 |
поискавой системы для электроныых деталей |
|
|
поискавой системы для электроныых деталей |
|
S26V1AJ-R дистрибьютор |
| дистрибьютор | номер детали | производитель | подробное описание детали | Price | Qty. BuyNow | |
 Avnet Americas | SS26-E3/52T | Vishay Intertechnologies | Schottky Rectifier, SS Series, 60 V, 2 A, Single, DO-214AA (SMB), 2 Pins, 700 mV - Tape and Reel (Alt: SS26-E3/52T) RoHS : Compliant |
| 323,250 | |
| DFLS260-7 | Diodes Incorporated | - Tape and Reel (Alt: DFLS260-7) RoHS : Compliant |
| 48,000 | ||
| SS26S-E3/5AT | Vishay Intertechnologies | - Tape and Reel (Alt: SS26S-E3/5AT) RoHS : Compliant |
| 30,000 | ||
| SS26SHE3_B/H | Vishay Intertechnologies | Diode Schottky 60V 2A 2-Pin DO-214AC T/R - Tape and Reel (Alt: SS26SHE3_B/H) RoHS : Compliant |
| 21,600 | ||
| SS26HE3_A/H | Vishay Intertechnologies | - Tape and Reel (Alt: SS26HE3_A/H) RoHS : Compliant |
| 12,000 | ||
| B72530E1140S262 | TDK Corporation | - Tape and Reel (Alt: B72530E1140S262) RoHS : Compliant |
| 12,000 | ||
| MURS260T3G | onsemi | - Tape and Reel (Alt: MURS260T3G) RoHS : Compliant |
| 5,000 | ||
ABLS2-6.000MHZ-D4Y-T | Abracon Corporation | Crystal, Surface Mount, 6 MHz, SMD, 11.4mm x 4.7mm, 30 ppm, 18 pF, 30 ppm, ABLS2 Series - Tape and Reel (Alt: ABLS2-6.000MHZ-D4Y-T) RoHS : Compliant |
| 5,000 | ||
| FDS2672 | onsemi | - Tape and Reel (Alt: FDS2672) RoHS : Compliant |
| 2,500 | ||
| TB200-05S2614 | Eaton Corporation | - Bulk (Alt: TB200-05S2614) RoHS : Compliant |
| 1,690 | ||
| ABLS2-6.144MHZ-D4Y-T | Abracon Corporation | Crystal, Microprocessor, 6.144 MHz, SMD, 11.4mm x 4.7mm x 3.3mm, 30 ppm, 18 pF, 30 ppm, ABLS2 - Tape and Reel (Alt: ABLS2-6.144MHZ-D4Y-T) RoHS : Compliant |
| 1,000 | ||
| S26KS512SDPBHI020 | Infineon Technologies AG | Flash Memory, Parallel NOR, 512 Mbit, 64M x 8bit, CFI, Parallel, 24 Pins, FBGA - Trays (Alt: S26KS512SDPBHI020) RoHS : Compliant |
| 97 | ||
| ATS-HP-D6L400S26W-134 | Advanced Thermal Solutions Inc | HIGH PERFORMANCE COPPER HEAT PIPE - ROUN - Trays (Alt: ATS-HP-D6L400S26W-134) RoHS : Compliant |
| 48 | ||
| DCM2322E72S26A0T60 | Vicor Power | - Boxed Product (Development Kits) (Alt: DCM2322E72S26A0T60) RoHS : Not Compliant |
| 10 | ||
| EVALS26HL512TTOBO1 | Infineon Technologies AG | Evaluation Board, S26HL512T, 512Mb, 3.3V, NOR Flash Memory - Boxed Product (Development Kits) (Alt: EVALS26HL512TTOBO1) RoHS : Compliant |
| 3 | ||
 Newark | APX809S-26SR-7 | Diodes Incorporated | Voltage Detector, 2.63V, -40 To 125Deg C; |Diodes Inc. APX809S-26SR-7 RoHS : Compliant |
| 2,375 | |
| APX809S-26SR-7 | Diodes Incorporated | Voltage Detector, 2.63V, -40 To 125Deg C; |Diodes Inc. APX809S-26SR-7 RoHS : Compliant |
| 2,375 | ||
| MTSW-103-24-G-S-260 | Samtec Inc | Pin Header, Mtsw-103-24-G-S-260; |Samtec, Inc. MTSW-103-24-G-S-260 RoHS : Not Compliant |
| 2,197 | ||
| MTMM-102-07-L-S-265 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 2Pos; |Samtec, Inc. MTMM-102-07-L-S-265 RoHS : Compliant |
| 2,150 | ||
| S26HL01GTFPBHI030 | Infineon Technologies AG | Flash Memory, 1Gbit, -40 To 85Deg C; |Infineon Technologies S26HL01GTFPBHI030 RoHS : Compliant |
| 1,265 | ||
| MTSW-110-08-L-S-265 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 10Pos; |Samtec, Inc. MTSW-110-08-L-S-265 RoHS : Compliant |
| 888 | ||
| MTSW-103-08-T-S-260-LL | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 3Pos; |Samtec, Inc. MTSW-103-08-T-S-260-LL RoHS : Compliant |
| 724 | ||
| MTMM-110-06-G-S-260 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 10Pos; |Samtec, Inc. MTMM-110-06-G-S-260 RoHS : Compliant |
| 558 | ||
| MTMM-114-07-S-S-265 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 14Pos; |Samtec, Inc. MTMM-114-07-S-S-265 RoHS : Compliant |
| 335 | ||
| HMTSW-109-24-T-S-266 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 9Pos; |Samtec, Inc. HMTSW-109-24-T-S-266 RoHS : Compliant |
| 261 | ||
| DWM-05-01-T-S-260 | Samtec Inc | Conn Stack Brd, 1.27Mm, 5Pos, Hdr; |Samtec, Inc. DWM-05-01-T-S-260 RoHS : Compliant |
| 251 | ||
| HW-10-16-G-S-265-SM | Samtec Inc | Conn Stack Brd, 2.54Mm, 10Pos, Hdr; |Samtec, Inc. HW-10-16-G-S-265-SM RoHS : Compliant |
| 206 | ||
| MTMM-150-05-T-S-260 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 50Pos; |Samtec, Inc. MTMM-150-05-T-S-260 RoHS : Compliant |
| 186 | ||
| MIKE2A/5M/LL1/SMAM/S/S/26 | Siretta Ltd | Antenna, Magnetic, Sma, 5M; |Siretta MIKE2A/5M/LL1/SMAM/S/S/26 RoHS : Compliant |
| 102 | ||
| HMTSW-136-22-TM-S-265-RA | Samtec Inc | Pin Header, Hmtsw-136-22-Tm-S-265-Ra; |Samtec, Inc. HMTSW-136-22-TM-S-265-RA RoHS : Compliant |
| 73 | ||
 Analog Devices Inc | MAX6315US26D1+T | Analog Devices Inc | Open-Drain SOT µP Reset Circui RoHS : Compliant |
| 76,354 | |
| MAX6315US26D3+T | Analog Devices Inc | Open-Drain SOT µP Reset Circui RoHS : Compliant |
| 34,112 | ||
| MAX6314US26D4+T | Analog Devices Inc | 68HC11/Bidirectional-Compatibl RoHS : Compliant |
| 27,500 | ||
| MAX6314US26D2+T | Analog Devices Inc | 68HC11/Bidirectional-Compatibl RoHS : Compliant |
| 13,254 | ||
| MAX6386XS26D2+T | Analog Devices Inc | SC70/µDFN, Single/Dual Low-Vol RoHS : Compliant |
| 5,420 | ||
| MAX6443US26L+ | Analog Devices Inc | µP Reset Circuits with Long Ma RoHS : Compliant | 3,012 | |||
| MAX6315US26D3+ | Analog Devices Inc | Open-Drain SOT µP Reset Circui RoHS : Compliant | 1,081 | |||
| MAX6315US26D2+T | Analog Devices Inc | Open-Drain SOT µP Reset Circui RoHS : Compliant |
| 485 | ||
| MAX6315US26D2+ | Analog Devices Inc | Open-Drain SOT µP Reset Circui RoHS : Compliant | 0 | |||
| DS26518GNB1+ | Analog Devices Inc | 8-Port T1/E1/J1 Transceiver RoHS : Compliant |
| 0 | ||
| MAX6315US26D1/GG8 | Analog Devices Inc | Open-Drain SOT uP Reset Circui RoHS : Not Compliant | 0 | |||
| MAX6386XS26D2+ | Analog Devices Inc | SC70/µDFN, Single/Dual Low-Vol RoHS : Compliant | 0 | |||
| MAX6314US26D3+ | Analog Devices Inc | 68HC11/Bidirectional-Compatibl RoHS : Compliant | 0 | |||
| MAX6423XS26+ | Analog Devices Inc | Low-Power, SC70/SOT µP Reset C RoHS : Compliant | 0 | |||
| MAX6423US26+ | Analog Devices Inc | Low-Power, SC70/SOT µP Reset C RoHS : Compliant | 0 | |||
 RS | 438625-000 (55PC0221-22-6/9CS2601) | TE Connectivity | CABLE, MULTI CONDUCTOR, 22 AWG, 19/34, 2 CONDUCTOR, 600V, ETFE, COPPER/TINNED |
| 2,200 | |
| VS-26MB100A | Vishay Intertechnologies | SINGLE-PHASE BRIDGE RECTIFIER, 1000 V, 1100 V, 25, -55 DEGC (SURFACE MOUNT) RoHS : Compliant |
| 1,147 | ||
| MS260-50.0K-1% | Caddock Electronics Inc | RESISTOR, FILM, POWER, AXIAL, 50 KILOHM, 1%, 6W, 2KV |
| 198 | ||
| BNS260-11/01ZG-ST-R (101184368) | Schmersal | SAFETY SENSOR, CODED MAGNET, 1)NO/1)NC CONTACTS, SIGNALING CONTACT, LED, RH DOOR |
| 30 | ||
| BNS260-02/01Z-ST-L (101184378) | Schmersal | SAFETY SENSOR, CODED MAGNET, 2) NC CONTACTS,1) NC SIGNALING CONTACT, LFT HND DOO |
| 11 | ||
| 2AS2-6 | Altech Corporation | 3 POSITIONS METAL PUSH BUTTON 22.5MM STRAIGHT SPRING RETURN TO CENTRE |
| 4 | ||
| 3RS26001BW30 | Siemens | TEMPERATURE MONITORING RELAY ;3RS26001BW30 |
| 4 | ||
| ICF2S26H1LDK (913700500831) | Advance by Signify | ELECTRONIC BALLAST, ICF2S42M2LDK, CFL PIN BASE 1/2 LAMP PROG START 120-277 VOL |
| 2 | ||
| BES013H (BES M05ED-PSC50F-S26G) | Balluff Inc | PROXIMITY SENSOR, BES M05ED-PSC50F-S26G |
| 2 | ||
| MIKE2A/5M/SMAM/S/S/26 (1248694) | Siretta Ltd | ANTENNA, 3G/GSM/GPRS MAGNET WHIP ANTENNA SMA-M 5M |
| 2 | ||
| ALPHA15/2.5M/SMAM/S/S/26 (8968257) | Siretta Ltd | ANTENNA, QUAD BAND GSM AND 3G PUCK ANTENNA, ADHESIVE MOUNT, 2DBI, SMA, 2.5M |
| 2 | ||
| MIKE2A/3M/LL1/SMAM/S/S/26 (1408048) | Siretta Ltd | ANTENNA, MIKE2A GSM/3G WHIP ANTENNA 3M SMA-M |
| 2 | ||
| TANGO17/5M/LL/SMAM/S/S/26 (1248710) | Siretta Ltd | ANTENNA, 3G/GSM/GPRS BELL ANTENNA IP67 SMA-M 5M |
| 2 | ||
| M3SS2-60B20 | ABB Low Voltage Products and Systems | 3POS SW MOM BLK KNOB 2-NO |
| 1 | ||
| BNS260-11/01Z-R (101184372) | Schmersal | SAFETY SENSOR, CODED MAGNET, 1)NO/1)NC CONTACTS, NC SIGNALING CONTACT, RH DOOR |
| 1 | ||
 STMicroelectronics | STS26N3LLH6 | STMicroelectronics | N-channel 30 V, 0.0038 Ohm, 26 A, SO-8 STripFET(TM) VI DeepGATE(TM) Power MOSFET RoHS : Compliant |
| 78 | |
 Microchip Technology Inc | MCP6S26-I/SL | Microchip Technology Inc | 6-Chan. 12 MHz SPI PGA, SOIC, Projected EOL: 2036-04-04 RoHS : Compliant |
| 52,175 | |
MCP6S26-I/P | Microchip Technology Inc | 6-Chan. 12 MHz SPI PGA, PDIP, Projected EOL: 2036-04-04 RoHS : Compliant |
| 5,134 | ||
MCP6S26T-I/ST | Microchip Technology Inc | 6-Chan. 12 MHz SPI PGA, TSSOP, Projected EOL: 2036-04-04 RoHS : Compliant |
