| поискавой системы для электроныых деталей |
|
D120/6-HT2-R дистрибьютор |
| дистрибьютор | номер детали | производитель | подробное описание детали | Price | Qty. BuyNow | |
![]() ComSIT USA | CD1206-B240 | Bourns Inc | Rectifier Single Schottky 40V 2A 1206 T/R RoHS : Compliant | 12,000 | ||
| RK73H2AHTTD1201F | KOA Speer Electronics Inc | Electronic Component RoHS : Compliant | 5,000 | |||
| SD1206S040S2R0 | Kyocera AVX Components | SCHOTTKY BARRIER RECTIFIER DIODE Rectifier Diode, Schottky, 1 Phase, 1 Element, 2A, 40V V(RRM), Silicon RoHS : Compliant | 3,000 | |||
STD120N4F6![]() | STMicroelectronics | Power Field-Effect Transistor, 80A I(D), 40V, 0.004ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-252 RoHS : Compliant | 2,500 | |||
| VESD1202VG08 | Vishay Intertechnologies | SINGLE ESD-PROTECTION DIODE IN SOD-523 Trans Voltage Suppressor Diode, 25W, 12V V(RWM), Unidirectional, 1 Element, Silicon RoHS : Compliant | 2,425 | |||
| B59901D120A40Z15 | TDK Electronics | PTC THERMISTOR FOR LIMIT TEMPERATURE SENSORS PTC Thermistor, 550ohm, Through Hole Mount RoHS : Compliant | 1,400 | |||
| MW4503GD120075 | Samtec Inc | 1 MM X 1 MM CENTERLINE SURFACE MOUNT BOARD STACKER ASSEMBLY Board Stacking Connector, 90 Contact(s), 2 Row(s), Male, Straight, Surface Mount Terminal RoHS : Not Compliant | 1,200 | |||
IRFD120![]() | Vishay Siliconix | Small Signal Field-Effect Transistor, 1.3A I(D), 100V, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET RoHS : Not Compliant | 800 | |||
CDCLVD1204RGTR![]() | Texas Instruments | Low Skew Clock Driver, CDC Series, 4 True Output(s), 0 Inverted Output(s), PQCC16 RoHS : Compliant | 770 | |||
| YMD12065V | qinlong | Electronic Component RoHS : Compliant | 97 | |||
| BBD120GA | Samtec Inc | (2.54 MM) .100 INCH MACHINED BOARD STACKING STRIP Board Connector, 40 Contact(s), 2 Row(s), Male, Straight, 0.1 inch Pitch, Solder Terminal, Black Insulator, Receptacle RoHS : Compliant | 68 | |||
| PSD1204PBB1A | SUNON USA | Electronic Component RoHS : Not Compliant | 30 | |||
| SED1200F0B | Seiko Epson Corporation | CMOS DOT MATRIX LCD CONTROLLER DRIVER Dot Matrix LCD Driver, 16 X 50 Dots, CMOS, PQFP80 RoHS : Not Compliant | 25 | |||
| BSM35GD120DN2E3224 | Infineon Technologies AG | IGBT POWER MODULE Insulated Gate Bipolar Transistor, 50A I(C), 1200V V(BR)CES, N-Channel RoHS : Compliant | 14 | |||
| BSM25GD120DLCE3224 | Eupec Gmbh & Co Kg | IGBT-MODULE Insulated Gate Bipolar Transistor, 50A I(C), 1200V V(BR)CES, N-Channel RoHS : Not Compliant | 10 | |||
![]() GLYN GmbH & Co. KG | TCD1205DG(8,ZK) | Toshiba America Electronic Components | CCD Linear Image Sensor | 3,500 | ||
![]() Interstate Connecting Components | PL00Y-500-30D120 | Amphenol Technical Products International | 0 | |||
| 275275150D120 | Amphenol Technical Products International | 0 | ||||
| PL00X-500-30D120 | Amphenol Technical Products International | 0 | ||||
| 97D1-20-1-ZB | TE Connectivity | 97D1-20-1-ZB | 0 | |||
| CV1981-ATPID120V1600W- | TE Connectivity | CV1981-ATPID120V1600W-CEE | 0 | |||
| DD120190598 | ITT Interconnect Solutions | DD120190598 | 0 | |||
| G55D1-2003-0000 | Glenair Inc | 0 | ||||
| AT06-2S-LED1201 | Amphenol Sine Systems | PLUG,2-WAY,LED 12V,CLEAR |
| 0 | ||
| 448HS130NF1504D120 | Glenair Inc | EMI/RFI CONN.ACCESSY | 0 | |||
| G55D1-2004-0000 | Glenair Inc | 0 | ||||
| BTD1-20-10-1-ZB-SB | TE Connectivity | BTD1-20-10-1-ZB-SB RoHS : Compliant | 0 | |||
| D120190184 | ITT Interconnect Solutions | D120190184 | 0 | |||
| 64HD-1201021120 | TE Connectivity | 64HD-1201021120: CTO-12000000- | 0 | |||
| SLPHPD120BSB1 | Amphenol Industrial Operations | SL + 12 PLUG 230 SQ BK SEAL K1 |
| 0 | ||
| 550T006M2F0D1-20 | Glenair Inc | RoHS : Compliant | 0 | |||
![]() NexGen Digital | MMBD1204 | onsemi | RoHS : Compliant | 27,002 | ||
MMBD1203![]() | Fairchild Semiconductor Corporation | RoHS : Compliant | 19,000 | |||
STD120N4LF6![]() | STMicroelectronics | RoHS : Compliant | 4,922 | |||
| MMBD1205 | onsemi | RoHS : Compliant | 2,498 | |||
| PFC-D1206LF-03-10031003F | TT Electronics Resistors | 2,356 | ||||
| HFE21-D120/24-DT2-R(257) | Xiamen Hongfa Electroacoustic Co.,Ltd. | 2,304 | ||||
| MMBD1203 | onsemi | RoHS : Compliant | 2,003 | |||
| IRLD120 | International Rectifier | RoHS : Not Compliant | 141 | |||
| DS1220AD-120+ | Maxim Integrated Products | RoHS : Compliant | 73 | |||
AM29LV017D-120EC![]() | AMD | RoHS : Not Compliant | 11 | |||
AM29F016D-120EC![]() | AMD | RoHS : Not Compliant | 8 | |||
![]() PEI Genesis | S4100E09D12.0S04L00 | SOURIAU-SUNBANK |
| 0 | ||
| SE16D1208A3.0R12 | SOURIAU-SUNBANK |
| 0 | |||
| DD120190-530 | ITT Interconnect Solutions |
| 0 | |||
| AT06-2S-LED1201 | Amphenol Sine Systems |
| 0 | |||
| SE1D1208A-1.5-8 | SOURIAU-SUNBANK |
| 0 | |||
| S4101P13D12.0S34-00 | SOURIAU-SUNBANK |
| 0 | |||
| S4100E11D12.0S08L04 | SOURIAU-SUNBANK |
| 0 | |||
| D120190-184-V | ITT Interconnect Solutions |
| 0 | |||
| SE56D1206AS-34 | SOURIAU-SUNBANK |
| 0 | |||
| SE23D1203-34 | SOURIAU-SUNBANK |
| 0 | |||
| SIM2B25D120CE | Amphenol Aerospace |
| 0 | |||
| IP-RD120 | Sure Seal Connections |
| 0 | |||
| AT06-2S-LED1201KIT | Amphenol Sine Systems |
| 0 | |||
| SE17D1204-2.5-8 | SOURIAU-SUNBANK |
| 0 | |||
| LCD-120-5200U | Amphenol Socapex |
| 0 | |||
![]() Powell Electronics | MTLW-105-05-G-D-120 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 917 | |
| MTLW-106-06-G-D-120 | Samtec Inc | .100 Low Prof Variable Post Height Termi RoHS : Compliant |
| 807 | ||
| MTMM-106-02-T-D-120 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 380 | ||
| MTMM-108-04-L-D-120 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 341 | ||
| MTMM-107-02-G-D-120 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 336 | ||
| MTLW-118-05-G-D-120 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 290 | ||
| MTLW-107-06-L-D-120 | Samtec Inc | PCB Header, 2.00mm Pitch, Through-Hole, RoHS : Compliant |
| 232 | ||
| HMTSW-103-07-G-D-120-RA-LL | Samtec Inc | .100" High-Temp Variable Post Height Ter RoHS : Compliant |
| 164 | ||
| MTLW-112-08-L-D-120 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 162 | ||
| MTMM-122-02-L-D-120 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 117 | ||
| MTSW-113-07-S-D-120-RA | Samtec Inc | Variable Height PCB Header Strips, 0.100 RoHS : Compliant |
| 86 | ||
| ZSS-104-08-L-D-1200 | Samtec Inc | .100 Surface Mount Terminal Strip RoHS : Compliant |
| 85 | ||
| MTMM-150-05-T-D-120 | Samtec Inc | Connector Header RoHS : Compliant |
| 84 | ||
| MTMM-135-02-L-D-120 | Samtec Inc | PCB Header, 2.00mm Pitch, SMT, Male, Mal RoHS : Compliant |
| 59 | ||
| MTMM-140-03-G-D-120-001 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 46 | ||
![]() Richardson RFPD | R0.25D12-0509/H | RECOM Power GmbH | Module DC-DC 5VIN 2-OUT 9V/-9V 0.014A/-0.014A 0.25 RoHS : Compliant |
| 0 | |
| R0.25D12-0515 | RECOM Power GmbH | Module DC-DC 5VIN 2-OUT -15V/15V -0.0083A/0.0083A RoHS : Compliant |
| 0 | ||
| R0.5D12-0512/P | RECOM Power GmbH | Module DC-DC 5VIN 2-OUT -12V/12V -0.021A/0.021A 0. RoHS : Compliant |
| 0 | ||
| R0.5D12-0515/P-R | RECOM Power GmbH | Module DC-DC 5VIN 2-OUT 15V/-15V 0.017A/-0.017A 0. RoHS : Compliant |
| 0 | ||
| R2D-1209/P | RECOM Power GmbH | Module DC-DC 12VIN 2-OUT 9V/-9V 0.111A/-0.111A 2W RoHS : Compliant |
| 0 | ||
| MEA1D1205SC | Murata Manufacturing Co Ltd | Module DC-DC 12VIN 2-OUT -5V/5V -0.1A/0.1A 1W 5-Pi RoHS : Compliant | 0 | |||
| SI5345A-D12022-GMR | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 1028MHz-OUT RoHS : Compliant | 0 | |||
| R1D-1209-R | RECOM Power GmbH | Module DC-DC 12VIN 2-OUT -9V/9V -0.056A/0.056A 1W RoHS : Compliant |
| 0 | ||
| R0.25D-1205/H-R | RECOM Power GmbH | Module DC-DC 12VIN 2-OUT 5V/-5V 0.025A/-0.025A 0.2 RoHS : Compliant |
| 0 | ||
| R0.25D12-0505-R | RECOM Power GmbH | Module DC-DC 5VIN 2-OUT 5V/-5V 0.025A/-0.025A 0.25 RoHS : Compliant |
| 0 | ||
| R1D-1209/P-R | RECOM Power GmbH | Module DC-DC 12VIN 2-OUT 9V/-9V 0.056A/-0.056A 1W RoHS : Compliant |
| 0 | ||
| R1D12-0512/HP | RECOM Power GmbH | Module DC-DC 5VIN 2-OUT 12V/-12V 0.042A/-0.042A 1W RoHS : Compliant | 0 | |||
| R2D12-0509/P-R | RECOM Power GmbH | Module DC-DC 5VIN 2-OUT -9V/9V -0.111A/0.111A 2W M RoHS : Compliant |
| 0 | ||
| R2D12-0524/P | RECOM Power GmbH | Module DC-DC 5VIN 2-OUT 24V/-24V -0.042A/0.042A 2W RoHS : Compliant |
| 0 | ||
| RD-1205D/P | RECOM Power GmbH | Module DC-DC 12VIN 2-OUT 5V/-5V 0.2A/-0.2A 2W 5-Pi RoHS : Compliant |
| 0 | ||
![]() Chip 1 Exchange | PESD1206Q140 | INSTOCK | 40,000 | |||
| D1201K4FCS | Draka Cableteq USA | INSTOCK | 20,000 | |||
| HC49-SMD-12.000MHZ | INSTOCK | 19,282 | ||||
| D12001KN-S-O | INSTOCK | 13,643 | ||||
| MCR01MZPD1202 | INSTOCK | 7,641 | ||||
| HC-49/US-SMD 12.000MHZ | JIYUE | INSTOCK | 6,900 | |||
| CN1J4KJTD120RK | KOA Speer Electronics Inc | INSTOCK | 5,000 | |||
| D12018KFCS | INSTOCK | 2,500 | ||||
| AM29LV017D120EC | INSTOCK | 1,007 | ||||
| ERJ2RHD1202X | INSTOCK | 629 | ||||
| AM29F016D-120ED | INSTOCK | 368 | ||||
| AM29F016D-120ED | SPAN | INSTOCK | 368 | |||
| AM29F016D-120FC | SPN | INSTOCK | 223 | |||
| IRFD120 | INSTOCK | 208 | ||||
| 10D1-20406 | INSTOCK | 8 | ||||
![]() Avnet Abacus | MCT06030D1202BP500 | Vishay Intertechnologies | SMD Chip Resistor 12 kohm 01 100 mW 0603 1608 Metric Thin Film Precision - Tape and Reel (Alt: MCT06030D1202BP500) RoHS : Compliant | 220,000 | ||
| MCS04020D1200BE000 | Vishay Intertechnologies | - Tape and Reel (Alt: MCS04020D1200BE000) RoHS : Compliant | 120,000 | |||
| RK73H1JTTD1201F | KOA Speer Electronics Inc | SMD Chip Resistor 12 kohm 1 100 mW 0603 1608 Metric Thick Film Precision - Tape and Reel (Alt: RK73H1JTTD1201F) RoHS : Compliant | 100,000 | |||
| RK73H1JTTD1202F | KOA Speer Electronics Inc | SMD Chip Resistor 12 kohm 1 100 mW 0603 1608 Metric Thick Film Precision - Tape and Reel (Alt: RK73H1JTTD1202F) RoHS : Compliant | 85,000 | |||
| RK73H1JTTD1200F | KOA Speer Electronics Inc | Res Precision Thick Film 0603 120 Ohm 1 18W 100ppmC Molded Paper TR - Tape and Reel (Alt: RK73H1JTTD1200F) RoHS : Compliant | 65,000 | |||
| MCS04020D1202BE000 | Vishay Intertechnologies | - Tape and Reel (Alt: MCS04020D1202BE000) RoHS : Compliant | 50,000 | |||
| MCS04020D1201BE000 | Vishay Intertechnologies | - Tape and Reel (Alt: MCS04020D1201BE000) RoHS : Compliant | 50,000 | |||
| MCU08050D1202BP500 | Vishay Intertechnologies | - Tape and Reel (Alt: MCU08050D1202BP500) RoHS : Compliant | 45,000 | |||
| MCS04020D1203BE000 | Vishay Intertechnologies | - Tape and Reel (Alt: MCS04020D1203BE000) RoHS : Compliant | 40,000 | |||
| MCT06030D1201BP500 | Vishay Intertechnologies | - Tape and Reel (Alt: MCT06030D1201BP500) RoHS : Compliant | 35,000 | |||
| RK73H2BTTD1200F | KOA Speer Electronics Inc | SMD Chip Resistor 120 ohm 1 250 mW 1206 3216 Metric Thick Film Precision - Tape and Reel (Alt: RK73H2BTTD1200F) RoHS : Compliant | 25,000 | |||
| ERA2AKD120X | Panasonic Electronic Components | SMD Chip Resistor 12 ohm 05 63 mW 0402 1005 Metric Metal Film Thin Film - Tape and Reel (Alt: ERA2AKD120X) RoHS : Compliant | 20,000 | |||
| SMM02040D1202BB300 | Vishay Intertechnologies | - Tape and Reel (Alt: SMM02040D1202BB300) RoHS : Compliant | 18,000 | |||
| RN73H2ATTD1202D25 | KOA Speer Electronics Inc | - Tape and Reel (Alt: RN73H2ATTD1202D25) RoHS : Compliant | 5,000 | |||
| MTLW-110-06-T-D-120 | Samtec Inc | Pin Header BoardtoBoard 254 mm 2 Rows 20 Contacts Through Hole MTLW Series (Alt: MTLW-110-06-T-D-120) RoHS : Compliant | 893 | |||
![]() Avnet Asia | SD1206S040S2R0 | Kyocera AVX Components | Schottky Rectifier, 40 V, 2 A, Single, SOD-123, 2 Pins, 500 mV (Alt: SD1206S040S2R0) RoHS : Compliant | 9,000 | ||
| GSB31D12021HHR | Amphenol Corporation | Conn USB Type A RCP 9 POS 2mm RA Through Hole 1 Port Tray (Alt: GSB31D12021HHR) RoHS : Compliant |
| 100 | ||
| RK73H2BTTD1202F | KOA Speer Electronics Inc | Res Precision Thick Film 1206 12k Ohm 1% 1/4W ?100ppm/?C Molded Paper T/R (Alt: RK73H2BTTD1202F) RoHS : Compliant | 0 | |||
| 9AD1201H12 | SANYO Semiconductor Co Ltd | AC Fan Ball Bearing 100V to 240V 0.08A 4.4W 3250RPM 106CFM 42dB Flange Mount (Alt: 9AD1201H12) RoHS : Compliant | 0 | |||
| GPFLD12030000HR | Amphenol Corporation | CONN BOARD MOUNT CONN 12P+12S R/A AU30 (Alt: GPFLD12030000HR) RoHS : Compliant | 0 | |||
| FDD120AN15A0 | onsemi | (Alt: FDD120AN15A0) RoHS : Compliant | 0 | |||
| MMA02040D1203DB000 | Vishay Intertechnologies | (Alt: MMA02040D1203DB000) RoHS : Compliant | 0 | |||
| MMBD1204 | onsemi | Small Signal Diode, Dual Common Cathode, 100 V, 200 mA, 1.1 V, 4 ns, 2 A (Alt: MMBD1204) RoHS : Compliant | 0 | |||
| SG73P2BTTD120J | KOA Speer Electronics Inc | (Alt: SG73P2BTTD120J) RoHS : Compliant | 0 | |||
| BUK9D120-60PX | Nexperia | (Alt: BUK9D120-60PX) RoHS : Compliant | 0 | |||
| AMA150D-120125GY(CM) | Aimtec | ATKAMA150D-120125GY(CM) BRAND-NEW AC/DC (Alt: AMA150D-120125GY(CM)) RoHS : Compliant | 0 | |||
| NCS6D1205C | Murata Manufacturing Co Ltd | (Alt: NCS6D1205C) RoHS : Compliant | 0 | |||
| MTMM-110-03-S-D-120 | Samtec Inc | (Alt: MTMM-110-03-S-D-120) RoHS : Compliant | 0 | |||
| MCT06030D1201BP500 | Vishay Intertechnologies | (Alt: MCT06030D1201BP500) RoHS : Compliant | 0 | |||
| ILD1207T | Vishay Intertechnologies | (Alt: ILD1207T) RoHS : Compliant |
| 0 | ||
![]() Avnet Silica | LED1202JR | STMicroelectronics | LED Driver 12 Outputs 26V to 5V in 5V240mA out WLCSP20 (Alt: LED1202JR) RoHS : Compliant | 36,000 | ||
| BUK6D120-60PX | Nexperia | Power MOSFET P Channel 60 V 8 A 0095 ohm SOT1220 Surface Mount (Alt: BUK6D120-60PX) RoHS : Compliant | 12,000 | |||
| LED1202QTR | STMicroelectronics | LED Driver DCDC Isolated 26 V to 5 V 240 mA 5 V 400 kHz 20 Pins QFN (Alt: LED1202QTR) RoHS : Compliant | 8,000 | |||
| MMBD1204 | onsemi | Small Signal Diode Dual Common Cathode 100 V 200 mA 11 V 4 ns 2 A (Alt: MMBD1204) RoHS : Compliant | 6,000 | |||
STD120N4F6![]() | STMicroelectronics | (Alt: STD120N4F6) RoHS : Compliant | 2,500 | |||
| DGTD120T25S1PT | Diodes Incorporated | Trans IGBT Chip NCH 12KV 50A 3Pin TO247 ThruHole Tube (Alt: DGTD120T25S1PT) RoHS : Compliant | 450 | |||
| UJ3D1202ZW | onsemi | 2A 1200V SiC Schottky Diode (Alt: UJ3D1202ZW) RoHS : Compliant | 0 | |||
| APT60D120BG | Microchip Technology Inc | (Alt: APT60D120BG) RoHS : Compliant | 0 | |||
| FDD120AN15A0 | onsemi | NChannel PowerTrench MOSFET 150V 14A 120m (Alt: FDD120AN15A0) RoHS : Compliant | 0 | |||
| APT2X61D120J | Microchip Technology Inc | (Alt: APT2X61D120J) RoHS : Not Compliant | 0 | |||
| APT2X60D120J | Microchip Technology Inc | (Alt: APT2X60D120J) RoHS : Compliant | 0 | |||
| BUK6D120-40EX | Nexperia | (Alt: BUK6D120-40EX) RoHS : Compliant | 0 | |||
| BUK9D120-60PX | Nexperia | (Alt: BUK9D120-60PX) RoHS : Compliant | 0 | |||
| DGTD120T40S1PT | Diodes Incorporated | Trans IGBT Chip NCH 12KV 80A 3Pin TO247 ThruHole Tube (Alt: DGTD120T40S1PT) RoHS : Compliant | 0 | |||
| SMJD-1208004H-X41500B34H057ALL | Seoul Semiconductor | DC Module 2X2 zhaga book 15 Package SZ5M4WWC7 83W Lumen 1340 CCT 2700K CRI70 5 STEP (Alt: SMJD-1208004H-X41500B34H057ALL) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | AM1D-120505DZ![]() | Aimtec | RoHS : Compliant |
| 0 | |
AM1D-1205DH30Z![]() | Aimtec | RoHS : Compliant |
| 0 | ||
AM1D-1207SH60Z![]() | Aimtec | RoHS : Compliant |
| 0 | ||
AM1D-1209D-RZ![]() | Aimtec | RoHS : Compliant |
| 0 | ||
AM2D-1203DH60Z![]() | Aimtec | RoHS : Compliant |
| 0 | ||
AM2D-1207DZ![]() | Aimtec | RoHS : Compliant |
| 0 | ||
AM1D-1205DH30-RZ![]() | Aimtec | RoHS : Compliant |
| 0 | ||
| AM2D-1205D-RZ | Aimtec | RoHS : Compliant |
| 0 | ||
AM2D-1207DH52Z![]() | Aimtec | RoHS : Compliant |
| 0 | ||
AM1D-1205DH52Z![]() | Aimtec | RoHS : Compliant |
| 0 | ||
AM2D-1205SH30Z![]() | Aimtec | RoHS : Compliant |
| 0 | ||
AM2D-1209DH40Z![]() | Aimtec | RoHS : Compliant |
| 0 | ||
AM1D-120303DZ![]() | Aimtec | RoHS : Compliant |
| 0 | ||
AM1D-1203SZ![]() | Aimtec | RoHS : Compliant |
| 0 | ||
AM1D-1207DH52Z![]() | Aimtec | RoHS : Compliant |
| 0 | ||
![]() Chip-Germany GmbH | FDD120AN15A0![]() | Fairchild Semiconductor Corporation | RoHS : Compliant | 17 | ||
![]() Component Electronics, Inc | MF55D1200FT52 | KOA Speer Electronics Inc | IN STOCK SHIP TODAY |
| 5,000 | |
| CD15CD120DO3 | Knowles CDE | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 683 | ||
MMBD1204![]() | Fairchild Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant |
| 589 | ||
2SD1207![]() | SANYO Semiconductor Co Ltd | IN STOCK SHIP TODAY |
| 570 | ||
| KD1206PFB2 | SUNON USA | IN STOCK SHIP TODAY |
| 179 | ||
| RK73H1JTTD1200F | KOA Speer Electronics Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 150 | ||
| IRFD120 | INTENATIONAL | IN STOCK SHIP TODAY | 78 | |||
L4931ABD120TR![]() | STMicroelectronics | IN STOCK SHIP TODAY RoHS : Compliant |
| 69 | ||
| 3VH49/9JND12(083) | IN STOCK SHIP TODAY | 18 | ||||
| MTSW-150-06-G-D-120 | Samtec Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 13 | ||
| MH023FAD12.00 | MtronPTI | IN STOCK SHIP TODAY | 12 | |||
| JAD-1201000E | AHEAD | IN STOCK SHIP TODAY |
| 11 | ||
| KD1208PTB3 13.(2).GN | SUNON USA | IN STOCK SHIP TODAY |
| 7 | ||
IRFD120![]() | International Rectifier | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 5 | ||
| D15D1205 | ACON Inc | IN STOCK SHIP TODAY | 2 | |||
![]() FDH Electronics | M123A16BPD120KC | Arrow Electronics | Other Products | 4 | ||
| 2CPZ-LED120 | Honeywell Sensing and Control | Switches |
| 0 | ||
| 550T006M1F0D1-20 | Glenair Inc | Connector RoHS : Compliant |
| 0 | ||
| 550T006M2F0D1-20 | Glenair Inc | Connector RoHS : Compliant |
| 0 | ||
| 550T006NF1F0D1-20 | Glenair Inc | Connector RoHS : Not Compliant |
| 0 | ||
![]() Flip Electronics | MMBD1201 | onsemi | Stock, Ship Today RoHS : Compliant |
| 39,000 | |
| MMBD1203 | onsemi | Stock, Ship Today RoHS : Compliant |
| 32,580 | ||
| FDD120AN15A0 | onsemi | Stock RoHS : Compliant | 10,000 | |||
| SIDC81D120H8X1SA2 | Infineon Technologies AG | Stock RoHS : Compliant | 1,300 | |||
| PD1201 | Littelfuse Inc | Stock RoHS : Compliant | 975 | |||
| MMBD1204 | onsemi | Stock, Ship Today RoHS : Compliant |
| 105 | ||
![]() Maritex | MMBD1204 | onsemi | Rectifier Diodes & Bridges; MMBD1204; ON SEMICONDUCTOR; 3; 200 mA; 100 V; 50 nA RoHS : Compliant |
| 146,566 | |
| MMBD1203 | onsemi | Rectifier Diodes & Bridges; MMBD1203; ON SEMICONDUCTOR; 3; 200 mA; 100 V; 50 nA RoHS : Compliant |
| 21,177 | ||
| TACTD120H43B260-JL | Jialong | Tact Switch; SMD; dimensions 12.0x12.0; h=4.3mm; vertical; operating force 260gf; button: round |
| 2,189 | ||
| CLED1202 | LEDCONN | LED connectors; Number of contacts: 2; cable: 22-26 AWG; load capacity 2A; voltage 250V |
| 2,000 | ||
| CLED1203 | LEDCONN | LED connectors; Number of contacts: 3; cable: 22-26 AWG; load capacity 2A; voltage 250V |
| 2,000 | ||
| TACTD120H43B180-CT | CONNTHERM | Tact Switch; SMD; dimensions 12.0x12.0; h=4.3mm; vertical; operating force 180gf; button: round |
| 1,515 | ||
| TACTD120H85B260-JL | Jialong | Tact Switch; SMD; dimensions 12.0x12.0; h=8.5mm; vertical; operating force 260gf; button: round |
| 971 | ||
| FDD120AN15A0-VB | VBsemi Electronics Co Ltd | MOSFETs; FDD120AN15A0-VB; VBSEMI |
| 180 | ||
| CLED1201 | LEDCONN | LED connectors; Number of contacts: 1; cable: 22-26 AWG; load capacity 2A; voltage 250V |
| 94 | ||
| D12025V24H-K | Activa Inc | Fan; DC; 24VDC; 120x120x25mm; 2.42m3/min; 36.0dB. |
| 30 | ||
| NLDD-1200HW | Mean Well | Converter DC/DC; LED; 55.2W; 6-46VDC; 10-56VDC; 1200mA RoHS : Compliant |
| 30 | ||
| LAD-120C | Mean Well | Buffer Power Supply; module; 120.35W; 41.5V; 1.9A; 41.5V; 1A; 90-264VAC; 127-370VDC |
| 23 | ||
| D12038V24SLB-K | Activa Inc | Fan; DC; 24VDC; 120x120x38mm; 5.05m3/min; 54.0dB. |
| 19 | ||
| D12038V24SSSHBD(A)-TK | Activa Inc | Fan; DC; 24VDC; 120x120x3mm; 11000RPM. |
| 1 | ||
| LAD-120D | Mean Well | Buffer Power Supply; module; 121.99W; 55.2V; 1.21A; 55.2V; 1A; 90-264VAC; 127-370VDC |
| 1 | ||
![]() Neutron USA | ACZ11BR1E-15KQD1-20C | CUI Inc | Encoders 11 mm, 20 PPR, M7 x 0.75 mm Bushing, 15 mm Shaft Length, KQ Shaft Type with Push Switch, Vertical, Through Hole, PCB Pins, Mechanical Panel Mount Encoder |
| 50 | |
| 9AD1201L40021 | Sanyo-Denki Co Ltd | EC Fans AC, DC Axial Fan, 120x120x25mm, 100-240VAC, 22Pa, Ribless, High Static Pressure |
| 50 | ||
| F1892HD1200 | Crydom Inc | Discrete Semiconductor Modules 1.2KV VRRM90A I(T) THY MODULE SCR RoHS : Compliant |
| 50 | ||
| 9AD1201H4002 | Sanyo-Denki Co Ltd | EC Fans AC, DC Axial Fan, 120x120x25mm, 100-240VAC, 62Pa, Rib, High Static Pressure/Flow RoHS : Compliant |
| 25 | ||
| 9AD1201H12 | Sanyo-Denki Co Ltd | AC Fans AC/DC Fan 120x38mm 100-240V Low Power RoHS : Compliant |
| 20 | ||
| LAD-120C | Mean Well | Power Supply, AC-DC, Fire Alarm, 120W, 41.5Vout, Enclosed, LAD-120 Series |
| 20 | ||
| DSOX1204G/D1200BW2A-200 | Keysight Technologies | Benchtop Oscilloscopes InfiniiVision 1000 X-Series Oscilloscope with WaveGen, 4Ch, 70 MHz, upgradeable to 200 MHz |
| 3 | ||
| MS-POE-PD1205 | VIVOTEK | PoE Splitter, 12W, 5V, 802.3af Compliant |
| 2 | ||
| LDD-1200HW | Mean Well | DC-DC Step-down Converter LED Driver CC 55.2W, 9-52V In, 2-46V 1.2A, Wire Styl, EMI Filter, PWM/Remote ON-OFF Control RoHS : Compliant |
| 0 | ||
| JD120A-AO | AddOn Networks | AddOn HP JD120A Compatible 100Base-LX SFP Transceiver (SMF, 1310nm, 15km, LC) |
| 0 | ||
| JD120B-AX | Axiom Manufacturing | Axiom 100BASE-LX SFP for HP |
| 0 | ||
| HAD12-0.4-A+G | SL Power Electronics | Linear Power Supplies +12V@0.4A -12V@0.4A RoHS : Compliant |
| 0 | ||
| LSIC2SD120N40PA | Littelfuse Inc | SiC Schottky Diodes 1200V/40A SIC SBD IN SOT-227 RoHS : Compliant |
| 0 | ||
| DB02D1205A | Delta Electronics Inc | Isolated DC/DC Converters +/-5Vout 2W, 9 ~ 18Vin RoHS : Compliant |
| 0 | ||
| RBD-12-0.35 | RECOM Power GmbH | LED Power Supplies 8-36VIN 2-40VOUT LED DRIVER DC/DC RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3C8741/RD-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-RD, RF Cable Type: Belden 4694R-RD, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4694R-RD Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-RD coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 12G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8741/RD-120, can also be known as a 12G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8741/RD-120 is built with belden 4694R-RD which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 12G SDI cable 120 inch length using 75 Ohm 4694R-RD coax. |
| 190 | |
| PE99W000/RD-120 | Pasternack Enterprises |
| 95 | |||
| PE99W001/RD-120 | Pasternack Enterprises | 95 | ||||
| PE99W005/RD-120 | Pasternack Enterprises | 95 | ||||
| PE3C8746/RD-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4694R-RD, RF Cable Type: Belden 4694R-RD, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4694R-RD Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-RD coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8746/RD-120, can also be known as a 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8746/RD-120 is built with belden 4694R-RD which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4694R-RD coax. |
| 90 | ||
| PE3C8748/RD-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-RD, RF Cable Type: Belden 4855R-RD, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4855R-RD Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4855R-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4855R-RD coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8748/RD-120, can also be known as a 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8748/RD-120 is built with belden 4855R-RD which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. PE3C8748/RD-120 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 12G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4855R-RD coax. |
| 89 | ||
| PE3C8874/RD-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-RD, RF Cable Type: Belden 1855A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1855A-RD Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1855A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1855A-RD coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/RD-120, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/RD-120 is built with Belden 1855A-RD which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/RD-120 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1855A-RD coax. |
| 89 | ||
| PE3C8815/RD-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8815/RD-120, can also be known as a 6G SDI BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to 1.0/2.3 plug cable assembly PE3C8815/RD-120 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8815/RD-120 can also be used in the other direction and will be 1.0/2.3 male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax. |
| 52 | ||
| PE3C8875/RD-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-RD, RF Cable Type: Belden 1855A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1855A-RD Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-RD coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/RD-120, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/RD-120 is built with Belden 1855A-RD which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-RD coax. |
| 51 | ||
| PE3C8749/RD-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-RD, RF Cable Type: Belden 4855R-RD, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4855R-RD Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4855R-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4855R-RD coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 12G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8749/RD-120, can also be known as a 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8749/RD-120 is built with belden 4855R-RD which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 12G SDI cable 120 inch length using 75 Ohm 4855R-RD coax. |
| 51 | ||
| PE3C8747/RD-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 4855R-RD, RF Cable Type: Belden 4855R-RD, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 12G SDI Cable 120 Inch Length Using 75 Ohm 4855R-RD Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4855R-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4855R-RD coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 12G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 12G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8747/RD-120, can also be known as a 12G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K/8K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8747/RD-120 is built with belden 4855R-RD which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 12 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 12 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2082-1, including backwards compatibility with 2081-1. 12G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 12G SDI cable 120 inch length using 75 Ohm 4855R-RD coax. |
| 44 | ||
| PE3C8816/RD-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI HD-BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to HD-BNC cable is a male to male coax assembly, PE3C8816/RD-120, can also be known as a 6G SDI HD-BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to HD-BNC plug cable assembly PE3C8816/RD-120 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI HD-BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax. |
| 0 | ||
| PE99W006/RD-120 | Pasternack Enterprises | 0 | ||||
| PE3C8814/RD-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: HD-BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm HD-BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to HD-BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and HD-BNC cable connection on the other. Our 6G SDI BNC to HD-BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to HD-BNC cable is a male to male coax assembly, PE3C8814/RD-120, can also be known as a 6G SDI BNC plug to HD-BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to HD-BNC plug cable assembly PE3C8814/RD-120 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to HD-BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to HD-BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8814/RD-120 can also be used in the other direction and will be HD-BNC male to BNC male cable assembly if the opposite connectivity is required. 6G SDI BNC plug to HD-BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to HD-BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm HD-BNC male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax. |
| 0 | ||
| PE3C8817/RD-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1694A-RD, RF Cable Type: Belden 1694A-RD, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1694A-RD Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8817/RD-120, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8817/RD-120 is built with Belden 1694A-RD which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8817/RD-120 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1694A-RD coax. |
| 0 | ||
![]() TE Connectivity | SGD-120-3 | TE Connectivity | STRING POT, 120 INCH RANGE Position Sensor Product Type: SG Series String Pots Full Stroke Range: 3048 mm Full Stroke Range: 120 in Output Signal Details: 4 – 20 mA 0 – 10 VDC Accuracy: ±.35 % de la valeur finale SG Series String Pots 3048 mm 120" 4 – 20 mA | 4 – 20Ma Compact Mid-Range String Pot | Sgd Series | Part Number: SGD-120-3 | Internal Number: SGD-120-3 | TE Connectivity RoHS : Compliant |
| 17 | |
![]() Waytek, Inc. | AT06-2S-LED1201 | Amphenol Sine Systems | LED 2 Pin Connector Plug AT 12V Clear End Cap DT06-2S LED NEED PN 38370 |
| 116 | |
![]() Wuhan P&S | SIDC42D120H8 | Infineon Technologies AG | 1200V,75A,Fast Switching Diode RoHS : Compliant |
| 3,789 |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |