C35-AF5-R Price, дистрибьютор, Stock

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Plug, Connector 2 Polarity: Reverse Polarity, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Male to Reverse Polarity TNC Plug Low Loss Cable 12 Inch Length Using LMR-240 Coax with HeatShrink, LF Solder., Radio frequency assembly N male to reverse polarity TNC plug low loss cable 12 inch length using LMR-240 coax with heatshrink, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to reverse polarity TNC plug low loss cable 12 inch length using LMR-240 coax with heatshrink, LF solder, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and reverse polarity TNC cable connection on the other. Our low loss type N to reverse polarity TNC cable assemblies have a male gender on end 1 and plug on end 2. PE3C3547LF/HS-12 can also be known as a low loss type N plug to reverse polarity TNC male cable assembly and will be shipped same-day as it is purchased. Type N plug to reverse polarity TNC male cable assembly PE3C3547LF/HS-12 is built with LMR-240 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to reverse polarity TNC plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3547LF/HS-12 can also be used in the other direction and will be reverse polarity TNC plug to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC reverse polarity male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to reverse polarity TNC plug low loss cable 12 inch length using LMR-240 coax with heatshrink, LF solder.

1 : $98.49
25 : $93.57
50 : $88.64
100 : $84.7

1,570

PE3C3510LF-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG188-DS, RF Cable Type: RG188-DS, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Male to BNC Male Cable 12 Inch Length Using RG188-DS Coax, LF Solder., Radio frequency assembly SMA male to BNC male cable 12 inch length using RG188-DS coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male to BNC male cable 12 inch length using RG188-DS coax, LF solder, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and BNC cable connection on the other. Our SMA to BNC cable assemblies have a male gender on end 1 and male on end 2. PE3C3510LF-12 can also be known as a SMA plug to BNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to BNC plug cable assembly PE3C3510LF-12 is built with RG188-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency SMA male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C3510LF-12 can also be used in the other direction and will be BNC male to SMA male cable assembly if the opposite connectivity is required. SMA plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to BNC male cable 12 inch length using RG188-DS coax, LF solder.

1 : $54.59
25 : $51.86
50 : $49.13
100 : $46.95

591

PE3C3513-24

Pasternack Enterprises

1 : $73.89
25 : $70.2
50 : $66.5
100 : $63.55

425

PE3C3571-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMA Male Right Angle to SMA Male Right Angle Cable 24 Inch Length Using PE-SR402FLJ Coax., Radio frequency assembly SMA male right angle to SMA male right angle cable 24 inch length using PE-SR402FLJ coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA male right angle to SMA male right angle cable 24 inch length using PE-SR402FLJ coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and right angle SMA cable connection on the other. Our right angle SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. PE3C3571-24 can also be known as a right angle SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C3571-24 is built with PE-SR402FLJ which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with right angle SMA to right angle SMA cable connectors, has a 50 Ohm impedance. RF specs on this 12.4 GHz maximum frequency SMA right angle male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA right angle plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA male right angle cable 24 inch length using PE-SR402FLJ coax.

1 : $181.99
25 : $172.89
50 : $163.79
100 : $156.51

PE3C3511LF-48

Pasternack Enterprises

1 : $87.79
25 : $83.4
50 : $79.01
100 : $75.5

PE3C3512/HS

Pasternack Enterprises

PE3C3514-72

Pasternack Enterprises

1 : $97.39
25 : $92.52
50 : $87.65
100 : $83.76

PE3C3529

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. SMA Female Bulkhead to BNC Male Cable Using RG316-DS Coax., Radio frequency assembly SMA female bulkhead to BNC male cable using RG316-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to BNC male cable using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and BNC cable connection on the other. Our SMA to BNC cable assembly has female gender on end 1 and male on end 2. PE3C3529 can also be known as a SMA jack to BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA jack to BNC plug cable assembly PE3C3529 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has crimp/crimp attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3C3529 RF cable are available on our downloadable PDF datasheet.PE3C3529 can also be used in the other direction and will be BNC male to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

PE3C3574

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 2 Hole Flange, Connector Impedance 1: 50, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50, RF Cable Part Number: RG405/U, RF Cable Type: RG405, RF Cable Impedance: 50. Push-On SMP Male 2 Hole Flange to SMP Female Cable Using RG405 Coax. PE3C3574 is a SMP male 2 hole flange to SMP female cable using RG405 coax. This Pasternack SMP male 2 hole flange to SMP female cable assembly uses a 50 Ohm SMP for connector 1 and a 50 Ohm SMP for connector 2. Our male SMP 2 hole flange to female SMP cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3C3574 SMP male 2 hole flange to SMP female cable assembly is constructed with RG405 coax.

PE3C3584/PH180-60

Pasternack Enterprises

Key Specifications, Connector Series 1: SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMP, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length: 60 inches. Push-On SMP Female Right Angle to Push-On SMP Female Right Angle Cable 60 Inch Length Using RG316 Coax with 180 Deg. Clock., Radio frequency assembly push-on SMP female right angle to push-on SMP female right angle cable 60 inch length using RG316 coax with 180 deg. clock from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Push-on SMP female right angle to push-on SMP female right angle cable 60 inch length using RG316 coax with 180 deg. clock, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMP to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMP cable connection on one end and right angle SMP cable connection on the other. Our right angle SMP to right angle SMP cable assemblies have a female gender on end 1 and female on end 2. This SMP to SMP cable is a female to female coax assembly, PE3C3584/PH180-60, can also be known as a right angle SMP jack to right angle SMP jack cable assembly and will be shipped same-day as it is purchased. SMP jack to SMP jack cable assembly PE3C3584/PH180-60 is built with RG316 which is a flexible coax type. The Pasternack flexible SMP cable assembly is manufactured with right angle SMP to right angle SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency SMP right angle female to SMP right angle female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMP right angle jack to SMP right angle jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMP to SMP cable assembly for quick shipment worldwide. Variations of SMP cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this push-on SMP female right angle to push-on SMP female right angle cable 60 inch length using RG316 coax with 180 deg. clock.

1 : $78.19
25 : $74.28
50 : $70.37
100 : $67.24

PE3C3508-48

Pasternack Enterprises

1 : $115.99
25 : $110.19
50 : $104.39
100 : $99.75

PE3C3527LF

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. BNC Male to TNC Male Cable Using RG316-DS Coax, LF Solder. PE3C3527LF is a BNC male to TNC male cable using RG316-DS coax. This Pasternack BNC male to TNC male cable assembly uses a 50 Ohm BNC for connector 1 and a 50 Ohm TNC for connector 2. Our male BNC to male TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3527LF BNC male to TNC male cable assembly is constructed with RG316-DS coax.

PE3C3527LF/HS

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm. TNC Male to BNC Male Cable Using RG316-DS Coax with HeatShrink, LF Solder. PE3C3527LF/HS is a TNC male to BNC male cable using RG316-DS coax. This Pasternack TNC male to BNC male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm BNC for connector 2. Our male TNC to male BNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C3527LF/HS TNC male to BNC male cable assembly is constructed with RG316-DS coax.

PE3C3529-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. SMA Female Bulkhead to BNC Male Cable 36 Inch Length Using RG316-DS Coax., Radio frequency assembly SMA female bulkhead to BNC male cable 36 inch length using RG316-DS coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female bulkhead to BNC male cable 36 inch length using RG316-DS coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and BNC cable connection on the other. Our SMA to BNC cable assembly has female gender on end 1 and male on end 2. PE3C3529-36 can also be known as a SMA jack to BNC plug cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMA jack to BNC plug cable assembly PE3C3529-36 is built with RG316-DS which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to BNC cable connectors, has a 50 Ohm impedance and is double shielded. One connector features the crimp/solder attachment method and a brass body with nickel plating, while the other has crimp/crimp attachment method and brass body with nickel plating.Additional dimensions, specifications and CAD drawings for this PE3C3529-36 RF cable are available on our downloadable PDF datasheet.PE3C3529-36 can also be used in the other direction and will be BNC male to SMA female bulkhead cable assembly if the opposite connectivity is required. SMA jack bulkhead to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to BNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMA RF cable assembly as per your requirements.

1 : $97.39
25 : $92.52
50 : $87.65
100 : $83.76

PE3C3529LF-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316-DS, RF Cable Type: RG316-DS, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. BNC Male to SMA Female Bulkhead Cable 36 Inch Length Using RG316-DS Coax, LF Solder., Radio frequency assembly BNC male to SMA female bulkhead cable 36 inch length using RG316-DS coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The BNC male to SMA female bulkhead cable 36 inch length using RG316-DS coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom BNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a BNC cable connection on one end and a SMA bulkhead cable connection on the other. Our BNC to SMA cable assembly has a male gender on end 1 and a female on end 2. PE3C3529LF-36 can also be known as a BNC plug to SMA jack cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 1.57-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C3529LF-36 RF cable has a FEP jacket of 0.114-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 165 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 85 dB. Our BNC male to bulkhead SMA female cable has a maximum VSWR of 1.5:1. BNC plug to SMA jack cable assembly PE3C3529LF-36 is built with RG316-DS which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to SMA cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the crimp/crimp attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C3529LF-36 can also be used in the other direction and will be a SMA female bulkhead to BNC male cable assembly if the opposite connectivity is required. BNC plug to SMA jack bulkhead cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality BNC to SMA cable assembly for quick shipment worldwide. Variations of BNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal BNC to SMA RF cable assembly as per your requirements.

1 : $70.69
25 : $67.16
50 : $63.62
100 : $60.79

Venkel Ltd.

MELFC0102-UC-3572DT

VENKEL LTD

MELF Coated Thin Film CR;0102;1/5W;�50PPM;35.7K;�0.5%
RoHS : Compliant

HPTF0805-TC-3571CT

VENKEL LTD

High Power Thin Film CR;0805;1/4W;�50PPM;3.57K;�0.25%
RoHS : Compliant

MEHF0102-UC-35R7FT

VENKEL LTD

High Frequency MELF;0102;1/5W;�50PPM;35.7R�1%
RoHS : Not Compliant

MELFC0204-TC-3571BT

VENKEL LTD

MELF Coated Thin Film CR;0204;1/4W;�50PPM;3.57K;�0.1%
RoHS : Compliant

MELFC0207-VC-3572BT

VENKEL LTD

MELF Coated Thin Film CR;0207;1/2W;�50PPM;35.7K;�0.1%
RoHS : Compliant

MELFC0207-XC-3570BT

VENKEL LTD

MELF Coated Thin Film CR;0207;1W;�50PPM;357R;�0.1%
RoHS : Compliant

MELFM0207-XC-3572FT

VENKEL LTD

MELF Molded Thin Film CR;0207;1W;�50PPM;35.7K;�1%
RoHS : Not Compliant

MELFM0207-XC-35R7DT

VENKEL LTD

MELF Molded Thin Film CR;0207;1W;�50PPM;35.7R;�0.5%
RoHS : Not Compliant

TFCR0201-32W-C-3570CT

VENKEL LTD

Thin Film CR;0201;1/32W;�50PPM;357R;�0.25%
RoHS : Compliant

TFCR0603-10W-C-3521BT-1K

VENKEL LTD

Thin Film CR;0603;1/10W;�50PPM;3.52K;�0.1%
RoHS : Compliant

TFCR0603-10W-C-3523CT

VENKEL LTD

Thin Film CR;0603;1/10W;�50PPM;352K ;�0.25%
RoHS : Compliant

TFCR0603-10W-C-3570DT-1K

VENKEL LTD

Thin Film CR;0603;1/10W;�50PPM;357R;�0.5%
RoHS : Compliant

TFCR0603-16W-C-3523BT-1K

VENKEL LTD

Thin Film CR;0603;1/16W;�50PPM;352K ;�0.1%
RoHS : Compliant

TFCR0603-16W-C-3571DT

VENKEL LTD

Thin Film CR;0603;1/16W;�50PPM;3.57K;�0.5%
RoHS : Compliant

TFCR0603-16W-C-3572DT-1K

VENKEL LTD

Thin Film CR;0603;1/16W;�50PPM;35.7K;�0.5%
RoHS : Compliant

Vyrian

SN74HC352N-10

Texas Instruments

Multiplexer, HC/UH Series, 2-Func, 4 Line Input, 1 Line Output, Inverted Output, CMOS, PDIP16

7,956

MT5C6406EC-35LAT

Micron Technology Inc

Standard SRAM, 16KX4, 35ns, CMOS, CQCC28
RoHS : Not Compliant

7,190

MT5C2561C-35

Micron Technology Inc

Standard SRAM, 256KX1, 35ns, CMOS, CDIP24
RoHS : Not Compliant

7,119

MT52C9042C35

Micron Technology Inc

RoHS : Not Compliant

7,080

MT5C2568EC35P/883C

Micron Technology Inc

Standard SRAM, 32KX8, 35ns, CMOS, CQCC28
RoHS : Not Compliant

6,706

MT5C6406EC-35AT

Micron Technology Inc

Standard SRAM, 16KX4, 35ns, CMOS, CQCC28
RoHS : Not Compliant

6,312

MT5C6407C-35AT

Micron Technology Inc

Standard SRAM, 16KX4, 35ns, CMOS, CDIP28
RoHS : Not Compliant

6,011

MT5C1604C-35AT

Micron Technology Inc

Standard SRAM, 4KX4, 35ns, CMOS, CDIP20
RoHS : Not Compliant

4,756

MT5C6407EC-35LXT

Micron Technology Inc

Standard SRAM, 16KX4, 35ns, CMOS, CQCC28
RoHS : Not Compliant

4,725

MT52C9005EC35

Micron Technology Inc

RoHS : Not Compliant

4,247

MT5C6407EC-35XT

Micron Technology Inc

Standard SRAM, 16KX4, 35ns, CMOS, CQCC28
RoHS : Not Compliant

4,074

MT5C1608EC-35L883C

Micron Technology Inc

Standard SRAM, 2KX8, 35ns, CMOS, CQCC28
RoHS : Not Compliant

3,868

SN54HC352J

Texas Instruments

Multiplexer, 2-Func, 4 Line Input, CMOS, CDIP16
RoHS : Not Compliant

3,546

MT5C2564C-35LIT

Micron Technology Inc

Standard SRAM, 64KX4, 35ns, CMOS, CDIP24
RoHS : Not Compliant

2,700

MT5C2561C35/883C

Micron Technology Inc

Standard SRAM, 256KX1, 35ns, CMOS, CDIP24
RoHS : Not Compliant

2,566

Waytek, Inc.

BK/ATC-35

Eaton Electronics

35 Amp Blue Green ATC Fuse

100 : $0.3886
200 : $0.3571
500 : $0.3217
1,000 : $0.2915
5,000 : $0.281

1,308

Wuhan P&S

GBPC3510W

onsemi

Single-Phase Bridge Rectifier
RoHS : Compliant

1 : $7.2
100 : $4.6
500 : $3.79
1,000 : $3.49

200

C35-AF5-R дистрибьютор

ссылки URL