| 2,500 | ||
| MCP6S26T-I/SL | Microchip Technology Inc | 6-Chan. 12 MHz SPI PGA, SOIC, Projected EOL: 2036-04-04 RoHS : Compliant |
| 1,990 | ||
| UES2603 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 861 | ||
| MCP6S26-I/ST | Microchip Technology Inc | 6-Chan. 12 MHz SPI PGA, TSSOP, Projected EOL: 2036-04-04 RoHS : Compliant |
| 362 | ||
| UES2605HR2 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 284 | ||
| UES2606HR2 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 242 | ||
| UES2606 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 79 | ||
| UES2602 | Microchip Technology Inc | UFR,FRR _ TO-3, Projected EOL: 2049-02-05 RoHS : Compliant |
| 17 | ||
| TFS265 | Microchip Technology Inc | TFS265, Projected EOL: 2050-07-31 - Contact for Pricing RoHS : Compliant | 0 | |||
| TFS261B | Microchip Technology Inc | TFS261B, Projected EOL: 2050-07-31 - Contact for Pricing | 0 | |||
| TFS2657 | Microchip Technology Inc | TFS2657, Projected EOL: 2050-07-31 - Contact for Pricing RoHS : Compliant | 0 | |||
| TFS2655B | Microchip Technology Inc | TFS2655B, Projected EOL: 2050-07-31 - Contact for Pricing RoHS : Compliant | 0 | |||
| 990-4380A-TS260 | Microchip Technology Inc | KIT, 4380A-ACDC-TS CALIBRATED, ANTENNA, LIGHTNING ARRESTOR, 60M CABLE, Projected EOL: 2051-10-06 - Contact for Pricing | 0 | |||
 Bisco Industries | S2656010-6-16 | Pilgrim Screw Corporation | 4,001 | |||
| GS 2-6 | Stimpson Company | 2,500 | ||||
| 2398-2520-S-26 | RAF Electronic Hardware | 100 | ||||
| 1010-062-SS-26 | RAF Electronic Hardware | 94 | ||||
| RABKFS2-632 | MISC. SPACERS/STANDOFFS/HANDLES | 88 | ||||
| 0214-SS-26 | RAF Electronic Hardware | 57 | ||||
| 1010-093-SS-26 | RAF Electronic Hardware | 50 | ||||
| RT-FSH2M-DS-26GT2D1Z | Raycon Technology Inc | 43 | ||||
| 6N014S2-6907 | MISCELLANEOUS | 43 | ||||
| 14004RSS2.660-12 | Accurate Screw Machine | 36 | ||||
| 0166-SSMOD316SS-26 | RAF Electronic Hardware | 33 | ||||
| 8220-1032-SS-26 | RAF Electronic Hardware | 17 | ||||
| 0165-SS-26 | RAF Electronic Hardware | 10 | ||||
| 8155-832-SS-26 | RAF Electronic Hardware | 2 | ||||
| 1179-10-SS-26 | RAF Electronic Hardware | 2 | ||||
 Rochester Electronics | A2T21S260-12SR3 | NXP Semiconductors | RF MOSFET LDMOS 65V 2.17GHz 1.2A 4L-FLG T/R RoHS : Compliant |
| 36 | |
| S26HS512TGABHI010 | Infineon Technologies AG | FLASH - NOR (SLC) 512Mbit 64M x 8 1.7V - 2V HyperBus 200MHz 5.45ns 1.7ms 24-BGA Tray RoHS : Compliant |
| 628 | ||
| S26KS512SDPBHB020 | Infineon Technologies AG | HyperFlash - NOR 512Mbit 64M x 8 1.7V - 1.95V HyperBus 166MHz 96ns 24-BGA Tray RoHS : Compliant |
| 760 | ||
| CY8C4147LQS-S265 | Infineon Technologies AG | IC MCU ARM® Cortex®-M0+ 32Bit 1 Core FLASH 128kB (128k x 8) 48MHz 64-QFN Tray RoHS : Compliant |
| 382 | ||
| S26HL01GTFPBHI030 | Infineon Technologies AG | FLASH - NOR (SLC) 1Gbit 128M x 8 2.7V - 3.6V HyperBus 166MHz 6.5ns 1.7ms 24-BGA Tray RoHS : Compliant |
| 2,482 | ||
| S26HS02GTFPBHB040 | Infineon Technologies AG | Flash, 2GX1, PBGA24 RoHS : Compliant |
| 548 | ||
| S26KS256SDPBHV020 | Cypress Semiconductor | HyperFlash - NOR 256Mbit 32M x 8 1.7V - 1.95V HyperBus 166MHz 96ns 24-BGA Tray RoHS : Compliant |
| 16 | ||
IRS2609DSPBF | International Rectifier | Half Bridge Based MOSFET Driver, 0.2A, CMOS, PDSO8 RoHS : Compliant |
| 2,908 | ||
| LM3S2620-IBZ25-A2 | Luminary Micro | RISC Microcontroller, 32-Bit, FLASH, 25MHz, CMOS, PBGA108 |
| 75 | ||
DS26522G+ | Maxim Integrated Products | Time Slot 0/16 Transceiver, PBGA144 RoHS : Compliant |
| 1 | ||
| MAX6389XS26D3 | Maxim Integrated Products | Voltage Supervisor/Reset IC, Adjustable, 1 Channel, +2.63V, BICMOS, PDSO4 RoHS : Not Compliant |
| 989 | ||
MAX6467XS26D7-T | Maxim Integrated Products | Supervisory Circuit 2.625V SOT-343 T/R RoHS : Not Compliant |
| 1,804 | ||
| MAX6468XS26D3+T | Maxim Integrated Products | Supervisory Circuit 2.625V SOT-343 T/R RoHS : Compliant |
| 9,772 | ||
| DS26LS32CN | National Semiconductor Corporation | DS26LS32 - Quad Differential Line Receivers RoHS : Not Compliant |
| 1,141 | ||
| IS26KS512S-DPBLI00 | Spansion | HyperFlash - NOR 512Mbit 64M x 8 1.7V - 1.95V HyperBus 166MHz 96ns 24-BGA T/R RoHS : Compliant |
| 12 | ||
 Sager | DWM-05-01-T-S-260 | Samtec Inc | Board to Board & Mezzanine Connectors .050 x .100 Flex Stack, Flexible Micro Board Stacker RoHS : Compliant |
| 251 | |
| DWM-06-54-L-S-265 | Samtec Inc | Board to Board & Mezzanine Connectors .050 x .100 Flex Stack, Flexible Micro Board Stacker RoHS : Compliant |
| 236 | ||
| HW-10-16-G-S-265-SM | Samtec Inc | Board to Board & Mezzanine Connectors High Temperature Flexible Board Stacking Header, 0.100 Pitch RoHS : Compliant |
| 206 | ||
| 55/4324-26-0/9-0CS2642 | TE Connectivity | Multi-Conductor Cables 55432426090CS2642 PRICE PER FOOT RoHS : Compliant |
| 0 | ||
| 55A0832-18-9/93/96CS2655 | TE Connectivity | Multi-Conductor Cables 55A08321899396CS2655 PRICE PER FOOT | 0 | |||
| 55PC0211-18-9CS2600 | TE Connectivity | Hook-up Wire 18AWG CL GP INSL600V PRICE PER FT |
| 0 | ||
| IDMS-26-D-04.00 | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| HCMS-26-01 | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| DW-10-17-T-S-260 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| DW-36-17-T-S-260 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| DW-05-15-F-S-260-003 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Board Stacking Header with Fixed Tail Length, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| HW-07-08-F-S-265-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-10-08-F-S-265-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-28-08-F-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| HW-31-08-F-S-260-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
 Coilcraft Direct | 1008HS-261TJLC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 0 | |
| 0805CS-261XJLC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| 0805CS-261XJEC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 0 | ||
 TME | ABLS-26.000MHZ-K4F-T | Abracon Corporation | Crystal; 18pF; SMD; ESR: 40Ω; 26MHz; Freq.stability: ±50ppm |
| 1,000 | |
| LS 26500 PLUS | Saft Batteries | Battery: lithium; C; 3.6V; 8500mAh; non-rechargeable; Ø26x50.4mm |
| 339 | ||
| S26 WO6 | Pneumatic Components Limited (PCL) | Quick connection coupling; straight; max.35bar; brass; D: 25mm |
| 14 | ||
| DTS26W25-44420SB-S16 | TE Connectivity | Connector: circular; Automotive; straight |
| 5 | ||
| DTS26Z15-35PA [V001] | TE Connectivity | Connector: circular; plug; Automotive; PIN: 37; straight |
| 3 | ||
| S26HS512TGABHI010 | Infineon Technologies AG | IC: FLASH memory; 512MbFLASH; HyperBus; 200MHz; 1.7÷2V; BGA24 RoHS : Compliant |
| 0 | ||
| S26KS512SDPBHB020 | Infineon Technologies AG | IC: FLASH memory; 512MbFLASH; HyperBus; 166MHz; 1.7÷1.95V; FBGA24 RoHS : Compliant |
| 0 | ||
| HF32FA/012-ZS2(610) | Xiamen Hongfa Electroacoustic Co.,Ltd. | Relay: electromagnetic; Ucoil: 12VDC; SPDT; 3A/250VAC; 3A/30VDC |
| 0 | ||
| CY8C4147LQS-S265 | Infineon Technologies AG | IC: microcontroller RoHS : Compliant |
| 0 | ||
| APX809S-26SR-7 | Diodes Incorporated | IC: supervisor circuit; power on reset monitor (PoR); push-pull RoHS : Compliant |
| 0 | ||
| S26HL01GTFPBHI030 | Infineon Technologies AG | IC: FLASH memory; 1GbFLASH; HyperBus; 166MHz; 2.7÷3.6V; BGA24 RoHS : Compliant |
| 0 | ||
| S26KS256SDPBHV020 | Infineon Technologies AG | IC: FLASH memory; 256MbFLASH; HyperBus; 166MHz; 1.7÷1.95V; FBGA24 RoHS : Compliant |
| 0 | ||
| PTNS2-6020M-B100 | Same Sky | Potentiometer: slide; 100kΩ; 250mW; THT; ±20%; linear; metal; carbon |
| 0 | ||
| B72580E1140S262 | TDK Corporation | Varistor: ceramics; SMD; 1812; 14VAC; 16VDC; 2.4J; 800A; 24.5V; 5.6nF RoHS : Compliant |
| 0 | ||
| ATBS-263-0405 | Amphenol Corporation | Connector: automotive; Automotive RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | MAX6314US26D1+T | Analog Devices Inc | Supervisory Circuits / Reset Circuit 2.63V 1V to 5.5V 4-Pin(3+Tab) SOT-14 RoHS : Compliant | 37,377 | ||
PTVS26VS1UR,115 | Nexperia | PTVS Series 400 W 42.1 V Uni-Directional Transient Voltage Suppressor - SOD-123W RoHS : Compliant | 21,215 | |||
| MAX6314US26D2+T | Analog Devices Inc | IC RESET CIRCUIT 2.63V SOT143-4 RoHS : Compliant | 14,999 | |||
| MAX6387XS26D3+T | Analog Devices Inc | IC MPU/RESET CIRC 2.63V SC70-4 RoHS : Compliant | 7,500 | |||
| VS26VUA1LAMTFTR | ROHM Semiconductor | 瞬态电压抑制器（AEC-Q101标准） RoHS : Compliant |
| 7,200 | ||
| VS26VUA1LAMTR | ROHM Semiconductor | 瞬态电压抑制器 RoHS : Compliant |
| 6,100 | ||
| MAX6805US26D3+ | Analog Devices Inc | RoHS : Compliant | 3,861 | |||
| MAX6443US26L+ | Analog Devices Inc | RoHS : Compliant | 3,012 | |||
| MAX6386XS26D3+ | Analog Devices Inc | RoHS : Compliant | 2,450 | |||
PTVS26VU1UPAZ | Nexperia | TVS DIODE 26V 42.1V DFN2020-3 RoHS : Compliant | 1,187 | |||
DS26LS31CM/NOPB | Texas Instruments | RoHS : Compliant | 768 | |||
TPS26632RGER | Texas Instruments | RoHS : Compliant | 405 | |||
SNJ54LS266J | Texas Instruments | RoHS : Not Compliant | 250 | |||
| VS26VUA1VWMTFTR | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
| VS26VUA1LBTBR1 | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
 ComSIT USA | S263689C04 | SUNTECH CIRCUITS | AVAILABLE EU | 735 | ||
ComSIT USA | SS26-E3/52T | Vishay Intertechnologies | SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Rectifier Diode, Schottky, 1 Phase, 1 Element, 2A, 60V V(RRM), Silicon, DO-214AA RoHS : Compliant | 26,250 | ||
| DS26C31TM | National Semiconductor Corporation | CMOS QUAD TRI-STATE DIFFERENTIAL LINE DRIVER Line Driver, 4 Func, 4 Driver, CMOS, PDSO16 RoHS : Not Compliant | 1,471 | |||
| LYS260DOGEG | OSRAM GmbH | DIFFUSED, SOT-23 LED Single Color LED, Yellow, Diffused, 2.9mm RoHS : Not Compliant | 1,330 | |||
| KOZRBS2617 | Kaco New Energy | Electronic Component RoHS : Not Compliant | 1,169 | |||
| SS26E352T | Vishay Intertechnologies | SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER Rectifier Diode, Schottky, 1 Phase, 1 Element, 2A, 60V V(RRM), Silicon, DO-214AA RoHS : Compliant | 915 | |||
| LYS260DO | OSRAM GmbH | DIFFUSED, SOT-23 LED Single Color LED, Yellow, Diffused, 2.9mm RoHS : Not Compliant | 640 | |||
| DS26LS32CNNOPB | National Semiconductor Corporation | QUAD DIFFERENTIAL LINE RECEIVER Line Receiver, 4 Func, 4 Rcvr, BIPolar, PDIP16 RoHS : Compliant | 170 | |||
| DS26LS32ACN | National Semiconductor Corporation | QUAD DIFFERENTIAL LINE RECEIVER Line Receiver, 4 Func, 4 Rcvr, PDIP16 RoHS : Not Compliant | 119 | |||
| DV8526515S2600RA | dev | Electronic Component RoHS : Compliant | 88 | |||
| DS26LS32CN | National Semiconductor Corporation | QUAD DIFFERENTIAL LINE RECEIVER Line Receiver, 4 Func, 4 Rcvr, PDIP16 RoHS : Not Compliant | 86 | |||
| S26361F5110V126 | FUJITSU Limited | Electronic assembly for data-processing machines, Fujitsu RoHS : Not Compliant | 42 | |||
| DS26C31MJ883 | National Semiconductor Corporation | CMOS QUAD TRI-STATE DIFFERENTIAL LINE DRIVER Line Driver, 4 Func, 4 Driver, CMOS, CDIP16 RoHS : Not Compliant | 39 | |||
| DS26C32ATM | National Semiconductor Corporation | QUAD DIFFERENTIAL LINE RECEIVER Line Receiver, 4 Func, 4 Rcvr, CMOS, PDSO16 RoHS : Not Compliant | 36 | |||
| DS26C31MJ883Q | National Semiconductor Corporation | CMOS QUAD TRI-STATE DIFFERENTIAL LINE DRIVER Line Driver, 4 Func, 4 Driver, CMOS, CDIP16 RoHS : Not Compliant | 25 | |||
| VS26MB10A | International Rectifier | Bridge Rectifier Diode, 1 Phase, 25A, 100V V(RRM), Silicon RoHS : Compliant | 18 | |||
 GLYN GmbH & Co. KG | P0840VGF1MA00-CS-26134 | Tianma Micro-electronics Co | TFT 8.40", 640x480, IPS, 900cd, RGB (TTL) | 100 | ||
 Interstate Connecting Components | 970-001MT24-2S2-6 | Glenair Inc | POWERTRIP CONNECTORS | 0 | ||
| 44A9436-24-9/96CS2621 | TE Connectivity | RoHS : Compliant |
| 0 | ||
| 55A0812-10-96CS2654 | TE Connectivity | 55A0812-10-96CS2654 RoHS : Compliant | 0 | |||
| 55A0832-12-9/93/96CS26 | TE Connectivity | 55A0832-12-9/93/96CS2655 | 0 | |||
| 55PC0211-18-9CS2600 | TE Connectivity | 55PC0211-18-9CS2600 | 0 | |||
| DTS 26 F 17-06 PN | TE Connectivity | DTS 26 F 17-06 PN | 0 | |||
| DTS 26 F 19-32 PA | TE Connectivity | DTS 26 F 19-32 PA | 0 | |||
| DTS 26 K 17-08 SN | TE Connectivity | DTS 26 K 17-08 SN | 0 | |||
| DTS 26 K 17-35 BA | TE Connectivity | DTS 26 K 17-35 BA | 0 | |||
| DTS 26 S 21-41 SN | TE Connectivity | DTS 26 S 21-41 SN | 0 | |||
| DTS 26 W 09-35 PB | TE Connectivity | DTS 26 W 09-35 PB | 0 | |||
| DTS 26 W 13-35 SN | TE Connectivity | DTS 26 W 13-35 SN | 0 | |||
| DTS 26 W 17-06 PA | TE Connectivity | DTS 26 W 17-06 PA | 0 | |||
| DTS 26 W 25-61 SN | TE Connectivity | DTS 26 W 25-61 SN | 0 | |||
| DTS26F11-98SA V001 | TE Connectivity | PLUG ASSY | 0 | |||
 NexGen Digital | TGS2612-D01 | FIGARO Engineering Inc | 260,850 | |||
| TPS26400PWPR | Texas Instruments | RoHS : Compliant | 83,476 | |||
| DS26514GN+ | Analog Devices Inc | RoHS : Compliant | 900 | |||
PTVS26VZ1USKYL | Nexperia | RoHS : Compliant | 779 | |||
| SN74LS26N | Motorola Semiconductor Products | RoHS : Not Compliant | 200 | |||
| DS26LS32ACN | National Semiconductor Corporation | RoHS : Not Compliant | 108 | |||
| MURS260T3G | onsemi | RoHS : Compliant | 17 | |||
| TKS2606CT-ND | TOKO Inc | 8 | ||||
 PEI Genesis | 8D513S26PB | SOURIAU-SUNBANK | RoHS : Unknown |
| 0 | |
| 8D517S26SE | SOURIAU-SUNBANK | RoHS : Unknown |
| 0 | ||
| S2649-1816A1.5-34R | SOURIAU-SUNBANK |
| 0 | |||
| S2678-12 | SOURIAU-SUNBANK |
| 0 | |||
| S2696-18-34 | SOURIAU-SUNBANK |
| 0 | |||
| GRA.1S.269.GN | LEMO connectors |
| 0 | |||
| GRA.1S.269.GM | LEMO connectors |
| 0 | |||
| S2613-0030 | SOURIAU-SUNBANK |
| 0 | |||
| S2647-12C | SOURIAU-SUNBANK |
| 0 | |||
| S2647-15 | SOURIAU-SUNBANK |
| 0 | |||
| S2900AS2608LNS034-000 | SOURIAU-SUNBANK |
| 0 | |||
| 8D517S26PB | SOURIAU-SUNBANK | RoHS : Unknown |
| 0 | ||
| 8D017S26PN | SOURIAU-SUNBANK |
| 0 | |||
| 8D717S26SN | SOURIAU-SUNBANK | RoHS : Unknown |
| 0 | ||
| S2630A1807-34 | SOURIAU-SUNBANK |
| 0 | |||
 Powell Electronics | 55A0812-10-96CS2654 | TE Connectivity | Connectors RoHS : Compliant |
| 18,817 | |
| MTMM-102-07-L-S-265 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 1,419 | ||
| MTSW-103-08-T-S-260-LL | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 478 | ||
| MTMM-109-05-G-S-265 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 368 | ||
| MTMM-110-06-G-S-260 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 368 | ||
| HMTSW-105-22-T-S-265 | Samtec Inc | Board-to-Board Connector, High-Speed, Me RoHS : Compliant |
| 226 | ||
| MTMM-114-07-S-S-265 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 221 | ||
| HMTSW-109-24-T-S-266 | Samtec Inc | .100" High-Temp Variable Post Height Ter RoHS : Compliant |
| 172 | ||
| DWM-05-01-T-S-260 | Samtec Inc | .050" x .100" Flex Stack, Flexible Micro RoHS : Compliant |
| 166 | ||
| DWM-06-54-L-S-265 | Samtec Inc | .050" x .100" Flex Stack, Flexible Micro RoHS : Compliant |
| 156 | ||
| HW-10-16-G-S-265-SM | Samtec Inc | High Temperature Flexible Board Stacking RoHS : Compliant |
| 136 | ||
| MTMM-150-05-T-S-260 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 123 | ||
| MS-262-009-445-220S-905 | AirBorn a molex company | Right Angle Plated Thru Hole PCB Metal C |
| 110 | ||
| HMTSW-136-22-TM-S-265-RA | Samtec Inc | .100" High-Temp Variable Post Height Ter RoHS : Compliant |
| 48 | ||
| DTS26W25-44420SA-S04 | TE Connectivity | DTS CONNECTOR SPECIAL INSERT |
| 22 | ||
 PUI | SS26-HF | 25,000 | ||||
| 2211-1X06G00S/2.6/2.8B | 1,113 | |||||
| 2211-1X04G00S-2.6-2.8B | 499 | |||||
| 2211-2X40G00S-2.6-2.8B | 333 | |||||
| 2211-1X01G00S-2.6-2.8 | 200 | |||||
| 2011-2X03G00S-2.6-10.9B-I | 200 | |||||
| 2211-1X09G00S-2.6-2.8B | 153 | |||||
| 2211-1X07G00S/2.6/2.8B | 34 | |||||
 Richardson RFPD | RTX-2520DD31-S-26.000-TR | Raltron Electronics Corporation | OSC TCXO/VCTCXO RoHS : Compliant | 0 | ||
| ATS-HP-F6L150S26W-241 | Advanced Thermal Solutions Inc | Thrml Mgmt Access Flat Heat Pipe Copper Alloy RoHS : Compliant |
| 0 | ||
| CMLV12S26-150 | Wall Industries Inc | DCTODC CONVERTR MOD | 0 | |||
| MURS260T3G | onsemi | Rectifier Diode Switching 600V 2A 75ns 2-Pin SMB T RoHS : Compliant | 0 | |||
| FB48S26-300TH | Wall Industries Inc | DCTODC CONVERTR MOD | 0 | |||
LV12S26-150 | Wall Industries Inc | Low Voltage DC-DC Converter 10-36 Vdc Input 26Vdc RoHS : Compliant | 0 | |||
| HFSMAMST-13S26-HFSMAMST-36 | Acuity Brands Lighting Inc | RFTEST CABLE ASSY RoHS : Compliant | 0 | |||
| CMLV12S26-150TH | Wall Industries Inc | DCTODC CONVERTR MOD | 0 | |||
| CCR-38S260 | Teledyne Relays | RF Switch 0MHz to 18GHz 60dB RoHS : Compliant |
| 0 | ||
| ATS260BSM-1E | CTS Corporation | Crystal 26MHz ±30ppm (Tol) ±50ppm (Stability) 18pF RoHS : Compliant |
| 0 | ||
| RTV-2016AF31O-S-26.000-TR | Raltron Electronics Corporation | Temperature Compensated Crystal Oscillator RoHS : Compliant | 0 | |||
| LV12S26-150TH | Wall Industries Inc | Half-Brick DC/Dc Converters RoHS : Not Compliant | 0 | |||
| RTX-2520AD31-S-26.000-TR | Raltron Electronics Corporation | RTX-2520AD31-S-26.000-TR RoHS : Compliant | 0 | |||
| CCR-58S26C | Teledyne Relays | RF Switch 0MHz to 26.5GHz 50dB RoHS : Compliant |
| 0 | ||
| 3P5MST-13S26-3P5FST-36 | Acuity Brands Lighting Inc | RFTEST CABLE ASSY RoHS : Compliant | 0 | |||
 Rutronik | SS26-E3/52T | Vishay Intertechnologies | SCHOTTKY-DIODE 2A 60V SMB RoHS : Compliant |
| 51,000 | |
| SISS26LDN-T1-UE3 | Vishay Intertechnologies | N-CH 60V 81.2A 3.4mOhm PPAK1212-8S RoHS : Compliant |
| 6,000 | ||
| SS26S-E3/61T | Vishay Intertechnologies | SCHOTTKY-DIODE 2A 60V SMA RoHS : Compliant |
| 3,600 | ||
| SM8S26AHM3/I | Vishay Intertechnologies | TRANSIL AUTO 0,008KW 26V DO218AC RoHS : Compliant |
| 750 | ||
| IAUS260N10S5N019TATMA1 | Infineon Technologies AG | N-CH 100V 260A 1,6mOhm TOLT RoHS : Compliant |
| 19 | ||
 Chip 1 Exchange | SS26HE3_A/H | Vishay Intertechnologies | INSTOCK RoHS : Compliant | 117,000 | ||
| LYS260-DO | INSTOCK | 50,774 | ||||
| MAX6390XS26D7+T | Maxim Integrated Products | INSTOCK RoHS : Compliant | 17,350 | |||
| B72500T1140S260 | INSTOCK | 10,034 | ||||
MAX6315US26D3+ | Maxim Integrated Products | INSTOCK RoHS : Compliant | 5,880 | |||
| MPZ1608S260ATDH5 | TDK Corporation | INSTOCK RoHS : Compliant | 911 | |||
| MKS2670-6-0 | STOCK | INSTOCK | 775 | |||
| MKS2660-6-0-1010 | INSTOCK | 663 | ||||
| 74LS26LYDP | Texas Instruments | INSTOCK | 260 | |||
| DS26C32ATM | INSTOCK | 146 | ||||
| S26B-PHDSS | JST Manufacturing | INSTOCK RoHS : Compliant | 100 | |||
| DS26C32AMJ/883 | INSTOCK | 63 | ||||
| DM74LS26M | National Semiconductor Corporation | INSTOCK RoHS : Not Compliant | 50 | |||
| DM74LS26M | INSTOCK | 50 | ||||
| MS26574-2-1/2 | INSTOCK | 3 | ||||
 Avnet Abacus | B72510E1140S262 | TDK Corporation | (Alt: B72510E1140S262) RoHS : Compliant | 72,000 | ||
| MPZ1608S260ATDH5 | TDK Corporation | Ferrite Bead 0603 1608 Metric 26 ohm 6 A MPZ Series 0007 ohm 25 (Alt: MPZ1608S260ATDH5) RoHS : Compliant | 16,000 | |||
| B82725S2602N41 | TDK Corporation | (Alt: B82725S2602N041) RoHS : Compliant | 10,000 | |||
| ABLS2-6.000MHZ-D4Y-T | Abracon Corporation | Crystal Surface Mount 6 MHz SMD 114mm x 47mm 30 ppm 18 pF 30 ppm ABLS2 Series - Tape and Reel (Alt: ABLS2-6.000MHZ-D4Y-T) RoHS : Compliant | 3,000 | |||
| B72220S2681K101 | TDK Corporation | (Alt: B72220S2681K101) RoHS : Compliant | 2,000 | |||
| 10090929-S264XLF | Amphenol Corporation | D Sub Connector High Density Receptacle FCI 10090929 Series 26 Contacts DA Solder (Alt: 10090929-S264XLF) RoHS : Compliant | 1,540 | |||
| ECS-260-10-33B-CKM-TR | ECS International Inc | - Tape and Reel (Alt: ECS-260-10-33B-CKM-TR) RoHS : Compliant | 1,000 | |||
| CAS26C151JAGFC | KEMET Corporation | Ceramic Suppression Capacitor 150 pF 5 X1 Y2 250 VAC 250 VAC 2211 5728 Metric (Alt: CAS26C151JAGFC) RoHS : Compliant | 0 | |||
| CAS26C391JAGFC | KEMET Corporation | Ceramic Suppression Capacitor 390 pF 5 X1 Y2 250 VAC 250 VAC 2211 5728 Metric (Alt: CAS26C391JAGFC) RoHS : Compliant | 0 | |||
| B72314S2621K101 | TDK Corporation | B72314S2621K101 (Alt: B72314S2621K101) RoHS : Not Compliant | 0 | |||
| B72580E1140S262 | TDK Corporation | (Alt: B72580E1140S262) RoHS : Compliant | 0 | |||
| MTLW-140-08-T-S-269 | Samtec Inc | Pin Header BoardtoBoard 254 mm 1 Rows 40 Contacts Through Hole MTLW Series (Alt: MTLW-140-08-T-S-269) RoHS : Compliant | 0 | |||
| ABLS-26.000MHZ-K4F-T | Abracon Corporation | - Tape and Reel (Alt: ABLS-26.000MHZ-K4F-T) RoHS : Compliant | 0 | |||
| ECS-260-12-37-CKM-TR | ECS International Inc | Crystal Standard 26 MHz SMD 2mm x 16mm x 045mm 10 ppm 12 pF 10 ppm ECX1637 - Tape and Reel (Alt: ECS-260-12-37-CKM-TR) RoHS : Compliant | 0 | |||
| ECS-260-18-37-AGM-TR | ECS International Inc | Crystal Standard 26 MHz SMD 2mm x 16mm x 045mm 30 ppm 18 pF 25 ppm ECX1637 - Tape and Reel (Alt: ECS-260-18-37-AGM-TR) RoHS : Compliant | 0 | |||
Avnet Asia | PB5615-S26 | PanJit Semiconductor | (Alt: PB5615-S26) RoHS : Compliant |
| 3,000 | |
| MPZ1608S260ATDH5 | TDK Corporation | Ferrite Bead, 0603 [1608 Metric], 26 ohm, 6 A, MPZ Series, 0.007 ohm, ? 25% (Alt: MPZ1608S260ATDH5) RoHS : Compliant | 0 | |||
| SS26HE3_A/H | Vishay Intertechnologies | (Alt: SS26HE3_A/H) RoHS : Compliant | 0 | |||
| MURS260T3G | onsemi | (Alt: MURS260T3G) RoHS : Compliant | 0 | |||
| PTVS26VU1UPAZ | Nexperia | TVS Diode, PTVSxU1UPA Series, Unidirectional, 26 V, 43.5 V, DFN2020, 3 Pins (Alt: PTVS26VU1UPAZ) RoHS : Compliant | 0 | |||
| ABLS2-6.000MHZ-D4Y-T | Abracon Corporation | Crystal, Surface Mount, 6 MHz, SMD, 11.4mm x 4.7mm, 30 ppm, 18 pF, 30 ppm, ABLS2 Series (Alt: ABLS2-6.000MHZ-D4Y-T) RoHS : Compliant | 0 | |||
| SS26SHE3_B/I | Vishay Intertechnologies | (Alt: SS26SHE3_B/I) RoHS : Compliant | 0 | |||
| SS26-E3/52T | Vishay Intertechnologies | Schottky Rectifier, SS Series, 60 V, 2 A, Single, DO-214AA (SMB), 2 Pins, 700 mV (Alt: SS26-E3/52T) RoHS : Compliant | 0 | |||
| SS26SHE3_B/H | Vishay Intertechnologies | Diode Schottky 60V 2A 2-Pin DO-214AC T/R (Alt: SS26SHE3_B/H) RoHS : Compliant | 0 | |||
| SS26H | Taiwan Semiconductor | Diode Schottky 60V 2A 2-Pin DO-214AA T/R (Alt: SS26H) RoHS : Compliant | 0 | |||
| SS26HM3_A/H | Vishay Intertechnologies | Diode Schottky 2A 2-Pin DO-214AA T/R (Alt: SS26HM3_A/H) RoHS : Compliant | 0 | |||
| CAS26C101KAGFC | KEMET Corporation | (Alt: CAS26C101KAGFC) RoHS : Compliant |
| 0 | ||
| MPZ1608S260ATAH0 | TDK Corporation | (Alt: MPZ1608S260ATAH0) RoHS : Compliant | 0 | |||
| PTVS26VZ1USKYL | Nexperia | (Alt: PTVS26VZ1USKYL) RoHS : Compliant | 0 | |||
| 19-217/GHC-YR1S2/6T | Everlight Electronics Co Ltd | EVL19-217/GHC-YR1S2/6T 0603 PACKAGE CHIP (Alt: 19-217/GHC-YR1S2/6T) RoHS : Compliant | 0 | |||
 Avnet Silica | MURS260T3G | onsemi | Power Rectifier UltraFast Recovery 2 A 600 V (Alt: MURS260T3G) RoHS : Compliant | 130,000 | ||
| MBRS260T3G | onsemi | Schottky Rectifier 60 V 2 A Single DO214AA SMB 2 Pins 630 mV (Alt: MBRS260T3G) RoHS : Compliant | 90,000 | |||
| DFLS260-7 | Diodes Incorporated | Schottky Rectifier 60 V 2 A Single PowerDI 123 2 Pins 620 mV (Alt: DFLS260-7) RoHS : Compliant | 54,000 | |||
| APX809S-26SR-7 | Diodes Incorporated | Voltage Detector 1 Monitor 26 V ActiveLowPushPull 1 V to 55 V SOT233 (Alt: APX809S-26SR-7) RoHS : Compliant | 3,000 | |||
| APX810S-26SR-7 | Diodes Incorporated | Reset Generator SOT23 TR 3K (Alt: APX810S-26SR-7) RoHS : Compliant | 3,000 | |||
| APX803S-26SR-7 | Diodes Incorporated | Reset Generator SOT23 TR 3K (Alt: APX803S-26SR-7) RoHS : Compliant | 3,000 | |||
| SS26T3G | onsemi | Schottky Rectifier 60 V 2 A Single DO214AA SMB 2 Pins 630 mV (Alt: SS26T3G) RoHS : Compliant | 2,500 | |||
| MFS2630AMBA0AD | NXP Semiconductors | (Alt: MFS2630AMBA0AD) RoHS : Compliant | 1,000 | |||
| MFS2613HMDHKAD | NXP Semiconductors | EFS26 (Alt: MFS2613HMDHKAD) RoHS : Compliant | 500 | |||
| MFS2633HMDAKAD | NXP Semiconductors | EFS26 (Alt: MFS2633HMDAKAD) RoHS : Compliant | 250 | |||
| MFS2633AMDA0AD | NXP Semiconductors | (Alt: MFS2633AMDA0AD) RoHS : Compliant | 250 | |||
| MFS2613AMDA2AD | NXP Semiconductors | (Alt: MFS2613AMDA2AD) RoHS : Compliant | 0 | |||
| MFS2611AMDA0AD | NXP Semiconductors | System Basis Chip 32 V to 40 V SPI 48 Pins LQFPEP (Alt: MFS2611AMDA0AD) RoHS : Compliant | 0 | |||
| MFS2600AMDA0AD | NXP Semiconductors | (Alt: MFS2600AMDA0AD) RoHS : Compliant | 0 | |||
| MFS2602AMBA0ADR2 | NXP Semiconductors | AUTO SBC (Alt: MFS2602AMBA0ADR2) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | ABLS-26.000MHZ-K4F-T | Abracon Corporation | CRYSTAL 26.0000MHZ 18PF SMD |
| 0 | |
| AMMLPABLRS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPVAVJS-26.0000T | Abracon Corporation |
| 0 | |||
| ABLS-26.000MHZ-D7G-F-T | Abracon Corporation | CRYSTAL 26.0000MHZ 18PF SMD RoHS : Compliant |
| 0 | ||
| AMMLPVBXJS-26.0000T | Abracon Corporation |
| 0 | |||
| ABLS2-6.000MHZ-D4Y-T | Abracon Corporation | CRYSTAL 6.0000MHZ 18PF SMD RoHS : Compliant |
| 0 | ||
| AMMLPFLBVJS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPVAXCS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPABLCS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPDBLRS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPVAVCS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPAALRS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPEALRS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPVBVRS-26.0000T | Abracon Corporation |
| 0 | |||
| AMMLPEBVRS-26.0000T | Abracon Corporation |
| 0 | |||
 Chip-Germany GmbH | SS26-0B00-02 | Broadcom Limited | 10,000 | |||
| S26KS256SDPBHB020 | 5,000 | |||||
| S26KS256SDPBHV023 | 5,000 | |||||
| MAX6314US26D4 | Maxim Integrated Products | 10 | ||||
 Component Electronics, Inc | ABLS2-6.000MHZ-D4Y-T | Abracon Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 5,361 | |
| LYS260-DO | OSRAM GmbH | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2,760 | ||
| DS26C32ATM | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 714 | ||
| S26B-PHDSS | JST Manufacturing | IN STOCK SHIP TODAY RoHS : Compliant |
| 380 | ||
| DS26C31TM | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 65 | ||
| CGS262T350X5C3PL | Mallory Sonalert Products Inc | IN STOCK SHIP TODAY |
| 60 | ||
| SM20WL-3S26 | SOURIAU-SUNBANK | IN STOCK SHIP TODAY |
| 53 | ||
| BS-26 | bimed | IN STOCK SHIP TODAY |
| 50 | ||
| DS26LS32ACN | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 34 | ||
| BS2620PH-24-C | Intervox | IN STOCK SHIP TODAY |
| 25 | ||
| DS26LS32CN | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 24 | ||
| N74LS266N | Signetics | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 12 | ||
| DM74LS26N | National Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant | 4 | |||
| HFS26R129N | Thomas & Betts | IN STOCK SHIP TODAY RoHS : Unknown | 4 | |||
| 74LS260PC | Fairchild Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 2 | ||
 DB Roberts | 8976-SS-26 | RAF Electronic Hardware | 0 | |||
| 7107-SS-26 | RAF Electronic Hardware | 0 | ||||
| 8191-1032-SS-26 | RAF Electronic Hardware | 5/16 RND INTRNL THRD HAND | 0 | |||
| 7014-SS-26 | RAF Electronic Hardware | 0 | ||||
| 8342-832-SS-26 | RAF Electronic Hardware | OVAL INTRL THREAD HANDLES BLK 7/16 X 9/32 OV X 4.00 LG X 1- | 0 | |||
| 8610-3124-S-26 | RAF Electronic Hardware | 0 | ||||
| 8792-3724-SS-26 | RAF Electronic Hardware | 0 | ||||
| 8255-632-S-26 | RAF Electronic Hardware | 0 | ||||
| 1029-125-SS-26 | RAF Electronic Hardware | 0 | ||||
| 7121-SS-26 | RAF Electronic Hardware | 0 | ||||
| 1018-125-SS-26 | RAF Electronic Hardware | 0 | ||||
| 8158-832-S-26 | RAF Electronic Hardware | 0 | ||||
| 8182-832-SS-26 | RAF Electronic Hardware | 0 | ||||
| 8580-2528-SS-26 | RAF Electronic Hardware | 0 | ||||
| 8280-1032-SS-26 | RAF Electronic Hardware | 0 | ||||
 EBV Elektronik | SS26-E3/52T | Vishay Intertechnologies | 2A 60V SMB SM SCHOTTKY RECT (Alt: SS26-E3/52T) RoHS : Compliant | 445,500 | ||
| 19-217/GHC-YR1S2/6T | Everlight Electronics Co Ltd | (Alt: S10B017470) RoHS : Compliant | 18,000 | |||
| SS26SHE3_B/H | Vishay Intertechnologies | Diode Schottky 60V 2A 2Pin DO214AC TR (Alt: SS26SHE3_B/H) RoHS : Compliant | 16,200 | |||
| SS26T3G | onsemi | Schottky Rectifier 60 V 2 A Single DO214AA SMB 2 Pins 630 mV (Alt: SS26T3G) RoHS : Compliant | 12,500 | |||
| SS26H | Taiwan Semiconductor | Diode Schottky 60V 2A 2Pin DO214AA TR (Alt: SS26H) RoHS : Compliant | 9,000 | |||
| TSSS2600 | Vishay Intertechnologies | (Alt: TSSS2600) RoHS : Compliant | 5,000 | |||
| MBRS260T3G | onsemi | Schottky Rectifier 60 V 2 A Single DO214AA SMB 2 Pins 630 mV (Alt: MBRS260T3G) RoHS : Compliant | 2,500 | |||
| CY8C4746LQS-S263 | Infineon Technologies AG | MCU 32Bit CY8C4746 ARM CortexM0 RISC 64KB Flash 171V to 55V 40Pin QFN Tray (Alt: SP005650575) RoHS : Compliant | 2,450 | |||
| S26KS256SDPBHI020 | Infineon Technologies AG | (Alt: SP005653893) RoHS : Compliant | 1,690 | |||
| S26HS512TGABHB000 | Infineon Technologies AG | NOR Flash 512Mbit 64M X 8bit SPI 18V 9ns 24Pin BGA Tray (Alt: SP005655835) RoHS : Compliant | 338 | |||
| MFS2630AMDA0AD | NXP Semiconductors | (Alt: MFS2630AMDA0AD) RoHS : Compliant | 250 | |||
| S2-60BW1 | SIMCom | RF Components (Alt: S2-60BW1) RoHS : Compliant | 0 | |||
| PFS2620HMDA0AD | NXP Semiconductors | System Basis Chip (Alt: PFS2620HMDA0AD) RoHS : Compliant | 0 | |||
| S26HS01GTFPBHI030 | Infineon Technologies AG | (Alt: SP005655127) RoHS : Compliant | 0 | |||
| S26HS512TGABHI010 | Infineon Technologies AG | NOR Flash 512Mbit 64M X 8bit SPI 18V 8ns 24Pin BGA Tray (Alt: SP005655859) RoHS : Compliant | 0 | |||
 FDH Electronics | DTS26F21-35BC | TE Connectivity | Connector |
| 214 | |
| DTS26F25-19PC | TE Connectivity | Connector |
| 71 | ||
| DTS26F25-19PC-LC | TE Connectivity | Connector |
| 71 | ||
| DTS26T09-98SE-LC | TE Connectivity | Connector |
| 61 | ||
| DTS26T23-35PE | TE Connectivity | Connector RoHS : Compliant |
| 43 | ||
| DTS26T11-98PE-LC | TE Connectivity | Connector |
| 26 | ||
| DTS26T11-99SE | TE Connectivity | Connector RoHS : Compliant |
| 26 | ||
| DTS26T15-19SE-LC | TE Connectivity | Connector |
| 20 | ||
| DTS26F19-35SE-LC | TE Connectivity | Connector |
| 2 | ||
| DTS26F21-35PE-LC | TE Connectivity | Connector |
| 2 | ||
| DTS26F15-05BE | TE Connectivity | Connector |
| 1 | ||
| DTS26F15-19SE-LC | TE Connectivity | Connector |
| 1 | ||
| DTS26F15-35SE | TE Connectivity | Connector |
| 1 | ||
| DTS26T19-35SE-LC | TE Connectivity | Connector |
| 1 | ||
| S2678-12 | SOURIAU-SUNBANK | Connector Acc | 0 | |||
 Flip Electronics | S26KL256SDABHI020 | Infineon Technologies AG | Stock RoHS : Compliant | 22,308 | ||
| S26KS256SDPBHV020 | Cypress Semiconductor | Stock, Ship Today RoHS : Compliant |
| 3,693 | ||
| S26KL512SDABHN033 | Cypress Semiconductor | Stock | 2,650 | |||
| S26KL512SDABHA033 | Cypress Semiconductor | Stock | 2,650 | |||
| S26HL512TFPBHV013 | Infineon Technologies AG | Stock RoHS : Compliant | 2,500 | |||
| S26HL512TFPBHI003 | Infineon Technologies AG | Stock RoHS : Compliant | 2,500 | |||
| S26KS512SDGBHI030 | Cypress Semiconductor | Stock, Ship Today RoHS : Compliant |
| 2,011 | ||
| S26HS512TGABHI010 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 1,820 | ||
| S26KL128SDABHN023 | Cypress Semiconductor | Stock | 967 | |||
| S26KL128SDABHI023 | Cypress Semiconductor | Stock | 574 | |||
| S26HS512TGABHV010 | Infineon Technologies AG | Stock RoHS : Compliant | 338 | |||
| S26HL512TFPBHV000 | Infineon Technologies AG | Stock RoHS : Compliant | 338 | |||
| S26KL256SDABHN033 | Cypress Semiconductor | Stock | 328 | |||
| S26KS512SDPBHB020 | Infineon Technologies AG | Stock, Ship Today RoHS : Compliant |
| 190 | ||
| S26KS512SDPBHI020 | Infineon Technologies AG | Stock RoHS : Compliant | 190 | |||
 Maritex | HL-PYT-1005S26YC-04 | Hongli Zhihui Group Co LTD | LED SMD; case 0402; amber; 586-595nm; 35-50mcd/5mA; 1.7-2.3V; water clear lens; 130 degrees; 1.0x0.5x0.4mm /6000 |
| 29,900 | |
| FPV160808S260PKT | Fenghua (HK) Electronics Ltd | Varistor SMD; 0603; 26VDC; 25pF RoHS : Compliant |
| 3,860 | ||
| TGS2610-C00 | FIGARO Engineering Inc | MOS-type propane, butane gas sensor; range: 1-25%LEL; supply: 5V; power: 280mW |
| 2,384 | ||
| SS26FL | onsemi | Rectifier Diodes & Bridges; SS26FL; ON SEMICONDUCTOR; 2 A; 60 V RoHS : Compliant |
| 2,374 | ||
DS26C32ATMX/NOPB | Texas Instruments | Other Interface ICs; DS26C32ATMX/NOPB; TEXAS INSTRUMENTS; 16; 5.5 V; 4.5 V; SOIC RoHS : Compliant |
| 1,805 | ||
| TGS2610-D00 | FIGARO Engineering Inc | MOS-type propane, butane gas sensor; range: 1-25%LEL; supply: 5V; power: 280mW; filter built-in |
| 995 | ||
| PBMS26S-CT | CONNTHERM | Pin Header; pitch 2.00mm; 1x26 pins; assembly: THT; female; straight; single row |
| 901 | ||
| SM24W3S26 | SOURIAU-SUNBANK | Male terminal; current 5A; for AWG26-24 RoHS : Compliant |
| 450 | ||
| MBRS260T3G | onsemi | Rectifier Diodes & Bridges; MBRS260T3G; ON SEMICONDUCTOR; 2; 2 A; 60 V; 200 �A RoHS : Compliant |
| 393 | ||
| SS26T3G | onsemi | Rectifier Diodes & Bridges; SS26T3G; ON SEMICONDUCTOR; 2; 2 A; 60 V; 200 �A RoHS : Compliant |
| 129 | ||
| TGS2603 | FIGARO Engineering Inc | MOS-type air pollutants gas sensor; range: 1-10ppm C2H5OH; supply: 5V; power: 240 mW |
| 42 | ||
| TGS2600 | FIGARO Engineering Inc | MOS-type air pollutants gas sensor; range: 1-30ppm H2; supply: 5V; power: 210mW |
| 36 | ||
| TGS2602 | FIGARO Engineering Inc | MOS-type air pollutants gas sensor; range: 1-30ppm C2H5OH; supply: 5V; power: 280mW |
| 34 | ||
| NS-26CW108-XHEQ38A2 | NiViss | MCPCB module; aluminium 5052; circle 108mm; 26 x XPEHEW-L1-00BE8; warm white; Q3; 8A2; cable red; blue 25cm; RoHS |
| 6 | ||
SN74LS266D | Texas Instruments | Logic Gates; SN74LS266D; TEXAS INSTRUMENTS; 14; NOR, XNOR; 5.25 V; 4.75 V RoHS : Compliant |
| 2 | ||
 Master Electronics | 8976-SS-26 | RAF Electronic Hardware | Style 1 Ferrules For Handles RoHS : Compliant |
| 143 | |
| IDSS-26-S-26.63 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| 44A9436-24-9/96CS2621 | TE Connectivity | 44A9436-24-9/96CS2621 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 55/4324-26-0/9-0CS2642 | TE Connectivity | 55/4324-26-0/9-0CS2642 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 55A0832-18-9/93/96CS2655 | TE Connectivity | 55A0832-18-9/93/96CS2655 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 55A6315-16-9-9CS2632 | TE Connectivity | 55A6315-16-9-9CS2632 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 55A7225-22-6/9-9CS2628 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part RYC55A7225-22-6/9-9CS2628 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 55A7234-24-MSL5-9CS2627 | TE Connectivity | MOQ Reduction RoHS : Compliant |
| 0 | ||
| 55A7301-12-9-9CS2621 | TE Connectivity | 55A7301-12-9-9CS2621 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 55PC0211-18-9CS2600 | TE Connectivity | 55PC0211-18-9CS2600 MOQ Reduction RoHS : Compliant |
| 0 | ||
| 55PC1141-20-MSL4-9CS2609 | TE Connectivity | Cross Referenced to TE CNTY RAYCHEM - Part RYC55PC1141-20-MSL4-9CS26 MOQ Reduction RoHS : Compliant |
| 0 | ||
| ABLS-26.000MHZ-K4F-T | Abracon Corporation | Crystal - 26.000MHZ (+/-) 30ppm - 18pF - SMD LOW PROFILE - HC/49US (AT49) - -40°C to +125 °C - Tape&Reel RoHS : Compliant |
| 0 | ||
| IDMS-26-D-02.48 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| IDMS-26-D-04.00 | Samtec Inc | .100 Slim Body Single Row IDC Ribbon Cable Assembly Terminal RoHS : Compliant |
| 0 | ||
| IDMS-26-S-02.50 | Samtec Inc | RoHS : Compliant |
| 0 | ||
 Neutron USA | TS-264-8G-US | Qnap Systems Inc | INTEL 4C/4T 2.9GHZ WITH 8GB DDR4 2X2.5GBE 2XM.2 2280 |
| 50 | |
| PS26PD32WCAM | Eaton Corporation | SAFE-IT POWER STRIP 2-OUTLET 32W 5-15R 2 USB-A USB C CHARGING |
| 50 | ||
| XS26-2E | Banner Engineering Corp | Safety Controller, Expandable, 26 Safe In, 8 Convert In, 4 Indep contrl Safe Out, 2 OSSD Pairs, 11 Non Safe Out PNP, 24Vdc, 85063 |
| 50 | ||
| VS26S517DF213A | Norgren | Valve, 5/2, sol/spr rtnl, 24VDC, lock, soft seal spool |
| 23 | ||
| 2AS2-6 | Altech Corporation | Switch Actuators Selec. Opr.,22 mm,3 Pos., |
| 23 | ||
| VS26SA11DF213A | Norgren | Valve, 2X3/2 NC, sol/spring rtn, int pilot, 3-10 bar, 24VDC, push/turn override |
| 2 | ||
| MS-26 | Jonard Tools | Fiber Optic Connectors Industries |
| 0 | ||
| M3SS2-60B20 | ABB Low Voltage Products and Systems | 3POS SW MOM BLK KNOB 2-NO |
| 0 | ||
| EN3INS26 | Switchcraft Conxall | Extraction, Removal & Insertion Tools EN3 INSERTION TOOL FOR 26 AWG CONTACTS RoHS : Compliant |
| 0 | ||
| TS-262-4G-US | Qnap Systems Inc | QNAP 2BAY DESKTOP NAS INTEL CEL INTEL N4505 2C/2T |
| 0 | ||
| AFS26Z-30-22-30 | ABB Low Voltage Products and Systems | Contactor 3P Main: 3NO, Aux: 2NO2NC, Control: 24VDC, 690 VAC, AC-1: 45A |
| 0 | ||
| WTS26P-24161120A00 | SICK AG | Photoelectric, Compact sensor, BGS, R: 0.01-1M, 635nm, Push-pull: PNP/NPN L/D, M12 Conn |
| 0 | ||
| CCP2S-2-60CF | Eaton Bussmann | Compact Circuit Protector;2 Pole;W/Side Mount Mechanism Right Side;CUBEForce;60A |
| 0 | ||
| SDCS2/64GB | Kingston Technology Company | 64GB MICSDXC CNVS SELECT PLUS 100R A1 |
| 0 | ||
| VS26S611DF313A | Norgren | Norgren VS26S611DF313A Double Solenoid Valve, 24VDC, 5/3, APB, 1350L/M, VS26 Series |
| 0 | ||
 Pasternack Enterprises US | PE3C2346/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to TNC Male Low Loss Cable 60 Inch Length Using LMR-240 Coax With Times Microwave Components with Double HeatShrink., Radio frequency assembly N male to TNC male low loss cable 60 inch length using LMR-240 coax with Times Microwave components with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male low loss cable 60 inch length using LMR-240 coax with Times Microwave components with double heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and TNC cable connection on the other. Our low loss N type to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C2346/HS2-60 can also be known as a low loss N type plug to TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3C2346/HS2-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2346/HS2-60 can also be used in the other direction and will be TNC male to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male low loss cable 60 inch length using LMR-240 coax with Times Microwave components with double heatshrink. |
| 4,213 | |
| PE3C0053/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Male Low Loss Cable 60 Inch Length Using LMR-240 Coax with Double Heatshrink., Radio frequency assembly N male to N male low loss cable 60 inch length using LMR-240 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 60 inch length using LMR-240 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3C0053/HS2-60 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to N type plug cable assembly PE3C0053/HS2-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 60 inch length using LMR-240 coax with double heatshrink. |
| 2,009 | ||
| PE3W02498/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240-DB, RF Cable Type: LMR-240-DB, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male Right Angle to TNC Male Right Angle Low Loss Cable 60 Inch Length Using LMR-240-DB Coax with Double HeatShrink., Radio frequency assembly TNC male right angle to TNC male right angle low loss cable 60 inch length using LMR-240-DB coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male right angle to TNC male right angle low loss cable 60 inch length using LMR-240-DB coax with double heatshrink, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle TNC to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W02498/HS2-60 can also be known as a low loss right angle TNC plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3W02498/HS2-60 is built with LMR-240-DB which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male right angle to TNC male right angle low loss cable 60 inch length using LMR-240-DB coax with double heatshrink. |
| 1,674 | ||
| PE3C3196/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMA Female to N Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly SMA female to N male low loss cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA female to N male low loss cable 60 inch length using LMR-195 coax with double heatshrink, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and type N cable connection on the other. Our low loss SMA to type N cable assemblies have a female gender on end 1 and male on end 2. PE3C3196/HS2-60 can also be known as a low loss SMA jack to N type plug cable assembly and will be shipped same-day as it is purchased. SMA jack to type N plug cable assembly PE3C3196/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this SMA female to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3196/HS2-60 can also be used in the other direction and will be N type male to SMA female cable assembly if the opposite connectivity is required. Low loss SMA jack to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female to N male low loss cable 60 inch length using LMR-195 coax with double heatshrink. |
| 790 | ||
| PE3C6335/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: UHF, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male Right Angle to UHF Female Low Loss Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly N male right angle to UHF female low loss cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to UHF female low loss cable 60 inch length using LMR-195 coax with double heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to UHF cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle type N cable connection on one end and UHF cable connection on the other. Our low loss right angle type N to UHF cable assemblies have a male gender on end 1 and female on end 2. PE3C6335/HS2-60 can also be known as a low loss right angle N type plug to UHF jack cable assembly and will be shipped same-day as it is purchased. Type N plug to UHF jack cable assembly PE3C6335/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to UHF cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 300 MHz maximum frequency type N right angle male to UHF female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6335/HS2-60 can also be used in the other direction and will be UHF female to right angle type N male cable assembly if the opposite connectivity is required. Low loss N type right angle plug to UHF jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to UHF cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to UHF female low loss cable 60 inch length using LMR-195 coax with double heatshrink. |
| 254 | ||
| PE3C0108/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male to N Female Bulkhead Cable 12 Inch Length Using LMR-240 Coax with Double HeatShrink., Radio frequency assembly TNC male to N female bulkhead cable 12 inch length using LMR-240 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The TNC male to N female bulkhead cable 12 inch length using LMR-240 coax with double heatshrink, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to type N cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with TNC cable connection on one end and N type bulkhead cable connection on the other. Our TNC to type N cable assemblies have a male gender on end 1 and female on end 2. This TNC to type N cable is a male to female coax assembly, PE3C0108/HS2-60, can also be known as a TNC plug to type N jack cable assembly and will be shipped same-day as it is purchased. TNC plug to N type jack cable assembly PE3C0108/HS2-60 is built with LMR-240 which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with TNC to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency TNC male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0108/HS2-60 can also be used in the other direction and will be type N female bulkhead to TNC male cable assembly if the opposite connectivity is required. TNC plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male to N female bulkhead cable 12 inch length using LMR-240 coax with double heatshrink. |
| 240 | ||
| PE3W06854/HS2-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: QN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 60 inches. QN Male to Reverse Polarity SMA Female Bulkhead Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly QN male to reverse polarity SMA female bulkhead cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QN male to reverse polarity SMA female bulkhead cable 60 inch length using LMR-195 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QN to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with QN cable connection on one end and reverse polarity SMA bulkhead cable connection on the other. Our QN to reverse polarity SMA cable assemblies have a male gender on end 1 and female on end 2. This QN to reverse polarity SMA cable is a male to female coax assembly, PE3W06854/HS2-60, can also be known as a QN plug to reverse polarity SMA jack cable assembly and will be shipped same-day as it is purchased. QN plug to reverse polarity SMA jack cable assembly PE3W06854/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible QN cable assembly is manufactured with QN to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency QN male to reverse polarity SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W06854/HS2-60 can also be used in the other direction and will be reverse polarity SMA female bulkhead to QN male cable assembly if the opposite connectivity is required. QN plug to SMA reverse polarity jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QN to SMA cable assembly for quick shipment worldwide. Variations of QN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QN male to reverse polarity SMA female bulkhead cable 60 inch length using LMR-195 coax with double heatshrink. |
| 114 | ||
| PE3C2368/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: LMR-400-DB, RF Cable Type: LMR-400-DB, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. TNC Male RA to TNC Male RA Low Loss Cable 60 Inch Length Using LMR-400-DB Coax With Times Microwave Components with Double HeatShrink., Radio frequency assembly TNC male RA to TNC male RA low loss cable 60 inch length using LMR-400-DB coax with Times Microwave components with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The TNC male RA to TNC male RA low loss cable 60 inch length using LMR-400-DB coax with Times Microwave components with double heatshrink, TNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with right angle TNC cable connection on one end and right angle TNC cable connection on the other. Our low loss right angle TNC to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C2368/HS2-60 can also be known as a low loss right angle TNC plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. TNC plug to TNC plug cable assembly PE3C2368/HS2-60 is built with LMR-400-DB which is a flexible coax type. The Pasternack flexible TNC cable assembly is manufactured with right angle TNC to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency TNC right angle male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss TNC right angle plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to TNC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this TNC male RA to TNC male RA low loss cable 60 inch length using LMR-400-DB coax with Times Microwave components with double heatshrink. |
| 8 | ||
| PE345/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to N Male Right Angle Low Loss Cable 60 Inch Length Using PE-P142LL Coax with Double HeatShrink., Radio frequency assembly N male to N male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and right angle type N cable connection on the other. Our low loss type N to right angle N type cable assemblies have a male gender on end 1 and male on end 2. PE345/HS2-60 can also be known as a low loss type N plug to right angle N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE345/HS2-60 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to right angle type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency N type male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE345/HS2-60 can also be used in the other direction and will be right angle N type male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink. |
| 0 | ||
| PE3C2887/HS2-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. Mini SMP Female Right Angle to SMA Male Cable 6 Inch Length Using PE-P047 Coax with Double HeatShrink., Radio frequency assembly mini SMP female right angle to SMA male cable 6 inch length using PE-P047 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Mini SMP female right angle to SMA male cable 6 inch length using PE-P047 coax with double heatshrink, mini SMP cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMP to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle mini SMP cable connection on one end and SMA cable connection on the other. Our right angle mini SMP to SMA cable assemblies have a female gender on end 1 and male on end 2. This mini SMP to SMA cable is a female to male coax assembly, PE3C2887/HS2-6, can also be known as a right angle mini SMP jack to SMA plug cable assembly and will be shipped same-day as it is purchased. Mini SMP jack to SMA plug cable assembly PE3C2887/HS2-6 is built with PE-P047 which is a flexible coax type. The Pasternack flexible Mini SMP cable assembly is manufactured with right angle mini SMP to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 12 GHz maximum frequency mini SMP right angle female to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2887/HS2-6 can also be used in the other direction and will be SMA male to right angle mini SMP female cable assembly if the opposite connectivity is required. Mini SMP right angle jack to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this mini SMP female right angle to SMA male cable 6 inch length using PE-P047 coax with double heatshrink. |
| 0 | ||
| PE3W00013/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to TNC Male Low Loss Cable 60 Inch Length Using LMR-400 Coax with Times Microwave Components with Double HeatShrink., Radio frequency assembly N male to TNC male low loss cable 60 inch length using LMR-400 coax with Times Microwave components with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male low loss cable 60 inch length using LMR-400 coax with Times Microwave components with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and TNC cable connection on the other. Our low loss N type to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W00013/HS2-60 can also be known as a low loss type N plug to TNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to TNC plug cable assembly PE3W00013/HS2-60 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00013/HS2-60 can also be used in the other direction and will be TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male low loss cable 60 inch length using LMR-400 coax with Times Microwave components with double heatshrink. |
| 0 | ||
| PE3C1527/HS2-6 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. BNC Male to BNC Male Cable 6 Inch Length Using RG316-DS Coax with Double HeatShrink., Radio frequency assembly BNC male to BNC male cable 6 inch length using RG316-DS coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to BNC male cable 6 inch length using RG316-DS coax with double heatshrink, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1527/HS2-6 can also be known as a BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. BNC plug to BNC plug cable assembly PE3C1527/HS2-6 is built with RG316-DS which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC male to BNC male cable 6 inch length using RG316-DS coax with double heatshrink. |
| 0 | ||
| PE3C1609/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. SMB Plug to SMA Male Low Loss Cable 60 Inch Length Using LMR-195 Coax with Double HeatShrink., Radio frequency assembly SMB plug to SMA male low loss cable 60 inch length using LMR-195 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMB plug to SMA male low loss cable 60 inch length using LMR-195 coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to SMA cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMB cable connection on one end and SMA cable connection on the other. Our low loss SMB to SMA cable assemblies have a plug gender on end 1 and male on end 2. PE3C1609/HS2-60 can also be known as a low loss SMB male to SMA plug cable assembly and will be shipped same-day as it is purchased. SMB male to SMA plug cable assembly PE3C1609/HS2-60 is built with LMR-195 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 4 GHz maximum frequency SMB plug to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1609/HS2-60 can also be used in the other direction and will be SMA male to SMB plug cable assembly if the opposite connectivity is required. Low loss SMB male to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to SMA cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMB plug to SMA male low loss cable 60 inch length using LMR-195 coax with double heatshrink. |
| 0 | ||
| PE3W00029/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Female Bulkhead to N Female Bulkhead Low Loss Cable 60 Inch Length Using LMR-400 Coax with Double HeatShrink., Radio frequency assembly N female bulkhead to N female bulkhead low loss cable 60 inch length using LMR-400 coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female bulkhead to N female bulkhead low loss cable 60 inch length using LMR-400 coax with double heatshrink, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N bulkhead cable connection on one end and type N bulkhead cable connection on the other. Our low loss N type to type N cable assemblies have a female gender on end 1 and female on end 2. PE3W00029/HS2-60 can also be known as a low loss N type jack to type N jack cable assembly and will be shipped same-day as it is purchased. Type N jack to type N jack cable assembly PE3W00029/HS2-60 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N female bulkhead to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N jack bulkhead to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female bulkhead to N female bulkhead low loss cable 60 inch length using LMR-400 coax with double heatshrink. |
| 0 | ||
| PE3C1041/HS2-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to TNC Male Right Angle Low Loss Cable 60 Inch Length Using PE-P142LL Coax with Double HeatShrink., Radio frequency assembly N male to TNC male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and right angle TNC cable connection on the other. Our low loss type N to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3C1041/HS2-60 can also be known as a low loss type N plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. N type plug to TNC plug cable assembly PE3C1041/HS2-60 is built with PE-P142LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle TNC cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency N type male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C1041/HS2-60 can also be used in the other direction and will be right angle TNC male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male right angle low loss cable 60 inch length using PE-P142LL coax with double heatshrink. |
| 0 | ||
 Teledyne HiRel | DM54LS260J/883 | Teledyne HiRel | NOR GATE, DUAL 5-INPUT | 0 | ||
| DM54LS260E/883 | Teledyne HiRel | NOR GATE, DUAL 5-INPUT | 0 | |||
 Vyrian | MAX6385XS26D4-T | Maxim Integrated Products | Power Supply Support Circuit, Fixed, 1 Channel, BICMOS, PDSO4 RoHS : Not Compliant | 12,979 | ||
| CY8C4147LQS-S265 | Infineon Technologies AG | Programmable SoC, CMOS RoHS : Compliant | 12,088 | |||
| S26HL02GTFGBHB043 | Infineon Technologies AG | Flash, 2GX1, PBGA24 RoHS : Compliant | 11,842 | |||
| MAX6444US26T/V+T | Analog Devices Inc | Power Supply Support Circuit RoHS : Compliant | 10,824 | |||
| MAX6389XS26D4+ | Analog Devices Inc | Power Management Circuit, Adjustable, 1 Channel, +2.63V, BICMOS, PDSO4 RoHS : Compliant | 10,133 | |||
| MFS2613AMDA2AD | NXP Semiconductors | RoHS : Compliant | 8,596 | |||
LM3S2620-IBZ25-A2 | Texas Instruments | RISC Microcontroller, 32-Bit, FLASH, 25MHz, CMOS, PBGA108 RoHS : Compliant | 7,708 | |||
| DS26518GNB1+ | Analog Devices Inc | Framer RoHS : Compliant | 6,438 | |||
| ADNS-2620 | Broadcom Limited | RoHS : Compliant | 5,860 | |||
LM3S2651-EQC50-A2T | Texas Instruments | RISC Microcontroller, 32-Bit, FLASH, 50MHz, CMOS, PQFP100 RoHS : Compliant | 5,852 | |||
| MAX6315US26D2+ | Analog Devices Inc | Power Supply Support Circuit, Adjustable, 1 Channel, +2.63V, CMOS, PDSO4 RoHS : Compliant | 5,265 | |||
LM3S2671-IQR50-A0T | Texas Instruments | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M3 CPU, 50MHz, CMOS, PQFP64 RoHS : Compliant | 3,597 | |||
| MAX6443US26L-T | Maxim Integrated Products | Power Supply Support Circuit, Adjustable, 1 Channel, +2.63VV, BICMOS, PDSO4 RoHS : Not Compliant | 1,069 | |||
| CS2660-9ERG | Bel Fuse | DC-DC Regulated Power Supply Module RoHS : Compliant | 485 | |||
| DS26C31TMDC | National Semiconductor Corporation | Line Driver, 4 Func, 4 Driver, CMOS RoHS : Compliant | 454 | |||
 Win Source Electronics | MURS260T3G | onsemi | DIODE GEN PURP 600V 2A SMB / Rectifier Diode Switching 600V 2A 75ns 2-Pin SMB T/R RoHS : Compliant |
| 80,000 | |
| SS26HE3_A/H | Vishay Huntington | Diode Schottky 60V 2A Automotive 2-Pin SMB T/R / DIODE SCHOTTKY 60V 2A DO214AA |
| 51,000 | ||
| PTVS26VU1UPAZ | Nexperia | TVS DIODE 26VWM 42.1VC 3HUSON / 42.1V Clamp 7A Ipp Tvs Diode Surface Mount 3-HUSON (2x2) RoHS : Compliant |
| 30,140 | ||
DS26C31TM | Texas Instruments | IC LINE DRIVER QUAD CMOS 16-SOIC RoHS : Not Compliant |
| 15,387 | ||
| SS26-E3/52T | Vishay Huntington | DIODE SCHOTTKY 60V 2A DO214AA / Rectifier Diode Schottky 60V 2A 2-Pin SMB T/R |
| 15,000 | ||
DS26C31TMX/NOPB | Texas Instruments | IC LINE DRIVER QUAD CMOS 16-SOIC RoHS : Compliant |
| 9,490 | ||
| TPS26612DDFR | Texas Instruments | IC CURRENT REGULATOR TSOT23-8 / Current Regulator Regulator TSOT-23-8 RoHS : Compliant |
| 9,013 | ||
| DS26C32ATM | Texas Instruments | IC LINE RCVR QUAD CMOS 16-SOIC RoHS : Not Compliant |
| 8,800 | ||
| DS26LS31CMX | Texas Instruments | IC DRIVER 4/0 16SOIC / 4/0 Driver RS422, RS485 16-SOIC RoHS : Not Compliant |
| 6,800 | ||
| MAX6315US26D3+ | Maxim Integrated Products | RoHS : Compliant |
| 6,239 | ||
| MAX6315US26D3-T | Maxim Integrated Products | IC RESET CIRCUIT 2.63V SOT143-4 RoHS : Not Compliant |
| 5,680 | ||
| TPS26400RHFR | Texas Instruments | RoHS : Compliant |
| 5,430 | ||
| TPS26632RGER | Texas Instruments | IC ELECTRONIC FUSE 2% 24VQFN / Electronic Fuse Regulator 6A 24-VQFN (4x4) RoHS : Compliant |
| 3,041 | ||
TPS26623DRCT | Texas Instruments | IC ELECTRONIC FUSE 5% 10VSON / Electronic Fuse Regulator 880mA 10-VSON (3x3) RoHS : Compliant |
| 2,870 | ||
| S26KS512SDPBHI020 | Cypress Semiconductor | IC FLASH 512MBIT PARALLEL 24FBGA / FLASH - NOR Memory IC 512Mb (64M x 8) Parallel 166 MHz 96 ns 24-FBGA (6x8) RoHS : Compliant |
| 1,396 | ||
 Wuhan P&S | MBRS260T3G | onsemi | Surface Mount Schottky Barrier Power Rectifier RoHS : Compliant |
| 105,000 | |
| SS26HE3_A/H | Vishay Intertechnologies | Schottky Barrier Rectifier,2A,60V RoHS : Compliant |
| 17,250 |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Russian ▼ 
English
Chinese
German
Japanese
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand