 |
поискавой системы для электроныых деталей |
|
|
поискавой системы для электроныых деталей |
|
S180-WP-R дистрибьютор |
| дистрибьютор | номер детали | производитель | подробное описание детали | Price | Qty. BuyNow | |
 Avnet Americas | SQS180ENW-T1_GE3 | Vishay Intertechnologies | Automotive N-Channel 40 V (D-S) 175C MOSFET PowerPAK 1212-8SLW - Tape and Reel (Alt: SQS180ENW-T1_GE3) RoHS : Not Compliant |
| 3,000 | |
| 600S180FW250XT | Kyocera AVX Components | MLC 600 - Tape and Reel (Alt: 600S180FW250XT) RoHS : Not Compliant |
| 2,000 | ||
ASPI-6045S-180M-T | Abracon Corporation | - Tape and Reel (Alt: ASPI-6045S-180M-T) RoHS : Compliant |
| 1,500 | ||
| 16SVPS180M | Panasonic Electronic Components | Polymer Aluminium Electrolytic Capacitor, 180 uF, 16 V, Radial Can - SMD, 0.029 ohm - Tape and Reel (Alt: 16SVPS180M) RoHS : Compliant |
| 1,000 | ||
| AHDPBS-18-002 | Amphenol Corporation | - Boxed Product (Development Kits) (Alt: AHDPBS-18-002) RoHS : Compliant |
| 68 | ||
| MTMM-125-04-F-S-180 | Samtec Inc | Pin Header, Board-to-Board, Wire-to-Board, 1 Rows, 25 Contacts, Through Hole, MTMM Series - Bulk (Alt: MTMM-125-04-F-S-180) RoHS : Compliant |
| 0 | ||
| MTSW-106-06-G-S-180 | Samtec Inc | - Bulk (Alt: MTSW-106-06-G-S-180) RoHS : Compliant | 0 | |||
| MTSW-109-24-T-S-180-RA | Samtec Inc | - Bulk (Alt: MTSW-109-24-T-S-180-RA) RoHS : Compliant | 0 | |||
| MTSW-112-24-T-S-180-RA | Samtec Inc | - Bulk (Alt: MTSW-112-24-T-S-180-RA) RoHS : Compliant | 0 | |||
| MMSS-06-24-S-18.00-S-K | Samtec Inc | - Bulk (Alt: MMSS-06-24-S-18.00-S-K) RoHS : Compliant |
| 0 | ||
| MTLW-102-06-T-S-180 | Samtec Inc | - Bulk (Alt: MTLW-102-06-T-S-180) RoHS : Compliant | 0 | |||
| MTMM-110-07-G-S-180 | Samtec Inc | - Bulk (Alt: MTMM-110-07-G-S-180) RoHS : Compliant | 0 | |||
| MTMM-112-04-F-S-180 | Samtec Inc | Pin Header, Board-to-Board, Wire-to-Board, 1 Rows, 12 Contacts, Through Hole, MTMM Series - Bulk (Alt: MTMM-112-04-F-S-180) RoHS : Compliant |
| 0 | ||
| TCSD-10-S-18.00-01-P20 | Samtec Inc | Cable Assembly Flat Ribbon 28AWG 0.46m 20 Position IDC Connector Receptacle - Bulk (Alt: TCSD-10-S-18.00-01-P20) RoHS : Compliant |
| 0 | ||
| TCSD-20-S-18.00-01 | Samtec Inc | - Bulk (Alt: TCSD-20-S-18.00-01) RoHS : Compliant |
| 0 | ||
 Newark | SQS180ENW-T1_GE3 | Vishay Intertechnologies | Automotive N-Channel 40 V D-S 175C M; |Vishay SQS180ENW-T1_GE3 RoHS : Compliant |
| 1,958 | |
| DS1804-010+ | Analog Devices Inc | Pot Digital Nv, 10Kohm, Single; |Analog Devices, Inc. DS1804-010+ RoHS : Compliant |
| 1,512 | ||
| 16SVPS180M | Panasonic Electronic Components | Cap, 180Uf, 3.43A, 16V, Radial Can, Smd; |Panasonic 16SVPS180M RoHS : Compliant |
| 1,000 | ||
| DS1804Z-010+ | Analog Devices Inc | Digital Pot Sngl 10K, 1804, Soic8; |Analog Devices, Inc. DS1804Z-010+ RoHS : Compliant |
| 849 | ||
MCP1826S-1802E/DB | Microchip Technology Inc | Fixed Ldo Voltage Regulator, 2.3V-6V; |Microchip Technology MCP1826S-1802E/DB RoHS : Compliant |
| 827 | ||
| DS1809Z-010+ | Analog Devices Inc | Digital Pot, 10K, Single, Nsoic-8; |Analog Devices, Inc. DS1809Z-010+ RoHS : Compliant |
| 453 | ||
| MCS1802GS-40-P | Monolithic Power Systems | Current Sensor, 40A, -40 To 125Deg C; |Monolithic Power Systems (Mps) MCS1802GS-40-P RoHS : Compliant |
| 250 | ||
| MCS1802GS-40-P | Monolithic Power Systems | Current Sensor, 40A, -40 To 125Deg C; |Monolithic Power Systems (Mps) MCS1802GS-40-P RoHS : Compliant |
| 250 | ||
| MCS1801GS-25-P | Monolithic Power Systems | Current Sensor, 25A, -40 To 125Deg C; |Monolithic Power Systems (Mps) MCS1801GS-25-P RoHS : Compliant |
| 121 | ||
| MCS1801GS-25-P | Monolithic Power Systems | Current Sensor, 25A, -40 To 125Deg C; |Monolithic Power Systems (Mps) MCS1801GS-25-P RoHS : Compliant |
| 121 | ||
| ATBS-PS-1805 | Amphenol Sine Systems | Backshell, 180Deg, 18Pos, Black; Accessory Type:Backshell; For Use With:Amphenol At Series Heavy-Duty Connectors; Connector Shell Size:18; Cable Exit Angle:180°; Connector Body Material:Thermoplastic Body; Product Range:At Series Rohs Compliant: Yes RoHS : Compliant |
| 114 | ||
| TRS1-80BPR001 | KEMET Corporation | Thermal Reed Sw, Break, 0.5A, 80Deg C; Switching Temperature:80°C; Switching Temperature Tolerance:± 3°C; Thermal Reed Switch Contact Type:Break; Sensor Mounting:Screw-In; Thermal Reed Switch Terminals:Quick Connect; Approvals:- Rohs Compliant: Yes RoHS : Compliant |
| 10 | ||
| S8VS-18024B | OMRON Industrial Automation | Psu Ac/Dc Din, Ite, 1, 180W; |Omron Industrial Automation S8VS-18024B RoHS : Compliant |
| 4 | ||
| ADZS-180PWM-SAM | Analog Devices Inc | Pwm Probing Board, Arm, Cortex-M4; |Analog Devices, Inc. ADZS-180PWM-SAM RoHS : Compliant |
| 3 | ||
| MCSS18065 | nVent Hoffman | Enclosure, Single Door, Ip55; |Nvent Hoffman MCSS18065 RoHS : Compliant |
| 1 | ||
 Analog Devices Inc | DS1809U-100+T&R | Analog Devices Inc | Dallastat RoHS : Compliant |
| 9,000 | |
| DS1804Z-050+ | Analog Devices Inc | Nonvolatile Trimmer Potentiome RoHS : Compliant |
| 7,468 | ||
| DS1804-050+ | Analog Devices Inc | Nonvolatile Trimmer Potentiome RoHS : Compliant |
| 3,739 | ||
| DS1809U-100+ | Analog Devices Inc | Dallastat RoHS : Compliant |
| 2,687 | ||
| DS1804U-100+T&R | Analog Devices Inc | Nonvolatile Trimmer Potentiome RoHS : Compliant |
| 1,135 | ||
| DS1804U-100+ | Analog Devices Inc | Nonvolatile Trimmer Potentiome RoHS : Compliant |
| 810 | ||
| DS1804Z-050+T&R | Analog Devices Inc | Nonvolatile Trimmer Potentiome RoHS : Compliant |
| 500 | ||
| ADZS-180PWM-SAM | Analog Devices Inc | PWM/Memory 180-Pin Probing Boa |
| 16 | ||
| DS1803Z-100+T&R | Analog Devices Inc | Addressable Dual Digital Poten RoHS : Compliant |
| 0 | ||
| DS1806E-050+T&R | Analog Devices Inc | Digital Sextet Potentiometer RoHS : Compliant |
| 0 | ||
| ADBMS1804AWFSCCSZ-RL | Analog Devices Inc | 12V car low voltage battery mo RoHS : Compliant | 0 | |||
| DS1809Z-050+ | Analog Devices Inc | Dallastat RoHS : Compliant | 0 | |||
| DS1807E+T&R | Analog Devices Inc | Addressable Dual Audio Taper P RoHS : Compliant |
| 0 | ||
| ADBMS1804AWFSCCSZ-R7 | Analog Devices Inc | 12V car low voltage battery mo RoHS : Compliant | 0 | |||
| DS1803E-100+T&R | Analog Devices Inc | Addressable Dual Digital Poten RoHS : Compliant |
| 0 | ||
 RS | IME2S18-05B4DC0 (1091949) | SICK AG | NON-CONTACT SAFETY SWITCH, INDUCTIVE PROXIMITY SENSOR, 18MM BARREL, IP67 |
| 48 | |
| AHDMBS-18-002 | Amphenol Sine Systems | BACKSHELL, SIZE 18, AHDM SERIES, 2 PC. |
| 25 | ||
| NEBV-Z4WA2L-P-E-5-N-LE2-S1 (8047672) | Festo | CONNECTING CABLE FIELD DEVICE TO CONTROLLER ZC 2/2 TO 2/2 OPEN END 5M |
| 13 | ||
| ACS180-04S-01A8-4 (3AXD50000864690) | ABB Group | MICRO DRIVE, 3-PHASE, 0.5HP, 480VAC, R0 FRAME, N1/IP21, ACS150 SERIES |
| 10 | ||
| S8VS-18024A (S8VS18024A) | OMRON Industrial Automation | AC-DC POWER SUPPLY, 24V, 7.5A, 85-264V, ENCLOSED, PFC, 180W, S8VS SERIES |
| 8 | ||
| APQS18-020 (67551) | Banner Engineering Corp | APERTURE, CIRCULAR, 0.5 MM DIAMETER, (PKG OF 6), USED W/QS18 OPPOSED MODE SENSOR |
| 7 | ||
| ACS180-04S-09A4-4 (3AXD50000864751) | ABB Group | MICRO DRIVE, 3-PHASE, 480VAC, 3HP, 03U, N1/IP21, R1 FRAME, ACS180 SERIES |
| 6 | ||
| BAM00T3 (BOS 18,0-KB-1) | Balluff Inc | BALLUFF MOUNTING CLAMP FOR USE WITH 0-KB-1 BOS 18 M18 SENSOR |
| 4 | ||
| ACS180-04S-033A-4 (3AXD50000874330) | ABB Group | AC DRIVE, 3-PHASE, 380-480V, 20HP, FRAME R4, ACS311, ACS310 SERIES |
| 3 | ||
HWS1800T-36 | TDK-Lambda Corporation | POWER SUPPLY, AC-DC,36V,50A,85-265V IN, ENCLOSED, PANEL MOUNT, PFC, HWS1800T SERIES RoHS : Compliant |
| 2 | ||
| AHDMBS-18-059 | Amphenol Sine Systems | BACKSHELL WITH CAMBLE CLAMP, SIZE 18 |
| 2 | ||
| ACS180-04S-17A5-2 (3AXD50000864652) | ABB Group | AC DRIVE, 3-PHASE, 200-240V, 5HP, FRAME R2, ACS311, ACS310 SERIES |
| 2 | ||
| HWS1800T-24 (HWS1800T24) | TDK-Lambda Corporation | POWER SUPPLY, AC-DC,24V,75A,85-265V IN, ENCLOSED, PANEL MOUNT, PFC, HWS1800T SERIES |
| 1 | ||
| ACS180-04S-04A8-2 (3AXD50000857401) | ABB Group | MICRO DRIVE, 0.75HP, 03U, WALL MOUNT, N1/IP21, 200VAC, ACS150 SERIES |
| 1 | ||
| VPPM-6L-L-1-G18-0L6H-LK-S1 (8024259) | Festo | PROPORTIONAL-PRESSURE REGULATOR, 3 WAY, G1/8, 0-6 BAR REG RANGE, I/O LINK,1% AC |
| 1 | ||
 Microchip Technology Inc | MCP1826S-1802E/AB | Microchip Technology Inc | 1.0A LDO, TO-220, Projected EOL: 2036-09-05 RoHS : Compliant |
| 18,340 | |
| MCP1755S-1802E/MC | Microchip Technology Inc | 16v, 300 mA low quiescent current LDO with shutdown, DFN, Projected EOL: 2040-12-26 RoHS : Compliant |
| 17,100 | ||
| MCP1825S-1802E/AB | Microchip Technology Inc | 500mA LOW VOLTAGE, LOW IQ LDO, TO-220, Projected EOL: 2036-09-05 RoHS : Compliant |
| 15,150 | ||
| MCP1825S-1802E/DBVAO | Microchip Technology Inc | 500mA LOW VOLTAGE, LOW IQ LDO, SOT-223, Projected EOL: 2051-01-09 RoHS : Compliant |
| 13,182 | ||
MCP1826S-1802E/EB | Microchip Technology Inc | 1.0A LDO, DDPAK, Projected EOL: 2036-09-05 RoHS : Compliant |
| 11,200 | ||
MCP1827S-1802E/EB | Microchip Technology Inc | 1.5A LDO Regulator, DDPAK, Projected EOL: 2036-09-06 RoHS : Compliant |
| 9,850 | ||
| MCP1825S-1802E/EB | Microchip Technology Inc | 500MA LOW VOLTAGE, LOW IQ LDO, DDPAK, Projected EOL: 2036-09-05 RoHS : Compliant |
| 5,000 | ||
| MCP1826S-1802E/DB | Microchip Technology Inc | 1.0A LDO, SOT-223, Projected EOL: 2036-09-05 RoHS : Compliant |
| 3,846 | ||
| MCP1825S-1802E/DB | Microchip Technology Inc | 500mA LOW VOLTAGE, LOW IQ LDO, SOT-223, Projected EOL: 2036-09-05 RoHS : Compliant |
| 1,384 | ||
| MCP1827S-1802E/AB | Microchip Technology Inc | 1.5A LDO Regulator, TO-220, Projected EOL: 2036-09-06 RoHS : Compliant |
| 1,000 | ||
| TFS180S | Microchip Technology Inc | TFS180S, Projected EOL: 2050-07-31 - Contact for Pricing | 0 | |||
| UPS180E3/TR13 | Microchip Technology Inc | Small-Signal Schottky _ 1 PMT (D0216), Projected EOL: 2051-02-02 RoHS : Compliant |
| 0 | ||
| UFS180JE3/TR13 | Microchip Technology Inc | UFR,FRR _ SMBJ (DO-214AA), Projected EOL: 2049-02-05 RoHS : Compliant |
| 0 | ||
| 990-4380A-TS180 | Microchip Technology Inc | KIT, 4380A-ACAC-TS CALIBRATED, ANTENNA, LIGHTNING ARRESTOR, 80M CABLE, Projected EOL: 2051-10-06 - Contact for Pricing | 0 | |||
| MCP1826S-1802E/DBVAO | Microchip Technology Inc | 1.0A LDO, SOT-223, Projected EOL: 2050-11-06 RoHS : Compliant |
| 0 | ||
 Bisco Industries | NAS1801-06-8 | Crescent Manufacturing | 1,425 | |||
| NAS1802-06-18P | Heartland Precision Fasteners Inc | 1,421 | ||||
| NAS1802-4-16 | NAS HEX CAP SCREWS | 500 | ||||
| NAS1802-3-64 | NAS HEX CAP SCREWS | 192 | ||||
| NAS1801-06-8 | Mac Fastteners Inc | 153 | ||||
| NAS1802-4-10P | NAS Screws | 44 | ||||
| MS18029-21 | R&B Electronics | 26 | ||||
| MS18029-1S-8 | Marco | 25 | ||||
| NAS1801-08-10 | NAS HEX CAP SCREWS | 17 | ||||
| NAS1801-5-9 | NAS Screws | 10 | ||||
| NAS1802-6-50 | NAS HEX CAP SCREWS | 8 | ||||
| MS18029-6S-3 | MS Miscellaneous | 5 | ||||
| MS18029-1S-8 | MS Miscellaneous | 4 | ||||
| NAS1802-3-44 | NAS HEX CAP SCREWS | 4 | ||||
| NAS1802-06-7 | Heartland Precision Fasteners Inc | 1 | ||||
 Rochester Electronics | NCP163AFCS180T2G | onsemi | Fixed Positive LDO Regulator, 1.8V, 0.25V Dropout, PBGA4 RoHS : Compliant |
| 1,129,275 | |
SN65LVDS180D | Texas Instruments | IC INTERFACE Transceiver LVDS 150Mbps, 400Mbps 3V - 3.6V 14-SOIC Tube RoHS : Compliant |
| 5,886 | ||
SN74AS1805N | Texas Instruments | NOR Gate, AS Series, 6-Func, 2-Input, TTL, PDIP20 RoHS : Not Compliant |
| 477 | ||
SN65LVDS180PWRQ1 | Texas Instruments | IC INTERFACE Transceiver LVDS 400Mbps 3V - 3.6V 14-SOP T/R RoHS : Compliant |
| 14,918 | ||
EP2S180F1508C4 | Altera Corporation | Field Programmable Gate Array, 71760 CLBs, 717MHz, 179400-Cell, CMOS, PBGA1508 RoHS : Not Compliant |
| 30 | ||
| EP2S180F1020C3N | Altera Corporation | Field Programmable Gate Array, 8970 CLBs, 717MHz, 179400-Cell, CMOS, PBGA1020 RoHS : Compliant |
| 5 | ||
| EP2S180F1020C4 | Altera Corporation | Field Programmable Gate Array, 71760 CLBs, 717MHz, 179400-Cell, CMOS, PBGA1020 RoHS : Not Compliant |
| 2 | ||
| EP2S180F1020C4N | Altera Corporation | Field Programmable Gate Array, 71760 CLBs, 717MHz, 179400-Cell, CMOS, PBGA1020 RoHS : Compliant |
| 4 | ||
| EP2S180F1508C5 | Altera Corporation | Field Programmable Gate Array, 71760 CLBs, 640MHz, 179400-Cell, CMOS, PBGA1508 RoHS : Not Compliant |
| 1,030 | ||
ABLS-18.000MHZ-B4-T | Abracon Corporation | CRYSTAL 18MHz ±30ppm ±50ppm HC-49 T/R RoHS : Compliant |
| 1,000 | ||
FLS1800XS | Fairchild Semiconductor Corporation | 260W - Half-Bridge LLC Resonant Control IC for Lighting RoHS : Compliant |
| 1,926 | ||
| DS1801E-014+TR | Maxim Integrated Products | DS1801 Dual Audio Taper Potentiometer RoHS : Compliant |
| 65 | ||
| DS1801E-02V/T&R | Maxim Integrated Products | DS1801 Dual Audio Taper Potentiometer RoHS : Not Compliant |
| 1,000 | ||
| DS1805Z-10 | Maxim Integrated Products | DS1805 Addressable Digital Potentiometer RoHS : Not Compliant |
| 25 | ||
DS1809-050 | Maxim Integrated Products | Digital Potentiometer RoHS : Not Compliant |
| 2,831 | ||
 Sager | MTLW-101-06-S-S-180 | Samtec Inc | Headers & Wire Housings .100 Low Profile Variable Post Height Terminal Strip RoHS : Compliant |
| 2,591 | |
| TW-02-02-G-S-180-100 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Surface Mount Board Stacking Header, 2.00 mm Pitch RoHS : Compliant |
| 1,564 | ||
| MTSW-106-07-T-S-180 | Samtec Inc | Headers & Wire Housings Variable Height PCB Header Strips, 0.100 pitch RoHS : Compliant |
| 1,328 | ||
| MTMM-150-05-G-S-180 | Samtec Inc | Headers & Wire Housings Variable Post Height Header Strips, 2.00 mm Pitch RoHS : Compliant |
| 186 | ||
| MTMM-125-04-F-S-180 | Samtec Inc | Headers & Wire Housings Variable Post Height Header Strips, 2.00 mm Pitch RoHS : Compliant |
| 0 | ||
| MTSW-105-24-L-S-180-RA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-106-06-G-S-180 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-109-24-T-S-180-RA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-112-24-T-S-180 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-112-24-T-S-180-RA | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MMSS-06-24-S-18.00-S-K | Samtec Inc | Rectangular Cable Assemblies Mini-Mate Cable Assembly, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| MTLW-101-05-F-S-180 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTLW-102-06-T-S-180 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTMM-110-07-G-S-180 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTMM-112-04-F-S-180 | Samtec Inc | Headers & Wire Housings RoHS : Compliant |
| 0 | ||
 Coilcraft Direct | 1008CS-180XGRC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 18,554 | |
| 0805CS-180XGLC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS RoHS : Compliant |
| 7,294 | ||
| 0805CS-180XGEC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS, halogen-free RoHS : Compliant |
| 7,294 | ||
| 0805HS-180TJLC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 4,045 | ||
| 1206CS-180XJLC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 2,793 | ||
| 1206CS-180XJEC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS, Halogen Free RoHS : Compliant |
| 2,793 | ||
| 1008CS-180XJEC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 2,630 | ||
| 1008CS-180XJLC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 2,630 | ||
| 1206CS-180XGEC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS, Halogen Free RoHS : Compliant |
| 2,385 | ||
| 1206CS-180XGLC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS RoHS : Compliant |
| 2,385 | ||
| 1008CS-180XGEC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 1,884 | ||
| 1206CS-180XGRC | Coilcraft Inc | RF inductor, ceramic core, 2% tol, SMT, RoHS, Halogen Free RoHS : Compliant |
| 330 | ||
| 1008CS-180XJRC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS Halogen Free RoHS : Compliant |
| 0 | ||
| 1008HS-180TJLC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
| 0805HS-180TJRC | Coilcraft Inc | RF inductor, ceramic core, 5% tol, SMT, RoHS RoHS : Compliant |
| 0 | ||
 TME | MOF1WS-180K | SR Components Inc | Resistor: metal oxide; 180kΩ; THT; 1W; ±5%; 350V; Ø0.6x26mm; axial |
| 1,020 | |
| ZRS-180 | 4Carmedia | Connector; ISO; Fiat,Mazda,Nissan,Opel,Renault,Subaru; PIN: 20 |
| 106 | ||
| ZP10S1800W | ZETTLER Magnetics Inc | Converter: AC/DC; 10W; Uin: 85÷265VAC,100÷370VDC; Uout: 18VDC; 72% |
| 0 | ||
| ZP05S1800WB | ZETTLER Magnetics Inc | Converter: AC/DC; 5W; Uin: 85÷265VAC,100÷370VDC; Uout: 18VDC; OUT: 1 |
| 0 | ||
| ZP03S1800WE | ZETTLER Magnetics Inc | Converter: AC/DC; 3W; Uin: 85÷265VAC,100÷370VDC; Uout: 18VDC; OUT: 1 |
| 0 | ||
| ZPL20S1800WL-1SF | ZETTLER Magnetics Inc | Converter: AC/DC; 20W; Uin: 90÷264VAC,100÷370VDC; Uout: 18VDC; 85% |
| 0 | ||
| ZPL15S1800WL-1SF | ZETTLER Magnetics Inc | Converter: AC/DC; 15W; Uin: 90÷264VAC,100÷370VDC; Uout: 18VDC; 83% |
| 0 | ||
| 1150BM-HS/180 | Beta Electric | Pliers: universal; for gripping and cutting; 180mm |
| 0 | ||
SN65ALS180DR | Texas Instruments | IC: interface; receiver,driver; full duplex,RS422 / RS485; SO14 RoHS : Compliant |
| 0 | ||
GCS180PS15 | XP Power | Power supply: switching; open; 180W; 85÷264VAC; OUT: 1; 15VDC; 10A RoHS : Compliant |
| 0 | ||
| AHDMBS-18-001 | Amphenol Corporation | Connector: automotive RoHS : Compliant |
| 0 | ||
| HCMS-12-S-18.00-02 | Samtec Inc | Ribbon cable with IDC connectors; IDC plug,cables; PIN: 1x12 RoHS : Compliant |
| 0 | ||
| ZPL15S1800WS-0SF | ZETTLER Magnetics Inc | Converter: AC/DC; 15W; Uin: 90÷305VAC,120÷430VDC; Uout: 18VDC; 83% |
| 0 | ||
| ZPI03S1800WC | ZETTLER Magnetics Inc | Converter: AC/DC; 3W; Uin: 90÷264VAC,100÷370VDC; Uout: 18VDC; OUT: 1 |
| 0 | ||
| ZPL20S1800WS-0SF | ZETTLER Magnetics Inc | Converter: AC/DC; 20W; Uin: 90÷305VAC,120÷430VDC; Uout: 18VDC; 85% |
| 0 | ||
 Ameya Holding Limited | SN65LVDS180PWR | Texas Instruments | IC DIFF LINE DVR/RCVR HS 14TSSOP RoHS : Compliant | 36,547 | ||
| SN65LVDS180DR | Texas Instruments | IC DIFF LINE DVR/RCVR HS 14-SOIC RoHS : Compliant | 30,890 | |||
| SN65LVDS180PWRQ1 | Texas Instruments | IC DRVR/RCR LINE DIFF HS 14TSSOP RoHS : Compliant | 21,463 | |||
| SN65LVDS180D | Texas Instruments | IC HS DIFF LINEDRVR/RCVR 14-SOIC RoHS : Compliant | 17,738 | |||
| MCS1800-GS-12-Z | Monolithic Power Systems | 8,721 | ||||
| UFS180JE3/TR13 | Microchip Technology Inc | DIODE GEN PURP 800V 1A DO214BA RoHS : Compliant | 2,748 | |||
| UFS180J/TR | Microchip Technology Inc | 2,170 | ||||
| KG-SUS180S3/64GJ | Kingston Technology Company | 306 | ||||
| DS1804Z-010+ | Analog Devices Inc | Hong Kong RoHS : Compliant | 100 | |||
| DS1804Z-050+ | Analog Devices Inc | DS1804 Series 100 Tabs Up-Down/Increment Control 50 kOhm Digital POT - SOIC-8 RoHS : Compliant | 100 | |||
| DS1804Z-010+T&R | Analog Devices Inc | DS1804 Series 100 Step 10kOhm Non-Volatile Trimmer Potentiometer - SOIC-8 RoHS : Compliant | 45 | |||
 ComSIT USA | 600S180FT250XT | AMERICAN TECHNICAL CERAMICS/AVX/KYOCERA AVX | AVAILABLE EU | 1,496 | ||
ComSIT USA | RG1V226M05011CS180 | Samwha Electronics | Aluminum electrolytic capacitor, 22uF, 50V, radial, Samwha RoHS : Not Compliant | 4,000 | ||
| 8T73S1802NLGIW | Integrated Device Technology Inc | 1:2 CLOCK FANOUT BUFFER AND FREQUENCY DIVIDER Low Skew Clock Driver, 8T Series, 3 True Output(s), 0 Inverted Output(s) RoHS : Compliant | 2,500 | |||
| DS1803Z010+TR | Maxim Integrated Products | Pot Digital 2 Element 256 POS 10 kOhm 2.7V �20% 16-SOIC T/R RoHS : Compliant | 1,710 | |||
| SN65ALS180DR | Texas Instruments | DIFFERENTIAL DRIVER AND RECEIVER PAIR Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO14 RoHS : Not Compliant | 1,330 | |||
| DS1807S | Dallas Semiconductor | ADDRESSABLE DUAL AUDIO TAPER POTENTIOMETER Digital Potentiometer, 2 Func, 45000ohm, 2-wire Serial Control Interface, 65 Positions, CMOS, PDSO16 RoHS : Not Compliant | 445 | |||
| FK20S1802V | fct | MACHINED CONTACT FOR CRIMP CONNECTOR Connector Accessory, Contact, Copper Alloy RoHS : Compliant | 300 | |||
| DS1804L+ | Maxim Integrated Products | Electronic Component RoHS : Compliant | 222 | |||
DS1802S+ | Maxim Integrated Products | Pot Digital 2 Element 65 POS 45 kOhm 2.7V �20% 20-SOIC Tube RoHS : Compliant | 214 | |||
Z8S18020VSC | Zilog Inc | ENHANCED MICROPROCESSOR WITH FASTER EXECUTION, POWER-SAVER MODE, LOW EMI Microprocessor, 8-Bit, 20MHz, CMOS, PQCC68 RoHS : Not Compliant | 112 | |||
| DS1801+ | Dallas Semiconductor | Digital Potentiometer 45kOhm 64POS Volatile Log 14-Pin PDIP N Tube RoHS : Compliant | 63 | |||
| 3146110828S1808456HC | Electro Adapter Inc | Electronic Component RoHS : Not Compliant | 20 | |||
| 75ALS180D | Texas Instruments | DIFFERENTIAL DRIVER AND RECEIVER PAIR Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BIPolar, PDSO14 RoHS : Compliant | 15 | |||
| EP2S180F1020C4N | Altera Corporation | STRATIX II FPGA Field Programmable Gate Array, 71760 CLBs, 717MHz, 179400-Cell, CMOS, PBGA1020 RoHS : Compliant | 5 | |||
| EP2S180F1020C4 | al | STRATIX II FPGA Field Programmable Gate Array, 71760 CLBs, 717MHz, 179400-Cell, CMOS, PBGA1020 RoHS : Not Compliant | 1 | |||
| EP2S180F1020I4 | Altera Corporation | STRATIX II FPGA Field Programmable Gate Array, 71760 CLBs, 717MHz, 179400-Cell, CMOS, PBGA1020 RoHS : Not Compliant | 1 | |||
 Interstate Connecting Components | ATBS-PS-1805 | Amphenol Sine Systems | BACKSHELL FOR 18 AND 15 POSIT ACCESSORIES |
| 131 | |
| AHDMBS-18-002 | Amphenol Sine Systems | BK SHL,SZ18,2 PC AHDM SERIES |
| 4 | ||
| 797-734S180P8MS-489 | Glenair Inc | 0 | ||||
| 983-0RS 18-08 S9 L | TE Connectivity | 983-0RS 18-08 S9 L | 0 | |||
| 983-6RS 18-02 PN-L A13 | TE Connectivity | 983-6RS 18-02 PN-L-A1325 | 0 | |||
| MS18062C40 | Amphenol Aerospace | SHELL, DUMMY | 0 | |||
| AHDPBS-18-001 | Amphenol Sine Systems | BACKSHELL,WTA, SHELL SIZE 18 W DURAMATE |
| 0 | ||
| M83723/85S18089 L/C | Conesys | JAM NUT RECEPT, PIN, 83723 SIII THREADED |
| 0 | ||
| M83723/84S1808N L/C | Conesys | JAM NUT RECEPT, SOCKET, 83723 SIII THREA |
| 0 | ||
| 85337ES1808PN | SOURIAU-SUNBANK | 0 | ||||
| 983-6RS 18-08 P9 L | TE Connectivity | 983-6RS 18-08 P9 L | 0 | |||
| M83723/97S18086 L/C | Conesys | SELF LOCK, RFI PLUG, SOCKET, 83723 SIII |
| 0 | ||
| YS1801500000G | Amphenol Anytek | YS-5.0- 29P GREEN - ZINC CON | 0 | |||
| MS18062N24 | Amphenol Aerospace | 22992 SHELL, DUMMY | 0 | |||
| M83723/98S18088 L/C | Conesys | SELF LOCK RFI PLUG, PIN, 83723 SIII THRE |
| 0 | ||
 NexGen Digital | 1008CS-180KXBC | Coilcraft Inc | 1,991 | |||
| 0805CS180XJBC | Coilcraft Inc | 933 | ||||
| ATC600S180GT250 | American Technical Ceramics Corp | 82 | ||||
 PEI Genesis | AHDPBS-18-001 | Amphenol Sine Systems |
| 413 | ||
| 85337RS1808PN | SOURIAU-SUNBANK |
| 0 | |||
| AE83385S18087 | Aero-Electric Connector Inc |
| 0 | |||
| S1802-22-1.5-4 | SOURIAU-SUNBANK |
| 0 | |||
| S1802-28-1.0-34 | SOURIAU-SUNBANK |
| 0 | |||
| S1802-42-1.0-34 | SOURIAU-SUNBANK |
| 0 | |||
| AE83398S1808Y | Aero-Electric Connector Inc |
| 0 | |||
| AHDMBS-18-002 | Amphenol Sine Systems |
| 0 | |||
| 06A1009S1806CN3-6 | SOURIAU-SUNBANK |
| 0 | |||
| 03A1015S1809CN6-109 | SOURIAU-SUNBANK |
| 0 | |||
| 85330KS1808SN | SOURIAU-SUNBANK |
| 0 | |||
| S1802-04-1.5-12 | SOURIAU-SUNBANK |
| 0 | |||
| S1802-10-3.0-34 | SOURIAU-SUNBANK |
| 0 | |||
| S1802-13-1.5-12 | SOURIAU-SUNBANK |
| 0 | |||
| 06A1001S1808N3-114 | SOURIAU-SUNBANK |
| 0 | |||
 Powell Electronics | AHDMBS-18-002 | Amphenol Sine Systems | Backshell Size 18 AHDM Series 2 pc |
| 4,422 | |
| ATBS-PS-1805 | Amphenol Sine Systems | 18 Pos Backshell |
| 4,158 | ||
| MTLW-101-06-S-S-180 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 1,710 | ||
| TW-02-02-G-S-180-100 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 1,032 | ||
| MTMM-103-04-S-S-180 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 1,014 | ||
| MTMM-103-03-L-S-180 | Samtec Inc | PCB Header, 2.00mm Pitch, SMT, Male, Mal RoHS : Compliant |
| 1,014 | ||
| TW-02-11-T-S-180-095 | Samtec Inc | Flexible Board Stacking Header, 2.00mm P RoHS : Compliant |
| 917 | ||
| MTSW-106-07-T-S-180 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 876 | ||
| AHDPBS-18-001 | Amphenol Sine Systems | Shell Sz 18 Backshell WTA |
| 500 | ||
| MTSW-103-07-S-S-180-LL | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 478 | ||
| MTMM-108-05-G-S-180 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 436 | ||
| HMTMS-108-51-S-S-180 | Samtec Inc | .050" x .100" High-Temp Variable Post He RoHS : Compliant |
| 253 | ||
| MTSW-120-07-S-S-180 | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 244 | ||
| HMTSW-108-08-TM-S-180-RA | Samtec Inc | .100" High-Temp Variable Post Height Ter RoHS : Compliant |
| 168 | ||
| MTMM-150-05-G-S-180 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 123 | ||
 Richardson RFPD | 600S180FT250XT | Kyocera AVX Components | Cap Ceramic 18pF 250V C0G 1% Pad SMD 0603 125C Ult RoHS : Compliant |
| 1,000 | |
| 600S180FW250XT\\4K | Kyocera AVX Components | Multilayer Ceramic Chip RF and Microwave Capacitor | 0 | |||
| CCT-38S180 | Teledyne Relays | RF Switch SP8T 0MHz to 12GHz 60dB RoHS : Compliant |
| 0 | ||
| TS180M-25W | Spectrum Control | Terminations Sma, Up To 18 Ghz, 25Watts RoHS : Compliant |
| 0 | ||
| TS180F | Spectrum Control | Conn SMA Terminator 0Hz to 18GHz 50Ohm ST F Gold RoHS : Compliant |
| 0 | ||
| R-78S1.8-0.1 | RECOM Power GmbH | Module DC-DC 1-OUT 1.8V to 3.6V 4-Pin SIP Module T RoHS : Compliant |
| 0 | ||
| 600S180JT250XT | Kyocera AVX Components | Cap Ceramic 18pF 250V C0G 5% Pad SMD 0603 125C Ult RoHS : Compliant | 0 | |||
| TS180F-50W | Spectrum Control | RF COAX TERMINATION RoHS : Compliant |
| 0 | ||
| TS180FC | Spectrum Control | Terminations Sma, Up To 26.5 Ghz, 1Watt RoHS : Compliant |
| 0 | ||
| 600S180KT250XT | Kyocera AVX Components | Cap Ceramic 18pF 250V C0G 10% Pad SMD 0603 125C Ul RoHS : Compliant | 0 | |||
| 600S180FT250X | Kyocera AVX Components | MULTILYRCERAMIC CAP RoHS : Compliant | 0 | |||
| 600S180FT250T4K | Kyocera AVX Components | Cap Ceramic 18pF 250V C0G 1% Pad SMD 0603 125C T/R RoHS : Compliant | 0 | |||
| CCR-38S180 | Teledyne Relays | RF Switch SP8T 0MHz to 12GHz 60dB RoHS : Compliant |
| 0 | ||
| TS180M-10W | Spectrum Control | Terminations Sma, Dc - 18 Ghz, 10Watts RoHS : Compliant |
| 0 | ||
| 600S180JT250X | Kyocera AVX Components | MULTILYRCERAMIC CAP RoHS : Compliant | 0 | |||
 Chip 1 Exchange | RL1220S-180-F | INSTOCK | 75,238 | |||
| MF60SS-180F-A5 | ASJ Holdings Limited | INSTOCK | 10,000 | |||
| 1008CS-180XKBC | Coilcraft Inc | INSTOCK | 1,825 | |||
SN75ALS180DR | Texas Instruments | INSTOCK RoHS : Compliant | 1,524 | |||
| SN65ALS180DR | Texas Instruments | INSTOCK RoHS : Compliant | 818 | |||
| 103318050 1/2-S 180R | INSTOCK | 800 | ||||
| LS1808N102K302NXTM | Texas Instruments | INSTOCK | 500 | |||
| 0805CS-180XGLC | INSTOCK | 433 | ||||
| 251R14S180JV4T | INSTOCK | 325 | ||||
| SN75ALS180D | Texas Instruments | INSTOCK RoHS : Compliant | 300 | |||
| SN74AS1805N | INSTOCK | 172 | ||||
| 28S18020VSG | Zilog Inc | INSTOCK | 114 | |||
| LS1808N221K302NTM | Novacap | INSTOCK RoHS : Compliant | 50 | |||
Z8S18020FSC | Zilog Inc | INSTOCK RoHS : Not Compliant | 48 | |||
| DWDM28DTANS18-001 | Viavi Solutions Inc | INSTOCK | 1 | |||
 Avnet Abacus | ATBS-PS-1805 | Amphenol Corporation | Backshell for T1618PSX and AT1615PSX Series 1518 Position HeavyDuty Connectors 18 Shell Size ST Thermoplastic (Alt: ATBS-PS-1805) RoHS : Compliant | 1,050 | ||
| DZ2S180M0L | Panasonic Electronic Components | ZENER DIODE SINGLE VOLTAGE REGULATION VZ18V (Alt: DZ2S180M0L) RoHS : Compliant | 0 | |||
| 16SVPS180M | Panasonic Electronic Components | Polymer Aluminium Electrolytic Capacitor 180 uF 16 V Radial Can SMD 0029 ohm - Tape and Reel (Alt: 16SVPS180M) RoHS : Compliant | 0 | |||
| AHDPBS-18-001 | Amphenol Corporation | (Alt: AHDPBS-18-001) RoHS : Compliant | 0 | |||
| AHDMBS-18-002 | Amphenol Corporation | (Alt: AHDMBS-18-002) RoHS : Compliant | 0 | |||
| YS1801500000G | Amphenol Corporation | (Alt: YS1801500000G) RoHS : Compliant | 0 | |||
| TRS1-80BPR001 | KEMET Corporation | Thermal Reed Switch 80 C Break Contact Screw Mount (Alt: TRS1-80BPR001) RoHS : Compliant | 0 | |||
| NPIS84LS180MTRF | NIC Components Corp | - Tape and Reel (Alt: NPIS84LS180MTRF) RoHS : Compliant | 0 | |||
| TPSA475M020S1800 | Kyocera AVX Components | - Tape and Reel (Alt: TPSA475M020S1800) RoHS : Compliant | 0 | |||
| TISP4S180M3BJR-S | Bourns Inc | Thyristor TSPD 140V 50A 2Pin DO214AA Embossed TR (Alt: TISP4S180M3BJR-S) RoHS : Not Compliant | 0 | |||
| S180J25SL0N63J5R | Vishay Intertechnologies | (Alt: S180J25SL0N63J5R) RoHS : Compliant | 0 | |||
CS1808KKX7RZBB103.jpg) | YAGEO Corporation | SMD Multilayer Ceramic Capacitor 001 uF 630 V 1808 4520 Metric 10 X7R CS Series 45 mm (Alt: CS1808KKX7RZBB103) RoHS : Compliant | 0 | |||
| AECS1806C03ZS-3000S | Abracon Corporation | External Antenna Shark Fin Multi Band 1561GHz 1602GHz 171GHz 269GHz 49GHz 5825GHz (Alt: AECS1806C03ZS-3000S) RoHS : Compliant | 0 | |||
| ABLS-18.000MHZ-B4-T | Abracon Corporation | Crystal Standard 18 MHz SMD 115mm x 47mm x 42mm 50 ppm 18 pF 30 ppm ABLS - Tape and Reel (Alt: ABLS-18.000MHZ-B4-T) RoHS : Compliant | 0 | |||
| AECS1806D07ZS-3000S | Abracon Corporation | External Antenna Shark Fin Multi Band 76MHz108MHz 1561GHz 1602GHz 171GHz 269GHz (Alt: AECS1806D07ZS-3000S) RoHS : Compliant | 0 | |||
Avnet Asia | 251R14S180JV4T | Johanson Technology Inc | Cap Ceramic 18pF 250V C0G 5% SMD 0603 125?C Paper T/R (Alt: 251R14S180JV4T) RoHS : Compliant | 0 | ||
| CCS-180719-01-MP | Samtec Inc | SATCCS-180719-01-MP CUSTOM HDR COMPONENT (Alt: CCS-180719-01-MP) RoHS : Compliant | 0 | |||
| 16SVPS180M | Panasonic Electronic Components | Polymer Aluminium Electrolytic Capacitor, 180 uF, 16 V, Radial Can - SMD, 0.029 ohm (Alt: 16SVPS180M) RoHS : Compliant | 0 | |||
| NCP161AFCS180T2G | onsemi | LDO Regulator, 450 mA, Ultra-High PSRR, Ultra-Low Noise 1.8V, Active Discharge. (Alt: NCP161AFCS180T2G) RoHS : Compliant | 0 | |||
| NCP163AFCS180T2G | onsemi | LDO Regulator, 250 mA, Ultra-High PSRR, Ultra-Low Noise 1.8 V, Active Discharge. (Alt: NCP163AFCS180T2G) RoHS : Compliant | 0 | |||
 Avnet Silica | UFS180JE3/TR13 | Microchip Technology Inc | (Alt: UFS180JE3/TR13) RoHS : Compliant | 0 | ||
| EV10AS180GS-EB | Teledyne HiRel | Evaluation Board EV10AS180GS ADC (Alt: EV10AS180GS-EB) RoHS : Compliant | 0 | |||
| MCS1803GS-20-P | Monolithic Power Systems | Hall EffectBased Linear Current Sensor IC 20A 100mVA 100kHz 8Pin SOIC (Alt: MCS1803GS-20-P) RoHS : Compliant | 0 | |||
| MCS1801GS-25-Z | Monolithic Power Systems | (Alt: MCS1801GS-25-Z) RoHS : Compliant | 0 | |||
| EV10AS180AMGC-V | Teledyne HiRel | Analog to Digital Converter 10 bit Pipelined 15 GSPS Differential Single Ended LVDS (Alt: EV10AS180AMGC-V) RoHS : Compliant | 0 | |||
| NCP163AFCS180T2G | onsemi | LDO Regulator 250 mA UltraHigh PSRR UltraLow Noise 18 V Active Discharge ONSSPCLDO (Alt: NCP163AFCS180T2G) RoHS : Compliant | 0 | |||
| MCS1806GS-3-30-Z | Monolithic Power Systems | Current Sensor 25 30A 100kHz 8Pin SOIC TR (Alt: MCS1806GS-3-30-Z) RoHS : Compliant | 0 | |||
| MCS1806GS-3-05-P | Monolithic Power Systems | Current Sensor SOIC 8 Pins (Alt: MCS1806GS-3-05-P) RoHS : Compliant | 0 | |||
| MCS1806GS-3-50-P | Monolithic Power Systems | Current Sensor SOIC 8 Pins (Alt: MCS1806GS-3-50-P) RoHS : Compliant | 0 | |||
| MCP1826S-1802E/AB | Microchip Technology Inc | (Alt: MCP1826S-1802E/AB) RoHS : Compliant | 0 | |||
| MCS1805GS-330-U-Z | Monolithic Power Systems | Current Sensor IC Hall Effect Linear 30 A 3 V 36 V 8 Pins SOIC (Alt: MCS1805GS-330-U-Z) RoHS : Compliant | 0 | |||
| MCP1826S-1802E/DB | Microchip Technology Inc | (Alt: MCP1826S-1802E/DB) RoHS : Compliant | 0 | |||
| MCS1805GS-320-B-P | Monolithic Power Systems | Current Sensor Hall Effect Linear Bidirectional 25 SOIC 8 Pins (Alt: MCS1805GS-320-B-P) RoHS : Compliant | 0 | |||
| CS18047_HB-IP-24-M | LEDIL | LED Lighting Multi Lens 30 Wide Beam PMMA 173mm x 714mm x 10mm Box (Alt: CS18047_HB-IP-24-M) RoHS : Compliant | 0 | |||
| CS18056_VICTORIA-MINI-WWW-PC | LEDIL | LED Lens Cover 90 Wide Beam Polycarbonate 180mm x 108mm Box (Alt: CS18056_VICTORIA-MINI-WWW-PC) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | AECS1806C03ZS-3000S | Abracon Corporation | 3IN1 LTE/GNSS/WIFI EXT SHARKFIN RoHS : Compliant |
| 0 | |
| ABLS-18.000MHZ-B4-T | Abracon Corporation | CRYSTAL 18.0000MHZ 18PF SMD RoHS : Unknown |
| 0 | ||
| CFM600S180F-R | Cincon Electronics Corporation | ITE/Industrial Open Frame Baseplate-cooled Power Supply |
| 0 | ||
AMPLA7030S-180MT | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AECS1806D07ZS-3000S | Abracon Corporation | 4IN1 LTE MIMO/GNSS/AMFM SHARKFIN RoHS : Compliant |
| 0 | ||
| AISC-1210HS-180K-T2 | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| CFM400S180 | Cincon Electronics Corporation | OPEN FRAME AC-DC MODULES RoHS : Compliant |
| 0 | ||
| CFM600S180-PC | Cincon Electronics Corporation | ITE/Industrial Open Frame Baseplate-cooled Power Supply |
| 0 | ||
| CFM500S180 | Cincon Electronics Corporation | AC-DC AC-DC MODULES RoHS : Compliant |
| 0 | ||
ASPI-4030S-180M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASPI-8040S-180M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
ASPI-1207S-180M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| CFM600S180-R | Cincon Electronics Corporation | ITE/Industrial Open Frame Baseplate-cooled Power Supply |
| 0 | ||
ASPI-0602S-180M-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AMELH6060S-180MT | Abracon Corporation | RoHS : Compliant |
| 0 | ||
 Component Electronics, Inc | ECS-180-20-5P-TR | ECS International Inc | IN STOCK SHIP TODAY |
| 5,000 | |
| 0805CS-180XJLC | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 4,706 | ||
| 1008CS-180XJLC | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 1,750 | ||
| DS1803Z-010-T/R | Dallas Semiconductor | IN STOCK SHIP TODAY |
| 1,510 | ||
| EGS-1-80-22.6R-1% | Vishay Dale | IN STOCK SHIP TODAY |
| 247 | ||
| 0805CS-180XGBC | Coilcraft Inc | IN STOCK SHIP TODAY RoHS : Not Compliant | 150 | |||
| MCP1825S-1802E/DB | Microchip Technology Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 110 | ||
| EGS-1-80-649R-1% | Vishay Dale | IN STOCK SHIP TODAY |
| 100 | ||
| EGS-1-80-.732-1%B12 | Vishay Intertechnologies | IN STOCK SHIP TODAY |
| 100 | ||
| LS1808N102K302NX | Novacap | IN STOCK SHIP TODAY |
| 33 | ||
| SN75ALS180D | Texas Instruments | IN STOCK SHIP TODAY RoHS : Compliant |
| 22 | ||
| BM90-220S18-00 | Enargy Power Corporation | IN STOCK SHIP TODAY |
| 4 | ||
| MTLW-140-05-S-S-180 | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 4 | ||
| Z8S18020VSG | Zilog Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 3 | ||
| MP2-S180-51P1-TR30 | 3M | IN STOCK SHIP TODAY | 3 | |||
 DB Roberts | NAS1801-04-5 | Military Specifications |
| 12,822 | ||
| NAS1801-06-16 | Military Specifications |
| 925 | |||
| NAS1801-3-10 | Military Specifications |
| 272 | |||
| NAS1802-06-8 | Military Specifications |
| 53 | |||
| NAS1802-3-30 | Military Specifications |
| 20 | |||
| S-180-12 | Shercon Inc | 250 PER BOX |
| 4 | ||
| MSCBS-18-01 | Essentra Components | CB SptThrd MLMtrcNat1-1/8 in Spc | 0 | |||
| S-180-14 | Shercon Inc | 250 PER BOX | 0 | |||
| RS-1809-0437 | Heyco | RS 0187 OD X091 ID X437 LG NAT | 0 | |||
| BOS-180 | Sugatsune Kogyo Co Ltd | 0 | ||||
| FLCBS-18-01 | Essentra Components | CB SptFlexibleNatural1-1/8 in Spc CB Spt Flexible Natural | 0 | |||
| S-180-24 | Shercon Inc | 250/BAG | 0 | |||
| RS-1809-0125 | Heyco | RS 0187 OD X091 ID X125 LG NAT | 0 | |||
| RS-1809-0562 | Heyco | RS 0187 OD X091 ID X562 LG NAT | 0 | |||
| RS-1809-0250 | Heyco | RS 0187 OD X091 ID X250 LG NAT | 0 | |||
 EBV Elektronik | SS18-0B00-00 | Broadcom Limited | Switch Fabric SMT PCIe PEX9700 Series 33 Lanes 9 Ports 2 HotPlug Controllers (Alt: SS18-0B00-00) RoHS : Compliant | 0 | ||
| UFS180JE3/TR13 | Microchip Technology Inc | (Alt: UFS180JE3/TR13) RoHS : Compliant | 0 | |||
| VS-180NQ045PBF | Vishay Intertechnologies | Modules Rectifiers HALFPAK SK (Alt: VS-180NQ045PBF) RoHS : Compliant | 0 | |||
| NCP163AFCS180T2G | onsemi | LDO Regulator 250 mA UltraHigh PSRR UltraLow Noise 18 V Active Discharge ONSSPCLDO (Alt: NCP163AFCS180T2G) RoHS : Compliant | 0 | |||
| SQS180ENW-T1_GE3 | Vishay Intertechnologies | Automotive NChannel 40 V DS 175C MOSFET PowerPAK 12128SLW (Alt: SQS180ENW-T1_GE3) RoHS : Compliant | 0 | |||
| NCP161AFCS180T2G | onsemi | LDO Regulator 450 mA UltraHigh PSRR UltraLow Noise 18V Active Discharge ONSSPCLDO (Alt: NCP161AFCS180T2G) RoHS : Compliant | 0 | |||
| MCP1826S-1802E/AB | Microchip Technology Inc | (Alt: MCP1826S-1802E/AB) RoHS : Compliant | 0 | |||
| MCP1826S-1802E/DB | Microchip Technology Inc | (Alt: MCP1826S-1802E/DB) RoHS : Compliant | 0 | |||
| MCP1825S-1802E/DB | Microchip Technology Inc | LDO Regulator Pos 18V 05A 4Pin3Tab SOT223 Tube (Alt: MCP1825S-1802E/DB) RoHS : Compliant | 0 | |||
| SQS180ELNW-T1_GE3 | Vishay Intertechnologies | (Alt: SQS180ELNW-T1_GE3) RoHS : Compliant | 0 | |||
| CS18047_HB-IP-24-M | LEDIL | LED Lighting Multi Lens 30 Wide Beam PMMA 173mm x 714mm x 10mm Box (Alt: CS18047_HB-IP-24-M) RoHS : Compliant | 0 | |||
| CS18048_HB-IP-24-W | LEDIL | LED Lens Cover 60 Wide Beam PMMA 173mm x 714mm x 10mm Box (Alt: CS18048_HB-IP-24-W) RoHS : Compliant | 0 | |||
| CS18049_HB-IP-24-WWW | LEDIL | MultiLens For Use With For Use With J Series 5050 Round LESLUXEON 5050 Square LESDuris S8SEOUL (Alt: CS18049_HB-IP-24-WWW) RoHS : Compliant | 0 | |||
| 6PS18012E4FG38393NWSA1 | Infineon Technologies AG | (Alt: SP001054242) RoHS : Not Compliant | 0 | |||
| CS18051_STRADA-IP-24-DWC | LEDIL | LED Lens Array 173mm x 71mm x 9mm Polycarbonate Box (Alt: CS18051_STRADA-IP-24-DWC) RoHS : Compliant | 0 | |||
 FDH Electronics | MS18029-21 | Marco | Terminals & Spl |
| 108 | |
| MS18029-6S-3 | R&B Electronics | Connector Acc |
| 27 | ||
| MS18029-1L5 | Arvan Inc | Backshells & Ac | 15 | |||
| MS18029-6S-14 | Marco | Connector Acc | 10 | |||
| S1802-42-3.5-34E | SOURIAU-SUNBANK | Backshells & Ac | 4 | |||
| MS18029-11S-11 | R&B Electronics | Connector Acc |
| 4 | ||
| MS18029-21 | Arvan Inc | Terminals & Spl |
| 2 | ||
| MS18029-21 | R&B Electronics | Wire and Cable | 0 | |||
| MS18029-6S-14 | R&B Electronics | Wire and Cable | 0 | |||
| 06A1024S1808CN5 | SOURIAU-SUNBANK | Backshells & Ac | 0 | |||
| MS18029-2S-6 | R&B Electronics | Connector Acc | 0 | |||
| MS18029-4L-1 | R&B Electronics | Connector Acc | 0 | |||
| HFW1201S180 | TE Connectivity | Relays RoHS : Not Compliant | 0 | |||
| MS18029-1L-8 | R&B Electronics | Wire and Cable | 0 | |||
| MS18029-4S-8 | R&B Electronics | Wire and Cable | 0 | |||
 Flip Electronics | NCP161AFCS180T2G | onsemi | Stock, Ship Today RoHS : Compliant | 200,000 | ||
| NCP160BFCS180T2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 160,000 | ||
| Z8S18020VSG1960 | Littelfuse Inc | Stock, Ship Today | 25,586 | |||
| NCP161BFCS180T2G | onsemi | Stock, Ship Today RoHS : Compliant |
| 4,885 | ||
| Z8S18020VEG00TR | Littelfuse Inc | Stock, Ship Today | 4,550 | |||
| Z8S18010VEG | Littelfuse Inc | Stock, Ship Today | 2,375 | |||
| Z8S18010FSG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 2,126 | |||
| Z8S18010VSG | Littelfuse Inc | Stock, Ship Today | 1,675 | |||
| Z8S18020FSG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 725 | |||
| Z8S18010FEG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 305 | |||
| Z8S18020VEG | Littelfuse Inc | Stock, Ship Today | 204 | |||
| Z8S18033FSG | Littelfuse Inc | Stock, Ship Today RoHS : Compliant | 161 | |||
| EP2S180F1020C3 | Altera Corporation | Stock RoHS : Not Compliant |
| 10 | ||
 Maritex | FPV160808S180PKT | Fenghua (HK) Electronics Ltd | Varistor SMD; 0603; 18VDC; 40pF RoHS : Compliant |
| 11,880 | |
| FPV201209S180PKT | Fenghua (HK) Electronics Ltd | Varistor SMD; 0805; 18VDC; 45pF RoHS : Compliant |
| 3,000 | ||
| EG-S180P24-2-V20W90 10W 6500K IP20 | NiViss | LED strip; Tile type; vertical&horizontal bending; cool white 6500K; CRI min. 90; 24V; 500x250 mm; 180LED/piece; 10 W; IP20; cut every 50mm/83.3mm; buttons entry; 0.5 m piece |
| 9 | ||
| IES-180B | Oring Industrial Networking Corp | Unmanaged Ethernet switch with 8x10/100Base-T(X); operating temperature -40+70 deg.C; DIN rail mountable |
| 3 | ||
 Master Electronics | 983-0S-18-02-SN-L | TE Connectivity | 983-0S 18-02 SN-L MOQ Reduction RoHS : Compliant |
| 0 | |
| MTMM-120-14-F-S-180 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-123-11-F-S-180 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-124-12-T-S-180 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-125-04-F-S-180 | Samtec Inc | 2.00 mm Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTMM-125-13-L-S-180 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-138-13-L-S-180 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-141-08-F-S-180 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-150-05-G-S-180 | Samtec Inc | 2.00 mm Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTSW-105-24-L-S-180-RA | Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTSW-106-06-G-S-180 | Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTSW-106-07-T-S-180 | Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTSW-109-24-T-S-180-RA | Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTSW-112-24-T-S-180 | Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTSW-112-24-T-S-180-RA | Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE3C0112/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600 Coax with HeatShrink., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C0112/HS-180 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C0112/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3C0112/HS-180 is built with LMR-600 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 634 | |
| PE3C0062/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600 Coax with HeatShrink., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C0062/HS-180 can also be known as a low loss N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3C0062/HS-180 is built with LMR-600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink. |
| 162 | ||
| PE3C0062LF/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and N type cable connection on the other. Our low loss type N to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C0062LF/HS-180 can also be known as a low loss N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C0062LF/HS-180 is built with LMR-600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 6 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 180 inch length using LMR-600 coax with heatshrink, LF solder. |
| 162 | ||
| PE3C10780/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-FR, RF Cable Type: LMR-600-FR, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. Fire Rated N Male to N Male Right Angle Low Loss Cable 180 Inch Length Using LMR-600-FR Coax with Times Microwave Components with HeatShrink., Pasternack’s PE3C10780/HS-180 low loss type N male to right angle type N male RF cable assembly using LMR-600-FR coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The type N male to type N male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3C10780/HS-180 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable’s inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10780/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. This PE3C10780/HS-180 type N plug to type N plug cable assembly is built with LMR-600-FR, which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications, and CAD drawings for this 180-inch-long low loss RF cable are available on our downloadable PDF datasheet. PE3C10780/HS-180 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. This low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems. |
| 160 | ||
| PE3C2603LF/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600 Coax with Times Microwave Components with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600 coax with Times Microwave components with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600 coax with Times Microwave components with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3C2603LF/HS-180 can also be known as a low loss type N plug to N type plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3C2603LF/HS-180 is built with LMR-600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 180 inch length using LMR-600 coax with Times Microwave components with heatshrink, LF solder. |
| 81 | ||
| PE3W17167/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-LW600, RF Cable Type: LMR-LW600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Right Angle Low Loss Cable 180 Inch Length Using LMR-LW600 Coax with HeatShrink., Radio frequency assembly N male to N male right angle low loss cable 180 inch length using LMR-LW600 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 180 inch length using LMR-LW600 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a right angle type N cable connection on the other. Our low loss type N to right angle type N cable assembly has a male gender on end 1 and a male on end 2. PE3W17167/HS-180 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17167/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to right angle type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W17167/HS-180 is built with LMR-LW600 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/solder attachment method and a brass body with tri-metal plating, while the other has the crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W17167/HS-180 can also be used in the other direction and will be a right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 64 | ||
| PE3W17710/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 4.3-10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-LW600, RF Cable Type: LMR-LW600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to 4.3-10 Male Low Loss Cable 180 Inch Length Using LMR-LW600 Coax with HeatShrink., Radio frequency assembly N male to 4.3-10 male low loss cable 180 inch length using LMR-LW600 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to 4.3-10 male low loss cable 180 inch length using LMR-LW600 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to 4.3-10 cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a 4.3-10 cable connection on the other. Our low loss type N to 4.3-10 cable assembly has a male gender on end 1 and a male on end 2. PE3W17710/HS-180 can also be known as a low loss type N plug to 4.3-10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and Foam PE dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W17710/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 85% and a minimum RF shielding of 90 dB. Our type N male to 4.3-10 male cable has a maximum VSWR of 1.4:1. Type N plug to 4.3-10 plug cable assembly PE3W17710/HS-180 is built with LMR-LW600 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to 4.3-10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W17710/HS-180 can also be used in the other direction and will be a 4.3-10 male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to 4.3-10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to 4.3-10 cable assembly for quick shipment worldwide. Variations of type N and 4.3-10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to 4.3-10 low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 32 | ||
| PE3W13564/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-UF, RF Cable Type: LMR-600-UF, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600-UF Coax With Times Microwave Components with HeatShrink., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600-UF coax with Times Microwave components with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600-UF coax with Times Microwave components with heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3W13564/HS-180 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to N type plug cable assembly PE3W13564/HS-180 is built with LMR-600-UF which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to N type male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 180 inch length using LMR-600-UF coax with Times Microwave components with heatshrink. |
| 0 | ||
| PE3W07880/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male Right Angle to N Male Low Loss Cable 180 Inch Length Using LMR-600-DB Coax with HeatShrink., Radio frequency assembly N male right angle to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male right angle to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a right angle type N cable connection on one end and a type N cable connection on the other. Our low loss right angle type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W07880/HS-180 can also be known as a low loss right angle type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W07880/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. Our right angle type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W07880/HS-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W07880/HS-180 can also be used in the other direction and will be a type N male to right angle type N male cable assembly if the opposite connectivity is required. Low loss type N right angle plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3W05445LF/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Female to N Female Low Loss Cable 180 Inch Length Using LMR-600-DB Coax with HeatShrink, LF Solder., Radio frequency assembly N female to N female low loss cable 180 inch length using LMR-600-DB coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N female to N female low loss cable 180 inch length using LMR-600-DB coax with heatshrink, LF solder, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a female gender on end 1 and female on end 2. PE3W05445LF/HS-180 can also be known as a low loss type N jack to type N jack cable assembly and will be shipped same-day as it is purchased. N type jack to type N jack cable assembly PE3W05445LF/HS-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type female to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N jack to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N female to N female low loss cable 180 inch length using LMR-600-DB coax with heatshrink, LF solder. |
| 0 | ||
| PE3C0050/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600, RF Cable Type: LMR-600, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Right Angle Low Loss Cable 180 Inch Length Using LMR-600 Coax with HeatShrink., Radio frequency assembly N male to N male right angle low loss cable 180 inch length using LMR-600 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 180 inch length using LMR-600 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and right angle type N cable connection on the other. Our low loss N type to right angle type N cable assemblies have a male gender on end 1 and male on end 2. PE3C0050/HS-180 can also be known as a low loss type N plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. N type plug to N type plug cable assembly PE3C0050/HS-180 is built with LMR-600 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C0050/HS-180 can also be used in the other direction and will be right angle type N male to type N male cable assembly if the opposite connectivity is required. Low loss N type plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle low loss cable 180 inch length using LMR-600 coax with heatshrink. |
| 0 | ||
| PE3W12421/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 7/16 DIN, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. 7/16 DIN Male to N Male Low Loss Cable 180 Inch Length Using LMR-600-DB Coax with HeatShrink., Radio frequency assembly 7/16 DIN male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The 7/16 DIN male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink, 7/16 DIN cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 7/16 DIN to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with 7/16 DIN cable connection on one end and type N cable connection on the other. Our low loss 7/16 DIN to N type cable assemblies have a male gender on end 1 and male on end 2. PE3W12421/HS-180 can also be known as a low loss 7/16 DIN plug to N type plug cable assembly and will be shipped same-day as it is purchased. 7/16 DIN plug to type N plug cable assembly PE3W12421/HS-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible 7/16 DIN cable assembly is manufactured with 7/16 DIN to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency 7/16 DIN male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W12421/HS-180 can also be used in the other direction and will be N type male to 7/16 DIN male cable assembly if the opposite connectivity is required. Low loss 7/16 DIN plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 7/16 DIN to N type cable assembly for quick shipment worldwide. Variations of 7/16 DIN cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 7/16 DIN male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink. |
| 0 | ||
| PE3C1548LF/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600-DB Coax with HeatShrink, LF Solder., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and type N cable connection on the other. Our low loss type N to N type cable assemblies have a male gender on end 1 and male on end 2. PE3C1548LF/HS-180 can also be known as a low loss N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3C1548LF/HS-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss type N plug to N type plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink, LF solder. |
| 0 | ||
| PE3W01814/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600-DB Coax with HeatShrink., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to type N cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a type N cable connection on one end and a type N cable connection on the other. Our low loss type N to type N cable assembly has a male gender on end 1 and a male on end 2. PE3W01814/HS-180 can also be known as a low loss type N plug to type N plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad aluminum as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 6-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W01814/HS-180 RF cable has a PE jacket of 0.590-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 87% and a minimum RF shielding of 90 dB. Our type N male to type N male cable has a maximum VSWR of 1.4:1. Type N plug to type N plug cable assembly PE3W01814/HS-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. Low loss type N plug to type N plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to type N low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. |
| 0 | ||
| PE3C1548/HS-180 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-600-DB, RF Cable Type: LMR-600-DB, RF Cable Impedance: 50 Ohm, Length, Max: 180 inches. N Male to N Male Low Loss Cable 180 Inch Length Using LMR-600-DB Coax with HeatShrink., Radio frequency assembly N male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink, N type cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and type N cable connection on the other. Our low loss N type to type N cable assemblies have a male gender on end 1 and male on end 2. PE3C1548/HS-180 can also be known as a low loss N type plug to type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to N type plug cable assembly PE3C1548/HS-180 is built with LMR-600-DB which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency N type male to type N male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low loss N type plug to type N plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to N type cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male low loss cable 180 inch length using LMR-600-DB coax with heatshrink. |
| 0 | ||
 Venkel Ltd. | SHPI121210S-180MU | VENKEL LTD | Shielded High Power Inductor;121210;Standard;18uH;�20% RoHS : Compliant | 0 | ||
| SHPI121245S-180MU | VENKEL LTD | Shielded High Power Inductor;121245;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI737334S-180MU | VENKEL LTD | Shielded High Power Inductor;737334;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI626650S-180MU | VENKEL LTD | Shielded High Power Inductor;626650;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI121260S-180MU | VENKEL LTD | Shielded High Power Inductor;121260;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI626630S-180MU | VENKEL LTD | Shielded High Power Inductor;626630;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI121280S-180MU | VENKEL LTD | Shielded High Power Inductor;121280;Standard;18uH;�20% RoHS : Compliant | 0 | |||
| SHPI737345S-180MU | VENKEL LTD | Shielded High Power Inductor;737345;Standard;18uH;�20% RoHS : Compliant | 0 | |||
 Vyrian | MCS1802GS-10-Z | Monolithic Power Systems | Current Sensor, 8 Pin, Plastic/epoxy RoHS : Compliant | 14,643 | ||
| MCP1825S-1802E/AB | Microchip Technology Inc | Fixed Positive LDO Regulator, 1.8V, 0.35V Dropout, CMOS, PSFM3 RoHS : Compliant | 13,128 | |||
| PSR033DS1800X | Littelfuse Inc | Electric Fuse, Fast Blow, 1800A, 650VAC, 500VDC, 200000A (IR), Inline/holder RoHS : Compliant | 12,629 | |||
| MCS1802GS-30-Z | Monolithic Power Systems | Current Sensor, 8 Pin, Plastic/epoxy RoHS : Compliant | 10,296 | |||
| MCS1803GS-20-Z | Monolithic Power Systems | Current Sensor, Analog, 8 Pin, Plastic/epoxy RoHS : Compliant | 9,679 | |||
| PTVS1800DRVR | Texas Instruments | Trans Voltage Suppressor Diode | 8,989 | |||
| MCP1755S-1802E/DB | Microchip Technology Inc | Fixed Positive LDO Regulator, 1.8V, 0.5V Dropout, CMOS, PDSO3 RoHS : Compliant | 8,460 | |||
| MCP1826S-1802E/EB | Microchip Technology Inc | Fixed Positive LDO Regulator, 1.8V, 0.4V Dropout, CMOS, PSSO3 RoHS : Compliant | 8,318 | |||
| S8VS-18024-F | OMRON Corporation | AC-DC Regulated Power Supply Module, 1 Output, 180W, Hybrid RoHS : Compliant | 7,150 | |||
| PSR033US1800X | Littelfuse Inc | Electric Fuse, Fast Blow, 1800A, 650VAC, 500VDC, 200000A (IR), Inline/holder RoHS : Compliant | 7,130 | |||
| MCS1806GS-3-10-Z | Monolithic Power Systems | Hall Effect Sensor RoHS : Compliant | 6,835 | |||
| S8VS-18024 | OMRON Corporation | AC-DC Regulated Power Supply Module, 1 Output, 180W, Hybrid RoHS : Compliant | 6,727 | |||
| PSR033FS1800Z | Littelfuse Inc | Electric Fuse, Fast Blow, 1800A, 650VAC, 500VDC, 200000A (IR), Inline/holder RoHS : Compliant | 6,078 | |||
| MPXS3020VMS180 | NXP Semiconductors | Microcontroller | 3,984 | |||
| MCP1825S-1802E/EB | Microchip Technology Inc | Fixed Positive LDO Regulator, 1.8V, 0.35V Dropout, CMOS, PSSO3 RoHS : Compliant | 3,346 | |||
 Win Source Electronics | NCP163AFCS180T2G | onsemi | IC REG LINEAR 1.8V 250MA 4WLCSP / Linear Voltage Regulator IC Positive Fixed 1 Output 250mA 4-WLCSP (0.64x0.64) RoHS : Compliant |
| 205,690 | |
TVS1800DRVR | Texas Instruments | UNIDIR PRECISION SURGE DIODE / RoHS : Compliant |
| 31,840 | ||
DS1804Z-010+ | Maxim Integrated Products | IC POT TRIMMER NV 10KOHM 8-SOIC / Digital Potentiometer 10kOhm 100POS Non-Volatile Linear 8-Pin SOIC N Tube RoHS : Compliant |
| 30,000 | ||
| DS1804Z-010 | Maxim Integrated Products | IC DGTL POT 10KOHM 100TAP 8SOIC RoHS : Not Compliant |
| 30,000 | ||
DS1803E-100+T&R | Maxim Integrated Products | Digital Potentiometer 256POS 100k Ohm 2Pot 14-Pin TSSOP T/R RoHS : Compliant |
| 18,450 | ||
| SN65LVDS180PW | Texas Instruments | IC HS DIFF LINEDRVR/RCVR 14TSSOP RoHS : Compliant |
| 6,436 | ||
| SN65LVDS180PWR | Texas Instruments | HIGH-SPEED DIFFERENTIAL LINE DRIVERS AND RECEIVERS | IC DIFF LINE DVR/RCVR HS 14TSSOP RoHS : Compliant |
| 6,080 | ||
| DS1804Z-010+T&R | Maxim Integrated Products | IC POT TRIMMER NV 10KOHM 8-SOIC RoHS : Compliant |
| 5,000 | ||
| DS1805E-010+ | Maxim Integrated Products | IC DGT POT 10KOHM 256TAP 14TSSOP RoHS : Compliant |
| 3,472 | ||
| SN75ALS180D | Texas Instruments | IC DIFF DRVR/RCVR PAIR 14-SOIC RoHS : Compliant |
| 3,410 | ||
| SN75ALS180DR | Texas Instruments | IC DIFF DRVR/RCVR PAIR 14-SOIC RoHS : Compliant |
| 3,250 | ||
SN75ALS180DG4 | Texas Instruments | DIFFERENTIAL DRIVER AND RECEIVER PAIRS RoHS : Compliant |
| 3,190 | ||
| SN75ALS180DRG4 | Texas Instruments | IC DIFF LINE DRVR/RCVR 14-SOIC RoHS : Compliant |
| 3,190 | ||
| EP2S180F1020I4N | Altera Corporation | IC FPGA 742 I/O 1020FBGA RoHS : Compliant |
| 500 | ||
| EP2S180F1020I4 | Intel Corporation | IC FPGA 742 I/O 1020FBGA RoHS : Not Compliant |
| 500 |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Russian ▼ 
English
Chinese
German
Japanese
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand