 |
поискавой системы для электроныых деталей |
|
|
поискавой системы для электроныых деталей |
|
S48FAJ-R дистрибьютор |
| дистрибьютор | номер детали | производитель | подробное описание детали | Price | Qty. BuyNow | |
 DigiKey | LSA28-S2S2-S48 | ConductRF | COAX CABLE SMA TO SMA 4' |
| 1,000 | |
| LSA28-S11M-S48 | ConductRF | COAX CBL MMCX TO SMA 4' |
| 998 | ||
| SUS75C50S48B-19.200M | Suntsu Electronics Inc | XTAL OSC TCXO 19.200MHZ CMOS |
| 50 | ||
| SUS53C50S48B-20.000M | Suntsu Electronics Inc | XTAL OSC TCXO 20.000MHZ SNWV |
| 46 | ||
S48 | NKK Switches | SWITCH TOGGLE 4PDT 15A 125V RoHS : Compliant |
| 17 | ||
| QS48188R2YLB | ABC Taiwan Electronics Corp | Shielded Molded SMD Power Induct |
| 10 | ||
| QS4828100MLB | ABC Taiwan Electronics Corp | Shielded Molded SMD Power Induct RoHS : Compliant |
| 10 | ||
| QS4828470MLB | ABC Taiwan Electronics Corp | Shielded Molded SMD Power Induct RoHS : Compliant |
| 10 | ||
| 088166LS-48.00-S | Helix Linear Technologies | Acme Screw |
| 10 | ||
| 050400LS-48.00-S | Helix Linear Technologies | Acme Screw |
| 10 | ||
| 055787RS-48.00-T | Helix Linear Technologies | Lead Screw |
| 10 | ||
| 055M30LS-48.00-T | Helix Linear Technologies | Lead Screw |
| 10 | ||
| S48 | Swanstrom Tools USA | CUTTER TAPERED FLUSH SMALL |
| 6 | ||
| TPS4810Q1EVM | Texas Instruments | EVAL BOARD FOR TPS4810-Q1 |
| 3 | ||
| CCR550PS48 | XP Power | AC/DC CONVERTER 48V 230W |
| 1 | ||
 Avnet Americas | FBMJ3216HS480NT | TAIYO YUDEN | - Tape and Reel (Alt: FBMJ3216HS480NT) RoHS : Compliant |
| 74,000 | |
| FBMJ3216HS480NTV | TAIYO YUDEN | - Tape and Reel (Alt: FBMJ3216HS480NTV) RoHS : Compliant |
| 54,000 | ||
| SIT8008BI-13-YYS-48.000000E | SiTime Corporation | MEMS Oscillator, 48 MHz, PQFN, 2.5mm x 2mm, 50 ppm, 1.62V to 3.63V, SiT8008B Series - Tape and Reel (Alt: SIT8008BI-13-YYS-48.000000E) RoHS : Compliant |
| 6,000 | ||
| LTS-4802BJR-H1 | Lite-On Semiconductor Corporation | - Rail/Tube (Alt: LTS-4802BJR-H1) RoHS : Compliant |
| 5,807 | ||
| VS-48CTQ060S-M3 | Vishay Intertechnologies | Schottky Rectifier, 60 V, 40 A, Dual Common Cathode, TO-263AB, 3 Pins, 830 mV - Rail/Tube (Alt: VS-48CTQ060S-M3) RoHS : Compliant |
| 4,748 | ||
| SQS482EN-T1_BE3 | Vishay Intertechnologies | Power MOSFET, N Channel, 30 V, 16 A, 8.5 Milliohms, PowerPAK 1212, 8 Pins, Surface Mount - Tape and Reel (Alt: SQS482EN-T1_BE3) RoHS : Compliant |
| 3,000 | ||
PTVS48VS1UTR,115 | Nexperia | - Tape and Reel (Alt: PTVS48VS1UTR,115) RoHS : Compliant | 3,000 | |||
| TTMS-4.8-2-IN | TE Connectivity | - Bulk (Alt: TTMS-4.8-2-IN) RoHS : Not Compliant | 2,937 | |||
| MTSW-102-09-L-S-480 | Samtec Inc | Pin Header, Board-to-Board, 2.54 mm, 1 Rows, 2 Contacts, Through Hole, MTSW Series - Bulk (Alt: MTSW-102-09-L-S-480) RoHS : Compliant |
| 583 | ||
| SLB125S48C | Advanced Energy Industries Inc | AC/DC Power Supply Single-OUT 48V 1.8A (Convection) 85W (Convection) Chassis Mount - Bulk (Alt: SLB125S48C) RoHS : Compliant |
| 40 | ||
| LTS-4801JR | Lite-On Semiconductor Corporation | - Rail/Tube (Alt: LTS-4801JR) RoHS : Not Compliant |
| 20 | ||
| AMEOFL10-9S480LPZ | Aimtec | AC/DC Open Frame Power Supply (PSU), ITE, Industrial & Household, 1 Output, 10 W, 85V to 528V - Trays (Alt: AMEOFL10-9S480LPZ) RoHS : Compliant |
| 10 | ||
| AMEOFL10-5S480LPZ | Aimtec | - Trays (Alt: AMEOFL10-5S480LPZ) RoHS : Compliant |
| 10 | ||
| AMEOFL10-24S480LPZ | Aimtec | - Trays (Alt: AMEOFL10-24S480LPZ) RoHS : Compliant |
| 10 | ||
| AMEOFL10-12S480LPZ | Aimtec | - Trays (Alt: AMEOFL10-12S480LPZ) RoHS : Compliant |
| 10 | ||
 Newark | QT216S-48.000MAHQ-T | TXC Corporation | XTAL, 48MHZ, 10PF, SMD, 2MM X 1.6MM; RoHS : Compliant |
| 500 | |
| QT216S-48.000MAHQ-T | TXC Corporation | XTAL, 48MHZ, 10PF, SMD, 2MM X 1.6MM; RoHS : Compliant |
| 500 | ||
| DW-06-12-S-S-480 | Samtec Inc | CONN STACK BRD, 2.54MM, 6POS, HDR; RoHS : Compliant |
| 279 | ||
| ZW-10-10-G-S-480-236 | Samtec Inc | CONN STACK BRD, 2.54MM, 10POS, HDR; RoHS : Compliant |
| 242 | ||
DTE6024S48 | XP Power | DC-DC CONVERTER, 48V, 1.25A; RoHS : Compliant |
| 37 | ||
| S48 | NKK Switches | SWITCH, TOGGLE, 4PDT, 20A, 250VAC; Switch Operation:(On)-Off-(On); Contact Configuration:4PDT; Illumination:Non Illuminated; Product Range:S Series; Switch Mounting:Panel Mount; Contact Current Max:20A; Contact Voltage AC Nom:250V RoHS Compliant: Yes RoHS : Compliant |
| 27 | ||
| FOC-IPMF2S-S48N | L-com Inc | CONN FIBER OPT, MPO, SINGLEMODE; RoHS : Compliant |
| 15 | ||
| ECL10US48-E | XP Power | AC/DC PCB Mount Power Supply, Ultra Comp; RoHS : Compliant |
| 6 | ||
| CCR200PS48 | XP Power | POWER SUPPLY, AC-DC, 48V, 2.29A; RoHS : Compliant |
| 4 | ||
| CCH600PS48 | XP Power | POWER SUPPLY, AC-DC, 48V, 12.5A; RoHS : Compliant |
| 4 | ||
| 1250A-1S-480 | Bourns Inc | SURGE PROTECTOR, 1P, TYPE 2 & 4, 50KA; RoHS : Compliant |
| 4 | ||
| S25GI-RS485-Q | Banner Engineering Corp | RS-485 GALVANIC ISOLATOR , VOLTAGE- 10-30 V DC, IP65-IP67-IP68 , INPUT- RS-485, OUTPUT- RS-485 , FEMALE-MALE 5-PIN M12 QD RoHS : Not Compliant |
| 3 | ||
| CCR550PS48 | XP Power | POWER SUPPLY, AC-DC, 48V, 4.79A; RoHS : Compliant |
| 2 | ||
| DRS-480-36 | Mean Well | PSU AC/DC DIN ITE & IND 1 OUTPUT; RoHS : Compliant |
| 2 | ||
| CCR550PS48 | XP Power | POWER SUPPLY, AC-DC, 48V, 4.79A; RoHS : Compliant |
| 1 | ||
 RS | DTE2024S48-D | XP Power | DC-DC CONVERTER 20W 4:1 DIN RAIL MOUNT RoHS : Compliant |
| 39 | |
| SS-4856-40 (SS485640) | Isostatic Industries Inc | SLEEVE BEARING, SS-4856-40 1.504 X 1.754 X 2-1/2IN, POWDERED METAL BRONZE |
| 32 | ||
| 1250A-1S-480 | Bourns Inc | AC SPD, 1W-G,550VAC RoHS : Compliant |
| 20 | ||
| SS-4856-12 (SS485612) | Isostatic Industries Inc | SLEEVE BEARING, SS-4856-12 1.504 X 1.754 X 3/4IN, POWDERED METAL BRONZE |
| 14 | ||
| 3032635 (FBS 4-8 GY) | Phoenix Contact | PLUG-IN BRIDGE PITCH: 8.2 MM, NUMBER OF POSITIONS: 4 COLOR: GRAY, FBS 4-8 GY |
| 9 | ||
| S8VK-S48024 (S8VKS48024) | OMRON Industrial Automation | 480W 24VDC 20A PUSH IN TERMINALS |
| 8 | ||
| 2744429 (PSM-ME-RS485/RS485-P) | Phoenix Contact | REPEATER, REPEATER, RAIL, SERIAL, 24 VAC/VDC +/- 20%, CUL, UL LISTED |
| 6 | ||
| EPS-45S-48 | Mean Well | POWER SUPPLY, AC-DC, OPEN FRAME, 49.4W, 48V@0.94A, 80-264V IN, CLASS II RoHS : Compliant |
| 5 | ||
| DRC60US48 | XP Power | POWER SUPPLY, AC-DC, DIN RAIL, 60W, 48V, 1.25A, 85-264V IN, DRC60 SERIES RoHS : Compliant |
| 4 | ||
| BI5U-Q08-AP6X2-0.6-RS4/S480-S481 (1608924) | TURCK Inc | PROXIMITY SENSOR, UPROX, 5MM SENSING DISTANCENO, PNP, FLUSH MOUNT |
| 4 | ||
| BCC006A (BKS-S 48-15-CP-05) | Balluff Inc | CONNECTOR, FEMALE M8, PUR SHIELDED, 5.00 M |
| 3 | ||
| DRS-480-36 | Mean Well | POWER SUPPLY, AC-DC, ENCLOSED, 480W SECURITY POWER, 36V, DIN, DRS-480 SERIES RoHS : Compliant |
| 1 | ||
| S8VS-48024A (S8VS48024A) | OMRON Industrial Automation | AC-DC POWER SUPPLY, 24V, 20A, 85-264V, ENCLOSED, PANEL, 480W, S8VS SERIES |
| 1 | ||
| 2905008 (QUINT-PS/48DC/48DC/5) | Phoenix Contact | DC/DC CONVERTERS; QUINT; 48VDC/48VDC; 5A; QUINT-PS/48DC/48DC/5 |
| 1 | ||
| S48 | NKK Switches | SWITCH, TOGGLE,4PDT,(ON)-OFF-(ON),NON-ILLUM,17.50MM ACTUATOR,15A,125VAC, SOLDER RoHS : Compliant |
| 0 | ||
 Microchip Technology Inc | ATRS485-XPRO | Microchip Technology Inc | RS-485 Xplained Pro, Projected EOL: |
| 16 | |
| EPS48 | Microchip Technology Inc | Uni-Directional TVS _ A-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| TFS48B | Microchip Technology Inc | TFS48B, Projected EOL: 2050-07-31 - Contact for Pricing RoHS : Compliant | 0 | |||
