Using PE-P103 Coax., Radio frequency assembly 2.4mm male to 2.4mm male cable 60 inch length using PE-P103 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 2.4mm male to 2.4mm male cable 60 inch length using PE-P103 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.4mm to 2.4mm cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with 2.4mm cable connection on one end and 2.4mm cable connection on the other. Our 2.4mm to 2.4mm cable assemblies have a male gender on end 1 and male on end 2. PE3C6640/SP-60 can also be known as a 2.4mm plug to 2.4mm plug cable assembly and will be shipped same-day as it is purchased. 2.4mm plug to 2.4mm plug cable assembly PE3C6640/SP-60 is built with PE-P103 which is a flexible coax type. The Pasternack flexible 2.4mm cable assembly is manufactured with 2.4mm to 2.4mm cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 50 GHz maximum frequency 2.4mm male to 2.4mm male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. 2.4mm plug to 2.4mm plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.4mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 2.4mm cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.4mm male to 2.4mm male cable 60 inch length using PE-P103 coax. |
| 20 | ||
| PE3W02803/SP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male Right Angle to TNC Male Right Angle Low Loss Cable 60 Inch Length Using LMR-400-UF Coax with 180 Deg. Clock., Radio frequency assembly TNC male right angle to TNC male right angle low loss cable 60 inch length using LMR-400-UF coax with 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to TNC male right angle low loss cable 60 inch length using LMR-400-UF coax with 180 deg. clock, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle TNC to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W02803/SP-60 can also be known as a low loss right angle TNC plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W02803/SP-60 is built with LMR-400-UF which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to TNC male right angle low loss cable 60 inch length using LMR-400-UF coax with 180 deg. clock. |
| 8 | ||
| PE3W01180/SP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MMCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-047SR, RF Cable Type: PE-047SR, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. MMCX Plug Right Angle to MMCX Plug Right Angle Cable 60 Inch Length Using PE-047SR Coax with 180 Deg. Clock., Radio frequency assembly MMCX plug right angle to MMCX plug right angle cable 60 inch length using PE-047SR coax with 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MMCX plug right angle to MMCX plug right angle cable 60 inch length using PE-047SR coax with 180 deg. clock, MMCX cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MMCX to MMCX cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle MMCX cable connection on one end and right angle MMCX cable connection on the other. Our right angle MMCX to right angle MMCX cable assemblies have a plug gender on end 1 and plug on end 2. PE3W01180/SP-60 can also be known as a right angle MMCX male to right angle MMCX male cable assembly and will be shipped same-day as it is purchased. MMCX male to MMCX male cable assembly PE3W01180/SP-60 is built with PE-047SR which is a semi-rigid coax type. The Pasternack semi-rigid MMCX cable assembly is manufactured with right angle MMCX to right angle MMCX cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency MMCX right angle plug to MMCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. MMCX right angle male to MMCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MMCX to MMCX cable assembly for quick shipment worldwide. Variations of MMCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this MMCX plug right angle to MMCX plug right angle cable 60 inch length using PE-047SR coax with 180 deg. clock. |
| 1 | ||
| PE3C0689/SP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male to N Male Low Loss Cable 60 Inch Length Using PE-P142LL Coax., Radio frequency assembly SMA male to N male low loss cable 60 inch length using PE-P142LL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to N male low loss cable 60 inch length using PE-P142LL coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and N type cable connection on the other. Our low loss SMA to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C0689/SP-60 can also be known as a low loss SMA plug to N type plug cable assembly and will be shipped same-day as it is purchased. SMA plug to type N plug cable assembly PE3C0689/SP-60 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0689/SP-60 can also be used in the other direction and will be N type male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N male low loss cable 60 inch length using PE-P142LL coax. |
| 0 | ||
| PE3C1905/SP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male Right Angle to SMA Male Right Angle Low Loss Cable 60 Inch Length Using LMR-200 Coax with HeatShrink and 180 Deg. Clock., Radio frequency assembly SMA male right angle to SMA male right angle low loss cable 60 inch length using LMR-200 coax with heatshrink and 180 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to SMA male right angle low loss cable 60 inch length using LMR-200 coax with heatshrink and 180 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle SMA cable connection on one end and a right angle SMA cable connection on the other. Our low loss right angle SMA to right angle SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C1905/SP-60 can also be known as a low loss right angle SMA plug to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C1905/SP-60 RF cable has a PE jacket of 0.195-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 83% and a minimum RF shielding of 90 dB. Our right angle SMA male to right angle SMA male cable has a maximum VSWR of 1.4:1. SMA plug to SMA plug cable assembly PE3C1905/SP-60 is built with LMR-200 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with gold plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss SMA right angle plug to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W01768/SP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: MMCX, Connector 2 Gender: Plug, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-C100-LSZH, RF Cable Type: PE-C100-LSZH, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Male Right Angle to MMCX Plug Right Angle Low Loss Cable 60 Inch Length Using PE-C100-LSZH Coax with 270 Deg. Clock., Radio frequency assembly SMA male right angle to MMCX plug right angle low loss cable 60 inch length using PE-C100-LSZH coax with 270 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male right angle to MMCX plug right angle low loss cable 60 inch length using PE-C100-LSZH coax with 270 deg. clock, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to MMCX cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle SMA cable connection on one end and right angle MMCX cable connection on the other. Our low loss right angle SMA to right angle MMCX cable assemblies have a male gender on end 1 and plug on end 2. PE3W01768/SP-60 can also be known as a low loss right angle SMA plug to right angle MMCX male cable assembly and will be shipped same-day as it is purchased. SMA plug to MMCX male cable assembly PE3W01768/SP-60 is built with PE-C100-LSZH which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to right angle MMCX cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5 GHz maximum frequency SMA right angle male to MMCX right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W01768/SP-60 can also be used in the other direction and will be right angle MMCX plug to right angle SMA male cable assembly if the opposite connectivity is required. Low loss SMA right angle plug to MMCX right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to MMCX cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to MMCX plug right angle low loss cable 60 inch length using PE-C100-LSZH coax with 270 deg. clock. |
| 0 | ||
| PE3W03732/SP-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male Right Angle to TNC Male Right Angle Low Loss Cable 60 Inch Length Using LMR-400 Coax with HeatShrink and 270 Deg. Clock., Radio frequency assembly N male right angle to TNC male right angle low loss cable 60 inch length using LMR-400 coax with heatshrink and 270 deg. clock from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to TNC male right angle low loss cable 60 inch length using LMR-400 coax with heatshrink and 270 deg. clock, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle type N to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W03732/SP-60 can also be known as a low loss right angle type N plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3W03732/SP-60 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle N type to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency N type right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W03732/SP-60 can also be used in the other direction and will be right angle TNC male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to TNC male right angle low loss cable 60 inch length using LMR-400 coax with heatshrink and 270 deg. clock. |
| 0 | ||
![]() Vyrian | TSP600-124 | Traco Electronic Ag | AC-DC Regulated Power Supply Module, 1 Output, 600W | 17,797 | ||
| PSP-600-48 | Mean Well Enterprises | AC-DC Power Factor Correction Module | 16,514 | |||
| BSP603S2LHUMA1 | Infineon Technologies AG | Power Field-Effect Transistor, 5.2A I(D), 55V, 0.04ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 11,389 | |||
| SP6003-06UTG-1 | Littelfuse Inc | Data Line Filter, 12 Pin(s), Plastic RoHS : Compliant | 10,508 | |||
| TSP60C18N | Texas Instruments | MASK ROM, 16KX16, CMOS, PDIP16 RoHS : Not Compliant | 9,578 | |||
| SP6001-06UTG-1 | Littelfuse Inc | Data Line Filter, 6 Function(s), 2.5V, 0.001A, 12 Pin(s), Plastic RoHS : Compliant | 9,185 | |||
| BSP603S2LNT | Infineon Technologies AG | Power Field-Effect Transistor, 5.2A I(D), 55V, 0.04ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 7,594 | |||
| KTD-INSP6000B/4G | Kingston Technology Company | 6,901 | ||||
| TSP60C81N | Texas Instruments | MASK ROM, 64KX16, CMOS, PDIP28 RoHS : Not Compliant | 6,514 | |||
| KTD-INSP600A/512 | Kingston Technology Company | 5,377 | ||||
| KTD-INSP6000B/256 | Kingston Technology Company | 4,904 | ||||
| KTD-INSP6000/512 | Kingston Technology Company | 3,455 | ||||
| KTD-INSP6000A/256 | Kingston Technology Company | 3,410 | ||||
| KTD-INSP6000A/512 | Kingston Technology Company | 3,402 | ||||
| KTD-INSP6000C/2G | Kingston Technology Company | 2,397 | ||||
![]() Win Source Electronics | BLM21SP601SH1D | Murata Manufacturing Co Ltd | FERRITE BEAD 600 OHM 0805 1LN RoHS : Compliant |
| 204,000 | |
| BLM21SP601SN1D | Murata Manufacturing Co Ltd | FERRITE BEAD 600 OHM 0805 1LN RoHS : Compliant |
| 80,000 | ||
BSP603S2L![]() | Infineon Technologies AG | MOSFET N-CH 55V 5.2A SOT-223 RoHS : Compliant |
| 31,447 | ||
| FHS 40-P/SP600 | LEM Holdings SSA | SENSOR CURRENT HALL 100A AC/DC / Current Sensor 100A 1 Channel Hall Effect, Open Loop Bidirectional 8-SOIC (0.154", 3.90mm Width) |
| 4,164 | ||
| BSP603S2LHUMA1 | Infineon Technologies AG | MOSFET N-CH 55V 5.2A SOT223-4 / N-Channel 55 V 5.2A (Ta) 1.8W (Ta) Surface Mount PG-SOT223-4 RoHS : Compliant |
| 3,845 | ||
SP601![]() | Intersil Corporation | Half Bridge 500VDC Driver RoHS : Not Compliant |
| 1,200 | ||
| SP6013AS8RG | Sync Power Corp | Synchronous Rectifier Driver |
| 1,100 | ||
| WCD-9385-0-FOWPSP60-TR-00-0 | Qualcomm |
| 258 |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |