A10203-R-N-ZGF Price, дистрибьютор, Stock

A10203-R-N-ZGF дистрибьютор

дистрибьютор

номер детали

производитель

подробное описание детали

Price

Qty.
BuyNow

Chip-Germany GmbH

TJA1024HGZ

NXP Semiconductors

RoHS : Compliant

3,000

Maritex

TJA1021T/20/CM

NXP Semiconductors

Other Interface ICs; TJA1021T/20/CM; NXP SEMICONDUCTORS; 8; 27 V; 5.5 V; SOIC

1,000 : $0.294
500 : $0.307
100 : $0.33
30 : $0.399
10 : $0.473
1 : $0.667

83,811

RCA102RJLF

Hong Kong Resistors Manufactory

Surface Mount Resistors; RCA102RJLF; HKR

1,500 : $0.004
500 : $0.005
50 : $0.006
1 : $0.019

50,000

RCA1022RJLF

Hong Kong Resistors Manufactory

Surface Mount Resistors; RCA1022RJLF; HKR

3,000 : $0.003
1,000 : $0.003
100 : $0.004
1 : $0.013

50,000

RCA10220RJLF

Hong Kong Resistors Manufactory

Surface Mount Resistors; RCA10220RJLF; HKR

3,000 : $0.003
1,000 : $0.003
100 : $0.004
1 : $0.013

50,000

RCA10220KJLF

Hong Kong Resistors Manufactory

Surface Mount Resistors; RCA10220KJLF; HKR

1,500 : $0.003
500 : $0.003
50 : $0.004
1 : $0.013

50,000

TJA1021T/10/C,118

NXP Semiconductors

LIN Bus Transceivers; TJA1021T/10/C,118; NXP SEMICONDUCTORS; 8; 5.5 V; 27 V
RoHS : Compliant

1,000 : $1.21
500 : $1.355
250 : $1.442
100 : $1.619
25 : $1.772
10 : $1.933
1 : $2.22

16,305

CGA2B1C0G2A102JT0Y0E

TDK Corporation

Ceramic Capacitors; CGA2B1C0G2A102JT0Y0E; TDK

10,000 : $0.011
1 : $0.017

6,524

TJA1029TK,118

NXP Semiconductors

LIN Bus Transceivers; TJA1029TK,118; NXP SEMICONDUCTORS; 8; -300 mV; 42 V
RoHS : Compliant

500 : $0.703
100 : $0.806
25 : $0.872
10 : $0.931
1 : $1.054

5,664

CD45-E2GA102M-GKA

TDK Corporation

Ceramic Capacitors; CD45-E2GA102M-GKA; TDK
RoHS : Compliant

5,654

VJ0805A102FXACW1BC

Vishay Intertechnologies

Ceramic capacitor SMD; 0805; 1nF; 50V; NP0; 1%
RoHS : Compliant

24,000 : $0.084
8,000 : $0.09
4,000 : $0.097
1,000 : $0.117
500 : $0.127
100 : $0.152
10 : $0.172
1 : $0.371

4,000

JCB160808A-102-1

Jantek Electronics Co.

Ferrite bead SMD; 0603; 0.2Ohm; 1000A; IMPEDANCE 1000 +- 25%; -55 deg.C-125 deg.C

1,000 : $0.018
500 : $0.024
100 : $0.031
1 : $0.041

2,431

RDF1A102MISVT7

DAEWOO Electronic Components

Electrolytic capacitor Low Z; ECRDF; 1000uF; 10V; 105deg.C; 10x16 r5mm

500 : $0.105
250 : $0.133
100 : $0.281
1 : $0.294

2,007

2SA1020G-Y-AB3-R

Unisonic Technologies Co Ltd

Bipolar Transistors (BJT); 2SA1020G-Y-AB3-R; UTC
RoHS : Not Compliant

4,000 : $0.044
2,500 : $0.048
500 : $0.063
150 : $0.074
50 : $0.088
5 : $0.119
1 : $0.3734

1,558

C242A102J20C000

Xiamen Faratronic Co Ltd

Polyester capacitor; 1nF; 100V; 5%; p=5mm; 7.2x2.5x6.5mm; -55+125deg.C
RoHS : Compliant

2,000 : $0.038
1,000 : $0.044
500 : $0.048
100 : $0.052
1 : $0.079

990

TJA1028TK/5V0/20/1

NXP Semiconductors

Other Interface ICs; TJA1028TK/5V0/20/1; NXP SEMICONDUCTORS

1,000 : $0.857
300 : $0.939
100 : $1.031
30 : $1.113
10 : $1.376
1 : $1.685

364

Pasternack Enterprises US

PE3CA1025-6

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UMCX 2.5, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-137mm, RF Cable Type: 1.37mm, RF Cable Impedance: 50 Ohm, Length: 6 inches. SMA Male to UMCX 2.5 Plug Cable 6 Inch Length Using 1.37mm Coax, RoHS., Radio frequency assembly SMA male to UMCX 2.5 plug cable 6 inch length using 1.37mm coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to UMCX 2.5 plug cable 6 inch length using 1.37mm coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to UMCX 2.5 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and UMCX 2.5 cable connection on the other. Our SMA to UMCX 2.5 cable assemblies have a male gender on end 1 and plug on end 2. This SMA to UMCX 2.5 cable is a male to plug coax assembly, PE3CA1025-6, can also be known as a SMA plug to UMCX 2.5 male cable assembly and will be shipped same-day as it is purchased. SMA plug to UMCX 2.5 male cable assembly PE3CA1025-6 is built with 1.37mm which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to UMCX 2.5 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMA male to UMCX 2.5 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1025-6 can also be used in the other direction and will be UMCX 2.5 plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to UMCX 2.5 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to UMCX 2.5 cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to UMCX 2.5 plug cable 6 inch length using 1.37mm coax, RoHS.

1 : $33.89
25 : $32.2
50 : $30.5
100 : $29.15

377

PE3FCA102-1M

Pasternack Enterprises

Key Specifications, Mode: Multimode, Multimode Class: OM3, Fiber Diameter: 50/125, Cable Assembly Color: Aqua Blue, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: SC, Connector 1 Polish Type: UPC, Connector 2 Series: ST, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 2 mm, Max Crush Resistance, Short Term (N/100mm): 200, Max Crush Resistance, Long Term (N/100mm): 50, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. Fiber Optic Patch Cable, Simplex SC UPC to ST UPC, MM OM3, 2.0mm LSZH, Aqua-1M. Pasternack’s PE3FCA102-1M fiber optic patch cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 1-meter long patch cable assembly is equipped with simplex SC/UPC to ST/UPC connectors. Our aqua blue fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This multimode OM3 patch cable assembly is optimized for high-speed, high-bandwidth data transfer, supporting faster and longer-distance connectivity than OM1 fiber. The fiber optic jumper from Pasternack is suitable for applications such as telecom and networking, data centers, enterprise and corporate networks, broadcasting and media production, military and defense, healthcare and medical imaging, transportation and rail and oil and gas. With the flexibility of custom lengths, the PE3FCA102-1M fiber optic assembly can be tailored to meet specific installation requirements, ensuring efficient network management in high-density setups without compromising on delivery time or quality. Additional dimensions, specifications, and CAD drawings for this fiber optic patch cord component can be found on its downloadable PDF datasheet. Pasternack has one of the largest in-stock selections of SC/UPC to ST/UPC fiber optic patch cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM3 multimode fiber optic cable that meets your requirements.

1 : $24.09
5 : $23.13
10 : $22.16
25 : $21.2

286

PE3CA1020

Pasternack Enterprises

102

PE3CA1020-9

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: UMCX 2.5, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178-DS, RF Cable Type: RG178-DS, RF Cable Impedance: 50 Ohm, Length: 9 inches. Reverse Polarity SMA Female Bulkhead to UMCX 2.5 Plug Cable 9 Inch Length Using RG178-DS Coax, RoHS., Radio frequency assembly reverse polarity SMA female bulkhead to UMCX 2.5 plug cable 9 inch length using RG178-DS coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Reverse polarity SMA female bulkhead to UMCX 2.5 plug cable 9 inch length using RG178-DS coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to UMCX 2.5 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA bulkhead cable connection on one end and UMCX 2.5 cable connection on the other. Our reverse polarity SMA to UMCX 2.5 cable assemblies have a female gender on end 1 and plug on end 2. This reverse polarity SMA to UMCX 2.5 cable is a female to plug coax assembly, PE3CA1020-9, can also be known as a reverse polarity SMA jack to UMCX 2.5 male cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA jack to UMCX 2.5 male cable assembly PE3CA1020-9 is built with RG178-DS which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to UMCX 2.5 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency reverse polarity SMA female bulkhead to UMCX 2.5 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1020-9 can also be used in the other direction and will be UMCX 2.5 plug to reverse polarity SMA female bulkhead cable assembly if the opposite connectivity is required. SMA reverse polarity jack bulkhead to UMCX 2.5 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to UMCX 2.5 cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA female bulkhead to UMCX 2.5 plug cable 9 inch length using RG178-DS coax, RoHS.

1 : $21.89
25 : $20.8
50 : $19.7
100 : $18.83

PEWCA1021

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-34, Coax Connector Series: 2.92mm, Coax Connector Gender: Female, Waveguide Adapter Style: Right Angle, Minimum Frequency: 22 GHz, Maximum Frequency: 33 GHz, Maximum VSWR: 1.25:1. WR-34 UG-1530/U Square Cover Flange to 2.92mm Female Waveguide to Coax Adapter Operating from 22 GHz to 33 GHz. PEWCA1021 WR-34 waveguide to coax adapter is also known as a WR-34 waveguide transition. This waveguide to coax adapter / transition is constructed as a WR34 to 2.92mm connector and has a female gender. Our WR-34 to 2.92mm female waveguide adapter transition has a right angle design and has a square cover flange. Pasternack right angle WR-34 to 2.92mm waveguide to coaxial cable transition / adapter has a minimum frequency of 22 GHz and a maximum frequency of 33 GHz. WR 34 waveguide to 2.92mm transition adapter to coax PEWCA1021 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our WR-34 waveguide adapter transition with 2.92mm interface can ship worldwide the same day that it is purchased as with our other available RF parts.

1 : $1,100.0
5 : $1,056.0
10 : $1,012.0

PE15A1026

Pasternack Enterprises

Key Specifications, Gain: 28 dB, Power Output: 13 dBm Psat, Frequency, Min: 8 GHz, Frequency, Max: 12 GHz, Design: Low Noise, Voltage, DC Max: 13 Volts, Current, DC Max: 200 mA, Connector Series: SMA. 2.2 dB NF, 13 dBm Psat, 8 GHz to 12 GHz, Low Noise Amplifier, 28 dB Gain, SMA. PE15A1026 low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise amplifier uses SMA connectors at 50 Ohm. This SMA low noise amplifier has a minimum frequency of 8 GHz and maximum frequency of 12 GHz. LNA amplifier PE15A1026 is rated at 13 Volts DC maximum and 200 mA. Our low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.

1 : $3,330.0
5 : $3,196.8
10 : $3,063.6

PE3CA1028-3

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: UMCX 2.1, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-81mm, RF Cable Type: 0.81mm, RF Cable Impedance: 50 Ohm, Length: 3 inches. SMA Male to UMCX 2.1 Plug Cable 3 Inch Length Using 0.81mm Coax, RoHS., Radio frequency assembly SMA male to UMCX 2.1 plug cable 3 inch length using 0.81mm coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to UMCX 2.1 plug cable 3 inch length using 0.81mm coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to UMCX 2.1 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and UMCX 2.1 cable connection on the other. Our SMA to UMCX 2.1 cable assemblies have a male gender on end 1 and plug on end 2. This SMA to UMCX 2.1 cable is a male to plug coax assembly, PE3CA1028-3, can also be known as a SMA plug to UMCX 2.1 male cable assembly and will be shipped same-day as it is purchased. SMA plug to UMCX 2.1 male cable assembly PE3CA1028-3 is built with 0.81mm which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to UMCX 2.1 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMA male to UMCX 2.1 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1028-3 can also be used in the other direction and will be UMCX 2.1 plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to UMCX 2.1 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to UMCX 2.1 cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to UMCX 2.1 plug cable 3 inch length using 0.81mm coax, RoHS.

1 : $31.69
25 : $30.11
50 : $28.52
100 : $27.25

PEWCA1024

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-75, Coax Connector Series: SMA, Coax Connector Gender: Female, Waveguide Adapter Style: Right Angle, Minimum Frequency: 10 GHz, Maximum Frequency: 15 GHz, Maximum VSWR: 1.25:1. WR-75 Square Cover Flange to SMA Female Waveguide to Coax Adapter Operating from 10 GHz to 15 GHz, X-Ku Band. PEWCA1024 WR-75 waveguide to coax adapter is also known as a WR-75 waveguide transition. This waveguide to coax adapter / transition is constructed as a WR 75 to SMA connector and has a female gender. Our WR75 to SMA female waveguide adapter transition has a right angle design and has a square cover flange. Pasternack right angle WR75 to SMA waveguide to coaxial cable transition / adapter has a minimum frequency of 10 GHz and a maximum frequency of 15 GHz. WR-75 waveguide to SMA transition adapter to coax PEWCA1024 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our WR-75 waveguide adapter transition with SMA interface can ship worldwide the same day that it is purchased as with our other available RF parts.

1 : $722.99
10 : $694.07
25 : $665.15

PE3CA1020-6

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: UMCX 2.5, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178-DS, RF Cable Type: RG178-DS, RF Cable Impedance: 50 Ohm, Length: 6 inches. Reverse Polarity SMA Female Bulkhead to UMCX 2.5 Plug Cable 6 Inch Length Using RG178-DS Coax, RoHS., Radio frequency assembly reverse polarity SMA female bulkhead to UMCX 2.5 plug cable 6 inch length using RG178-DS coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Reverse polarity SMA female bulkhead to UMCX 2.5 plug cable 6 inch length using RG178-DS coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to UMCX 2.5 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA bulkhead cable connection on one end and UMCX 2.5 cable connection on the other. Our reverse polarity SMA to UMCX 2.5 cable assemblies have a female gender on end 1 and plug on end 2. This reverse polarity SMA to UMCX 2.5 cable is a female to plug coax assembly, PE3CA1020-6, can also be known as a reverse polarity SMA jack to UMCX 2.5 male cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA jack to UMCX 2.5 male cable assembly PE3CA1020-6 is built with RG178-DS which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to UMCX 2.5 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency reverse polarity SMA female bulkhead to UMCX 2.5 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1020-6 can also be used in the other direction and will be UMCX 2.5 plug to reverse polarity SMA female bulkhead cable assembly if the opposite connectivity is required. SMA reverse polarity jack bulkhead to UMCX 2.5 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to UMCX 2.5 cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA female bulkhead to UMCX 2.5 plug cable 6 inch length using RG178-DS coax, RoHS.

1 : $31.29
25 : $29.73
50 : $28.16
100 : $26.91

PE15A1028

Pasternack Enterprises

Key Specifications, Gain: 40 dB, Power Output: 12 dBm P1dB, Frequency, Min: 1.2 GHz, Frequency, Max: 1.6 GHz, Noise Figure, Max: 0.8 dB, Design: Low Noise, Voltage, DC Max: 15 Volts, Current, DC Max: 120 mA, Connector Series: SMA. 40 dB Gain, 0.7 dB NF, 12 dBm P1dB, 1.2 GHz to 1.6 GHz, Low Noise Amplifier, SMA. PE15A1028 low noise amplifier from Pasternack (also known as LNA) is featured in our extensive in-stock RF amplifier selection. Our connectorized low noise amplifier uses SMA connectors at 50 Ohm. This SMA low noise amplifier has a minimum frequency of 1.2 GHz and maximum frequency of 1.6 GHz. The significantly low noise figure of this radio frequency amplifier is 0.8 dB with a typical gain of 40 dB. LNA amplifier PE15A1028 is rated at 15 Volts DC maximum and 120 mA. Our low noise radio frequency LNA amp is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial millimeter wave low noise amplifier can ship worldwide the same day of the purchase as with our other available RF parts.

1 : $1,180.0
5 : $1,132.8
10 : $1,085.6

PEWCA1029

Pasternack Enterprises

Key Specifications, Waveguide Size: WR-75, Coax Connector Impedance: 50 Ohm, Coax Connector Series: N, Coax Connector Gender: Female, Waveguide Adapter Style: Right Angle, Minimum Frequency: 10 GHz, Maximum Frequency: 15 GHz. WR-75 Square Cover Flange to Type N Female Waveguide to Coax Adapter, 10 GHz to 15 GHz, M Band, Aluminum, Paint. PEWCA1029 WR-75 waveguide to coax adapter is also known as a WR-75 waveguide transition. This waveguide to coax adapter / transition is constructed as a WR 75 to type N connector and has a female gender. Our WR-75 to type N female waveguide adapter transition has a right angle design and has a square cover flange. Pasternack right angle WR75 to N type waveguide to coaxial cable transition / adapter has a minimum frequency of 10 GHz and a maximum frequency of 15 GHz. WR-75 waveguide to type N transition adapter to coax PEWCA1029 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our WR-75 waveguide adapter transition with N type interface can ship worldwide the same day that it is purchased as with our other available RF parts.

1 : $1,160.0
5 : $1,113.6
10 : $1,067.2

PE3CA1025-19

Pasternack Enterprises

1 : $48.19
25 : $45.78
50 : $43.37
100 : $41.44

PE3CA1020-12

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: UMCX 2.5, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG178-DS, RF Cable Type: RG178-DS, RF Cable Impedance: 50 Ohm, Length: 12 inches. Reverse Polarity SMA Female Bulkhead to UMCX 2.5 Plug Cable 12 Inch Length Using RG178-DS Coax, RoHS., Radio frequency assembly reverse polarity SMA female bulkhead to UMCX 2.5 plug cable 12 inch length using RG178-DS coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Reverse polarity SMA female bulkhead to UMCX 2.5 plug cable 12 inch length using RG178-DS coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to UMCX 2.5 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity SMA bulkhead cable connection on one end and UMCX 2.5 cable connection on the other. Our reverse polarity SMA to UMCX 2.5 cable assemblies have a female gender on end 1 and plug on end 2. This reverse polarity SMA to UMCX 2.5 cable is a female to plug coax assembly, PE3CA1020-12, can also be known as a reverse polarity SMA jack to UMCX 2.5 male cable assembly and will be shipped same-day as it is purchased. Reverse polarity SMA jack to UMCX 2.5 male cable assembly PE3CA1020-12 is built with RG178-DS which is a flexible coax type. The Pasternack flexible reverse polarity SMA cable assembly is manufactured with SMA to UMCX 2.5 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency reverse polarity SMA female bulkhead to UMCX 2.5 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1020-12 can also be used in the other direction and will be UMCX 2.5 plug to reverse polarity SMA female bulkhead cable assembly if the opposite connectivity is required. SMA reverse polarity jack bulkhead to UMCX 2.5 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to UMCX 2.5 cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity SMA female bulkhead to UMCX 2.5 plug cable 12 inch length using RG178-DS coax, RoHS.

1 : $22.49
25 : $21.37
50 : $20.24
100 : $19.34

PE3CA1029-6

Pasternack Enterprises

Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: WMCX 1.6, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-81mm, RF Cable Type: 0.81mm, RF Cable Impedance: 50 Ohm, Length: 6 inches. SMA Male to WMCX 1.6 Plug Cable 6 Inch Length Using 0.81mm Coax, RoHS., Radio frequency assembly SMA male to WMCX 1.6 plug cable 6 inch length using 0.81mm coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to WMCX 1.6 plug cable 6 inch length using 0.81mm coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to WMCX 1.6 cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and WMCX 1.6 cable connection on the other. Our SMA to WMCX 1.6 cable assemblies have a male gender on end 1 and plug on end 2. This SMA to WMCX 1.6 cable is a male to plug coax assembly, PE3CA1029-6, can also be known as a SMA plug to WMCX 1.6 male cable assembly and will be shipped same-day as it is purchased. SMA plug to WMCX 1.6 male cable assembly PE3CA1029-6 is built with 0.81mm which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to WMCX 1.6 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency SMA male to WMCX 1.6 plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3CA1029-6 can also be used in the other direction and will be WMCX 1.6 plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to WMCX 1.6 male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to WMCX 1.6 cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to WMCX 1.6 plug cable 6 inch length using 0.81mm coax, RoHS.

1 : $21.89
25 : $20.8
50 : $19.7
100 : $18.83

PE3CA1025-36

Pasternack Enterprises

1 : $124.99
25 : $118.74
50 : $112.49
100 : $107.49