| LDTS48 | Microchip Technology Inc | Uni-Directional TVS _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| TFS482 | Microchip Technology Inc | TFS482, Projected EOL: 2050-07-31 - Contact for Pricing RoHS : Compliant | 0 | |||
| TFS480C | Microchip Technology Inc | TFS480C, Projected EOL: 2050-07-31 - Contact for Pricing | 0 | |||
| TFS482E | Microchip Technology Inc | TFS482E, Projected EOL: 2050-07-31 - Contact for Pricing | 0 | |||
| LDTS48A | Microchip Technology Inc | Uni-Directional TVS _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| TFS480D | Microchip Technology Inc | TFS480D, Projected EOL: 2050-07-31 - Contact for Pricing RoHS : Compliant | 0 | |||
| TFS482D | Microchip Technology Inc | TFS482D, Projected EOL: 2050-07-31 - Contact for Pricing | 0 | |||
| TFS482B | Microchip Technology Inc | TFS482B, Projected EOL: 2050-07-31 - Contact for Pricing | 0 | |||
| EPS48SM | Microchip Technology Inc | Uni-Directional TVS _ A-Body Sq. Melf, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| EPS48HR2 | Microchip Technology Inc | Uni-Directional TVS _ A-Body, Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| SM2S-484FG-MSSOC | Microchip Technology Inc | G4 MDL 484 PIN - FSM2S484FGMSSOC, Projected EOL: |
| 0 | ||
 Rochester Electronics | PTVS48VP1UP,115 | NXP Semiconductors | Trans Voltage Suppressor Diode, 600W, 48V V(RWM), Unidirectional, 1 Element, Silicon RoHS : Compliant |
| 86,165 | |
PTVS48VP1UP,115 | Nexperia | Trans Voltage Suppressor Diode, 600W, 48V V(RWM), Unidirectional, 1 Element, Silicon RoHS : Compliant |
| 102,370 | ||
NTMS4816NR2G | onsemi | Single N-Channel Power MOSFET 30V, 11A, 10mΩ RoHS : Compliant |
| 176,522 | ||
NTMFS4837NHT1G | onsemi | Power Field-Effect Transistor, 10.2A I(D), 30V, 0.008ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant |
| 17,115 | ||
NTMFS4899NFT1G | onsemi | Single N-Channel Power MOSFET 30V, 75A, 5mΩ RoHS : Compliant |
| 408 | ||
| NVTFS4823NTAG | onsemi | Power MOSFET 30V, 30A, 10.5 mOhm, Single N-Channel, u8FL, Logic Level. RoHS : Compliant |
| 0 | ||
| NTMFS4836NT1G | onsemi | Power MOSFET 30V 90A 4 mOhm Single N-Channel SO-8FL RoHS : Compliant |
| 115,775 | ||
| CY8C4245PVS-482 | Infineon Technologies AG | PSoC 4: PSoC 4200 RoHS : Compliant | 2,250 | |||
| MAX6394US480D3+ | Analog Devices Inc | High-Accuracy µP Reset Circuit RoHS : Compliant | 458 | |||
| DS4834T-G00+ | Analog Devices Inc | Optical Microcontroller | 102 | |||
| MAX6394US480D3/V+T | Analog Devices Inc | Supervisory Circuit 4.8V SOT-23-4 T/R RoHS : Compliant |
| 22,500 | ||
DS485TM | Texas Instruments | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8 RoHS : Not Compliant |
| 2,746 | ||
MAX6315US48D3-T | Maxim Integrated Products | Voltage Supervisor/Reset IC, Adjustable, 1 Channel, +4.8V, CMOS, PDSO4 RoHS : Not Compliant |
| 5,000 | ||
| DS481M | National Semiconductor Corporation | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8 RoHS : Not Compliant |
| 1,425 | ||
| DS481TN | National Semiconductor Corporation | Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDIP8 RoHS : Not Compliant |
| 6,320 | ||
 Sager | EFX1S48K564C092LH | Eaton Bussmann | CAP EFX1S 480VAC 0.56UF 2LEADS |
| 0 | |
| EFX1S48K823C012LH | Eaton Bussmann | CAP EFX1S 480VAC 0.082UF 2LEADS |
| 0 | ||
| TW-04-06-F-S-488-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-05-04-L-S-487-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-09-04-T-S-487-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-12-04-T-S-487-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| RPA50S-4805SW/P | RECOM Power GmbH | Isolated DC/DC Converters - Through Hole 50W 18-75Vin 5Vout 10A RoHS : Compliant |
| 0 | ||
RS-4809D/H2 | RECOM Power GmbH | Isolated DC/DC Converters - Through Hole 2W DC/DC 2kV REG 2:1 36-72Vin +/-9Vout RoHS : Compliant |
| 0 | ||
| RS-4812SZ/H3 | RECOM Power GmbH | Isolated DC/DC Converters - Through Hole 2W DC/DC 3kV REG 4:1 18-72Vin 12Vout RoHS : Compliant |
| 0 | ||
| RS-483.3DZ | RECOM Power GmbH | Isolated DC/DC Converters - Through Hole 2W DC/DC 1kV REG 4:1 18-72Vin +/-3.3Vout RoHS : Compliant |
| 0 | ||
| RS-483.3S/H2 | RECOM Power GmbH | Isolated DC/DC Converters - Through Hole 2W DC/DC 2kV REG 2:1 36-72Vin 3.3Vout RoHS : Compliant |
| 0 | ||
| TTMS-4.8-6 | TE Connectivity | Wire Labels & Markers TTMS-4.8-6 RoHS : Compliant |
| 0 | ||
| PST50W-36-S48B-H | Bel Fuse | dc-dc isolated, 50W, 9.5~75 Vdc input, 48 Vdc, 1.05 A, single regulated output, chassis mount w/ heatsink RoHS : Compliant |
| 0 | ||
| VHK75W-Q48-S48 | Bel Fuse | Isolated DC/DC Converters - Chassis Mount dc-dc isolated, 75 W, 18~75 Vdc input, 48 Vdc, 1.56 A, single output, chassis mount RoHS : Compliant |
| 0 | ||
| TCSD-05-S-48.03-01-F-N | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
 TME | 3F3SPA22S48E20XE | Amphenol Corporation | 3F3SPA22S48E20XE |
| 20 | |
| 109S484-20 | Sanyo-Denki Co Ltd | Fan: AC; 119x119x26mm; axial; 138.148m3/h; 41dBA; ball; 2900rpm RoHS : Compliant |
| 17 | ||
AM1S-4815SZ | Aimtec | Converter: DC/DC; 1W; Uin: 43.2÷52.8VDC; Uout: 15VDC; Iout: 67mA RoHS : Compliant |
| 8 | ||
| CBM101S480 | Cincon Electronics Corporation | Converter: AC/DC; PCB; Electr.connect: THT RoHS : Compliant |
| 5 | ||
| AR602.B/P/P/RS485 | Apar Industries LTD | Automation module: regulator; temperature; -999÷9990; SPST-NO |
| 1 | ||
| S48 | NKK Switches | Switch: toggle; Pos: 3; 4P3T; (ON)-OFF-(ON); 6A/250VAC; 20A/30VDC RoHS : Compliant |
| 0 | ||
| ALM150PS48 | XP Power | Power supply: switching; 48VDC; 3.1A; Out: KYCON KPPX-4P; 150W RoHS : Compliant |
| 0 | ||
| AM1S-4803SH30Z | Aimtec | Converter: DC/DC; 1W; Uin: 43.2÷52.8VDC; Uout: 3.3VDC; Iout: 303mA RoHS : Compliant |
| 0 | ||
| AR595/RS485/RJ45 | Apar Industries LTD | Converter: analog signals; for DIN rail mounting; IP20; 0÷50°C |
| 0 | ||
| AR630/P/P/S/WA/RS485 | Apar Industries LTD | Automation module: regulator; -1999÷9999; relay; OUT 2: relay |
| 0 | ||
| CHB100W-48S48-DIN | Cincon Electronics Corporation | Converter: DC/DC; 99.84W; Uin: 48VDC; Uout: 48VDC; Iin: 30mA; CHB100W RoHS : Compliant |
| 0 | ||
| CHB150W-24S48 | Cincon Electronics Corporation | Converter: DC/DC; 150W; Uin: 9÷39VDC; Uout: 48VDC; Iout: 3.12A; OUT: 1 RoHS : Compliant |
| 0 | ||
| CHB300-300S48 | Cincon Electronics Corporation | Converter: DC/DC; 300W; Uin: 180÷425VDC; Uout: 48VDC; Iout: 6.25A RoHS : Compliant |
| 0 | ||
| CHB300W-24S48-C | Cincon Electronics Corporation | Converter: DC/DC; 300W; Uin: 24VDC; Uout: 48VDC; Iin: 100mA; THT RoHS : Compliant |
| 0 | ||
| CHB350-24S48N | Cincon Electronics Corporation | Converter: DC/DC; 350.4W; Uin: 24VDC; Uout: 48VDC; Iin: 60mA; THT |
| 0 | ||
 Ameya Holding Limited | TPS48161QRGERQ1 | Texas Instruments | RoHS : Compliant | 66,272 | ||
| DS4834T-G00+T | Analog Devices Inc | 20,000 | ||||
| TS4871IDT | STMicroelectronics | TS4871 Series 5.5 V 1 W Output Rail to Rail 1W Audio Power Amplifier - SOIC-8 RoHS : Compliant | 5,100 | |||
| TS482IST | STMicroelectronics | TS482 Series 5.5 V 100 mW Surface Mount Stereo Headphone Amplifier - MSOP-8 RoHS : Compliant | 4,100 | |||
| NTMS4816NR2G | onsemi | Power MOSFET 30 V, 11 A, N-Channel, SO-8 RoHS : Compliant | 2,600 | |||
| FBMJ3216HS480NT | TAIYO YUDEN | FB-M Series 1206 48 Ohm ±30% 6 A 5 mOhm Power Line Chip Bead Inductor RoHS : Compliant | 2,000 | |||
| FBMJ3216HS480NTV | TAIYO YUDEN | FERRITE BEAD 48 OHM 1206 1LN RoHS : Compliant | 2,000 | |||
| FBMJ3216HS480NT8 | TAIYO YUDEN | RoHS : Compliant | 2,000 | |||
| NTMFS4834NT1G | onsemi | N-Channel 30 V 3 mOhm 2.31 W Surface Mount Power MOSFET - SOIC-8 RoHS : Compliant | 1,550 | |||
