C73Y-R Price, дистрибьютор, Stock

C73Y-R дистрибьютор

дистрибьютор

номер детали

производитель

подробное описание детали

Price

Qty.
BuyNow

Rutronik

C731U222MYWDBA7317

KEMET Corporation

KF 2,2nF X1-440 Y2-250Vac RM10,0
RoHS : Compliant

1,000 : $0.298
2,000 : $0.2953
3,000 : $0.2953
5,000 : $0.2926
7,000 : $0.2926

6,000

Chip-Germany GmbH

MMC7.3223M50K31

Evox Rifa / KEMET

Flip Electronics

LC73854M-TLM-E

onsemi

Stock, Ship Today

1 : $1.27

7,000

MC74HC73ADR2G

onsemi

Stock, Ship Today
RoHS : Compliant

1 : $0.07

5,000

NLV74HC73ADR2G

onsemi

Stock
RoHS : Compliant

2,510

Maritex

RC05C7321DT 0,

Fenghua (HK) Electronics Ltd

Chip Resistor; SMD; 0805; 7K32; 0.5%; 1/10W

5,000 : $0.055
1,000 : $0.077
1 : $0.193

10,000

DAC7311IDCKR

Texas Instruments

Digital-to-Analog Converters (DAC); DAC7311IDCKR; TEXAS INSTRUMENTS; 6; 2 mm; 1.25 mm; 1.1 mm
RoHS : Compliant

1,000 : $1.225
500 : $1.285
100 : $1.436
30 : $1.771
10 : $2.029
1 : $2.468

9,195

SJK-6C-7.3728-16-30-60-F-B-30-H

SJK

Quartz crystal; 7.3728MHz; HC49SMD; 30ppm; 16pF

10,000 : $0.237
5,000 : $0.296
1,000 : $0.385
1 : $0.897

2,000

SJK-6C-7.3728-30-30-60-F-C-50-H

SJK

Quartz crystal; 7.3728MHz; HC49SMD; 30ppm; 30pF

1,000 : $0.125
500 : $0.135
100 : $0.138
25 : $0.169
1 : $0.276

615

Pasternack Enterprises US

PE3C7318

Pasternack Enterprises

PE3C7331-60

Pasternack Enterprises

Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. Snap-On BMA Jack to TNC Male Cable 60 Inch Length Using LMR-100 Coax., Pasternack’s PE3C7331-60 BMA jack to TNC male RF cable assembly using LMR-100A coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BMA jack to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BMA cable connection on one end and a TNC cable connection on the other. Our BMA to TNC cable assembly has a jack gender on end 1 and a male on end 2. PE3C7331-60 can also be known as a BMA female to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PE dielectric type. BMA to TNC cable from Pasternack is ideal for applications including bma cable rf backplanes, blind mate bma test, rack and panel, phased array interconnects and high speed switching networks. This cable assembly employs durable and flexible materials, and with a 1-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C7331-60 RF cable has a pvc jacket of 0.110-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 66% and a minimum RF shielding of 90 dB. Our BMA jack to TNC male cable has a maximum VSWR of 1.4:1. This PE3C7331-60 BMA female to TNC plug cable assembly is built with LMR-100A, which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C7331-60 can also be used in the other direction and will be a TNC male to BMA jack cable assembly if the opposite connectivity is required. This BMA female to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to TNC RF cable assembly as per your requirements.LMR® is a registered trademark of Times Microwave Systems.

1 : $189.99
25 : $180.49
50 : $170.99
100 : $163.39

PE3C7345/HS

Pasternack Enterprises

PE3C7363

Pasternack Enterprises

PE3C7380-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Slide-On BMA Plug Bulkhead to TNC Male Cable 6 Inch Length Using RG316 Coax., Pasternack’s PE3C7380-6 BMA plug bulkhead to TNC male RF cable assembly using RG316 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BMA plug to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BMA bulkhead cable connection on one end and a TNC cable connection on the other. Our BMA to TNC cable assembly has a plug gender on end 1 and a male on end 2. PE3C7380-6 can also be known as a BMA male to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. BMA to TNC cable from Pasternack is ideal for applications including bma cable rf backplanes, blind mate bma test, rack and panel, phased array interconnects and high speed switching networks. Our PE3C7380-6 RF cable has an FEP jacket of 0.098-inch diameter. The flexible RF cable has a between series connection. Our bulkhead BMA plug to TNC male cable has a maximum VSWR of 1.4:1. This PE3C7380-6 BMA male to TNC plug cable assembly is built with RG316, which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C7380-6 can also be used in the other direction and will be a TNC male to BMA plug bulkhead cable assembly if the opposite connectivity is required. This BMA male bulkhead to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to TNC RF cable assembly as per your requirements.

1 : $135.99
25 : $129.19
50 : $122.39
100 : $116.95

PE3C7317

Pasternack Enterprises

PE3C7326/HS

Pasternack Enterprises

PE3C7339LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: MMCX, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm.

PE3C7362

Pasternack Enterprises

PE3C7399

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG196A/U, RF Cable Type: RG196, RF Cable Impedance: 50 Ohm.

PE3C7302-60

Pasternack Enterprises

1 : $103.99
25 : $98.79
50 : $93.59
100 : $89.43

PE3C7304LF-48

Pasternack Enterprises

1 : $83.99
25 : $79.79
50 : $75.59
100 : $72.23

PE3C7316/HS

Pasternack Enterprises

PE3C7325

Pasternack Enterprises

PE3C7333-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: BMA, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Passivated Stainless Steel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm. Snap-On BMA Jack to TNC Male Cable 6 Inch Length Using RG316 Coax., Pasternack’s PE3C7333-6 BMA jack to TNC male RF cable assembly using RG316 coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BMA jack to TNC male cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BMA to TNC cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BMA cable connection on one end and a TNC cable connection on the other. Our BMA to TNC cable assembly has a jack gender on end 1 and a male on end 2. PE3C7333-6 can also be known as a BMA female to TNC plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. BMA to TNC cable from Pasternack is ideal for applications including bma cable rf backplanes, blind mate bma test, rack and panel, phased array interconnects and high speed switching networks. Our PE3C7333-6 RF cable has an FEP jacket of 0.098-inch diameter. The flexible RF cable has a between series connection. Our BMA jack to TNC male cable has a maximum VSWR of 1.4:1. This PE3C7333-6 BMA female to TNC plug cable assembly is built with RG316, which is a flexible coax type. The Pasternack flexible BMA cable assembly is manufactured with BMA to TNC cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a crimp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C7333-6 can also be used in the other direction and will be a TNC male to BMA jack cable assembly if the opposite connectivity is required. This BMA female to TNC plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BMA to TNC cable assembly for quick shipment worldwide. Variations of BMA and TNC cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BMA to TNC RF cable assembly as per your requirements.

1 : $173.99
25 : $165.29
50 : $156.59
100 : $149.63