A6311MI3JB-T Price, дистрибьютор, Stock

PEM� self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly

1 : $0.0784
100 : $0.0723
500 : $0.0635
1,000 : $0.0602
5,000 : $0.0584

48,091

FHA-632-10

PennEngineering (PEM)

1 : $0.1366
100 : $0.1229
500 : $0.1093
1,000 : $0.099
5,000 : $0.099

4530A-632-SS-20

RAF Electronic Hardware

CHA-632-4

PennEngineering (PEM)

These studs ensure permanent mounting in metal sheets as thin as .062 in.The fastener head is locked securely in a blind milled hole and is able to handle substantial loads. The concealed-head feature allows the side of the sheet opposite installation to

IUA-632-1

Standard Insert

Designed for use in tapered holes.Tapered mounting hole allows for rapid and accurate alignment prior to installation.Aluminum inserts ideal for light weight designs.Aluminum and stainless steel inserts offer lead-free alternative.

10,000 : $0.0957

SOA-632-6

PennEngineering (PEM)

These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.PEM� brand thru-hole threaded standoffs are installed with their heads flush with one surf

7455-A-632-S

RAF Electronic Hardware

TSOA-632-437

PennEngineering (PEM)

These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Types TSO TSOS and TSOA self-clinching threaded standoffs provide permanent threads in s

SOA-63.1-10

PennEngineering (PEM)

These standoffs which use the proven self-clinching design install with a squeeze in properly sized round holes - and become permanently mounted in the thin sheet.Unthreaded standoffs are also available for spacing multi-panel assemblies.

3049-A-632-SS

RAF Electronic Hardware

PFLA-632-1

Standard Insert

Press-fit insert with strong reusable threads. No heat or ultrasonics required.Flange-head eliminates direct contact of plastic with mating parts.Slotted insert compresses allowing easy access into the mounting hole.Aluminum inserts ideal for light weigh

3047-A-632-B-16

RAF Electronic Hardware

ELECTRO TIN RD SWAGE STANDOFF,1/4RD X 1/4 LONG

TSOA-632-187

PennEngineering (PEM)

TSOA-632-312

PennEngineering (PEM)

PKA-632

Standard Insert

Press-fit insert with strong reusable threads. No heat or ultrasonics required.Straight knurling at the top end of the insert offers higher torsional resistance.Slotted insert compresses allowing easy access into the mounting hole.Aluminum inserts ideal

10,000 : $0.1327

EBV Elektronik

A6387DTR

STMicroelectronics

(Alt: A6387DTR)
RoHS : Compliant

MMBTA63LT1G

onsemi

PNP Bipolar Darlington Transistor ONSSPCTRNSTVU6M5P (Alt: MMBTA63LT1G)
RoHS : Compliant

TC74A6-3.3VAT

Microchip Technology Inc

(Alt: TC74A6-3.3VAT)
RoHS : Compliant

STM32WBA63CIU7

STMicroelectronics

(Alt: STM32WBA63CIU7)
RoHS : Compliant

STM32WBA63CGU6

STMicroelectronics

(Alt: STM32WBA63CGU6)
RoHS : Compliant

STM32WBA63CIU6

STMicroelectronics

RF Microcontrollers (Alt: STM32WBA63CIU6)
RoHS : Compliant

TC74A6-3.3VCTTR

Microchip Technology Inc

(Alt: TC74A6-3.3VCTTR)
RoHS : Compliant

STM32WBA63CIU6TR

STMicroelectronics

MICROCONTROLLER STM32 32BIT ARM CORTEX MCUS (Alt: STM32WBA63CIU6TR)
RoHS : Compliant

11-21SURC/S530-A6/3T

Everlight Electronics Co Ltd

(Alt: S10B017554)
RoHS : Compliant

GWCS8PM1.PM-LUMQ-A636-1-350-R18

ams OSRAM Group

(Alt: Q65115A2806)
RoHS : Compliant

GWCSSRM1.BM-MQMS-A636-1-700-R18

ams OSRAM Group

(Alt: Q65113A9537)
RoHS : Compliant

GWJCLPS2.EM-H3H8-A636-1-65-2-R33

ams OSRAM Group

LED Chip Warm White 3500K 150mA 2Pin SMD TR (Alt: Q65112A8482)
RoHS : Compliant

GWJCLPS2.CM-GVH2-A636-1-65-2-R33

ams OSRAM Group

LED DURIS E 3 CCT3500K (Alt: Q65112A8710)
RoHS : Compliant

KWDDLM31.EH-5J6K-A636-W4A4-140-R18

ams OSRAM Group

LED Chip Warm White 3500K 200mA 2Pin SMD TR (Alt: Q65112A5710)
RoHS : Compliant

KW DDLM32.EH-HUJT-A636-K1M2-100-R18

ams OSRAM Group

(Alt: Q65113A5721)
RoHS : Compliant

Flip Electronics

SA630D/01,118

NXP Semiconductors

Stock
RoHS : Compliant

40,000

MMBTA63LT1G

onsemi

Stock, Ship Today
RoHS : Compliant

2,745

LA6393DL-E

onsemi

Stock

800

LA6339L-E

onsemi

Stock

Maritex

TS5A63157DCKR

Texas Instruments

Other Interface ICs; TS5A63157DCKR; TEXAS INSTRUMENTS; 6; 5.5 V; 1.65 V; SOT-70-6
RoHS : Compliant

1,000 : $0.229
500 : $0.25
100 : $0.279
50 : $0.332
10 : $0.393
1 : $0.489

4,328

MMBTA63LT1G

onsemi

Bipolar Transistors (BJT); MMBTA63LT1G; ON SEMICONDUCTOR; PNP; 30 V; 500 mA; 3
RoHS : Compliant

6,000 : $0.04
3,000 : $0.042
1,000 : $0.047
300 : $0.052
100 : $0.071
10 : $0.096
1 : $0.299

1,713

NA6, 3KG, 0.3M WIRE, DP22

MAVIN

Single point load cell; Capacity 3kg (30N); cable 0.3m; Accuracy: C2; Threaded holes: 22mm

50 : $32.222
10 : $34.137
3 : $36.053
1 : $38.001

NA6, 3KG, 0.3M WIRE, IP66, ROHS

MAVIN

Single point load cell; Capacity 3kg (30N); cable: 0.3m; Accuracy: C2

50 : $32.222
10 : $34.137
3 : $36.053
1 : $38.001

Master Electronics

A63971-000

TE Connectivity

Heat Shrink Cable Boots & End Caps 101A031-3-05-0 MOQ Reduction
RoHS : Compliant

1,300 : $3.18
975 : $3.24
650 : $4.61
325 : $8.7

55A6315-16-9-9CS2632

TE Connectivity

55A6315-16-9-9CS2632 MOQ Reduction
RoHS : Compliant

5,000 : $1.27
3,750 : $1.29
2,500 : $1.83
1,250 : $3.46

B07A632BC1-0454

TE Connectivity

B07A632BC1-0454=RELAY MOQ Reduction
RoHS : Not Compliant

10 : $248.2
8 : $253.26
5 : $341.23
3 : $462.09

CA3102E28A63P-B-04

ITT Interconnect Solutions

Circular Connector - Box Mount - Contact Arrangement: 28A63 - Pins - Bayonet Coupling - Endbell w/Clamp & Bushing
RoHS : Not Compliant

100 : $52.25
75 : $53.31
50 : $75.76
25 : $143.11

SCA-6.3A

OptiFuse

6.3x32mm Ceramic - Very Fast 500V 6.3A
RoHS : Compliant

5,000 : $2.55
2,500 : $2.62
1,000 : $2.69
500 : $2.8
250 : $3.42
100 : $3.68
25 : $5.32
5 : $6.34

RN73C2A634RBTG

TE Connectivity

RN 0805 634R 0.1% 10PPM CUT LENGTH
Thin Film Precision SMD
Fixed Resistor
RoHS : Compliant

15,000 : $0.608
10,000 : $0.653
7,500 : $0.655
5,000 : $0.672
2,500 : $0.712
1,000 : $0.783
500 : $0.819
250 : $0.857

RN73C2A63K4BTD

TE Connectivity

RN 0805 63K4 0.1% 10PPM 5KRL
Thin Film Precision SMD
Fixed Resistor MOQ Reduction
RoHS : Compliant

5,000 : $0.2549
3,750 : $0.2601
2,500 : $0.3286
1,250 : $0.534

RN73C2A63R4BTG

TE Connectivity

RN 0805 63R4 0.1% 10PPM CUT LENGTH
Thin Film Precision SMD
Fixed Resistor
RoHS : Compliant

15,000 : $0.608
10,000 : $0.653
7,500 : $0.655
5,000 : $0.672
2,500 : $0.712
1,000 : $0.783
500 : $0.819
250 : $0.857

EKMH101VNN562MA63U

United Chemi-Con Inc

Cap Alum 5600UF 20% 100V Snap
RoHS : Compliant

5,000 : $2.63
2,600 : $2.67
1,000 : $2.8
600 : $2.81
400 : $2.93
200 : $3.28
50 : $3.43
10 : $4.22

DBAS-74-19-7-PN-A6336

TE Connectivity

Circular Connector Receptacle 7 Position Pin Contact Jam Nut Crimp
RoHS : Compliant

5 : $1,371.09
3 : $1,670.08
1 : $1,715.83

GSA63100-02

Carlo Gavazzi Holding AG

Any Trip Alarm 63/100Af 2Nc |Carlo Gavazzi GSA63100-02
RoHS : Compliant

250 : $40.28
100 : $40.48
50 : $40.69
25 : $42.26
10 : $43.21
5 : $45.75
3 : $65.4

LEGBXA6-39952-16-T

Sensata Circuit Breakers

Circuit Breaker Magnetic-Hydraulic 1 Pole LEG Series | Sensata - Airpax LEGBXA6-39952-16-T
RoHS : Compliant

102 : $33.83
51 : $38.73
21 : $64.26
12 : $65.19
6 : $70.37
3 : $95.55

LPTA-6/-3-7-5-ZF

Phoenix Contact

LPTA 6/ 3-7 5-ZF
RoHS : Compliant

5,000 : $4.94
2,500 : $5.0
1,000 : $5.06
500 : $5.2
250 : $5.27
100 : $5.57
50 : $5.91

E82D630VGS123MA63U

United Chemi-Con Inc

RoHS : Compliant

100 : $8.61
75 : $8.78
50 : $9.41
25 : $12.54

DSA6301JA1AB-002.0000VAO

Microchip Technology Inc

MEMS OSC AUTO LVCMOS 2MHz 50PPM 1.8-3.3V -40 to 125C 2
RoHS : Compliant

10,080 : $1.07
7,560 : $1.08
5,040 : $1.09
2,520 : $1.1
1,120 : $1.14
560 : $1.2
280 : $1.21
140 : $1.22

Neutron USA

MA63

Extech by FLIR

Clamp Multimeters & Accessories Clamp Meter TRMS 60A AC/DC W/NCV

1 : $579.99

MA6.3UM

Altech Corporation

Circuit Breakers

1 : $334.99

8910DPA63V02

Square D by Schneider Electric

Definite Purpose Contactor, 3 Pole NO, 60 A, 30HP @ 575V, 3 Phase, 8910DP Series

1 : $684.99

A6-353221

Dwyer Instruments Inc

Pressure switch, set point range 3.1-7 1 psi

1 : $141.66

F204A-63/0.03 110V

ABB Low Voltage Products and Systems

Circuit Breakers F204 63A 30MA 110V PB TEST VOLTAGE

1 : $1,749.99

A63-30-11-84

ABB Low Voltage Products and Systems

Contactor; NEMA; 3 Pole; 65A; 110-120VAC@60Hz; 110VAC@50Hz Coil; DIN Rail/Panel Mount

1 : $1,424.99

ACE-A630B-RS-R10

iEi Integration Corporation

1U flex ATX 300W Power Supply;90~264VAC;ERP;CCL;RoHS

1 : $147.44

Q45UR3BA63CQ, 53010

Banner Engineering Corp

Banner Engineering Q45UR3BA63CQ Discrete, Controller, Range, Depends, Discrete Q45UR Series

1 : $1,074.99

DPA-63-16-A

Festo

Pressure Booster, air, G3/8, 2-10 bar in, 4-16 bar out, w/solenoid piston

1 : $4,489.99

8910DPA63V14

Square D by Schneider Electric

Contactor,DP,3PST-NO,60A,Ctrl-V 24AC,25HP@230VAC,30HP@460/575VAC

1 : $589.99

8910DPA63V02U1

Square D by Schneider Electric

CONTACTOR 600VAC 60AMP DPA +OPTIONS

1 : $744.99

96PSA-A63W15V1-M

Advantech Co Ltd

Adapter, 63W 15VDC 4.2A, AC: C8, DC: P center Str Barrel 2.5x5.5x11mm, In: 100-240VAC with PFC

1 : $124.99

B43548A6337M060

TDK Corporation

Aluminum Electrolytic Capacitors - Snap In 500VDC 330uF 20% 210mOhm PET
RoHS : Compliant

1 : $39.99

DPA-63-10

Festo

Pressure Booster, air, G3/8, 2-8 bar in, 4-10 bar out
RoHS : Compliant

1 : $4,224.99

8910DPA63V09

Square D by Schneider Electric

Contactor, Non-Reversing, 208-240VAC Coil, 60A, 3-Pole, Panel, Type DP

1 : $574.99

Pasternack Enterprises US

PE15A63018

Pasternack Enterprises

1 : $1,210.0
5 : $1,161.6
10 : $1,113.2
25 : $1,064.8

1,388

PE15A63002

Pasternack Enterprises

Key Specifications, Gain: 25 dB, Power Output: 22 dBm P1dB, Frequency, Min: 30 MHz, Frequency, Max: 1.5 GHz, Noise Figure, Max: 2 dB, Design: Input Protected Low Noise, Voltage, DC Max: 15 Volts, Current, DC Max: 180 mA, Connector Series: SMA. 1.6 dB NF Input Protected Low Noise Amplifier, Operating from 30 MHz to 1.5 GHz with 25 dB Gain, 22 dBm P1dB and SMA. PE15A63002 input protected low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized input protected low noise amplifier uses SMA connectors at 50 Ohm. This SMA input protected low noise amplifier has a minimum frequency of 30 MHz and maximum frequency of 1.5 GHz. The significantly low noise figure of this radio frequency amplifier is 2 dB with a typical gain of 25 dB. input protected LNA amplifier PE15A63002 is rated at 15 Volts DC maximum and 180 mA. Our input protected low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave input protected low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.

1 : $1,220.0
5 : $1,171.2
10 : $1,122.4

PE15A63008

Pasternack Enterprises

Key Specifications, Gain: 30 dB, Power Output: 10 dBm P1dB, Frequency, Min: 2.6 GHz, Frequency, Max: 3.1 GHz, Noise Figure, Max: 1.6 dB, Design: Input Protected Low Noise, Connector Series: SMA. 1.2 dB NF Input Protected Low Noise Amplifier, Operating from 2.6 GHz to 3.1 GHz with 30 dB Gain, 10 dBm P1dB and SMA. PE15A63008 input protected low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized input protected low noise amplifier uses SMA connectors at 50 Ohm. This SMA input protected low noise amplifier has a minimum frequency of 2.6 GHz and maximum frequency of 3.1 GHz. The significantly low noise figure of this radio frequency amplifier is 1.6 dB with a typical gain of 30 dB. input protected LNA amplifier PE15A63008 is rated at Volts DC maximum and mA. Our input protected low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave input protected low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.

1 : $684.99
5 : $657.59
10 : $630.19

PE15A63016

Pasternack Enterprises

1 : $1,290.0
5 : $1,238.4
10 : $1,186.8
25 : $1,135.2

PE15A63026

Pasternack Enterprises

Key Specifications, Power Output: 22 dBm Psat, Frequency, Min: 10 MHz, Frequency, Max: 40 GHz, Gain, Min: 26 dB, Gain, Typical: 29 dB, 3rd Intercept Point: 30 dB, Connector Series: 2.92mm. 29 dB Gain, 20 dBm P1dB, 0.01 GHz to 40 GHz, Broadband AC Low Noise Amplifier, Bench-Top, 110/220VAC, 5 dB Noise Figure, 2.92mm. The PE15A63026 low noise broadband amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses 2.92mm connectors at 50 Ohm. This AC powered low noise broadband amplifier has a 2.92mm gender configuration for input and output ports. This 2.92mm broadband amplifier has a minimum frequency of 10 MHz and maximum frequency of 40 GHz. The PE15A63026 broadband amplifier has 1.9:1 of typical VSWR (Voltage Standing Wave Ratio). The typical gain of this radio frequency amplifier is 29 dB. This 2.92mm AC powered low noise broadband amplifier is ideal for test & measurement, 5G communication, wireless infrastructure, military & commercial communications, military electronic systems, research & development, microwave radio, vsat and fiber optics applications. Our broadband AC powered low noise amplifier is designed to operate on a 110/220 VAC voltage. This RF low noise amplifier has a 1.5 dB typical gain flatness along with 26 dB of minimum gain. Additional specs for this in-series low noise broadband amplifier can be found on its PDF specification datasheet and CAD drawings above. The PE15A63026 broadband amplifier operates over the temperature range of -40 deg C and 85 deg C. Our radio frequency in-series AC powered broadband amplifier from Pasternack has an aluminum body with GaAS semiconductor technology for high efficiency. This coax connectorized low noise broadband amplifier has 20 dB of typical 1dB compression point and 5 dBm of typical RF input power. The AC powered broadband amplifier is rated for 22 dBm of typical saturated output power along with typical reverse isolation of -50 dB. Our AC powered broadband radio frequency amplifier is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial low noise broadband amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect broadband AC powered low noise amplifier for your requirement.

1 : $22,800.0
5 : $21,888.0
10 : $20,976.0
25 : $20,064.0

PE15A63025

Pasternack Enterprises

Key Specifications, Power Output: 1 Watt (30 dBm) Psat, Frequency, Min: 10 MHz, Frequency, Max: 30 GHz, Gain, Min: 32 dB, Gain, Typical: 38 dB, Noise Figure, Max: 5.5 dB, 3rd Intercept Point: 35 dB, RF Input VSWR Max: 2:1, RF Output VSWR Max: 2.2:1, Connector Series: 2.92mm. 38 dB Gain, 27 dBm P1dB, 0.01 GHz to 30 GHz, Broadband AC Low Noise Amplifier, Bench-Top, 110/220VAC, 3.7 dB Noise Figure, 2.92mm. The PE15A63025 low noise broadband amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses 2.92mm connectors at 50 Ohm. This AC powered low noise broadband amplifier has a 2.92mm gender configuration for input and output ports. This 2.92mm broadband amplifier has a minimum frequency of 10 MHz and maximum frequency of 30 GHz. The PE15A63025 broadband amplifier has 1.4:1 of typical VSWR (Voltage Standing Wave Ratio). The significantly low noise figure of this radio frequency amplifier is 5.5 dB with a typical gain of 38 dB. This 2.92mm AC powered low noise broadband amplifier is ideal for test & measurement, 5G communication, wireless infrastructure, military & commercial communications, military electronic systems, research & development, microwave radio, vsat and fiber optics applications. Our broadband AC powered low noise amplifier is designed to operate on a 110/220 VAC voltage. This RF low noise amplifier has a 1.5 dB typical gain flatness along with 32 dB of minimum gain. Additional specs for this in-series low noise broadband amplifier can be found on its PDF specification datasheet and CAD drawings above. The PE15A63025 broadband amplifier operates over the temperature range of -40 deg C and 85 deg C. Our radio frequency in-series AC powered broadband amplifier from Pasternack has an aluminum body with GaAS semiconductor technology for high efficiency. This coax connectorized low noise broadband amplifier has 27 dB of typical 1dB compression point and 3.7 dBm of typical RF input power. The AC powered broadband amplifier is rated for 30 dBm of typical saturated output power along with typical reverse isolation of -70 dB. Our AC powered broadband radio frequency amplifier is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial low noise broadband amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect broadband AC powered low noise amplifier for your requirement.

1 : $19,800.0
5 : $19,008.0
10 : $18,216.0
25 : $17,424.0

PE15A63022

Pasternack Enterprises

Key Specifications, Power Output: 23 dBm Psat, Frequency, Min: 10 MHz, Frequency, Max: 3 GHz, Gain, Min: 33 dB, Gain, Typical: 36 dB, Noise Figure, Max: 2.5 dB, 3rd Intercept Point: 36 dB, Connector Series: SMA. 36 dB Gain, 21 dBm P1dB, 0.01 GHz to 3 GHz, Broadband AC Low Noise Amplifier, Bench-Top, 110/240VAC, 2.5 dB Noise Figure, SMA. The PE15A63022 low noise broadband amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses SMA connectors at 50 Ohm. This AC powered low noise broadband amplifier has a SMA gender configuration for input and output ports. This SMA broadband amplifier has a minimum frequency of 10 MHz and maximum frequency of 3 GHz. The PE15A63022 broadband amplifier has 1.7:1 of typical VSWR (Voltage Standing Wave Ratio). The significantly low noise figure of this radio frequency amplifier is 2.5 dB with a typical gain of 36 dB. This SMA AC powered low noise broadband amplifier is ideal for test & measurement, 5G communication, wireless infrastructure, military & commercial communications, military electronic systems, research & development, microwave radio, vsat and fiber optics applications. Our broadband AC powered low noise amplifier is designed to operate on a 110/240 VAC voltage. This RF low noise amplifier has a 1.25 dB typical gain flatness along with 33 dB of minimum gain. Additional specs for this in-series low noise broadband amplifier can be found on its PDF specification datasheet and CAD drawings above. The PE15A63022 broadband amplifier operates over the temperature range of -40 deg C and 85 deg C. Our radio frequency in-series AC powered broadband amplifier from Pasternack has an aluminum body with GaAS semiconductor technology for high efficiency. This coax connectorized low noise broadband amplifier has 21 dB of typical 1dB compression point and 1.7 dBm of typical RF input power. The AC powered broadband amplifier is rated for 23 dBm of typical saturated output power along with typical reverse isolation of -55 dB. Our AC powered broadband radio frequency amplifier is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial low noise broadband amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect broadband AC powered low noise amplifier for your requirement.

1 : $5,150.0
5 : $4,944.0
10 : $4,738.0
25 : $4,532.0

PE15A63031

Pasternack Enterprises

Key Specifications, Power Output: 22 dBm Psat, Frequency, Min: 500 MHz, Frequency, Max: 40 GHz, Gain, Min: 37 dB, Gain, Typical: 44 dB, 3rd Intercept Point: 25 dB, Connector Series: 2.92mm. 44 dB Gain, 20 dBm P1dB, 0.5 GHz to 40 GHz, Broadband AC Low Noise Amplifier, Bench-Top, 110/220VAC, 4.5 dB Noise Figure, 2.92mm. The PE15A63031 low noise broadband amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses 2.92mm connectors at 50 Ohm. This AC powered low noise broadband amplifier has a 2.92mm gender configuration for input and output ports. This 2.92mm broadband amplifier has a minimum frequency of 500 MHz and maximum frequency of 40 GHz. The PE15A63031 broadband amplifier has 2:1 of typical VSWR (Voltage Standing Wave Ratio). The typical gain of this radio frequency amplifier is 44 dB. This 2.92mm AC powered low noise broadband amplifier is ideal for test & measurement, 5G communication, wireless infrastructure, military & commercial communications, military electronic systems, research & development, microwave radio, vsat and fiber optics applications. Our broadband AC powered low noise amplifier is designed to operate on a 110/220 VAC voltage. This RF low noise amplifier has a 3 dB typical gain flatness along with 37 dB of minimum gain. Additional specs for this in-series low noise broadband amplifier can be found on its PDF specification datasheet and CAD drawings above. The PE15A63031 broadband amplifier operates over the temperature range of -40 deg C and 85 deg C. Our radio frequency in-series AC powered broadband amplifier from Pasternack has an aluminum body with GaAS semiconductor technology for high efficiency. This coax connectorized low noise broadband amplifier has 20 dB of typical 1dB compression point and 4.5 dBm of typical RF input power. The AC powered broadband amplifier is rated for 22 dBm of typical saturated output power along with typical reverse isolation of -70 dB. Our AC powered broadband radio frequency amplifier is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial low noise broadband amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect broadband AC powered low noise amplifier for your requirement.

1 : $22,200.0
5 : $21,312.0
10 : $20,424.0
25 : $19,536.0

PE15A63027

Pasternack Enterprises

Key Specifications, Power Output: 27 dBm Psat, Frequency, Min: 100 MHz, Frequency, Max: 6 GHz, Gain, Min: 28 dB, Gain, Typical: 30 dB, Noise Figure, Max: 4.5 dB, 3rd Intercept Point: 36 dB, RF Input VSWR Max: 3:1, RF Output VSWR Max: 2:1, Connector Series: SMA. 30 dB Gain, 25 dBm P1dB, 0.1 GHz to 6 GHz, Broadband AC Low Noise Amplifier, Bench-Top, 110/220VAC, 3.7 dB Noise Figure, SMA. The PE15A63027 low noise broadband amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses SMA connectors at 50 Ohm. This AC powered low noise broadband amplifier has a SMA gender configuration for input and output ports. This SMA broadband amplifier has a minimum frequency of 100 MHz and maximum frequency of 6 GHz. The PE15A63027 broadband amplifier has 2:1 of typical VSWR (Voltage Standing Wave Ratio). The significantly low noise figure of this radio frequency amplifier is 4.5 dB with a typical gain of 30 dB. This SMA AC powered low noise broadband amplifier is ideal for test & measurement, 5G communication, wireless infrastructure, military & commercial communications, military electronic systems, research & development, microwave radio, vsat and fiber optics applications. Our broadband AC powered low noise amplifier is designed to operate on a 110/220 VAC voltage. This RF low noise amplifier has a 1.5 dB typical gain flatness along with 28 dB of minimum gain. Additional specs for this in-series low noise broadband amplifier can be found on its PDF specification datasheet and CAD drawings above. The PE15A63027 broadband amplifier operates over the temperature range of -40 deg C and 85 deg C. Our radio frequency in-series AC powered broadband amplifier from Pasternack has an aluminum body with GaAS semiconductor technology for high efficiency. This coax connectorized low noise broadband amplifier has 25 dB of typical 1dB compression point and 3.7 dBm of typical RF input power. The AC powered broadband amplifier is rated for 27 dBm of typical saturated output power along with typical reverse isolation of -60 dB. Our AC powered broadband radio frequency amplifier is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial low noise broadband amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect broadband AC powered low noise amplifier for your requirement.

1 : $11,200.0
5 : $10,752.0
10 : $10,304.0
25 : $9,856.0

PE15A63028

Pasternack Enterprises

Key Specifications, Power Output: 19 dBm Psat, Frequency, Min: 100 MHz, Frequency, Max: 18 GHz, Gain, Min: 38 dB, Gain, Typical: 42 dB, Noise Figure, Max: 4 dB, 3rd Intercept Point: 27 dB, RF Input VSWR Max: 2:1, RF Output VSWR Max: 2:1, Connector Series: SMA. 42 dB Gain, 16 dBm P1dB, 0.1 GHz to 18 GHz, Broadband AC Low Noise Amplifier, Bench-Top, 110/220VAC, 2.2 dB Noise Figure, SMA. The PE15A63028 low noise broadband amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses SMA connectors at 50 Ohm. This AC powered low noise broadband amplifier has a SMA gender configuration for input and output ports. This SMA broadband amplifier has a minimum frequency of 100 MHz and maximum frequency of 18 GHz. The PE15A63028 broadband amplifier has 1.5:1 of typical VSWR (Voltage Standing Wave Ratio). The significantly low noise figure of this radio frequency amplifier is 4 dB with a typical gain of 42 dB. This SMA AC powered low noise broadband amplifier is ideal for test & measurement, 5G communication, wireless infrastructure, military & commercial communications, military electronic systems, research & development, microwave radio, vsat and fiber optics applications. Our broadband AC powered low noise amplifier is designed to operate on a 110/220 VAC voltage. This RF low noise amplifier has a 1.25 dB typical gain flatness along with 38 dB of minimum gain. Additional specs for this in-series low noise broadband amplifier can be found on its PDF specification datasheet and CAD drawings above. The PE15A63028 broadband amplifier operates over the temperature range of -40 deg C and 85 deg C. Our radio frequency in-series AC powered broadband amplifier from Pasternack has an aluminum body with GaAS semiconductor technology for high efficiency. This coax connectorized low noise broadband amplifier has 16 dB of typical 1dB compression point and 2.2 dBm of typical RF input power. The AC powered broadband amplifier is rated for 19 dBm of typical saturated output power along with typical reverse isolation of -70 dB. Our AC powered broadband radio frequency amplifier is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial low noise broadband amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect broadband AC powered low noise amplifier for your requirement.

1 : $11,600.0
5 : $11,136.0
10 : $10,672.0
25 : $10,208.0

PE15A63004

Pasternack Enterprises

Key Specifications, Gain: 30 dB, Power Output: 10 dBm P1dB, Frequency, Min: 900 MHz, Frequency, Max: 1.2 GHz, Noise Figure, Max: 1.4 dB, Design: Input Protected Low Noise, Connector Series: SMA. 1.2 dB NF Input Protected Low Noise Amplifier, Operating from 900 MHz to 1.2 GHz with 30 dB Gain, 10 dBm P1dB and SMA. PE15A63004 input protected low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized input protected low noise amplifier uses SMA connectors at 50 Ohm. This SMA input protected low noise amplifier has a minimum frequency of 900 MHz and maximum frequency of 1.2 GHz. The significantly low noise figure of this radio frequency amplifier is 1.4 dB with a typical gain of 30 dB. input protected LNA amplifier PE15A63004 is rated at Volts DC maximum and mA. Our input protected low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave input protected low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.

1 : $1,110.0
5 : $1,065.6
10 : $1,021.2

PE15A63024

Pasternack Enterprises

Key Specifications, Power Output: 23 dBm Psat, Frequency, Min: 10 MHz, Frequency, Max: 20 GHz, Gain, Min: 26 dB, Gain, Typical: 29 dB, Noise Figure, Max: 5.5 dB, 3rd Intercept Point: 29 dB, Connector Series: SMA. 29 dB Gain, 22 dBm P1dB, 0.01 GHz to 20 GHz, Broadband AC Low Noise Amplifier, Bench-Top, 110/220VAC, 3.5 dB Noise Figure, SMA. The PE15A63024 low noise broadband amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise broadband amplifier uses SMA connectors at 50 Ohm. This AC powered low noise broadband amplifier has a SMA gender configuration for input and output ports. This SMA broadband amplifier has a minimum frequency of 10 MHz and maximum frequency of 20 GHz. The PE15A63024 broadband amplifier has 1.5:1 of typical VSWR (Voltage Standing Wave Ratio). The significantly low noise figure of this radio frequency amplifier is 5.5 dB with a typical gain of 29 dB. This SMA AC powered low noise broadband amplifier is ideal for test & measurement, 5G communication, wireless infrastructure, military & commercial communications, military electronic systems, research & development, microwave radio, vsat and fiber optics applications. Our broadband AC powered low noise amplifier is designed to operate on a 110/220 VAC voltage. This RF low noise amplifier has a 1.25 dB typical gain flatness along with 26 dB of minimum gain. Additional specs for this in-series low noise broadband amplifier can be found on its PDF specification datasheet and CAD drawings above. The PE15A63024 broadband amplifier operates over the temperature range of -40 deg C and 85 deg C. Our radio frequency in-series AC powered broadband amplifier from Pasternack has an aluminum body with GaAS semiconductor technology for high efficiency. This coax connectorized low noise broadband amplifier has 22 dB of typical 1dB compression point and 3.5 dBm of typical RF input power. The AC powered broadband amplifier is rated for 23 dBm of typical saturated output power along with typical reverse isolation of -65 dB. Our AC powered broadband radio frequency amplifier is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial low noise broadband amplifier can ship worldwide the same day of the purchase as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the perfect broadband AC powered low noise amplifier for your requirement.

1 : $14,400.0
5 : $13,824.0
10 : $13,248.0
25 : $12,672.0

PE15A63019

Pasternack Enterprises

1 : $1,440.0
5 : $1,382.4
10 : $1,324.8
25 : $1,267.2

PE15A63010

Pasternack Enterprises

Key Specifications, Gain: 28 dB, Power Output: 8 dBm P1dB, Frequency, Min: 3.1 GHz, Frequency, Max: 3.5 GHz, Noise Figure, Max: 1 dB, Design: Input Protected Low Noise, Voltage, DC Max: 15 Volts, Current, DC Max: 55 mA, Connector Series: SMA. 0.8 dB NF Input Protected Low Noise Amplifier, Operating from 3.1 GHz to 3.5 GHz with 28 dB Gain, 8 dBm P1dB and SMA. PE15A63010 input protected low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized input protected low noise amplifier uses SMA connectors at 50 Ohm. This SMA input protected low noise amplifier has a minimum frequency of 3.1 GHz and maximum frequency of 3.5 GHz. The significantly low noise figure of this radio frequency amplifier is 1 dB with a typical gain of 28 dB. input protected LNA amplifier PE15A63010 is rated at 15 Volts DC maximum and 55 mA. Our input protected low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave input protected low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.

1 : $700.99
5 : $672.95
10 : $644.91

PE15A63011

Pasternack Enterprises

Key Specifications, Gain: 35 dB, Power Output: 13 dBm P1dB, Frequency, Min: 3.1 GHz, Frequency, Max: 3.5 GHz, Noise Figure, Max: 1 dB, Design: Input Protected Low Noise, Connector Series: SMA. 0.85 dB NF Input Protected Low Noise Amplifier, Operating from 3.1 GHz to 3.5 GHz with 35 dB Gain, 13 dBm P1dB and SMA. PE15A63011 input protected low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized input protected low noise amplifier uses SMA connectors at 50 Ohm. This SMA input protected low noise amplifier has a minimum frequency of 3.1 GHz and maximum frequency of 3.5 GHz. The significantly low noise figure of this radio frequency amplifier is 1 dB with a typical gain of 35 dB. input protected LNA amplifier PE15A63011 is rated at Volts DC maximum and mA. Our input protected low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave input protected low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.

1 : $700.99
5 : $672.95
10 : $644.91

TE Connectivity

RQ73C2A63K4BTD

TE Connectivity

RQ 0805 63K4 0.1% 10PPM 5K RL Resistance Value: 63.4K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 63.4K Ω Thin Film Precision Resistor .1 % | Part Number: RQ73C2A63K4BTD | Internal Number: 6-2176381-9 | TE Connectivity
RoHS : Compliant

2,500 : $0.65
1,000 : $0.67
500 : $0.69
250 : $0.71
100 : $0.72
50 : $0.74
25 : $0.76
10 : $0.78
1 : $0.79

16,841

RP73PF2A634RBTDF

TE Connectivity

RP 2A 0.25W 634R 0.1% 25PPM 1K RL Resistance Value: 634 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 634 Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF2A634RBTDF | Internal Number: 9-2176091-9 | TE Connectivity
RoHS : Compliant

500 : $0.42
250 : $0.43
100 : $0.44
50 : $0.46
25 : $0.47
10 : $0.49
1 : $0.5

856

RP73PF2A63R4BTDF

TE Connectivity

RP 2A 0.25W 63R4 0.1% 25PPM 1K RL Resistance Value: 63.4 Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 63.4 Ω Thin Film Precision Resistor .1 % | Part Number: RP73PF2A63R4BTDF | Internal Number: 2176091-5 | TE Connectivity
RoHS : Compliant

500 : $0.42
250 : $0.43
100 : $0.44
50 : $0.46
25 : $0.47
10 : $0.49
1 : $0.5

388

RN73C2A63K4BTDF

TE Connectivity

RN 0805 63K4 0.1% 10PPM 1KRL Resistance Value: 63.4K Ω Element Type: Thin Film Resistor Type: Precision Resistor Passive Component Tolerance: .1 % Package Size Code: 0805 Surface Mount Resistor | 63.4K Ω Thin Film Precision Resistor .1 % | Part Number: RN73C2A63K4BTDF | Internal Number: 1676399-2 | TE Connectivity
RoHS : Compliant

500 : $0.99
250 : $1.03
100 : $1.06
50 : $1.1
25 : $1.13
10 : $1.17
1 : $1.2

109

YHVA630-2PHM-6MM-A

TE Connectivity

HVA630-2phm,6sqmm,Key A Cable Assembly (End A): HVA630 Plug Operating Voltage: 850 VDC Cable Assembly Configuration: Single Ended Operating Temperature Range: -40 – 125 °C Operating Temperature Range: -40 – 257 °F HVA630 Plug 850 VDC | Electric & Hybrid & Fuel Cell Cable Assembly | Part Number: YHVA630-2PHM-6MM-A | Internal Number: YHVA630-2PHM-6MM-A | TE Connectivity
RoHS : Compliant

1 : $62.38

Vyrian

MGA-635T6-BLKG

Broadcom Limited

Wide Band Medium Power Amplifier, 900MHz Min, 2400MHz Max, 1 Func, GAAS
RoHS : Compliant

8,865

MGA-635T6-TR1G

Broadcom Limited

Wide Band Medium Power Amplifier, 900MHz Min, 2400MHz Max, 1 Func, GAAS
RoHS : Compliant

7,284

A6387DTR

STMicroelectronics

RoHS : Compliant

7,248

MPSA63G

onsemi

Small Signal Bipolar Transistor, 0.5A I(C), 30V V(BR)CEO, 1-Element, PNP, Silicon, TO-92
RoHS : Compliant

7,191

SA636BS,115

NXP Semiconductors

Telecom Circuit, 1-Func, PQCC20
RoHS : Compliant

6,405

TS5A63157DCKRE4

Texas Instruments

SPDT, 1 Func, 1 Channel, PDSO6
RoHS : Compliant

6,272

MGA-633P8-TR1G

Broadcom Limited

Wide Band Medium Power Amplifier, 450MHz Min, 2000MHz Max, 1 Func, GAAS
RoHS : Compliant

5,551

OPA637AUG4

Texas Instruments

Operational Amplifier, 1 Func, 500uV Offset-Max, BIPolar, PDSO8
RoHS : Compliant

5,315

OPA632N/250

Texas Instruments

Operational Amplifier, 1 Func, 11000uV Offset-Max, BIPolar, PDSO6
RoHS : Not Compliant

4,546

MGA-637P8-BLKG

Broadcom Limited

Wide Band Medium Power Amplifier, 1500MHz Min, 2500MHz Max, 1 Func, GAAS
RoHS : Compliant

4,120

OPA637AUE4

Texas Instruments

Operational Amplifier, 1 Func, 500uV Offset-Max, BIPolar, PDSO8
RoHS : Compliant

3,895

MGA-633P8-BLKG

Broadcom Limited

Wide Band Medium Power Amplifier, 450MHz Min, 2000MHz Max, 1 Func, GAAS
RoHS : Compliant

3,663

TPS7A6333EVM

Texas Instruments

3,494

SCHA63T-K03

Murata Manufacturing

Accelerometer/Gyroscope, Digital, 32 Pin, Plastic/epoxy

468

B32653A6334J289

TDK Corporation

Film Capacitor, Polypropylene, 630V, 5% +Tol, 5% -Tol, 0.33uF, Through Hole Mount
RoHS : Compliant

198

Win Source Electronics

MGA-633P8-TR1G

Broadcom Limited

IC LNA ULTRA LOW NOISE ACT BIAS
RoHS : Compliant

295 : $1.0173
240 : $1.0587
185 : $1.1
130 : $1.1828
85 : $1.2241
40 : $1.3068

194,490

GVA-63+

Mini-Circuits

IC RF AMP CATV 10MHZ-6GHZ SOT89
RoHS : Compliant

270 : $1.1182
215 : $1.1637
170 : $1.2091
120 : $1.3
75 : $1.3455
35 : $1.4364

50,985

QCA-6391-0-NSP265-TR-02-0

Qualcomm

HF-TR-QCA6391-1-NSP265-02

41 : $8.2863
33 : $8.6232
25 : $8.96
18 : $9.6338
12 : $9.9706
6 : $10.6443

40,000

MMBTA63LT1G

onsemi

TRANS PNP DARL 30V 0.5A SOT23
RoHS : Compliant

5,080 : $0.0591
3,790 : $0.066
2,935 : $0.0682
2,130 : $0.0705
1,375 : $0.0728
565 : $0.0887

37,656

88EA6321A0-TFJ2A000

Infineon Technologies AG

Infineon SWITCHES

36 : $9.392
27 : $10.4757
21 : $10.8369
16 : $11.1982
10 : $11.5594
4 : $14.088

35,050

MMBTA63LT1

onsemi

TRANS SS DARL PNP 30V SOT23 / Bipolar (BJT) Transistor
RoHS : Not Compliant

3,270 : $0.1028
2,620 : $0.1071
2,015 : $0.1112
1,405 : $0.1196
905 : $0.1238
425 : $0.1322

30,000

MGA-637P8-TR1G

Broadcom Limited

RF Amp Single LNA 2.5GHz 5.5V 8-Pin DFN EP T/R / High Linearity Low Noise Amplifi er | IC AMP CDMA 450MHZ-1.5GHZ 8DFN
RoHS : Compliant

80 : $4.8788
64 : $5.082
49 : $5.2853
35 : $5.6918
22 : $5.8952
11 : $6.3017

24,800

TS5A63157DBVR

Texas Instruments

IC SWITCH SPDT SOT23-6
RoHS : Compliant

665 : $0.4531
495 : $0.5054
385 : $0.5228
280 : $0.5402
180 : $0.5576
75 : $0.6796

5,320

SDINBDA6-32G-ZA1

Western Digital Corp

32GB eMMC iNAND AT EM132 Grade2 v5.1 HS400

5 : $61.1
4 : $68.15
3 : $70.5
2 : $72.85
1 : $75.2

3,040

SDINBDA6-32G

Diodes Incorporated

32GB eMMC iNAND CL EM132

6 : $51.7895
5 : $53.8948
4 : $56.0
3 : $60.2106
2 : $62.3158
1 : $66.5264

3,040

SDINBDA6-32G-XI1

Diodes Incorporated

32GB eMMC iNAND IX EM132 ExtTemp

6 : $55.9091
5 : $58.1819
4 : $60.4546
3 : $65.0001
2 : $67.2728
1 : $71.8182

3,000

OPA637AU/2K5

Texas Instruments

IC OPAMP GP 80MHZ 8SOIC
RoHS : Compliant

10 : $32.4915
7 : $36.2405
6 : $37.4901
4 : $38.7398
3 : $39.9895
2 : $48.7372

2,500

EMZA630ADA101MJA0G

United Chemi-Con Inc

CAP ALUM 100UF 20% 63V SMD

1,550 : $0.2174
1,155 : $0.2425
895 : $0.2508
650 : $0.2592
420 : $0.2676
175 : $0.326

1,770

88EA6352A1-TFJ2A000

Infineon Technologies AG

88EA6352A1-TFJ2A000 Infineon Technologies Infineon SWITCHES datasheet, inventory, & pricing.

8 : $43.4627
6 : $48.4776
5 : $50.1493
4 : $51.8209
3 : $53.4925
1 : $65.1941

1,000

SDINBDA6-32G-ZA

Diodes Incorporated

32GB eMMC iNAND AT EM132 Grade2 v5.1 HS400

5 : $83.2001
4 : $92.8001
3 : $96.0
2 : $99.2001
1 : $102.4

490

A6311MI3JB-T дистрибьютор

ссылки URL