| LTS-4801JR | Lite-On Semiconductor Corporation | Red Single Digit 0.52 mcd 2 V Seven Segment Common Anode LED Display RoHS : Not Compliant | 900 | |||
| VS48VLNVWMTR | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| VS48VLNVWMTFTR | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
 ComSIT USA | DS485MX | Texas Instruments | AVAILABLE EU RoHS : Not Compliant | 939 | ||
| FBMJ3216HS480NT | TAIYO YUDEN | AVAILABLE EU RoHS : Compliant | 383 | |||
| S48SP05007NKFB | Delta Electronics Inc | AVAILABLE EU | 143 | |||
| CAS480M12HM3 | Wolfspeed | AVAILABLE EU RoHS : Compliant | 2,925 | |||
ComSIT USA | B43793S487T2 | TDK Electronics | Electronic Component RoHS : Compliant | 108,504 | ||
| TDF8541SDN2S484 | NXP Semiconductors | I2C-BUS CONTROLLED 4 X 45 W POWER AMPLIFIER Audio Amplifier, 44W, 4 Channel(s), 1 Func, BCDMOS, PZFM27 RoHS : Compliant | 17,724 | |||
| SS406USRWAS530A2S487CATM2Z | Everlight Electronics Co Ltd | Electronic Component RoHS : Compliant | 8,989 | |||
| SQS484ENT1GE3 | Vishay Intertechnologies | AUTOMOTIVE N-CHANNEL 40 V (D-S) 175 DEGREE CELSIUS MOSFET Power Field-Effect Transistor, 16A I(D), 40V, 0.013ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Compliant | 7,612 | |||
| T356H476M010AS4828 | KEMET Corporation | TANTALUM THROUGH-HOLE CAPACITOR Tantalum Capacitor, Polarized, Tantalum (dry/solid), 10V, 20% +Tol, 20% -Tol, 47uF, Through Hole Mount RoHS : Not Compliant | 1,495 | |||
| LTS4801G | Lite-On Semiconductor Corporation | 7 SEGMENT NUMERIC DISPLAY Smart/Normal 7 Seg Numeric LED Display, 1-Character, Green, 10mm RoHS : Not Compliant | 1,000 | |||
| VS48CTQ060PBF | Vishay Intertechnologies | SCHOTTKY RECTIFIER, 2 X 20 A Rectifier Diode, Schottky, 1 Phase, 2 Element, 20A, 60V V(RRM), Silicon, TO-220AB RoHS : Compliant | 750 | |||
| TS482ID | SGS Semiconductor Ltd | 100 MILLI WATT STEREO HEADPHONE AMPLIFIER Audio Amplifier, 0.107W, 2 Channel(s), 1 Func, PDSO8 RoHS : Not Compliant | 400 | |||
| XC9536XL10CS48C | AMD Xilinx | HIGH-PERFORMANCE CPLD Flash PLD, 10ns, 36-Cell, CMOS, PBGA48 RoHS : Not Compliant | 238 | |||
| DS485TM | National Semiconductor Corporation | LOW POWER RS-485/RS-422 MULTIPOINT TRANSCEIVER Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8 RoHS : Not Compliant | 46 | |||
| VRIS4848020A | Syko | Electronic Component RoHS : Not Compliant | 40 | |||
| DS485MNOPB | National Semiconductor Corporation | LOW POWER RS-485/RS-422 MULTIPOINT TRANSCEIVER Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8 RoHS : Compliant | 27 | |||
| DCS4808A | Delta Electronics Inc | Electronic Component RoHS : Not Compliant | 15 | |||
| XC9536XL7CS48I | AMD Xilinx | HIGH-PERFORMANCE CPLD Flash PLD, 7.5ns, 36-Cell, CMOS, PBGA48 RoHS : Not Compliant | 10 | |||
| S48SR05003ERB | Delta Electronics Inc | Analog Circuit RoHS : Not Compliant | 9 | |||
 GLYN GmbH & Co. KG | SE-CAB-RS485_CAN | ES+S | Smart Embedded RS485/CAN | 98 | ||
 Interstate Connecting Components | TTMS-4.8-6 | TE Connectivity | TTMS-4.8-6 A60289-000 RoHS : Compliant |
| 0 | |
| M85049/111S48TZ23-6D | Amphenol PCD | M85049111S48TZ23-6D | 0 | |||
| M85049/144S48N12-4 | Amphenol PCD | M85049144S48N12-4 | 0 | |||
| M85049/144S48N40-3 | Amphenol PCD | M85049144S48N40-3 | 0 | |||
| M85049/51S48W | Glenair Inc | Enhanced Durability Constructed using premium materials our backshells are built to withstand extreme conditions including high temperatures moisture and mechanical stress ensuring consistent performance in challenging military operations.EMI/RFI S RoHS : Not Compliant | 0 | |||
| SP4S48F0B9A1/AA | Amphenol Positronic | RoHS : Compliant | 0 | |||
| 280-047S4-8P8MEL-186M | Glenair Inc | SERIES 28 CONN 8#8 E-NI | 0 | |||
| M85049/109S48KZ23-6D | Amphenol PCD | M85049109S48KZ23-6D | 0 | |||
| M85049/144S48W03-5 | Amphenol PCD | M85049144S48W03-5 | 0 | |||
| M85049/144S48W20-6 | Amphenol PCD | M85049144S48W20-6 | 0 | |||
| M85049/144S48Z28-5 | Amphenol PCD | M85049144S48Z28-5 | 0 | |||
| M85049/145S48Z03 | Amphenol PCD | M85049145S48Z03 | 0 | |||
| M85049/146S48W03 | Amphenol PCD | M85049146S48W03 | 0 | |||
| M85049/146S48Z28 | Amphenol PCD | M85049146S48Z28 | 0 | |||
| HS4840810000G | Amphenol Anytek | HS-10.16- 412P GREY SOLDER PI | 0 | |||
 NexGen Digital | IS486E | Sharp Microelectronics of the Americas | 3,940 | |||
| PTVS48VS1UR | NXP Semiconductors | RoHS : Compliant | 1,824 | |||
XC9572XL-10CS48C | AMD Xilinx | RoHS : Not Compliant | 11 | |||
| DS485MX/NOPB | Texas Instruments | RoHS : Compliant | 7 | |||
 PEI Genesis | S4801-16 | SOURIAU-SUNBANK |
| 0 | ||
| S4820-20LE-30A206 | SOURIAU-SUNBANK |
| 0 | |||
| S4841R20-12 | SOURIAU-SUNBANK |
| 0 | |||
| M85049/111S48TZ23-6D | Amphenol PCD |
| 0 | |||
| M85049/144S48N12-4 | Amphenol PCD |
| 0 | |||
| M85049/144S48N40-3 | Amphenol PCD |
| 0 | |||
| M85049/109S48KZ23-6D | Amphenol PCD |
| 0 | |||
| M85049/144S48W03-5 | Amphenol PCD |
| 0 | |||
| M85049/144S48W20-6 | Amphenol PCD |
| 0 | |||
| M85049/144S48Z28-5 | Amphenol PCD |
| 0 | |||
| M85049/145S48Z03 | Amphenol PCD |
| 0 | |||
| M85049/146S48W03 | Amphenol PCD |
| 0 | |||
| M85049/146S48Z28 | Amphenol PCD |
| 0 | |||
| BGN-S48T | Microsemi Storage OTN and Networking Solutions (now Microchip) |
| 0 | |||
| HS4822-0825 | SOURIAU-SUNBANK |
| 0 | |||
 Powell Electronics | MTSW-103-09-G-S-480 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 1,450 | |
| MTSW-110-09-T-S-481 | Samtec Inc | XCede HD 1.80 mm High-Density Backplane RoHS : Compliant |
| 586 | ||
| TTMS-4.8-6 | TE Connectivity | Connectors RoHS : Compliant |
| 461 | ||
| MTSW-112-10-G-S-480 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 451 | ||
| MTLW-109-22-S-S-480 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 289 | ||
| MTMM-112-13-L-S-480 | Samtec Inc | Connector Header RoHS : Compliant |
| 287 | ||
| DW-03-09-T-S-480 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 236 | ||
| DW-06-12-S-S-480 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 184 | ||
| DW-08-09-T-S-485 | Samtec Inc | Flexible Board Stacking Header with Fixe RoHS : Compliant |
| 161 | ||
| ZW-10-10-G-S-480-236 | Samtec Inc | Flexible Board Stacking Header, 0.100" P RoHS : Compliant |
| 160 | ||
| MTSW-113-12-T-S-480-RA | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 112 | ||
| MTSW-136-09-L-S-485 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 94 | ||
| DWM-12-59-L-S-485 | Samtec Inc | Cable Assembly, Wire-to-Board, Dual-Row RoHS : Compliant |
| 83 | ||
| S48 | NKK Switches | MEDIUM CAPACITY STANDARD SIZE TOGGLE RoHS : Compliant |
| 49 | ||
| M85049/51S48W | Glenair Inc | ACCESSORIES - STRAIN RELIEF/CLAMPS RoHS : Not Compliant |
| 24 | ||
 PUI | 9111-4MS48AFS101C7PU-A001 | 5,000 | ||||
| 9B1TS48P0G001 | Sanyo-Denki Co Ltd | RoHS : Compliant |
| 50 | ||
 Chip 1 Exchange | US4881LUC-AAA-100-WB | Melexis Microelectronic Integrated Systems | INSTOCK | 343,924 | ||
| MAX6394US480D1/V+T | MAXAD | INSTOCK | 23,697 | |||
| NTMS4816NR2G | onsemi | INSTOCK RoHS : Compliant | 11,980 | |||
| B591S4-8803-U031 | INSTOCK | 5,600 | ||||
| SIT1602BC-13-XXS-48.000000 | SiTime Corporation | INSTOCK RoHS : Compliant | 4,783 | |||
| T491D686M010AS4820R087 | KEMET Corporation | INSTOCK | 2,500 | |||
| FDS4897C | onsemi | INSTOCK RoHS : Compliant | 1,794 | |||
| TTMS-4.8-1 | TE Connectivity | INSTOCK | 1,781 | |||
| 5HT-48030AS-480 | TOKO Inc | INSTOCK | 549 | |||
| PMAS48 | INSTOCK | 178 | ||||
| NEC42S4800-70 | NEC Electronics Group | INSTOCK | 170 | |||
| 1005S48HNR | INSTOCK | 100 | ||||
| XC9572XL10-CS48I | AMD | INSTOCK | 97 | |||
| G6A-234P-ST-US-48VDC | OMRON Corporation | INSTOCK | 32 | |||
| XWS4805-TS REV. 302 | PWONE | INSTOCK | 17 | |||
 Avnet Abacus | FBMJ3216HS480NT | TAIYO YUDEN | (Alt: CGHMK107C7224KA8TE) RoHS : Compliant | 114,000 | ||
| AKM90PS48 | XP Power | ACDC Power Supply ITE Medical 1 Output 90 W 48 VDC 188 A (Alt: AKM90PS48) RoHS : Compliant | 26 | |||
| AQM250PS48 | XP Power | (Alt: AQM250PS48) RoHS : Compliant | 3 | |||
| CCR200PS48 | XP Power | ACDC Enclosed Power Supply PSU ITE Industrial Medical 1 Outputs 110 W 48 V 229 A (Alt: CCR200PS48) RoHS : Compliant | 0 | |||
| CCR550PS48 | XP Power | ACDC Enclosed Power Supply PSU 550W Fan Cooled ITE Industrial Medical 1 Outputs 230 W (Alt: CCR550PS48) RoHS : Compliant | 0 | |||
| SMM400PS48 | XP Power | ACDC Open Frame Power Supply PSU ITE Industrial Medical 1 Output 400W 23CFM 250 W (Alt: SMM400PS48) RoHS : Compliant | 0 | |||
| DJ06S4803H | Eltek | (Alt: DJ06S4803H) RoHS : Compliant | 0 | |||
| DN03S4805A | Eltek | (Alt: DN03S4805A) RoHS : Compliant | 0 | |||
| DE03S4812A | Eltek | Module DCDC 1OUT 12V 025A 3W 7Pin DIP (Alt: DE03S4812A) RoHS : Compliant | 0 | |||
| DH06S4812A | Eltek | Isolated Through Hole DCDC Converter ITE Medical 21 6 W 1 Output Fixed 12 V 500 mA (Alt: DH06S4812A) RoHS : Compliant | 0 | |||
| DH06S4815H | Eltek | (Alt: DH06S4815H) RoHS : Compliant | 0 | |||
| ECL10US48-E | XP Power | ACDC PCB Mount Power Supply PSU ITE 1 Output 10 W 48 VDC 210 mA (Alt: ECL10US48-E) RoHS : Compliant | 0 | |||
| ECE60US48-S | XP Power | ACDC Enclosed Power Supply PSU ITE 1 Outputs 60 W 48 VDC 125 A (Alt: ECE60US48-S) RoHS : Compliant | 0 | |||
| RCL175PS48-F | XP Power | (Alt: RCL175PS48-F) RoHS : Compliant | 0 | |||
| RWR80S48R7FRB12 | Vishay Intertechnologies | Through Hole Resistor 487 ohm RWR Series 2 W 1 Axial Leaded Wirewound 20ppmC (Alt: RWR80S48R7FRB12) RoHS : Not Compliant | 0 | |||
Avnet Asia | TS480GSSD910T-FLP | Transcend Information Inc | (Alt: TS480GSSD910T-FLP) RoHS : Compliant | 0 | ||
| PTVS48VP1UP,115 | Nexperia | TVS Diode, PTVSxP1UP Series, Unidirectional, 48 V, 77.4 V, CFP5 (SOD-128), 2 Pins (Alt: PTVS48VP1UP,115) RoHS : Compliant | 0 | |||
| MURS480ET3G | onsemi | (Alt: MURS480ET3G) RoHS : Compliant | 0 | |||
| ECS-480-8-36-RWN-TR | ECS International Inc | Crystal, Standard, 48 MHz, SMD, 2.5mm x 2mm x 0.55mm, 15 ppm, 8 pF, 15 ppm, ECX-2236 (Alt: ECS-480-8-36-RWN-TR) RoHS : Compliant | 0 | |||
| FBMJ3216HS480NT | TAIYO YUDEN | (Alt: FBMJ3216HS480NT) RoHS : Compliant | 0 | |||
| ECS-480-8-33B-CWN-TR | ECS International Inc | (Alt: ECS-480-8-33B-CWN-TR) RoHS : Compliant |
| 0 | ||
| SQS484ENW-T1_GE3 | Vishay Intertechnologies | (Alt: SQS484ENW-T1_GE3) RoHS : Compliant | 0 | |||
| NPIS48LP2R2MTRF | NIC Components Corp | (Alt: NPIS48LP2R2MTRF) RoHS : Compliant | 0 | |||
| SQS484CENW-T1_GE3 | Vishay Intertechnologies | Transistor MOSFET N-CH 40V 16A 8-Pin PowerPAK 1212 (Alt: SQS484CENW-T1_GE3) RoHS : Compliant | 0 | |||
| ECS-480-7-33B2-CKM-TR3 | ECS International Inc | (Alt: ECS-480-7-33B2-CKM-TR3) RoHS : Compliant | 0 | |||
 Avnet Silica | IS485E | Sharp Microelectronics of the Americas | Photodetector Optoschmitt 3Pin (Alt: IS485E) RoHS : Compliant | 20,000 | ||
| TS482IST | STMicroelectronics | Audio Amp Headphone 2CH Stereo 0107W ClassAB 8Pin MSOP TR (Alt: TS482IST) RoHS : Compliant | 12,000 | |||
| PTVS48VP1UP,115 | Nexperia | TVS Diode PTVSxP1UP Series Unidirectional 48 V 774 V CFP5 SOD128 2 Pins (Alt: PTVS48VP1UP,115) RoHS : Compliant | 6,000 | |||
| IS486E | Sharp Microelectronics of the Americas | Photodetector Optoschmitt 3Pin (Alt: IS486E) RoHS : Compliant | 0 | |||
| MURS480ET3G | onsemi | 800 V 40 A Ultrafast Rectifier (Alt: MURS480ET3G) RoHS : Compliant | 0 | |||
| CS48L11-CNZR | Cirrus Logic | (Alt: CS48L11-CNZR) RoHS : Compliant | 0 | |||
| CS48L10-CNZR | Cirrus Logic | DSP FixedPoint 32Bit 120MHz 24Pin QFN TR (Alt: CS48L10-CNZR) RoHS : Compliant | 0 | |||
| ATRS485-XPRO | Microchip Technology Inc | Daughter Board Evaluation Board for RS485RS422 Transceiver For Xplained PRO (Alt: ATRS485-XPRO) RoHS : Compliant | 0 | |||
| TDA75610S-48X | STMicroelectronics | Audio Amp Speaker 4CH Stereo 68W ClassSB 27Pin FlexiwattVertical Tube (Alt: TDA75610S-48X) RoHS : Compliant | 0 | |||
| CS48LV13-CNZR | Cirrus Logic | Ultralow Power HD Voice Processor 24Pin QFN TR (Alt: CS48LV13-CNZR) RoHS : Compliant | 0 | |||
| EVX12DS480AZP | Teledyne HiRel | Digital to Analog Converter 1 Channel 12 bit Voltage Serial Microwire 475 V to 525 V (Alt: EVX12DS480AZP) RoHS : Compliant | 0 | |||
| PTVS48VS1UR-QX | Nexperia | (Alt: PTVS48VS1UR-QX) RoHS : Compliant | 0 | |||
NTMFS4897NFT1G | onsemi | Single NChannel Power MOSFET 30V 171A 2mO (Alt: NTMFS4897NFT1G) RoHS : Compliant | 0 | |||
| PTVS48VP1UP-QX | Nexperia | (Alt: PTVS48VP1UP-QX) RoHS : Compliant | 0 | |||
| EV12DS480AMZP-E3 | Teledyne HiRel | Digital to Analog Converter 1 Channel 12 bit Voltage Serial Microwire 475 V to 525 V (Alt: EV12DS480AMZP-E3) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | CBM300S480 | Cincon Electronics Corporation | ITE/Industrial Brick Power |
| 0 | |
CHB200W-24S48 | Cincon Electronics Corporation | Isolated DC/DC Converters RoHS : Compliant |
| 0 | ||
| CHB75W-48S48N | Cincon Electronics Corporation | Isolated DC/DC Converters RoHS : Compliant |
| 0 | ||
| CFB400W-24S48 | Cincon Electronics Corporation | Isolated DC/DC Converters RoHS : Compliant |
| 0 | ||
| CFM25S480 PL | Cincon Electronics Corporation | OPEN FRAME AC-DC MODULES |
| 0 | ||
| CFM50S480-SD | Cincon Electronics Corporation | OPEN FRAME AC-DC MODULES RoHS : Compliant |
| 0 | ||
| CFM70S480-S | Cincon Electronics Corporation | OPEN FRAME AC-DC MODULES RoHS : Compliant |
| 0 | ||
EC2600TS-48.000M TR | Abracon Corporation | Standard Clock Oscillator 48.000MHz SMD 5.0mm x 7.0mm 100ppm -10C to +70C RoHS : Unknown |
| 0 | ||
| CFM50S480-CA | Cincon Electronics Corporation | OPEN FRAME AC-DC MODULES RoHS : Compliant |
| 0 | ||
| CHB300W-48S48 | Cincon Electronics Corporation | Isolated DC/DC Converters RoHS : Compliant |
| 0 | ||
| CQB100W8-36S48N | Cincon Electronics Corporation | DC-DC Converter RoHS : Compliant |
| 0 | ||
| CQB50W8-36S48 | Cincon Electronics Corporation | RAILWAY BRICK DC-DC RoHS : Compliant |
| 0 | ||
| AMMLPEALRS-48.0000T | Abracon Corporation |
| 0 | |||
| AMMLPVBVRS-48.0000T | Abracon Corporation |
| 0 | |||
| CHB200W-110S48-C | Cincon Electronics Corporation | RAILWAY BRICK DC-DC RoHS : Compliant |
| 0 | ||
 DB Roberts | M1653-B-2545-SS-48 | RAF Electronic Hardware | 0 | |||
| AFS48420A | Essentra Components | 48MM BASE 516-18 THREAD X 1.5 | 0 | |||
| 1229-25-SS-48 | RAF Electronic Hardware | 0 | ||||
| LCBS-4-8-01 | Essentra Components | CB SptNon-LckNatural1/2 in Spc CB Spt Non-Lock Natural | 0 | |||
| ZL-1504-OS-48 | Sugatsune Kogyo Co Ltd | DOOR PULL | 0 | |||
| AFS48480A | Essentra Components | 48MM BASE 38-16 THREAD X 2 LEN | 0 | |||
| 1685-1032-SS-48 | RAF Electronic Hardware | ROUND FEMALE STANDOFF 1/4 RD X 9/16 LENGTH PASSIVATE AMS 2700 | 0 | |||
| DLCBS4-8-01 | Essentra Components | CB SptDual LckNatural.740 in Spc CB Spt Dual Lck Natural | 0 | |||
| 2254-2520-SS-48 | RAF Electronic Hardware | 0 | ||||
| AFS48540A | Essentra Components | 48MM BASE 12-13 THREAD X 2.75 | 0 | |||
| 1684-1032-SS-48 | RAF Electronic Hardware | ROUND FEMALE STANDOFF 1/4 RD X 1/2 LENGTH PASSIVE AMS 2700 TY | 0 | |||
| ZL-1504-IS-48 | Sugatsune Kogyo Co Ltd | DOOR PULL | 0 | |||
| AFS48500A | Essentra Components | 0 | ||||
| 1107T-2-SS-48 | RAF Electronic Hardware | ROUND SPACERS 3/16 RD X 5/32 X .090 ID | 0 | |||
| SRS4-8-01 | Essentra Components | SpacerSlf Ret 4 ScrNat1/2 in Spc | 0 | |||
 EBV Elektronik | BTS4880RAUMA1 | Infineon Technologies AG | Smart Power Switch SIPMOS Technology High Side 8 Outputs 45V 14A SOIC36 (Alt: SP000276938) RoHS : Compliant | 10,400 | ||
| BFS483H6327XTSA1 | Infineon Technologies AG | Bipolar RF Transistor Dual NPN 12 V 8 GHz 450 mW 65 mA SOT363 (Alt: SP000750464) RoHS : Compliant | 9,000 | |||
| VS-48CTQ060-M3 | Vishay Intertechnologies | (Alt: VS-48CTQ060-M3) RoHS : Compliant | 4,650 | |||
| VS-48CTQ060STRL-M3 | Vishay Intertechnologies | (Alt: VS-48CTQ060STRL-M3) RoHS : Compliant | 4,000 | |||
| VS-48CTQ060S-M3 | Vishay Intertechnologies | Schottky Rectifier 60 V 40 A Dual Common Cathode TO263AB 3 Pins 830 mV (Alt: VS-48CTQ060S-M3) RoHS : Compliant | 1,250 | |||
| MURS480ET3G | onsemi | 800 V 40 A Ultrafast Rectifier (Alt: MURS480ET3G) RoHS : Compliant | 0 | |||
| TDA75610S-48X | STMicroelectronics | Audio Amp Speaker 4CH Stereo 68W ClassSB 27Pin FlexiwattVertical Tube (Alt: TDA75610S-48X) RoHS : Compliant | 0 | |||
| NTMFS4852NT3G | onsemi | Single NChannel Power MOSFET 30V 155A 21mO (Alt: NTMFS4852NT3G) RoHS : Compliant | 0 | |||
| SQS484EN-T1-GE3 | Vishay Intertechnologies | NCHANNEL 40V DS 175C MOSFET (Alt: SQS484EN-T1-GE3) RoHS : Compliant | 0 | |||
| CY8C4125PVS-482Z | Infineon Technologies AG | (Alt: SP005643057) RoHS : Compliant | 0 | |||
| SQS486CENW-T1_GE3 | Vishay Intertechnologies | Power MOSFET N Channel 40 V 18 A 00041 ohm PowerPAK 12128W Surface Mount (Alt: SQS486CENW-T1_GE3) RoHS : Compliant | 0 | |||
| CYAT81650-64AS48T | Infineon Technologies AG | (Alt: SP005656517) RoHS : Compliant | 0 | |||
| SQS484CENW-T1_BE3 | Vishay Intertechnologies | Automotive NChannel 40 V DS 175 C MOSFET (Alt: SQS484CENW-T1_BE3) RoHS : Compliant | 0 | |||
| SPHWHTB5N9A0CERS48 | Samsung Electronics Co. Ltd | 10W WHT 3CHIPSI3CH10WG15500KSMC (Alt: SPHWHTB5N9A0CERS48) RoHS : Compliant | 0 | |||
| VS-48CTQ060STRR-M3 | Vishay Intertechnologies | (Alt: VS-48CTQ060STRR-M3) RoHS : Compliant | 0 | |||
 Flip Electronics | NVTFS4824NTWG | onsemi | Stock, Ship Today RoHS : Compliant | 170,000 | ||
| NVTFS4824NTAG | onsemi | Stock, Ship Today RoHS : Compliant | 22,500 | |||
| NTMFS4821NT1G | onsemi | Stock, Ship Today RoHS : Compliant | 19,500 | |||
| 9EPRS488CKLF | Integrated Device Technology Inc | Stock, Ship Today RoHS : Compliant | 12,226 | |||
| 9EPRS488CKLFTR | Integrated Device Technology Inc | Stock | 12,226 | |||
| 9EPRS488CKLFT | Integrated Device Technology Inc | Stock RoHS : Compliant | 12,226 | |||
| ICS9EPRS488CKLF | Integrated Device Technology Inc | Stock | 12,226 | |||
| NTTFS4821NTAG | onsemi | Stock, Ship Today RoHS : Compliant | 5,039 | |||
| NVTFS4823NWFTWG | onsemi | Stock, Ship Today RoHS : Compliant | 5,000 | |||
| NTMFS4851NT1G | onsemi | Stock, Ship Today RoHS : Compliant | 3,000 | |||
| NTMFS4834NT1G | onsemi | Stock, Ship Today RoHS : Compliant | 1,260 | |||
| CY8C4548AZI-S483 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant | 870 | |||
| CY8C4548AZQ-S485 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant | 640 | |||
| CY8C4548AZQ-S483 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant | 500 | |||
| NTMS4816NR2G | onsemi | Stock, Ship Today RoHS : Compliant | 1 | |||
 Master Electronics | PSM-ME-RS485/RS485-P | Phoenix Contact | Repeater - for potential separation and range increase in RS-485 2-wire bus systems - 3-way isolation - rail-mountable RoHS : Compliant |
| 4 | |
| PCMAS48S48 | MTM Power | AC/DC Power Supply - 48W - 48VDC - Input 100-240 VAC - Chassis Mount - cUL/UL certified RoHS : Compliant |
| 3 | ||
| TW-03-04-H-S-487-SM | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-04-06-F-S-488-SM | Samtec Inc | 2Mm Terminal Strips |Samtec Inc. TW-04-06-F-S-488-SM RoHS : Compliant |
| 0 | ||
| TW-05-04-F-S-485-SM | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-05-04-L-S-487-SM | Samtec Inc | 2Mm Terminal Strips |Samtec Inc. TW-05-04-L-S-487-SM RoHS : Compliant |
| 0 | ||
| TW-09-04-T-S-487-SM | Samtec Inc | 2Mm Terminal Strips |Samtec Inc. TW-09-04-T-S-487-SM RoHS : Compliant |
| 0 | ||
| TW-12-04-T-S-487-SM | Samtec Inc | Conn Board Stacker HDR 12 POS 2mm Solder ST SMD RoHS : Compliant |
| 0 | ||
| TW-14-04-TL-S-487-SM | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-14-06-F-S-485-SM | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-18-06-F-S-483-SM-100-P- | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TW-26-06-F-S-488-SM-100 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| RPA50S-4805SW/P | RECOM Power GmbH | The RPA50S-4805SW/P is a regulated 50W DC/DC converter in a 1/16th brick package featuring a wide 18-75VDC input range and a 5VDC 10A output. RoHS : Compliant |
| 0 | ||
| RS-4812SZ/H3 | RECOM Power GmbH | 2W DC/DC-Converter 'ECONOLINE' SIP8 3kV reg 4: 1; V. In: 18-72; V. Out: 12; mA. Out: 166 RoHS : Compliant |
| 0 | ||
| TCSD-05-S-48.03-01-F-N | Samtec Inc | Cable Assembly Flat Ribbon 1.219m 28AWG 10 POS IDC Connector SKT IDT Bulk RoHS : Compliant |
| 0 | ||
 Neutron USA | ECL10US48-E | XP Power | Power Supply; AC-DC; 10W power supply, encapsulated RoHS : Compliant |
| 50 | |
| DRS-480-36 | Mean Well | DIN Rail Power Supplies 480W 36V 0-13.3A DIN Rail All-In-One Intelligent Security Power Supply RoHS : Compliant |
| 31 | ||
| CCR200PS48 | XP Power | Switching Power Supplies AC-DC power supply 48VDC 4.16A RoHS : Compliant |
| 24 | ||
| 1250A-1S-480 | Bourns Inc | Surge Suppressors AC SPD, 1W-G,550VAC RoHS : Compliant |
| 24 | ||
| ATS-HP-F6L100S48W-324 | Advanced Thermal Solutions Inc | Heat Sinks Heat Pipe, Copper, High Performance, Flat, 100x7.23x4.5mm |
| 12 | ||
| ECE60US48-S | XP Power | Power Supply; AC-DC; 48V, 1.25A; 90-264V In; Encapsulated; 60W; Panel; ECE60 Series RoHS : Compliant |
| 9 | ||
| CCR550PS48 | XP Power | Power Supplies - Chassis Mount 550W 48VDC 11.4A |
| 5 | ||
| CCH600PS48 | XP Power | Switching Power Supplies PSU, 600W, ENCLOSED, BASE PLATE COOLED RoHS : Compliant |
| 4 | ||
| BI5U-Q08-AP6X2-0.6-RS4/S480-S481 | TURCK Inc | Inductive ProXimity Sensor, Rectang H 8mm, R: 5mm flush, DC 3-wire NO, PNP, 0.6m cable M12 Conn |
| 0 | ||
| SDM300PS48 | XP Power | Switching Power Supplies STD AC-DC U-CHANNEL PSU MEDICAL 300W |
| 0 | ||
| VHK75W-Q48-S48 | CUI Inc | Isolated DC/DC Converters dc-dc isolated, 75 W, 18 75 Vdc input, 48 Vdc, 1.56 A, single output, chassis mount RoHS : Compliant |
| 0 | ||
| SMM400PS48 | XP Power | Switching Power Supplies SINGLE O/P OPEN FRAME PSU, 400W,48V RoHS : Compliant |
| 0 | ||
| DH06S4812A | Delta Electronics Inc | Isolated DC/DC Converters 12Vout 6W, 36-75Vin RoHS : Compliant |
| 0 | ||
| HPA1K5PS48 | XP Power | Modular Power Supplies AC-DC 1500W ITE & MEDICAL RoHS : Compliant |
| 0 | ||
| CFM50S480-CA | Cincon Electronics Corporation | Switching Power Supplies 50W 48V 1.04A Cover RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3W00677LF/HS-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm, Length: 48 inches. SMB Jack to BNC Male Cable 48 Inch Length Using RG196 Coax with HeatShrink, LF Solder., Radio frequency assembly SMB jack to BNC male cable 48 inch length using RG196 coax with heatshrink, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMB jack to BNC male cable 48 inch length using RG196 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and BNC cable connection on the other. Our SMB to BNC cable assemblies have a jack gender on end 1 and male on end 2. This SMB to BNC cable is a jack to male coax assembly, PE3W00677LF/HS-48, can also be known as a SMB female to BNC plug cable assembly and will be shipped same-day as it is purchased. SMB female to BNC plug cable assembly PE3W00677LF/HS-48 is built with RG196 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 400 MHz maximum frequency SMB jack to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00677LF/HS-48 can also be used in the other direction and will be BNC male to SMB jack cable assembly if the opposite connectivity is required. SMB female to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to BNC cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB jack to BNC male cable 48 inch length using RG196 coax with heatshrink, LF solder. |
| 8 | |
| PE39570/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Water Blue FAKRA Plug to FAKRA Jack Cable 48 Inch Length Using RG174 Coax with HeatShrink., Radio frequency assembly water blue FAKRA plug to FAKRA jack cable 48 inch length using RG174 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Water blue FAKRA plug to FAKRA jack cable 48 inch length using RG174 coax with heatshrink, FAKRA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FAKRA cable connection on one end and FAKRA cable connection on the other. Our FAKRA to FAKRA cable assemblies have a plug gender on end 1 and jack on end 2. PE39570/HS-48 can also be known as a FAKRA male to FAKRA female cable assembly and will be shipped same-day as it is purchased. FAKRA male to FAKRA female cable assembly PE39570/HS-48 is built with RG174 which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to FAKRA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency FAKRA plug to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE39570/HS-48 can also be used in the other direction and will be FAKRA jack to FAKRA plug cable assembly if the opposite connectivity is required. FAKRA male to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to FAKRA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this water blue FAKRA plug to FAKRA jack cable 48 inch length using RG174 coax with heatshrink. |
| 0 | ||
| PE3C0046LF/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to N Male Low Loss Cable 48 Inch Length Using LMR-400 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable 48 inch length using LMR-400 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 48 inch length using LMR-400 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3C0046LF/HS-48 can also be known as a low loss type N plug to N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C0046LF/HS-48 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 48 inch length using LMR-400 coax with heatshrink, LF solder. |
| 0 | ||
| PE3C0754LF/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to SMA Male Right Angle Low Loss Cable 48 Inch Length Using LMR-100 Coax with HeatShrink, LF Solder., Radio frequency assembly SMA male to SMA male right angle low loss cable 48 inch length using LMR-100 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA male right angle low loss cable 48 inch length using LMR-100 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our low loss SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C0754LF/HS-48 can also be known as a low loss SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C0754LF/HS-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0754LF/HS-48 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle low loss cable 48 inch length using LMR-100 coax with heatshrink, LF solder. |
| 0 | ||
| PE3C1155/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Water Blue FAKRA Jack Right Angle to FAKRA Jack Cable 48 Inch Length Using RG174 Coax with HeatShrink., Radio frequency assembly water blue FAKRA jack right angle to FAKRA jack cable 48 inch length using RG174 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The water blue FAKRA jack right angle to FAKRA jack cable 48 inch length using RG174 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FAKRA to FAKRA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle FAKRA cable connection on one end and a FAKRA cable connection on the other. Our right angle FAKRA to FAKRA cable assembly has a jack gender on end 1 and a jack on end 2. PE3C1155/HS-48 can also be known as a right angle FAKRA female to FAKRA female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. Our PE3C1155/HS-48 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has an in-series connection. Our right angle FAKRA jack to FAKRA jack cable has a maximum VSWR of 1.4:1. FAKRA female to FAKRA female cable assembly PE3C1155/HS-48 is built with RG174 which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with right angle FAKRA to FAKRA cable connectors, has a 50 Ohm impedance, and is single shielded.Both connectors have a crimp/solder attachment method and a plastic body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C1155/HS-48 can also be used in the other direction and will be a FAKRA jack to right angle FAKRA jack cable assembly if the opposite connectivity is required. FAKRA right angle female to FAKRA female cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FAKRA to FAKRA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FAKRA to FAKRA RF cable assembly as per your requirements. |
| 0 | ||
| PE3C1548/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male to N Male Low Loss Cable 48 Inch Length Using LMR-600-DB Coax with HeatShrink., Radio frequency assembly N male to N male low loss cable 48 inch length using LMR-600-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 48 inch length using LMR-600-DB coax with heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C1548/HS-48 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to type N plug cable assembly PE3C1548/HS-48 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 48 inch length using LMR-600-DB coax with heatshrink. |
| 0 | ||
| PE3C1966/HS-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: FAKRA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FAKRA, Connector Gender 2: Jack, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length: 48 inches. Water Blue FAKRA Jack Right Angle to FAKRA Jack Right Angle Flexible Cable 48 Inch Length Using RG174 Coax with HeatShrink., Radio frequency assembly water blue FAKRA jack right angle to FAKRA jack right angle flexible cable 48 inch length using RG174 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Water blue FAKRA jack right angle to FAKRA jack right angle flexible cable 48 inch length using RG174 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax flexible cable assembly is built with right angle FAKRA cable connection on one end and right angle FAKRA cable connection on the other. Our flexible right angle FAKRA to right angle FAKRA cable assemblies have a jack gender on end 1 and jack on end 2. This FAKRA to FAKRA cable is a jack to jack coax assembly, PE3C1966/HS-48, can also be known as a flexible right angle FAKRA female to right angle FAKRA female cable assembly and will be shipped same-day as it is purchased. FAKRA female to FAKRA female cable assembly PE3C1966/HS-48 is built with RG174 which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with right angle FAKRA to right angle FAKRA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency FAKRA right angle jack to FAKRA right angle jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Flexible FAKRA right angle female to FAKRA right angle female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to FAKRA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this water blue FAKRA jack right angle to FAKRA jack right angle flexible cable 48 inch length using RG174 coax with heatshrink. |
