| поискавой системы для электроныых деталей |
|
H72TCG-R дистрибьютор |
| дистрибьютор | номер детали | производитель | подробное описание детали | Price | Qty. BuyNow | |
![]() DigiKey | MTF0402H72N_ST | Shenzhen Microgate Technology Co Ltd | FIXED IND 72 NH 1000 MA 0.1 OHM |
| 30,000 | |
| 5725H7-20.000N33DTNOK | Hang Crystal International | OCXO,SMD25*22,20MHz,LVCMOS,3.3V, |
| 29,011 | ||
| 5725H7-20.000N33DTNOK | Hang Crystal International | OCXO,SMD25*22,20MHZ,LVCMOS,3.3V, |
| 29,010 | ||
| STM32H725RGV6 | STMicroelectronics | IC MCU 32BIT 1MB FLASH 68VFQFPN RoHS : Compliant |
| 1,363 | ||
| XLH725025.000000X | SiTime Corporation | XTAL OSC XO 25.0000MHZ HCMOS SMD |
| 495 | ||
SNJ54H72W![]() | Rochester Electronics LLC | J-K FLIP-FLOP RoHS : Not Compliant |
| 137 | ||
| 54H72DM | Rochester Electronics LLC | IC FF JK-TYPE 1-ELE 1-BIT |
| 27 | ||
| ECS-10X3-LH-725-G9 | Helix Linear Technologies | 10 mm Diameter x 3 mm Lead - Met |
| 10 | ||
| ECS-10X3-RH-725-G9 | Helix Linear Technologies | 10 mm Diameter x 3 mm Lead - Met |
| 10 | ||
| ECS-10X4-LH-725-G9 | Helix Linear Technologies | 1 mm Diameter x 4 mm Lead - Metr |
| 10 | ||
| ECS-32X10-LH-725-G9 | Helix Linear Technologies | 32 mm Diameter x 10 mm Lead - Me |
| 10 | ||
| ECS-32X10-RH-725-G9 | Helix Linear Technologies | 32 mm Diameter x 10 mm Lead - Me |
| 10 | ||
| ECS-20X10-LH-725-G9 | Helix Linear Technologies | 20 mm Diameter x 10 mm Lead - Me |
| 10 | ||
| ECS-16X10-RH-725-G9 | Helix Linear Technologies | 16 mm Diameter x 10 mm Lead - Me |
| 10 | ||
| ECS-12.7X25.4-RH-725-G9 | Helix Linear Technologies | 12.7 mm Diameter x 25.4 mm Lead |
| 10 | ||
![]() Avnet Americas | H7232FNLT | Pulse Electronics Corporation | TRANSFORMER - Tape and Reel (Alt: H7232FNLT) RoHS : Compliant | 14,820 | ||
| STM32H725ZGT6 | STMicroelectronics | ARM MCU, STM32 Family STM32H7 Series Microcontrollers, ARM Cortex-M7F, 32 bit, 550 MHz, 1 MB - Trays (Alt: STM32H725ZGT6) RoHS : Not Compliant |
| 2,160 | ||
| FH-72334N-55P | Amphenol Corporation | - Bulk (Alt: FH-72334N-55P) RoHS : Not Compliant | 65 | |||
| TS1GSH72V2B6-I | Transcend Information Inc | - Trays (Alt: TS1GSH72V2B6-I) RoHS : Not Compliant | 50 | |||
| 180-091MH7-21-16SN | Glenair Inc | - Bulk (Alt: 180-091MH7-21-16SN) RoHS : Not Compliant | 0 | |||
| STM32H725ZGT6TR | STMicroelectronics | STM32H - Tape and Reel (Alt: STM32H725ZGT6TR) RoHS : Not Compliant |
| 0 | ||
| TS2GLH72V2E | Transcend Information Inc | 16GB DDR4 3200 ECC-DIMM SINGLE RANK 2GX8 CL22 1.2V - Bulk (Alt: TS2GLH72V2E) RoHS : Compliant | 0 | |||
| XLH726075.000000I | SiTime Corporation | - Tape and Reel (Alt: XLH726075.000000I) RoHS : Compliant | 0 | |||
| XUH725125.000000I | SiTime Corporation | - Tape and Reel (Alt: XUH725125.000000I) RoHS : Compliant | 0 | |||
T491C106K025AH7280![]() | KEMET Corporation | - Tape and Reel (Alt: T491C106K025AH7280) RoHS : Not Compliant |
| 0 | ||
T491D226K016AH7280![]() | KEMET Corporation | - Tape and Reel (Alt: T491D226K016AH7280) RoHS : Not Compliant |
| 0 | ||
| XC6701BH72PR-G | Torex Semiconductor LTD | Linear Voltage Regulator, Fixed, 1 Output, 17.7V, 2 V to 28 V, 150mA, SOT-89, 5 Pins, Surface Mount - Tape and Reel (Alt: XC6701BH72PR-G) RoHS : Compliant |
| 0 | ||
| XLH726018.432000I | SiTime Corporation | - Tape and Reel (Alt: XLH726018.432000I) RoHS : Compliant | 0 | |||
ATS-08H-72-C1-R0![]() | Advanced Thermal Solutions Inc | - Trays (Alt: ATS-08H-72-C1-R0) RoHS : Compliant |
| 0 | ||
T491X227K010AH7280![]() | KEMET Corporation | - Tape and Reel (Alt: T491X227K010AH7280) RoHS : Not Compliant |
| 0 | ||
![]() Newark | FH72-31S-0.3SHW | Hirose Electric Co Ltd | CONN, FPC, R/A RCPT, 31POS, 2ROW, 0.3MM; RoHS : Compliant |
| 12,000 | |
| FH72-21S-0.3SHW | Hirose Electric Co Ltd | CONN, FPC, R/A RCPT, 21POS, 2ROW, 0.3MM; RoHS : Compliant |
| 6,000 | ||
| FH72-31S-0.3SHW | Hirose Electric Co Ltd | CONN, FPC, R/A RCPT, 31POS, 2ROW, 0.3MM; RoHS : Compliant |
| 5,338 | ||
| VOIH72AT | Vishay Intertechnologies | OPTOCOUPLER, HIGH SPEED, 3.75KV, SOIC-8; RoHS : Compliant |
| 1,656 | ||
| VOIH72AT | Vishay Intertechnologies | OPTOCOUPLER, HIGH SPEED, 3.75KV, SOIC-8; RoHS : Compliant |
| 1,656 | ||
| FMCA2601/WH-72 | Fairview Microwave Inc | COAX CABLE ASSEMBLY; RoHS : Not Compliant |
| 41 | ||
| SH7213 | Fairview Microwave Inc | SMA 90 DEGREE HYBRID COUPLER FROM 1 GHZ; RoHS : Compliant |
| 10 | ||
| FMCA2602/WH-72 | Fairview Microwave Inc | COAX CABLE ASSEMBLY; RoHS : Not Compliant |
| 10 | ||
| FMCA2676/WH-72 | Fairview Microwave Inc | COAX CABLE ASSEMBLY; RoHS : Not Compliant |
| 5 | ||
| FMCA2604/WH-72 | Fairview Microwave Inc | COAX CABLE ASSEMBLY; RoHS : Not Compliant |
| 5 | ||
| SH7221 | Fairview Microwave Inc | SMA 90 DEGREE HYBRID COUPLER FROM 800 MH; RoHS : Compliant |
| 3 | ||
| SH7217 | Fairview Microwave Inc | SMA 90 DEGREE HYBRID COUPLER FROM 2 GHZ; RoHS : Compliant |
| 2 | ||
| FMCA2603/WH-72 | Fairview Microwave Inc | COAX CABLE ASSEMBLY; RoHS : Not Compliant |
| 1 | ||
| FMCA2605/WH-72 | Fairview Microwave Inc | COAX CABLE ASSEMBLY; RoHS : Not Compliant |
| 1 | ||
| FMCA2677/WH-72 | Fairview Microwave Inc | COAX CABLE ASSEMBLY; RoHS : Not Compliant |
| 1 | ||
![]() RS | PP2-1H7-2A2 | E-Switch Inc | SNAP-ACTION SWITCH, PP2 SERIES, DPDT, ON-(ON),WHITE PLUNGER,16A,125VAC,.187" QC RoHS : Compliant |
| 1,569 | |
| R2E133-BH72-13 | ebm-papst | MOTORIZED IMPELLER, 115VAC, ROUND, 66DBA, BALL, 203.0CFM, 2 WIRE, R2E133 SERIES |
| 57 | ||
| SKKH 72/16 E | SEMIKRON | THYRISTOR, LINE, 70A ON-STATE (AVG. MAX.), 1600A, 125A IT(RMS), SEMIPACK CASE |
| 41 | ||
| RH727 | STA-KON | NYLON INS.RING TERMINAL, BOLT HOLE 5/16",1/0,WHITE, COPPER, TIN PLATED |
| 4 | ||
| 9080GH72 | Square D by Schneider Electric | TERMINAL BLOCK JUMPER GK6+GR6 |
| 3 | ||
| NH72 | Altra Industrial Motion Corp | SPUR GEAR, CAST IRON |
| 2 | ||
| LDSWITCH72 | nVent Hoffman | DOOR SWITCH CABLE, FOR PANELITE ENCLOSURE LIGHT, 72 INCH, BLACK, COPPER |
| 1 | ||
| 3VA9977-0CH72 | Siemens | MAX FLEX OPERATOR HANDLE FOR LOW VOLTAGE CIRCUIT BREAKER, 3VA SERIES |
| 1 | ||
| 3VA9877-0CH72 | Siemens | BRKR 3VA 800A+ HNDL MAX-FLEX N3R STL RB ; 3VA9877-0CH72 |
| 1 | ||
| 3VA99780CH72 | Siemens | BREAKER, MOLDED CASE, 3VA MAX FLEX HANDLE GRAY STEEL |
| 0 | ||
| H721-10-H-P16 | Altra Industrial Motion Corp | SPEED REDUCER, GEARBOX, RIGHT ANGLE WORM GEAR, 10:1 RATIO |
| 0 | ||
| H721-30-H-P23 | Altra Industrial Motion Corp | SPEED REDUCER, GEARBOX, RIGHT ANGLE WORM GEAR, 30:1 RATIO |
| 0 | ||
| H726-50-H-P24 | Altra Industrial Motion Corp | SPEED REDUCER, GEARBOX, RIGHT ANGLE WORM GEAR, 50:1 RATIO |
| 0 | ||
| HSD371024H721 | Dynapar | DW38HA-1.0-1024-ABZC-72-S18-28 |
| 0 | ||
| 1FW32021FH725AA0 | Siemens | MOTOR, TORQUE,3AC,500NM,13.1KW,250RPM ; 1FW32021FH725AA0 |
| 0 | ||
![]() Microchip Technology Inc | MCP6H72T-E/MNY | Microchip Technology Inc | 2Mhz 12V opamp, TDFN, Projected EOL: 2040-10-17 RoHS : Compliant |
| 6,600 | |
| MCP6H72T-E/SN | Microchip Technology Inc | 2Mhz 12V opamp, SOIC, Projected EOL: 2040-10-17 RoHS : Compliant |
| 3,300 | ||
| MCP6H72-E/SN | Microchip Technology Inc | 2Mhz 12V opamp, SOIC, Projected EOL: 2040-10-17 RoHS : Compliant |
| 74 | ||
![]() Rochester Electronics | SNJ54H72W![]() | Texas Instruments | J-K Flip-Flop, TTL/H/L Series, 1-Func, Negative Edge Triggered, 2-Bit, Complementary Output, TTL, CDFP14 RoHS : Not Compliant |
| 137 | |
LMH7220MK![]() | Texas Instruments | Comparator, 1 Func, 9500uV Offset-Max, 3.63ns Response Time, PDSO6 RoHS : Not Compliant |
| 18,083 | ||
SNJ54H72J![]() | Texas Instruments | J-K Flip-Flop, TTL/H/L Series, 1-Func, Negative Edge Triggered, 2-Bit, Complementary Output, TTL, CDIP14 RoHS : Not Compliant |
| 55 | ||
LMH7220MKX/NOPB![]() | Texas Instruments | Comparator, 1 Func, 9500uV Offset-Max, 3.56ns Response Time, PDSO6 RoHS : Compliant |
| 44 | ||
SN74H72N![]() | Texas Instruments | J-K Flip-Flop, TTL/H/L Series, 1-Func, Negative Edge Triggered, 2-Bit, Complementary Output, TTL, PDIP14 RoHS : Not Compliant |
| 1,337 | ||
LMH7220MK/NOPB![]() | Texas Instruments | Comparator General Purpose 1 CH Complementary SOT-23-6 T/R RoHS : Compliant |
| 71 | ||
| 54H72DM | National Semiconductor Corporation | 54H72 - JK Master/Slave Flip-Flop (with AND Inputs) |
| 27 | ||
| LMH7220MG/NOPB | National Semiconductor Corporation | Comparator, 1 Func, 9500uV Offset-Max, PDSO6 RoHS : Compliant |
| 26,726 | ||
LMH7220MK![]() | National Semiconductor Corporation | Comparator, 1 Func, 9500uV Offset-Max, 3.63ns Response Time, PDSO6 RoHS : Not Compliant |
| 54 | ||
LMH7220MK/NOPB![]() | National Semiconductor Corporation | Comparator General Purpose 1 CH Complementary SOT-23-6 T/R RoHS : Compliant |
| 2,783 | ||
| 54H72J/B | Rochester Electronics LLC | Flip Flop Positive Edge 1 Element 5V 14-DIP Tube RoHS : Not Compliant |
| 200 | ||
| 93H72DC | Rochester Electronics LLC | 93H72DC RoHS : Not Compliant |
| 24 | ||
| 93H72PC | Rochester Electronics LLC | 93H72PC RoHS : Not Compliant |
| 2,416 | ||
| STM32H725REV6 | STMicroelectronics | IC MCU ARM® Cortex®-M7F 32Bit 1 Core FLASH 512kB (512k x 8) 550MHz 68-QFN Tray RoHS : Compliant |
| 620 | ||
| SFH 7251 | ams OSRAM Group | SFH 7251 - LED Emitter Infrared (IR) 850nm 70mA 4-LCC T/R RoHS : Compliant |
| 3,961 | ||
![]() Sager | BCPNH72 | ABB Group | Thomas & Betts | 0 | ||
ATS-08H-72-C1-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:LEFT-TABBED,BLUE,NO TIM |
| 0 | ||
| SFSD-10-28-H-72.00-DR-NDS | Samtec Inc | Rectangular Cable Assemblies Double Row Discrete Wire Assembly, 0.050 Pitch RoHS : Compliant |
| 0 | ||
ATS-14H-72-C3-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:LEFT-TABBED,BLUE,T412 |
| 0 | ||
ATS-21H-72-C3-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:LEFT-TABBED,BLUE,T412 RoHS : Compliant |
| 0 | ||
| SFSD-15-28-H-72.00-DS-NDX | Samtec Inc | Rectangular Cable Assemblies Double Row Discrete Wire Assembly, 0.050 Pitch RoHS : Compliant |
| 0 | ||
| SFSD-50-30-H-72.00-DR-NDS | Samtec Inc | Rectangular Cable Assemblies RoHS : Compliant | 0 | |||
| V23162H720B610 | TE Connectivity | Low Signal Relays - PCB | 0 | |||
| SFSDT-30-28-H-72.00-S | Samtec Inc | Rectangular Cable Assemblies Double Row Discrete Teflon Wire Assembly, 0.050 Pitch RoHS : Compliant |
| 0 | ||
ATS-03H-72-C3-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:LEFT-TABBED,BLUE,T412 RoHS : Compliant |
| 0 | ||
ATS-10H-72-C3-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:LEFT-TABBED,BLUE,T412 |
| 0 | ||
| TFSDT-20-28-H-72.00-SL | Samtec Inc | .050 TIGER EYE� DOUBLE ROW DISCRETE WIRE CABLE ASSEMBLY |
| 0 | ||
ATS-01H-72-C3-R0![]() | Advanced Thermal Solutions Inc | PUSH PIN HS ASMBLY,FINE-PITCH,STRAIGHT, HOLE PATTERN:LEFT-TABBED,BLUE,T412 RoHS : Compliant |
| 0 | ||
| SFSD-30-28-H-72.00-S | Samtec Inc | Rectangular Cable Assemblies Double Row Discrete Wire Assembly, 0.050 Pitch RoHS : Compliant |
| 0 | ||
| SFSS-03-28C-H-72.00-DR-NUS | Samtec Inc | Rectangular Cable Assemblies Single Row Discrete Wire Assembly, 0.050 Pitch RoHS : Compliant |
| 0 | ||
![]() TME | SKKH 72/22E H4 07911030 | SEMIKRON | Module: diode-thyristor; 2.2kV; 70A; A47; SEMIPACK1; Ufmax: 1.9V |
| 13 | |
| H.7207C | Pawbol Sp zoo | Cable strap clip; black; L: 100mm; 100pcs; UP-30; Ø: 30mm |
| 8 | ||
| H.7204 | Pawbol Sp zoo | Holder; white; Ømount.hole: 10mm; L: 130mm; 50pcs; UM 10 |
| 6 | ||
| REF-H72 | PEPPERL+FUCHS GmbH | Reflector; 73x19x8.4mm; M3 x2; REF |
| 5 | ||
| H.7202AC | Pawbol Sp zoo | Cable strap clip; black; L: 65mm; 25pcs; UP-22; Ø: 22mm |
| 3 | ||
| IXFH72N30X3 | IXYS Corporation | Transistor: N-MOSFET; X3-Class; unipolar; 300V; 72A; 390W; TO247-3 |
| 3 | ||
| B41895H7278M000 | TDK Corporation | Capacitor: electrolytic; THT; 2.7mF; 35VDC; Ø18x31.5mm; ±20%; 5000h RoHS : Unknown |
| 0 | ||
| EH7273-000 | TE Connectivity | 90° angled connector RoHS : Not Compliant |
| 0 | ||
| LQG15WH72NH02D | Murata Manufacturing Co Ltd | Inductor: air coil; SMD; 0402; 72nH; 160mA; R: 2.2Ω; ±3%; LQG; 180mm RoHS : Compliant |
| 0 | ||
| E6C3-CWZ5GH 720P/R 2M | OMRON Corporation | Encoder: incremental; Usup: 12÷24VDC; 720imp/revol; IP65; 2m |
| 0 | ||
| STM32H723VGT6 | STMicroelectronics | IC: STM32 ARM microcontroller; 550MHz; LQFP100; 1.71÷3.6VDC RoHS : Compliant |
| 0 | ||
| GA JTLPS1.23-H2H7-23-1-150-R33 | ams OSRAM Group | LED; amber; SMD; 1411; 35÷39lm; 2.1÷2.5VDC; 3.5x2.8x0.7mm; 120° |
| 0 | ||
| STM32H723VGT6TR | STMicroelectronics | IC: STM32 ARM microcontroller; 550MHz; LQFP100; 1.71÷3.6VDC RoHS : Compliant |
| 0 | ||
| STM32H723ZGI6 | STMicroelectronics | IC: STM32 ARM microcontroller; 550MHz; UFBGA144; 1.62÷3.6VDC RoHS : Compliant |
| 0 | ||
| STM32H725VEH6 | STMicroelectronics | IC: STM32 ARM microcontroller; 550MHz; TFBGA129; 1.62÷3.6VDC RoHS : Compliant |
| 0 | ||
![]() Ameya Holding Limited | STM32H723VGT6 | STMicroelectronics | RoHS : Compliant | 20,000 | ||
![]() ComSIT USA | CDEPH7212NPR18LC | Sumida Corporation | AVAILABLE EU | 1,500 | ||
![]() ComSIT USA | SFH7225BINR | OSRAM GmbH | Electronic Component RoHS : Compliant | 6,830 | ||
| STRH7204TL | Sanken Electric Co Ltd | Electronic Component RoHS : Compliant | 5,900 | |||
| SFH7252 | OSRAM GmbH | Infrared LED, 2.4mm, 1-Element, 950nm RoHS : Compliant | 4,000 | |||
| SFH7251 | OSRAM GmbH | Optoelectronic Device RoHS : Compliant | 2,000 | |||
TSH72CD![]() | STMicroelectronics | RAIL-TO-RAIL, WIDE-BAND, LOW-POWER OPERATIONAL AMPLIFIERS Operational Amplifier, 2 Func, PDSO8 RoHS : Not Compliant | 200 | |||
| CH727C275KA80A7 | Kyocera AVX Components | Ceramic Capacitor, Multilayer, Ceramic, 500V, 10% +Tol, 10% -Tol, X7R, 15% TC, 2.7uF, Surface Mount, 6685 RoHS : Not Compliant | 15 | |||
| SKKH7208E | SEMIKRON | SEMIPACK 1 THYRISTOR / DIODE MODULE Silicon Controlled Rectifier, 125A I(T)RMS, 70000mA I(T), 800V V(DRM), 800V V(RRM), 2 Element RoHS : Not Compliant | 9 | |||
![]() Interstate Connecting Components | 180-122NFH7-21-40C | Glenair Inc | 9 | |||
| 180-060XWH7-25-29PN | Glenair Inc | 38999 29#16 FIBER WALL MT PIN CAD OD | 3 | |||
| 180-091MH7-21-16SN | Glenair Inc | FIBER OPTIC CONNECTOR | 0 | |||
| 180-060XWH7-25-29SN | Glenair Inc | 38999 29#16 FIBER WALL MT SKT CAD OD | 0 | |||
| 180-09INFH7-25-37SN | Glenair Inc | SA-GLENAIR | 0 | |||
| 180-060XWH7-25-29PB | Glenair Inc | 0 | ||||
| 180-091XWH7-21-16PN | Glenair Inc | 0 | ||||
| 180-060XMH7-25-37SN | Glenair Inc | 0 | ||||
| 180-091XWH7-21-16SN | Glenair Inc | 0 | ||||
| MIK6-1-7PH72 | ITT Interconnect Solutions | MIK6-1-7PH72 | 0 | |||
| 180-122XWH7-23-52A | Glenair Inc | FIBER OPTIC CONNECTOR |
| 0 | ||
| 180-122NFH7-21-40N | Glenair Inc | 0 | ||||
| 180-118MEH7-23-18KS4 | Glenair Inc | 64266/1 FIBER RECEPTACLE SQUARE FLANGE WALL MOUNT | 0 | |||
| 180-122NFH7-23-52A | Glenair Inc | FIBER OPTIC CONNECTOR RoHS : Not Compliant | 0 | |||
| EH7277-000 | TE Connectivity | 0026K0214-9 RoHS : Not Compliant | 0 | |||
![]() PEI Genesis | TH721 | Daniels Manufacturing Corporation (DMC) |
| 0 | ||
| FHG.1B.310.CLAH72Z | LEMO connectors | RoHS : Compliant |
| 0 | ||
| TH727 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| MIK6-1-7PH72 | ITT Interconnect Solutions |
| 0 | |||
| TH723 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| TH724 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| S3453H-72140341 | SOURIAU-SUNBANK |
| 0 | |||
| FHG.1B.316.CLAH72Z | LEMO connectors | RoHS : Compliant |
| 0 | ||
| GA801EH72 | SOURIAU-SUNBANK |
| 0 | |||
| TH729 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| TH728 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| TH720 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| TH725 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| TH72 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
| TH726 | Daniels Manufacturing Corporation (DMC) |
| 0 | |||
![]() Powell Electronics | APH7-25-M40-1-C | Polamco Ltd | BACKSHELL APH7-25-M40-1-C |
| 13 | |
| EH7273-000 | TE Connectivity | backshells, RoHS : Not Compliant |
| 1 | ||
| APH7-23-M32-1-C | Polamco Ltd | BACKSHELL APH7-23-M32-1-C |
| 1 | ||
| APH7-21-M40-1-C | TE Connectivity | Connectors RoHS : Compliant |
| 1 | ||
![]() Chip 1 Exchange | ENH722DMZ4 | INSTOCK | 30,950 | |||
| TSH72CPT | INSTOCK | 4,523 | ||||
| TSH72CDT | INSTOCK | 2,371 | ||||
| IXFH72N30X3 | IXYS Corporation | INSTOCK | 1,471 | |||
| WUH722424ALE6L4 | Western Digital Corp | INSTOCK RoHS : Compliant | 500 | |||
| TH72005KLD-BAA-000-TU | INSTOCK | 98 | ||||
| WUH722626AL5204 | Western Digital Corp | INSTOCK | 20 | |||
![]() Avnet Abacus | ERM03H72 | Advanced Energy Industries Inc | Isolated Through Hole DCDC Converter Railway 75 W 1 Output Fixed 24 V 3125 A Regulated (Alt: ERM03H72) RoHS : Compliant | 0 | ||
| ERM03H72-HS | Advanced Energy Industries Inc | Isolated Through Hole DCDC Converter Railway 75 W 1 Output Fixed 24 V 3125 A Regulated (Alt: ERM03H72-HS) RoHS : Compliant | 0 | |||
| H72400830000G | Amphenol Corporation | (Alt: H72400830000G) RoHS : Compliant | 0 | |||
| YH7221510000G | Amphenol Corporation | (Alt: YH7221510000G) RoHS : Compliant | 0 | |||
| H72100830000G | Amphenol Corporation | (Alt: H72100830000G) RoHS : Compliant | 0 | |||
| YH7201510000G | Amphenol Corporation | (Alt: YH7201510000G) RoHS : Compliant | 0 | |||
| H72000830000G | Amphenol Corporation | (Alt: H72000830000G) RoHS : Compliant | 0 | |||
| LQG15WH72NJ02D | Murata Manufacturing Co Ltd | (Alt: LQG15WH72NJ02D) RoHS : Compliant | 0 | |||
| LQG15WH72NG02D | Murata Manufacturing Co Ltd | (Alt: LQG15WH72NG02D) RoHS : Compliant | 0 | |||
| FH72-21S-0.3SHW | Hirose Electric Co Ltd | (Alt: CL0580-5101-0-00) RoHS : Compliant | 0 | |||
| FH72-31S-0.3SHW | Hirose Electric Co Ltd | (Alt: CL0580-5102-0-00) RoHS : Compliant | 0 | |||
| FH72-11S-0.3SHW | Hirose Electric Co Ltd | (Alt: CL0580-5100-0-00) RoHS : Compliant | 0 | |||
| FH72-15S-0.3SHW | Hirose Electric Co Ltd | (Alt: CL0580-5104-0-00) RoHS : Compliant | 0 | |||
T491A475M010AH7280![]() | KEMET Corporation | - Tape and Reel (Alt: T491A475M010AH7280) RoHS : Not Compliant | 0 | |||
| FH72-21S-0.3SHW(99) | Hirose Electric Co Ltd | (Alt: CL0580-5101-0-99) RoHS : Compliant | 0 | |||
![]() Avnet Asia | CDEPH7212NP-R18LC | Sumida Corporation | Ind Power Shielded Wirewound 0.18uH 15% 1MHz 75A T/R (Alt: CDEPH7212NP-R18LC) RoHS : Compliant | 0 | ||
| TS2GSH72V6B | Transcend Information Inc | 16GB DDR4-2666 ECC DIMM (Alt: TS2GSH72V6B) RoHS : Compliant | 0 | |||
| SFH 7250 | ams OSRAM Group | LED IrLED 4-Pin SMD T/R (Alt: SFH 7250) RoHS : Compliant | 0 | |||
| H7229NLT | Pulse Electronics Corporation | (Alt: H7229NLT) RoHS : Compliant | 0 | |||
![]() Avnet Silica | STM32H723ZGT6TR | STMicroelectronics | ARM MCU 32bit ARM CortexM7F 550 MHz 1 MB 176 KB 144 Pins LQFP (Alt: STM32H723ZGT6TR) RoHS : Compliant | 2,500 | ||
| STM32H723ZGI6 | STMicroelectronics | ARM MCU STM32 Family STM32H7 Series Microcontrollers ARM CortexM7F 32 bit 550 MHz 1 MB (Alt: STM32H723ZGI6) RoHS : Compliant | 2,080 | |||
| STM32H725AGI6 | STMicroelectronics | ARM MCU STM32 Family STM32H7 Series Microcontrollers ARM CortexM7F 32 bit 550 MHz 1 MB (Alt: STM32H725AGI6) RoHS : Compliant | 1,248 | |||
| STM32H723ZGT6 | STMicroelectronics | ARM MCU STM32 Family STM32H7 Series Microcontrollers ARM CortexM7F 32 bit 550 MHz 1 MB (Alt: STM32H723ZGT6) RoHS : Compliant | 900 | |||
| STM32H723VET6 | STMicroelectronics | ARM MCU STM32 Family STM32H7 Series Microcontrollers ARM CortexM7F 32 bit 550 MHz 512 KB (Alt: STM32H723VET6) RoHS : Compliant | 630 | |||
| STM32H725VET6 | STMicroelectronics | (Alt: STM32H725VET6) RoHS : Compliant | 450 | |||
| STM32H723ZET6 | STMicroelectronics | (Alt: STM32H723ZET6) RoHS : Compliant | 360 | |||
| STM32H725ZGT3 | STMicroelectronics | ARM MCU 32bit ARM CortexM7F 550 MHz 1 MB 176 KB 144 Pins LQFP (Alt: STM32H725ZGT3) RoHS : Compliant | 300 | |||
| STM32H725REV6 | STMicroelectronics | (Alt: STM32H725REV6) RoHS : Compliant | 260 | |||
| STM32H725RGV6 | STMicroelectronics | (Alt: STM32H725RGV6) RoHS : Compliant | 0 | |||
| MCP6H72T-E/SN | Microchip Technology Inc | (Alt: MCP6H72T-E/SN) RoHS : Compliant | 0 | |||
| STM32H725IEK6 | STMicroelectronics | (Alt: STM32H725IEK6) RoHS : Compliant | 0 | |||
| STM32H725VGT6 | STMicroelectronics | ARM MCU STM32 Family STM32H7 Series Microcontrollers ARM CortexM7F 32 bit 550 MHz 1 MB (Alt: STM32H725VGT6) RoHS : Compliant | 0 | |||
| STM32H725VGT6TR | STMicroelectronics | (Alt: STM32H725VGT6TR) RoHS : Compliant | 0 | |||
| STM32H723VGT6TR | STMicroelectronics | (Alt: STM32H723VGT6TR) RoHS : Compliant | 0 | |||
![]() EBV Elektronik | SFH7250 | ams OSRAM Group | LED IrLED 4Pin SMD TR (Alt: Q65111A3188) RoHS : Compliant | 130,000 | ||
| STM32H725IGK3 | STMicroelectronics | MCU 32Bit ARM CortexM7 RISC 1024kByte Flash 162V to 36V 176Pin UFBGA Tray (Alt: STM32H725IGK3) RoHS : Compliant | 840 | |||
| STM32H723VEH6 | STMicroelectronics | (Alt: STM32H723VEH6) RoHS : Compliant | 348 | |||
| STM32H725VGT6 | STMicroelectronics | ARM MCU STM32 Family STM32H7 Series Microcontrollers ARM CortexM7F 32 bit 550 MHz 1 MB (Alt: STM32H725VGT6) RoHS : Compliant | 270 | |||
| STM32H725ZGT6 | STMicroelectronics | ARM MCU STM32 Family STM32H7 Series Microcontrollers ARM CortexM7F 32 bit 550 MHz 1 MB (Alt: STM32H725ZGT6) RoHS : Compliant | 120 | |||
| VOIH72AT | Vishay Intertechnologies | SOIC8 High Speed 25 MBD e3 (Alt: VOIH72AT) RoHS : Compliant | 0 | |||
| STM32H725AGI6 | STMicroelectronics | ARM MCU STM32 Family STM32H7 Series Microcontrollers ARM CortexM7F 32 bit 550 MHz 1 MB (Alt: STM32H725AGI6) RoHS : Compliant | 0 | |||
| STM32H725RGV6 | STMicroelectronics | (Alt: STM32H725RGV6) RoHS : Compliant | 0 | |||
| STM32H725IEK6 | STMicroelectronics | (Alt: STM32H725IEK6) RoHS : Compliant | 0 | |||
| STM32H723ZET6 | STMicroelectronics | (Alt: STM32H723ZET6) RoHS : Compliant | 0 | |||
| STM32H725ZGT6TR | STMicroelectronics | STM32H (Alt: STM32H725ZGT6TR) RoHS : Compliant | 0 | |||
| STM32H725ZGT3TR | STMicroelectronics | (Alt: STM32H725ZGT3TR) RoHS : Compliant | 0 | |||
| STM32H725VGT6TR | STMicroelectronics | (Alt: STM32H725VGT6TR) RoHS : Compliant | 0 | |||
| STM32H723VGT6TR | STMicroelectronics | (Alt: STM32H723VGT6TR) RoHS : Compliant | 0 | |||
| BCM15KA1HH0H725D | Broadcom Limited | BCM52311OP I52311A1 ILA 20M TCAM 512M SRAM 12GSerDes 900MHz Dual (Alt: BCM15KA1HH0H725D) RoHS : Compliant | 0 | |||
![]() Master Electronics | SF4B-H72G-01D<V2> | Panasonic Electronic Components | RoHS : Compliant |
| 0 | |
| TFSD-30-28-H-72.16-SL | Samtec Inc | RoHS : Compliant |
| 0 | ||
| SFSD-10-28-H-72.00-DR-NDS | Samtec Inc | .050 Tiger Eye™ Double Row Discrete Wire Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| SFSD-40-28-H-72.00-DR-NUS | Samtec Inc | RoHS : Compliant |
| 0 | ||
| SFSDT-15-28-H-72.00-S | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TFSD-14-28-H-72.00-T-NDS | Samtec Inc | RoHS : Compliant |
| 0 | ||
| SFSD-15-28-H-72.00-DS-NDX | Samtec Inc | .050 Tiger Eye™ Double Row Discrete Wire Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| SFSD-50-30-H-72.00-DR-NDS | Samtec Inc | Cable Assembly Discrete Wire 1.829m 100 POS Discrete Wire Housing to 100 POS Discrete Wire Housing RCP-RCP RoHS : Compliant |
| 0 | ||
| SFSDT-25-28-H-72.00-D-NDX | Samtec Inc | RoHS : Compliant |
| 0 | ||
| SFSDT-30-28-H-72.00-S | Samtec Inc | .050 TIGER EYE DOUBLE RoHS : Compliant |
| 0 | ||
| TFSD-20-28C-H-72.00-T-NUX | Samtec Inc | RoHS : Compliant |
| 0 | ||
| TFSDT-20-28-H-72.00-SL | Samtec Inc | .050 TIGER EYE DOUBLE RoHS : Compliant |
| 0 | ||
| SFSD-30-28-H-72.00-S | Samtec Inc | .050 Tiger Eye™ Double Row Discrete Wire Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| SFSD-40-28C-H-72.00-S | Samtec Inc | RoHS : Compliant |
| 0 | ||
| SFSS-03-28C-H-72.00-DR-NUS | Samtec Inc | .050 TIGER EYE SINGLE RoHS : Compliant |
| 0 | ||
![]() Neutron USA | PP2-1H7-2A2 | E-Switch Inc | Snap-Action Switch,PP2 Series,DPDT,ON-(ON),White Plunger,16A,125VAC,.187" QC RoHS : Compliant |
| 50 | |
| TS2GSH72V1B | Transcend Information Inc | 16GB DDR4 2133 ECC SO-DIMM 2RX8 |
| 0 | ||
| SH724LMV | ABB Low Voltage Products and Systems | Terminal Block Tools & Accessories B24 SIDE ENT SGL LOCK SYS 1XPG29-1 |
| 0 | ||
| R2E133-BH72-13 | ebm-papst | Blowers 133mm 115VAC 180CFM |
| 0 | ||
![]() Pasternack Enterprises US | PE3C8741/WH-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-WH, RF Cable Type: Belden 4694R-WH, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 12G SDI Cable 72 Inch Length Using 75 Ohm 4694R-WH Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 72 inch length using 75 Ohm 4694R-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 72 inch length using 75 Ohm 4694R-WH coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 12G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8741/WH-72, can also be known as a 12G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8741/WH-72 is built with belden 4694R-WH which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 72 inch length using 75 Ohm 4694R-WH coax. |
| 146 | |
| PE3C8743/WH-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-WH, RF Cable Type: Belden 4694R-WH, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 72 Inch Length Using 75 Ohm 4694R-WH Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4694R-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4694R-WH coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8743/WH-72, can also be known as a 12G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8743/WH-72 is built with belden 4694R-WH which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8743/WH-72 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 12G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4694R-WH coax. |
| 146 | ||
| PE3C8746/WH-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-WH, RF Cable Type: Belden 4694R-WH, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 72 Inch Length Using 75 Ohm 4694R-WH Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4694R-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4694R-WH coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8746/WH-72, can also be known as a 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8746/WH-72 is built with belden 4694R-WH which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4694R-WH coax. |
| 105 | ||
| PE3C8815/WH-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-WH coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/WH-72, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/WH-72 is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/WH-72 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-WH coax. |
| 100 | ||
| PE3C8818/WH-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-WH coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8818/WH-72, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8818/WH-72 is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-WH coax. |
| 100 | ||
| PE3C8813/WH-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1694A-WH coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8813/WH-72, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8813/WH-72 is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1694A-WH coax. |
| 100 | ||
| PE3C8874/WH-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-WH, RF Cable Type: Belden 1855A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1855A-WH Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1855A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1855A-WH coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/WH-72, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/WH-72 is built with Belden 1855A-WH which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/WH-72 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1855A-WH coax. |
| 89 | ||
| PE3C8748/WH-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-WH, RF Cable Type: Belden 4855R-WH, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 72 Inch Length Using 75 Ohm 4855R-WH Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4855R-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4855R-WH coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8748/WH-72, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8748/WH-72 is built with belden 4855R-WH which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8748/WH-72 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4855R-WH coax. |
| 89 | ||
| PE3C8875/WH-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-WH, RF Cable Type: Belden 1855A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1855A-WH Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-WH coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/WH-72, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/WH-72 is built with Belden 1855A-WH which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-WH coax. |
| 51 | ||
| PE3C8749/WH-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-WH, RF Cable Type: Belden 4855R-WH, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 12G SDI Cable 72 Inch Length Using 75 Ohm 4855R-WH Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 72 inch length using 75 Ohm 4855R-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 72 inch length using 75 Ohm 4855R-WH coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 12G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8749/WH-72, can also be known as a 12G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8749/WH-72 is built with belden 4855R-WH which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 72 inch length using 75 Ohm 4855R-WH coax. |
| 51 | ||
| PE3C8873/WH-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-WH, RF Cable Type: Belden 1855A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1855A-WH Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-WH coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8873/WH-72, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8873/WH-72 is built with Belden 1855A-WH which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-WH coax. |
| 44 | ||
| PE3C8745/WH-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-WH, RF Cable Type: Belden 4694R-WH, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 72 Inch Length Using 75 Ohm 4694R-WH Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4694R-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4694R-WH coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8745/WH-72, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8745/WH-72 is built with belden 4694R-WH which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8745/WH-72 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 72 inch length using 75 Ohm 4694R-WH coax. |
| 0 | ||
| PE3C8817/WH-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-WH, RF Cable Type: Belden 1694A-WH, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1694A-WH Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-WH coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8817/WH-72, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8817/WH-72 is built with Belden 1694A-WH which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8817/WH-72 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1694A-WH coax. |
| 0 | ||
| PE3C8744/WH-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-WH, RF Cable Type: Belden 4694R-WH, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 72 Inch Length Using 75 Ohm 4694R-WH Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 72 inch length using 75 Ohm 4694R-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 72 inch length using 75 Ohm 4694R-WH coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8744/WH-72, can also be known as a 12G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8744/WH-72 is built with belden 4694R-WH which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 72 inch length using 75 Ohm 4694R-WH coax. |
| 0 | ||
| PE3C8742/WH-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-WH, RF Cable Type: Belden 4694R-WH, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 72 Inch Length Using 75 Ohm 4694R-WH Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm HD-BNC male 12G SDI cable 72 inch length using 75 Ohm 4694R-WH coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm HD-BNC male 12G SDI cable 72 inch length using 75 Ohm 4694R-WH coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to HD-BNC cable is a male to male coax assembly, PE3C8742/WH-72, can also be known as a 12G SDI BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to HD-BNC plug cable assembly PE3C8742/WH-72 is built with belden 4694R-WH which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8742/WH-72 can also be used in the other direction and will be HD-BNC male to BNC male cable assembly if the opposite connectivity is required. 12G SDI BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm HD-BNC male 12G SDI cable 72 inch length using 75 Ohm 4694R-WH coax. |
| 0 | ||
![]() TE Connectivity | SBCH722RJ | TE Connectivity | SBCH 7 22R 5% Resistance Value: 22 Ω Element Type: Wire Wound Resistor Type: Power Resistor Passive Component Tolerance: 5 % Power Rating: 7 W Wirewound Resistor: Axial Mount & 17 Watt | 22 Ω Wire Wound Power Resistor 5 % | Part Number: SBCH722RJ | Internal Number: 1623727-2 | TE Connectivity RoHS : Compliant |
| 314 | |
![]() Vyrian | STM32H725IGK3 | STMicroelectronics | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M7 CPU, 550MHz, CMOS, PBGA201 RoHS : Compliant | 11,868 | ||
| MCP6H72-E/SN | Microchip Technology Inc | Operational Amplifier, 2 Func, 4000uV Offset-Max, CMOS, PDSO8 RoHS : Compliant | 10,861 | |||
| SNC54H72J | Texas Instruments | J-K Flip-Flop, 1-Func, Master-slave Triggered, TTL, CDIP14 RoHS : Not Compliant | 9,577 | |||
SNJ54H72W![]() | Texas Instruments | J-K Flip-Flop, TTL/H/L Series, 1-Func, Negative Edge Triggered, 2-Bit, Complementary Output, TTL, CDFP14 RoHS : Not Compliant | 8,592 | |||
LMH7220MGX![]() | Texas Instruments | Comparator, 1 Func, 9500uV Offset-Max, 3.63ns Response Time, PDSO6 RoHS : Not Compliant | 8,152 | |||
| STM32H725RGV6 | STMicroelectronics | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M7 CPU, 550MHz, CMOS RoHS : Compliant | 8,042 | |||
| STM32H725VGY6TR | STMicroelectronics | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M7 CPU, 550MHz, CMOS, PBGA115 RoHS : Compliant | 7,090 | |||
| STM32H725ZGT6TR | STMicroelectronics | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M7 CPU, 550MHz, CMOS, PQFP144 RoHS : Compliant | 7,057 | |||
| SN74H72N3 | Texas Instruments | J-K Flip-Flop, 1-Func, Master-slave Triggered, TTL, PDIP14 RoHS : Not Compliant | 6,078 | |||
SN74H72N-10![]() | Texas Instruments | J-K Flip-Flop, TTL/H/L Series, 1-Func, Negative Edge Triggered, 2-Bit, Complementary Output, TTL, PDIP14 | 6,022 | |||
| SN74H72N1 | Texas Instruments | J-K Flip-Flop, 1-Func, Master-slave Triggered, TTL, PDIP14 RoHS : Not Compliant | 4,699 | |||
| STM32H725IEK6 | STMicroelectronics | RISC Microcontroller, 32-Bit, FLASH, CORTEX-M7 CPU, 550MHz, CMOS, PBGA201 RoHS : Compliant | 4,471 | |||
SN54H72W-10![]() | Texas Instruments | J-K Flip-Flop, TTL/H/L Series, 1-Func, Negative Edge Triggered, 2-Bit, Complementary Output, TTL, CDFP14 | 3,679 | |||
IXGH72N60A3![]() | IXYS Corporation | Insulated Gate Bipolar Transistor, 75A I(C), 600V V(BR)CES, N-Channel, TO-247AD RoHS : Compliant | 677 | |||
| STM32H723VGT6TR | STMicroelectronics | RISC Microcontroller RoHS : Compliant | 322 | |||
![]() Win Source Electronics | STM32H723VGT6 | STMicroelectronics | IC MCU 32BIT 1MB FLASH 100LQFP / ARM® Cortex®-M7 STM32H7 Microcontroller IC 32-Bit Single-Core 550MHz 1MB (1M x 8) FLASH 100-LQFP (14x14) RoHS : Compliant |
| 30,000 | |
| STM32H723VET6 | STMicroelectronics | IC MCU 32BIT 512KB FLASH 100LQFP / ARM® Cortex®-M7 series Microcontroller IC 32-Bit Single-Core 550MHz 512KB (512K x 8) FLASH 100-LQFP (14x14) RoHS : Compliant |
| 15,000 | ||
| STM32H723ZET6 | STMicroelectronics | CONTROLLER / PROCESSOR / ARM® Cortex®-M7 STM32H7 Microcontroller IC 32-Bit 550MHz 512KB (512K x 8) FLASH 144-LQFP (20x20) RoHS : Compliant |
| 10,995 | ||
| STM32H723ZGT6 | STMicroelectronics | IC MCU 32BIT 1MB FLASH 144LQFP / ARM® Cortex®-M7 series Microcontroller IC 32-Bit Single-Core 550MHz 1MB (1M x 8) FLASH 144-LQFP (20x20) RoHS : Compliant |
| 10,080 | ||
| STM32H723ZGT6TR | STMicroelectronics | IC MCU 32BIT 1MB FLASH 144LQFP RoHS : Compliant |
| 9,600 | ||
| STM32H723VGH6 | STMicroelectronics | HIGH-PERFORMANCE AND DSP WITH DP / ARM® Cortex®-M7 series Microcontroller IC 32-Bit Single-Core 550MHz 1MB (1M x 8) FLASH 100-TFBGA (8x8) RoHS : Compliant |
| 6,676 | ||
| STM32H725ZGT6 | STMicroelectronics | IC MCU 32BIT 1MB FLASH 144LQFP / ARM® Cortex®-M7 series Microcontroller IC 32-Bit Single-Core 550MHz 1MB (1M x 8) FLASH 144-LQFP (20x20) RoHS : Compliant |
| 3,880 | ||
BH7240AKV-E2![]() | ROHM Semiconductor | IC ENCOD COLOR TV SGNL VQFP48 TR RoHS : Compliant |
| 2,519 | ||
| STM32H725IGT6 | STMicroelectronics | IC MCU 32BIT 1MB FLASH 176LQFP RoHS : Compliant |
| 2,478 | ||
| STM32H725IGK6 | STMicroelectronics | IC MCU 32BIT 1MB FLASH 176UFBGA / ARM® Cortex®-M7 STM32H7 Microcontroller IC 32-Bit Single-Core 550MHz 1MB (1M x 8) FLASH 176+25UFBGA (10x10) RoHS : Compliant |
| 2,372 | ||
| STM32H725VGH6 | STMicroelectronics | CONTROLLER / PROCESSOR RoHS : Compliant |
| 1,800 | ||
| STM32H725IGK3 | STMicroelectronics | CONTROLLER / PROCESSOR / ARM® Cortex®-M7 STM32H7 Microcontroller IC 32-Bit 550MHz 1MB (1M x 8) FLASH 176+25UFBGA (10x10) RoHS : Compliant |
| 1,443 |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |