поискавой системы для электроныых деталей
  Russian  ▼
ALLDATASHEETRU.COM

X  



K13C-R дистрибьютор

дистрибьюторномер деталипроизводительподробное описание деталиPriceQty.
BuyNow

ComSIT USA
KC2016K135600C1GE00

Kyocera AVX Components AVAILABLE EU
1,217

Flip Electronics
2SK1305-E

Renesas Electronics Corporation Stock
RoHS : Compliant
3,101
2SK1300-E

Renesas Electronics Corporation Stock
RoHS : Compliant
1,161
2SK1339-E

Renesas Electronics Corporation Stock
RoHS : Compliant
307
EPF10K130EQC240-3N

Altera Corporation Stock
RoHS : Compliant
305
EPF10K130EQC240-3

Altera Corporation Stock
RoHS : Not Compliant
305
EPF10K130EQC240-2N

Altera Corporation Stock, Ship Today
RoHS : Compliant
1 : $247.5
305
EPF10K130EQC240-2

Altera Corporation Stock
RoHS : Not Compliant
305
EPF10K130EFC484-1

Altera Corporation Stock
RoHS : Not Compliant
10

Pasternack Enterprises US
PE3C100100-2PK1-36

Pasternack Enterprises Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMPM Female to SMA Male Cable 36 Inch Length Using PE-P047 Coax, 2 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100100-2PK1-36 mini SMP female to SMA male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and an SMA cable connection on the other. Our mini SMP to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C100100-2PK1-36 can also be known as a mini SMP jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.35-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to SMA cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100100-2PK1-36 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 2-position mini SMP full detent right angle block. This PE3C100100-2PK1-36 mini SMP jack to SMA plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method with body materials consisting of gold-plated beryllium copper for one connector and gold over nickel-plated brass for the other. Additional dimensions, specifications, and CAD drawings for this 36-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100100-2PK1-36 can also be used in the other direction and will be an SMA plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to SMA RF cable assembly as per your requirements.
1 : $740.99
10 : $711.35
25 : $681.71
100 : $652.07
0
PE3C100100-8PK1-36

Pasternack Enterprises Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMPM Female to SMA Male Cable 36 Inch Length Using PE-P047 Coax, 8 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100100-8PK1-36 mini SMP female to SMA male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to SMA male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and an SMA cable connection on the other. Our mini SMP to SMA cable assembly has a female gender on end 1 and a male on end 2. PE3C100100-8PK1-36 can also be known as a mini SMP jack to SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.19-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to SMA cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100100-8PK1-36 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to SMA male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 8-position mini SMP full detent right angle block. This PE3C100100-8PK1-36 mini SMP jack to SMA plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method with body materials consisting of gold-plated beryllium copper for one connector and gold over nickel-plated brass for the other. Additional dimensions, specifications, and CAD drawings for this 36-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100100-8PK1-36 can also be used in the other direction and will be an SMA plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to SMA plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to SMA cable assembly for quick shipment worldwide. Variations of mini SMP and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to SMA RF cable assembly as per your requirements.
1 : $2,110.0
10 : $2,025.6
25 : $1,941.2
100 : $1,856.8
0
PE3C100101-2PK1-36

Pasternack Enterprises Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMPM Female to 2.92mm Male Cable 36 Inch Length Using PE-P047 Coax, 2 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100101-2PK1-36 mini SMP female to right angle 2.92mm male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a right angle 2.92mm cable connection on the other. Our mini SMP to 2.92mm cable assembly has a female gender on end 1 and a male on end 2. PE3C100101-2PK1-36 can also be known as a mini SMP jack to right angle 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.35-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to 2.92mm cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100101-2PK1-36 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to right angle 2.92mm male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 2-position mini SMP full detent right angle block. This PE3C100101-2PK1-36 mini SMP jack to 2.92mm plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to right angle 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 36-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100101-2PK1-36 can also be used in the other direction and will be a right angle 2.92mm plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to 2.92mm right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of mini SMP and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to 2.92mm RF cable assembly as per your requirements.
1 : $892.99
10 : $857.27
25 : $821.55
100 : $785.83
0
PE3C100101-4PK1-36

Pasternack Enterprises Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMPM Female to 2.92mm Male Cable 36 Inch Length Using PE-P047 Coax, 4 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100101-4PK1-36 mini SMP female to 2.92mm male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a 2.92mm cable connection on the other. Our mini SMP to 2.92mm cable assembly has a female gender on end 1 and a male on end 2. PE3C100101-4PK1-36 can also be known as a mini SMP jack to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.63-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to 2.92mm cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100101-4PK1-36 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to 2.92mm male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 4-position mini SMP full detent right angle block. This PE3C100101-4PK1-36 mini SMP jack to 2.92mm plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 36-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100101-4PK1-36 can also be used in the other direction and will be a 2.92mm plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of mini SMP and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to 2.92mm RF cable assembly as per your requirements.
1 : $1,520.0
10 : $1,459.2
25 : $1,398.4
100 : $1,337.6
0
PE3C100101-8PK1-36

Pasternack Enterprises Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMPM Female to 2.92mm Male Cable 36 Inch Length Using PE-P047 Coax, 8 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100101-8PK1-36 mini SMP female to 2.92mm male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a 2.92mm cable connection on the other. Our mini SMP to 2.92mm cable assembly has a female gender on end 1 and a male on end 2. PE3C100101-8PK1-36 can also be known as a mini SMP jack to 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.19-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to 2.92mm cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100101-8PK1-36 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to 2.92mm male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 8-position mini SMP full detent right angle block. This PE3C100101-8PK1-36 mini SMP jack to 2.92mm plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 36-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100101-8PK1-36 can also be used in the other direction and will be a 2.92mm plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of mini SMP and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to 2.92mm RF cable assembly as per your requirements.
1 : $2,720.0
10 : $2,611.2
25 : $2,502.4
100 : $2,393.6
0
PE3C100102-2PK1-36

Pasternack Enterprises Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm. SMPM Female to 2.92mm Female Cable 36 Inch Length Using PE-P047 Coax, 2 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100102-2PK1-36 mini SMP female to 2.92mm male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to 2.92mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a Female 2.92mm cable connection on the other. Our mini SMP to 2.92mm cable assembly has a female gender on end 1 and a male on end 2. PE3C100102-2PK1-36 can also be known as a mini SMP jack to Female 2.92mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.35-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to 2.92mm cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100102-2PK1-36 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to 2.92mm male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 4-position mini SMP full detent right angle block. This PE3C100102-2PK1-36 mini SMP jack to Female 2.92mm plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C100102-2PK1-36 can also be used in the other direction and will be a Female 2.92mm plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to Female 2.92mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to Female 2.92mm cable assembly for quick shipment worldwide. Variations of mini SMP and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to 2.92mm RF cable assembly as per your requirements.
1 : $995.99
10 : $956.15
25 : $916.31
100 : $876.47
0
PE3C100102-4PK1-36

Pasternack Enterprises Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMPM Female to 2.92mm Female Cable 36 Inch Length Using PE-P047 Coax, 4 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100102-4PK1-36 mini SMP female to 2.92mm female RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to 2.92mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a 2.92mm cable connection on the other. Our mini SMP to 2.92mm cable assembly has a female gender on both ends. PE3C100102-4PK1-36 can also be known as a mini SMP jack to 2.92mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.63-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to 2.92mm cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100102-4PK1-36 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to 2.92mm female cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 4-position mini SMP full detent right angle block. This PE3C100102-4PK1-36 mini SMP jack to 2.92mm jack cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the clamp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 36-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100102-4PK1-36 can also be used in the other direction and will be a 2.92mm jack to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to 2.92mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of mini SMP and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to 2.92mm RF cable assembly as per your requirements.
1 : $1,730.0
10 : $1,660.8
25 : $1,591.6
100 : $1,522.4
0
PE3C100102-8PK1-36

Pasternack Enterprises Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.92mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMPM Female to 2.92mm Female Cable 36 Inch Length Using PE-P047 Coax, 8 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100102-8PK1-36 mini SMP female to 2.92mm female RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to 2.92mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to 2.92mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a 2.92mm cable connection on the other. Our mini SMP to 2.92mm cable assembly has a female gender on both ends. PE3C100102-8PK1-36 can also be known as a mini SMP jack to 2.92mm jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.19-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to 2.92mm cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100102-8PK1-36 RF cable has an FEP jacket of 0.056-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to 2.92mm female cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 8-position mini SMP full detent right angle block. This PE3C100102-8PK1-36 mini SMP jack to 2.92mm jack cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to 2.92mm cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the clamp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 36-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100102-8PK1-36 can also be used in the other direction and will be a 2.92mm jack to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to 2.92mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 2.92mm cable assembly for quick shipment worldwide. Variations of mini SMP and 2.92mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to 2.92mm RF cable assembly as per your requirements.
1 : $3,130.0
10 : $3,004.8
25 : $2,879.6
100 : $2,754.4
0
PE3C100103-2PK1-36

Pasternack Enterprises Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMPM Female to 1.85mm Male Cable 36 Inch Length Using PE-P047 Coax, 2 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100103-2PK1-36 mini SMP female to 1.85mm male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to 1.85mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a 1.85mm cable connection on the other. Our mini SMP to 1.85mm cable assembly has a female gender on end 1 and a male on end 2. PE3C100103-2PK1-36 can also be known as a mini SMP jack to 1.85mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.35-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to 1.85mm cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100103-2PK1-36 RF cable has an FEP jacket of 0.056-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 150 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to 1.85mm male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 2-position mini SMP full detent right angle block. This PE3C100103-2PK1-36 mini SMP jack to 1.85mm plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to 1.85mm cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 36-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100103-2PK1-36 can also be used in the other direction and will be a 1.85mm plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to 1.85mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 1.85mm cable assembly for quick shipment worldwide. Variations of mini SMP and 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to 1.85mm RF cable assembly as per your requirements.
1 : $948.99
10 : $911.03
25 : $873.07
100 : $835.11
0
PE3C100103-4PK1-36

Pasternack Enterprises Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMPM Female to 1.85mm Male Cable 36 Inch Length Using PE-P047 Coax, 4 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100103-4PK1-36 mini SMP female to 1.85mm male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to 1.85mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a 1.85mm cable connection on the other. Our mini SMP to 1.85mm cable assembly has a female gender on end 1 and a male on end 2. PE3C100103-4PK1-36 can also be known as a mini SMP jack to 1.85mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.63-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to 1.85mm cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100103-4PK1-36 RF cable has an FEP jacket of 0.056-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 150 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to 1.85mm male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 4-position mini SMP full detent right angle block. This PE3C100103-4PK1-36 mini SMP jack to 1.85mm plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to 1.85mm cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 36-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100103-4PK1-36 can also be used in the other direction and will be a 1.85mm plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to 1.85mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 1.85mm cable assembly for quick shipment worldwide. Variations of mini SMP and 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to 1.85mm RF cable assembly as per your requirements.
1 : $1,629.44
10 : $1,564.26
25 : $1,499.08
100 : $1,433.91
0
PE3C100103-8PK1-36

Pasternack Enterprises Key Specifications, Connector 1 Series: Mini SMP, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 1.85mm, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-P047, RF Cable Type: PE-P047, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMPM Female to 1.85mm Male Cable 36 Inch Length Using PE-P047 Coax, 8 Position Including Full Detent SMPM Male RA Surface Mount Block., Pasternack’s PE3C100103-8PK1-36 mini SMP female to 1.85mm male RF cable assembly using PE-P047 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The mini SMP female to 1.85mm male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom mini SMP to 1.85mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a mini SMP cable connection on one end and a 1.85mm cable connection on the other. Our mini SMP to 1.85mm cable assembly has a female gender on end 1 and a male on end 2. PE3C100103-8PK1-36 can also be known as a mini SMP jack to 1.85mm plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 1.19-inch diameter has copper as the cable’s inner conducting material and FEP dielectric type. The Mini SMP to 1.85mm cable from Pasternack is ideal for applications including radar, phased-array systems, 5g, 6g infrastructure, airborne and UAV avionics and test environments. This cable assembly employs durable and flexible materials, and with a 10.2-mm bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C100103-8PK1-36 RF cable has an FEP jacket of 0.056-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -65 to 150 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 90 dB. Our mini SMP female to 1.85mm male cable has a maximum VSWR of 1.4:1. This RF cable assembly is pre-installed into the connector housing and includes a 8-position mini SMP full detent right angle block. This PE3C100103-8PK1-36 mini SMP jack to 1.85mm plug cable assembly is built with PE-P047, which is a flexible coax type. The Pasternack flexible mini SMP cable assembly is manufactured with mini SMP to 1.85mm cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a beryllium copper body with gold plating, while the other has the solder attachment method and a beryllium copper body with gold over nickel plating. Additional dimensions, specifications, and CAD drawings for this 36-inch-long RF cable are available on our downloadable PDF datasheet. PE3C100103-8PK1-36 can also be used in the other direction and will be a 1.85mm plug to mini SMP jack cable assembly if the opposite connectivity is required. This mini SMP jack to 1.85mm plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality mini SMP to 1.85mm cable assembly for quick shipment worldwide. Variations of mini SMP and 1.85mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal mini SMP to 1.85mm RF cable assembly as per your requirements.
1 : $2,939.18
10 : $2,821.61
25 : $2,704.05
100 : $2,586.48
0

Venkel Ltd.
TFCR0201-20W-K-1331DT

VENKEL LTD Thin Film CR;0201;1/20W;�100PPM;1.33K;�0.5%
RoHS : Compliant
0
TFCR0402-16W-K-1332FT-1K

VENKEL LTD Thin Film CR;0402;1/16W;�100PPM;13.3K;�1%
RoHS : Compliant
0
TFCR0402-16W-K-1351CT-1K

VENKEL LTD Thin Film CR;0402;1/16W;�100PPM;1.35K;�0.25%
RoHS : Compliant
0
TFCR0402-16W-K-1371DT

VENKEL LTD Thin Film CR;0402;1/16W;�100PPM;1.37K;�0.5%
RoHS : Compliant
0
TFCR0402-16W-K-13R7DT-1K

VENKEL LTD Thin Film CR;0402;1/16W;�100PPM;13.7R;�0.5%
RoHS : Compliant
0
TFCR0603-10W-K-1303CT-1K

VENKEL LTD Thin Film CR;0603;1/10W;�100PPM;130K ;�0.25%
RoHS : Compliant
0
TFCR0603-10W-K-1323DT

VENKEL LTD Thin Film CR;0603;1/10W;�100PPM;132K ;�0.5%
RoHS : Compliant
0
TFCR0603-10W-K-1352BT

VENKEL LTD Thin Film CR;0603;1/10W;�100PPM;13.5K;�0.1%
RoHS : Compliant
0
TFCR0603-10W-K-1371BT-1K

VENKEL LTD Thin Film CR;0603;1/10W;�100PPM;1.37K;�0.1%
RoHS : Compliant
0
TFCR0603-10W-K-13R3BT

VENKEL LTD Thin Film CR;0603;1/10W;�100PPM;13.3R;�0.1%
RoHS : Compliant
0
TFCR0603-16W-K-1373BT-1K

VENKEL LTD Thin Film CR;0603;1/16W;�100PPM;137K ;�0.1%
RoHS : Compliant
0
TFCR0603-16W-K-1381CT-1K

VENKEL LTD Thin Film CR;0603;1/16W;�100PPM;1.38K;�0.25%
RoHS : Compliant
0
TFCR0603-16W-K-13R2DT-1K

VENKEL LTD Thin Film CR;0603;1/16W;�100PPM;13.2R;�0.5%
RoHS : Compliant
0
TFCR0805-10W-K-1303BT

VENKEL LTD Thin Film CR;0805;1/10W;�100PPM;130K ;�0.1%
RoHS : Compliant
0
TFCR0805-10W-K-1334CT-1K

VENKEL LTD Thin Film CR;0805;1/10W;�100PPM;1.33M;�0.25%
RoHS : Compliant
0

Vyrian
TK13E25D,S1X(S

Toshiba America Electronic Components Power Field-Effect Transistor, 13A I(D), 1-Element, N-Channel, Metal-oxide Semiconductor FET
RoHS : Compliant
17,043
UBY1K132MHL6

Nichicon Corporation Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 80V, 20% +Tol, 20% -Tol, 1300uF, Through Hole Mount
RoHS : Compliant
14,836
ZXTR2005K-13

Diodes Incorporated 5V, BIPolar
13,784
US1K-13

Diodes Incorporated Rectifier Diode, 1 Phase, 1 Element, 1A, 800V V(RRM), Silicon
10,119
LNBK13SP-TR

STMicroelectronics
RoHS : Compliant
9,642
TMDSLCDK138

Texas Instruments
9,335
VN772K13TR

STMicroelectronics Brush DC Motor Controller, 12A, PDSO28
RoHS : Compliant
8,806
VN771K13TR

STMicroelectronics Brush DC Motor Controller, 15A, PDSO28
RoHS : Compliant
7,650
STK130N4LF7AG

STMicroelectronics Power Field-Effect Transistor, 100A I(D), 40V, 0.006ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET
RoHS : Compliant
6,826
LNBK13SP

STMicroelectronics
RoHS : Compliant
6,229
VN770K13TR

STMicroelectronics Brush DC Motor Controller, 12A, CMOS, PDSO28
RoHS : Compliant
5,908
TMDXLCDK138

Texas Instruments
4,498
STK13003

STMicroelectronics Power Bipolar Transistor, 1.5A I(C), 400V V(BR)CEO, 1-Element, NPN, Silicon, Plastic/Epoxy, 3 Pin
RoHS : Compliant
1,209
TNPW08051K13BEEN

Vishay Intertechnologies Fixed Resistor, Thin Film, 0.125W, 1130ohm, 150V, 0.1% +/-Tol, 25ppm/Cel, Surface Mount, 0805
RoHS : Compliant
725
SU201M-K13

ABB Low Voltage Products and Systems Thermal Magnetic Circuit Breaker
673

Waytek, Inc.
PET BLK 1-3/4" 50'

Techflex Inc Techflex PTN1.75BK-50 Standard Expandable Sleeving is black 1-3/4" braided polyester sleeving on a 50' spool. It features a 10 mil standard wall, fits recommended bundle sizes from 1-1/4" to 2-3/4", and is designed to slip over wire harnesses or tubing for abrasion protection and cable bundling.
50 : $0.9927
250 : $0.9089
700

Win Source Electronics
US1K-13-F

Diodes Incorporated DIODE GEN PURP 800V 1A SMA
RoHS : Compliant
6,040 : $0.0497
4,515 : $0.0554
3,495 : $0.0573
2,535 : $0.0592
1,640 : $0.0611
675 : $0.0745
370,000
BUK9K13-60EX

Nexperia MOSFET 2N-CH 60V 40A LFPAK56D
RoHS : Compliant
545 : $0.5528
410 : $0.6166
315 : $0.6378
230 : $0.6591
150 : $0.6803
65 : $0.8291
138,000
2SK1317

Hitachi Ltd Silicon N-Channel MOS FET
RoHS : Not Compliant
96 : $4.0503
77 : $4.2185
59 : $4.3879
42 : $4.7255
27 : $4.8937
13 : $5.2313
47,700
S2K-13-F

Diodes Incorporated DIODE GEN PURP 800V 1.5A SMB
RoHS : Compliant
940 : $0.3208
700 : $0.3578
545 : $0.3701
395 : $0.3825
255 : $0.3948
105 : $0.4811
36,000
S1K-13-F

Diodes Incorporated DIODE GEN PURP 800V 1A SMA
RoHS : Compliant
2,540 : $0.1182
1,900 : $0.1319
1,470 : $0.1364
1,065 : $0.141
690 : $0.1455
285 : $0.1773
10,000
TK13A65U

Toshiba America Electronic Components MOSFET N-CH 650V 13A TO-220SIS / Trans MOSFET N-CH Si 650V 13A 3-Pin(3+Tab) TO-220SIS
RoHS : Not Compliant
695 : $0.4323
520 : $0.4822
405 : $0.4988
295 : $0.5154
190 : $0.532
80 : $0.6484
7,500
ZXTR2005K-13

Diodes Incorporated IC REG LDO 5V 50MA TO252
RoHS : Compliant
945 : $0.3176
710 : $0.3542
550 : $0.3665
400 : $0.3787
260 : $0.3909
105 : $0.4764
5,397
NTM88K135ST1

Nexperia TPMS 4X4 1500KPA XZ AXIS
6 : $62.4
5 : $69.6
4 : $72.0
3 : $74.4
2 : $76.8001
1 : $93.6
4,000
LDK130M-R

STMicroelectronics IC REG LIN POS ADJ 300MA SOT23-5
RoHS : Compliant
1,280 : $0.2344
960 : $0.2615
740 : $0.2705
540 : $0.2795
350 : $0.2885
145 : $0.3516
2,720
EPF10K130EFC484-3

Altera Corporation IC FPGA 369 I/O 484FBGA
RoHS : Not Compliant
9 : $41.1225
7 : $42.7941
6 : $44.4657
4 : $47.809
3 : $49.4807
2 : $52.8239
2,300
DMG2302UK-13

Diodes Incorporated MOSFET N-CH 20V 2.8A SOT23
RoHS : Compliant
7,030 : $0.0478
5,245 : $0.0534
4,060 : $0.0552
2,950 : $0.057
1,905 : $0.0589
785 : $0.0718
2,266
2SK1317-E

Renesas Electronics Corporation MOSFET N-CH 1500V 2.5A TO-3P
RoHS : Compliant
33 : $9.2482
26 : $9.6241
20 : $10.0
14 : $10.7519
9 : $11.1279
5 : $11.8797
1,000
SA58672TK,138

Nexperia IC AMP AUDIO 3W MONO D 10HVSON / Audio Amp Speaker 1-CH Mono 3W Class-D 10-Pin HVSON T/R
184 : $1.8328
137 : $2.0442
106 : $2.1147
77 : $2.1852
50 : $2.2557
21 : $2.749
590
SA58672TK+138

Nexperia IC AMP AUDIO 3W MONO D 10HVSON
184 : $1.8328
137 : $2.0442
106 : $2.1147
77 : $2.1852
50 : $2.2557
21 : $2.749
590
EPF10K130EFI484-2

Altera Corporation IC FPGA 369 I/O 484FBGA
RoHS : Not Compliant
4 : $87.579
3 : $97.6843
2 : $101.0527
1 : $104.4211
143

ссылки URL



Вашему бизинису помогли Аллдатащит?  [ DONATE ]  

Что такое Аллдатащит   |   реклама   |   контакт   |   Конфиденциальность   |   Ссылка на техническое описание    |   обмен ссыками   |   поиск по производителю
All Rights Reserved짤Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com