| 0 | ||
| PE3C2037/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to SMA Female Low Loss Cable 48 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly SMA male to SMA female low loss cable 48 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to SMA female low loss cable 48 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom SMA to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax low loss cable assembly is built with a SMA cable connection on one end and a SMA cable connection on the other. Our low loss a SMA to a SMA cable assembly has male gender on end 1 and female on end 2. PE3C2037/HS-48 can also be known as a low loss SMA plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2037/HS-48 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. SMA plug to SMA jack cable assembly PE3C2037/HS-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors and has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3C2037/HS-48 can also be used in the other direction and will be SMA female to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to SMA jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C2684/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Male Right Angle to SMA Male Cable 48 Inch Length Using RG316 Coax with HeatShrink., Radio frequency assembly N male right angle to SMA male cable 48 inch length using RG316 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N male right angle to SMA male cable 48 inch length using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a right angle type N cable connection on one end and a SMA cable connection on the other. Our right angle type N to SMA cable assembly has a male gender on end 1 and a male on end 2. PE3C2684/HS-48 can also be known as a right angle type N plug to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. Our PE3C2684/HS-48 RF cable has a FEP jacket of 0.102-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. Our right angle type N male to SMA male cable has a maximum VSWR of 1.4:1. Type N plug to SMA plug cable assembly PE3C2684/HS-48 is built with RG316 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to SMA cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C2684/HS-48 can also be used in the other direction and will be a SMA male to right angle type N male cable assembly if the opposite connectivity is required. Type N right angle plug to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SMA cable assembly for quick shipment worldwide. Variations of type N and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W02022/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. SMA Male to SMA Male Right Angle Cable 48 Inch Length Using RG316 Coax with HeatShrink., Radio frequency assembly SMA male to SMA male right angle cable 48 inch length using RG316 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to SMA male right angle cable 48 inch length using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3W02022/HS-48 can also be known as a SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3W02022/HS-48 is built with RG316 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W02022/HS-48 can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle cable 48 inch length using RG316 coax with heatshrink. |
| 0 | ||
| PE3W06336/HS-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 48 inches. TNC Male to TNC Male Right Angle Cable 48 Inch Length Using RG316 Coax with HeatShrink., Radio frequency assembly TNC male to TNC male right angle cable 48 inch length using RG316 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. TNC male to TNC male right angle cable 48 inch length using RG316 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and right angle TNC cable connection on the other. Our TNC to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. This TNC to TNC cable is a male to male coax assembly, PE3W06336/HS-48, can also be known as a TNC plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W06336/HS-48 is built with RG316 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 2.5 GHz maximum frequency TNC male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06336/HS-48 can also be used in the other direction and will be right angle TNC male to TNC male cable assembly if the opposite connectivity is required. TNC plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to TNC male right angle cable 48 inch length using RG316 coax with heatshrink. |
| 0 | ||
| PE3W07357/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. Water Blue FAKRA Jack to SMA Male Cable 48 Inch Length Using RG174 Coax with HeatShrink., Radio frequency assembly water blue FAKRA jack to SMA male cable 48 inch length using RG174 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The water blue FAKRA jack to SMA male cable 48 inch length using RG174 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom FAKRA to SMA cable assembly orders will the ship same business day as well. Pasternack RF coax cable assembly is built with a FAKRA cable connection on one end and a SMA cable connection on the other. Our a FAKRA to a SMA cable assembly has jack gender on end 1 and male on end 2. PE3W07357/HS-48 can also be known as a FAKRA female to SMA plug cable assembly and will be shipped the same day as it is purchased. This RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. Our PE3W07357/HS-48 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 80 degrees C. The flexible RF cable has a between series connection. FAKRA female to SMA plug cable assembly PE3W07357/HS-48 is built with RG174 which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to SMA cable connectors and has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3W07357/HS-48 can also be used in the other direction and will be SMA male to FAKRA jack cable assembly if the opposite connectivity is required. FAKRA female to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality FAKRA to SMA cable assembly for quick shipment worldwide. Variations of FAKRA and SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal FAKRA to SMA RF cable assembly as per your requirements. |
| 0 | ||
| PE3W12096LF/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SSMB, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Female Bulkhead to SSMB Jack Bulkhead Low Loss Cable 48 Inch Length Using LMR-100 Coax with HeatShrink, LF Solder., Radio frequency assembly N female bulkhead to SSMB jack bulkhead low loss cable 48 inch length using LMR-100 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female bulkhead to SSMB jack bulkhead low loss cable 48 inch length using LMR-100 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to SSMB cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N bulkhead cable connection on one end and a SSMB bulkhead cable connection on the other. Our low loss type N to SSMB cable assembly has a female gender on end 1 and a jack on end 2. PE3W12096LF/HS-48 can also be known as a low loss type N jack to SSMB female cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W12096LF/HS-48 RF cable has a PVC jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Type N jack to SSMB female cable assembly PE3W12096LF/HS-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to SSMB cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W12096LF/HS-48 can also be used in the other direction and will be a SSMB jack bulkhead to type N female bulkhead cable assembly if the opposite connectivity is required. Low loss type N jack bulkhead to SSMB female bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to SSMB cable assembly for quick shipment worldwide. Variations of type N and SSMB cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to SSMB low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W12421/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. 7/16 DIN Male to N Male Low Loss Cable 48 Inch Length Using LMR-600-DB Coax with HeatShrink., Radio frequency assembly 7/16 DIN male to N male low loss cable 48 inch length using LMR-600-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 7/16 DIN male to N male low loss cable 48 inch length using LMR-600-DB coax with heatshrink, 7/16 DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 7/16 DIN cable connection on one end and N type cable connection on the other. Our low loss 7/16 DIN to type N cable assemblies have a male gender on end 1 and male on end 2. PE3W12421/HS-48 can also be known as a low loss 7/16 DIN plug to N type plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N plug cable assembly PE3W12421/HS-48 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency 7/16 DIN male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12421/HS-48 can also be used in the other direction and will be type N male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low loss 7/16 DIN plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to N type cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to N male low loss cable 48 inch length using LMR-600-DB coax with heatshrink. |
| 0 | ||
| PE3C2139/HS-48 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. BNC Male to BNC Male Low Loss Cable 48 Inch Length Using LMR-100 Coax with HeatShrink., Radio frequency assembly BNC male to BNC male low loss cable 48 inch length using LMR-100 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The BNC male to BNC male low loss cable 48 inch length using LMR-100 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to BNC cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a BNC cable connection on one end and a BNC cable connection on the other. Our low loss BNC to BNC cable assembly has a male gender on end 1 and a male on end 2. PE3C2139/HS-48 can also be known as a low loss BNC plug to BNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PE dielectric type. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C2139/HS-48 RF cable has a PVC jacket of 0.110-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our BNC male to BNC male cable has a maximum VSWR of 1.4:1. BNC plug to BNC plug cable assembly PE3C2139/HS-48 is built with LMR-100A which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/crimp attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss BNC plug to BNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to BNC low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
 TE Connectivity | SSR3S-480D50R | TE Connectivity | SSR3S-480D50R=3PH SERIS-SCR,PANEL MOUNT Input Voltage Type: DC Contact Arrangement: 1 Form A SPST-NO Load Voltage Rating: 48 – 480 Vrms Output Switching: Random Load Voltage Type: AC DC 1 Form A SPST-NO 48 – 480 Vrms Random | Solid State Relay | Part Number: SSR3S-480D50R | Internal Number: 2-2345984-2 | TE Connectivity RoHS : Compliant |
| 9 | |
| SSR3S-480A50 | TE Connectivity | SSR3S-480A50=3PH SERIS-SCR,PANEL MOUNT Input Voltage Type: AC Contact Arrangement: 1 Form A SPST-NO Input Voltage Range: 90 – 280 VAC Load Voltage Rating: 48 – 480 Vrms Output Switching: Zero AC 1 Form A SPST-NO 90 – 280 VAC 48 – 480 Vrms | Solid State Relay | Part Number: SSR3S-480A50 | Internal Number: 2345984-8 | TE Connectivity RoHS : Compliant |
| 2 | ||
 Vyrian | RPA50S-4805SW/P | RECOM Power GmbH | DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid RoHS : Compliant | 16,842 | ||
| TMS48C121-80DZ | Texas Instruments | Video DRAM, 128KX8, 80ns, CMOS, PDSO40 RoHS : Not Compliant | 9,838 | |||
| SNJ54S484AJ | Texas Instruments | Arithmetic Circuit, TTL, CDIP20 RoHS : Not Compliant | 8,033 | |||
| SN74LS48N3 | Texas Instruments | Decoder/Driver, TTL, PDIP16 RoHS : Not Compliant | 6,679 | |||
| MAX6422XS48+ | Analog Devices Inc | Power Supply Support Circuit RoHS : Compliant | 5,877 | |||
| SN74S484AN | Texas Instruments | Arithmetic Circuit, TTL, PDIP20 RoHS : Not Compliant | 4,673 | |||
| SNC54S482J | Texas Instruments | Bit-Slice Processor, TTL, CDIP20 RoHS : Not Compliant | 4,529 | |||
| TS4871IDT | STMicroelectronics | Audio Amplifier, 1W, 1 Channel(s), 1 Func, PDSO8 RoHS : Compliant | 3,986 | |||
| XC6SLX45T-N3CS484C | AMD Xilinx | Field Programmable Gate Array, 806MHz, 43661-Cell, CMOS, PBGA484 RoHS : Not Compliant | 3,905 | |||
| XC6SLX100-L1CS484I | AMD Xilinx | Field Programmable Gate Array, 500MHz, 101261-Cell, CMOS, PBGA484 RoHS : Not Compliant | 3,322 | |||
| XC6SLX100T-3CS484C | AMD Xilinx | Field Programmable Gate Array, 862MHz, 101261-Cell, CMOS, PBGA484 RoHS : Not Compliant | 3,299 | |||
TMS48C128-70DJ | Texas Instruments | Fast Page DRAM, 128KX8, 70ns, CMOS, PDSO24 RoHS : Not Compliant | 3,036 | |||
| XQ6SLX75-2CS484C | AMD Xilinx | Field Programmable Gate Array RoHS : Not Compliant | 2,909 | |||
| XC6SLX45T-3CS484I | AMD Xilinx | Field Programmable Gate Array, 862MHz, 43661-Cell, CMOS, PBGA484 RoHS : Not Compliant | 2,628 | |||
| TDA51S485HC | Mornsun Guangzhou Science & Technology | Line Transceiver | 262 | |||
 Win Source Electronics | FBMJ3216HS480NT | TAIYO YUDEN | FERRITE BEAD 48 OHM 1206 1LN RoHS : Compliant |
| 80,000 | |
| TS4871IDT | STMicroelectronics | IC AMP AUDIO PWR 1W MONO 8SOIC RoHS : Compliant |
| 25,200 | ||
| MURS480ET3G | onsemi | DIODE GEN PURP 800V 4A SMC RoHS : Compliant |
| 15,100 | ||
| FDS4897C | Fairchild Semiconductor Corporation | Trans MOSFET N/P-CH 40V 6.2A/4.4A 8-Pin SOIC T/R / MOSFET N/P-CH 40V 8-SOIC RoHS : Compliant |
| 15,000 | ||
| FDS4897CNL | Fairchild Semiconductor Corporation |
| 14,070 | |||
| UTRS485G-S08-R | United Technologies Corporation | Schmitt trigger 4.75V~5.25V 500uA 50ns@5V,100pF SOP-8 Buffers, Drivers, Receivers, Transceivers RoHS |
| 12,483 | ||
| NTMFS4833NT1G | onsemi | MOSFET N-CH 30V 16A SO-8FL RoHS : Compliant |
| 10,500 | ||
| SIS488DN-T1-GE3 | Vishay Huntington | MOSFET N-CH 40V 40A 1212-8 / Trans MOSFET N-CH Si 40V 40A 8-Pin PowerPAK 1212 EP |
| 9,898 | ||
| BTS4880R | Infineon Technologies AG | Current Limit Switch High Side / IC HIGH SIDE PWR SWITCH DSO-36 RoHS : Compliant |
| 4,800 | ||
| BTS4880RAUMA1 | Infineon Technologies AG | IC PWR SWITCH N-CHAN 1:1 DSO-36 / Power Switch/Driver 1:1 N-Channel 625mA PG-DSO-36-12 RoHS : Compliant |
| 4,350 | ||
| FDS4897AC | Fairchild Semiconductor Corporation | MOSFET N/P-CH 40V 6.1A/5.2A 8SO RoHS : Compliant |
| 3,621 | ||
| DS485M/NOPB | Texas Instruments | IC TRANSCEIVER HALF 1/1 8SOIC / 1/1 Transceiver Half RS422, RS485 8-SOIC RoHS : Compliant |
| 2,220 | ||
| DS485MX/NOPB | Texas Instruments | IC TXRX MULTIPOINT LP 8-SOIC RoHS : Compliant |
| 2,200 | ||
| DS485MX | Texas Instruments | IC TXRX MULTIPOINT LP 8-SOIC RoHS : Not Compliant |
| 2,160 | ||
| MT29C4G48MAZBBAKS-48 IT | Micron Technology Inc | IC FLASH 4GB LPDDR 137VFBGA |
| 1,800 | ||
 Wuhan P&S | NTMS4816NR2G | onsemi | Power MOSFET 30 V, 11 A, N-Channel, SO-8 RoHS : Compliant |
| 2,500 | |
| NTMFS4834NT1G | onsemi | Power MOSFET 30 V, 130 A RoHS : Compliant |
| 1,450 |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Russian ▼ 
English
Chinese
German
Japanese
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand