95320480ACNFMNFZCWC Price, дистрибьютор, Stock

Thermomagnetic device circuit breaker - number of positions: 1 - connection method: Screw connection - cross section: 0.2 mm²- 6 mm² - AWG: 24 - 10 - nominal current: 8 A - width: 12.5 mm - fuse type: Automatic device - mounting type: DIN rail: 35 mm - Color: black
RoHS : Compliant

5 : $28.6
1 : $30.11

VG95328A20-16PN

ITT Interconnect Solutions

Circular Connector - Wall Mount w/Endbell - Contact Arrangement: 20-16 - Pins - Bayonet Coupling
RoHS : Compliant

50 : $60.09
38 : $61.31
25 : $78.48
13 : $122.62

VG95328A8-3ASN

ITT Interconnect Solutions

Circular Connector - Wall Mount w/Endbell - Contact Arrangement: 8-3A - Sockets - Bayonet Coupling
RoHS : Compliant

50 : $34.19
38 : $34.89
25 : $44.66
13 : $69.78

VG95328C14-19PN-1J

ITT Interconnect Solutions

RoHS : Not Compliant

50 : $34.88
38 : $35.59
25 : $45.55
13 : $71.17

VG95328C16-26PN-1J

ITT Interconnect Solutions

RoHS : Not Compliant

50 : $38.13
38 : $38.91
25 : $49.81
13 : $77.83

VG95328D10-6PW

ITT Interconnect Solutions

Circular Connector - Jam Nut Receptacle - Contact Arrangement: 10-6 - Pins - Bayonet Coupling
RoHS : Compliant

50 : $43.97
38 : $44.86
25 : $57.42
13 : $89.72

VG95328D12-3PN

ITT Interconnect Solutions

Circular Connector - Jam Nut Receptacle - Contact Arrangement: 12-3 - Pins - Bayonet Coupling
RoHS : Compliant

50 : $44.05
38 : $44.95
25 : $57.54
13 : $89.9

VG95328D8-3APNJ

ITT Interconnect Solutions

Circular Connector - Jam Nut Receptacle - Contact Arrangement: 8-3A - Pins - Bayonet Coupling
RoHS : Not Compliant

50 : $52.17
38 : $53.24
25 : $68.14
13 : $106.47

VG95328H20-16SN

ITT Interconnect Solutions

Circular Connector - Front Panel Mount - Contact Arrangement: 20-16 - Sockets - Bayonet Coupling
RoHS : Compliant

50 : $59.62
38 : $60.84
25 : $77.87
13 : $121.67

Pasternack Enterprises US

PE35953-24

Pasternack Enterprises

Key Specifications, Connector Series 1: FME, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: FME, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 24 inches. FME Plug to FME Plug Cable 24 Inch Length Using RG58 Coax., Radio frequency assembly FME plug to FME plug cable 24 inch length using RG58 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. FME plug to FME plug cable 24 inch length using RG58 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FME to FME cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FME cable connection on one end and FME cable connection on the other. Our FME to FME cable assemblies have a plug gender on end 1 and plug on end 2. This FME to FME cable is a plug to plug coax assembly, PE35953-24, can also be known as a FME male to FME male cable assembly and will be shipped same-day as it is purchased. FME male to FME male cable assembly PE35953-24 is built with RG58 which is a flexible coax type. The Pasternack flexible FME cable assembly is manufactured with FME to FME cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this FME plug to FME plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. FME male to FME male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FME to FME cable assembly for quick shipment worldwide. Variations of FME cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this FME plug to FME plug cable 24 inch length using RG58 coax.

1 : $60.99
25 : $57.94
50 : $54.89
100 : $52.45

840

PE9532

Pasternack Enterprises

Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Reverse Polarity, Connector Impedance 2: 50 Ohm, Adapter Body Style: Straight, Connector Mount Method 1: None, Connector Body Material 1: Brass, Connector Body Plating 1: Nickel, Connector Mount Method 2: None. TNC Male to RP-TNC Female Adapter. TNC adapter PE9532 is one of over 40,000 available RF, microwave and millimeter wave components from Pasternack. Our TNC to TNC adapter is a in-series coaxial adapter design. This 50 Ohm TNC adapter is precision manufactured to RF components industry specifications. TNC male to reverse polarity TNC female adapter is one of the many RF components that ship same day as they are ordered. PE9532 male TNC to female TNC adapter has a straight body. This Pasternack straight TNC coax adapter is a in-line RF adapter. Our male TNC to female TNC adapter PE9532 is shipped from our facility certified to ISO 9001:2015 the same day as purchased. This TNC to TNC radio frequency adapter is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies.

1 : $77.99
25 : $74.09
50 : $70.19
100 : $67.07

419

PE3W08953-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: N, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Male to N Male Right Angle Low Loss Cable 24 Inch Length Using LMR-200 Coax., Radio frequency assembly N male to N male right angle low loss cable 24 inch length using LMR-200 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to N male right angle low loss cable 24 inch length using LMR-200 coax, type N cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with type N cable connection on one end and right angle N type cable connection on the other. Our low loss type N to right angle type N cable assemblies have a male gender on end 1 and male on end 2. PE3W08953-24 can also be known as a low loss N type plug to right angle type N plug cable assembly and will be shipped same-day as it is purchased. Type N plug to type N plug cable assembly PE3W08953-24 is built with LMR-200 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with type N to right angle N type cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to N type right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W08953-24 can also be used in the other direction and will be right angle N type male to type N male cable assembly if the opposite connectivity is required. Low loss type N plug to type N right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to type N cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to N male right angle low loss cable 24 inch length using LMR-200 coax.

1 : $181.99
25 : $172.89
50 : $163.79
100 : $156.51

PE3C9532-6

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 6 inches. N Female Bulkhead to Straight Cut Lead Cable 6 Inch Length Using PE-P086 Coax., Radio frequency assembly N female bulkhead to straight cut lead cable 6 inch length using PE-P086 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to straight cut lead cable 6 inch length using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a straight cut lead cable connection on the other. Our type N to straight cut lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C9532-6 can also be known as a type N jack to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9532-6 RF cable has a FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 110 dB. Type N jack to straight cut lead sexless cable assembly PE3C9532-6 is built with PE-P086 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to straight cut lead cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9532-6 can also be used in the other direction and will be a straight cut lead sexless to type N female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to straight cut lead cable assembly for quick shipment worldwide. Variations of type N and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to Straight Cut Lead RF cable assembly as per your requirements.

1 : $65.99
25 : $62.69
50 : $59.39
100 : $56.75

PE3C2953-24

Pasternack Enterprises

Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P300LL, RF Cable Type: PE-P300LL, RF Cable Impedance: 50 Ohm, Length: 24 inches. N Male Right Angle to N Female Bulkhead Low Loss Test Cable 24 Inch Length Using PE-P300LL Coax., Radio frequency assembly N male right angle to N female bulkhead low loss test cable 24 inch length using PE-P300LL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. N male right angle to N female bulkhead low loss test cable 24 inch length using PE-P300LL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom N type to type N cable assembly orders will ship same day as well. Pasternack RF coax low loss test cable assembly is built with right angle type N cable connection on one end and type N bulkhead cable connection on the other. Our low loss test right angle N type to type N cable assemblies have a male gender on end 1 and female on end 2. This type N to type N cable is a male to female coax assembly, PE3C2953-24, can also be known as a low loss test right angle N type plug to type N jack cable assembly and will be shipped same-day as it is purchased. N type plug to type N jack cable assembly PE3C2953-24 is built with PE-P300LL which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with right angle type N to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency N type right angle male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2953-24 can also be used in the other direction and will be N type female bulkhead to right angle type N male cable assembly if the opposite connectivity is required. Low loss test type N right angle plug to type N jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality N type to type N cable assembly for quick shipment worldwide. Variations of type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male right angle to N female bulkhead low loss test cable 24 inch length using PE-P300LL coax.

1 : $585.0
25 : $555.75
50 : $526.5

PE3953-24

Pasternack Enterprises

Key Specifications, Connector Series 1: BNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG214/U, RF Cable Type: RG214, RF Cable Impedance: 50 Ohm, Length: 24 inches. BNC Female to BNC Female Cable 24 Inch Length Using RG214 Coax., Radio frequency assembly BNC female to BNC female cable 24 inch length using RG214 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. BNC female to BNC female cable 24 inch length using RG214 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our BNC to BNC cable assemblies have a female gender on end 1 and female on end 2. This BNC to BNC cable is a female to female coax assembly, PE3953-24, can also be known as a BNC jack to BNC jack cable assembly and will be shipped same-day as it is purchased. BNC jack to BNC jack cable assembly PE3953-24 is built with RG214 which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this BNC female to BNC female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. BNC jack to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this BNC female to BNC female cable 24 inch length using RG214 coax.

1 : $175.99
25 : $167.19
50 : $158.39

PE3W19532

Pasternack Enterprises

Key Specifications, Connector Series 1: UHF, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 10KV, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG303HV, RF Cable Type: RG303 Hi Voltage, RF Cable Impedance: 50 Ohm. UHF Male to 10KV Male Cable Using RG303HV Coax. PE3W19532 is a UHF male to 10KV male cable using RG303 Hi Voltage coax. This Pasternack UHF male to 10KV male cable assembly uses a 50 Ohm UHF for connector 1 and a 50 Ohm 10KV for connector 2. Our male UHF to male 10KV cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W19532 UHF male to 10KV male cable assembly is constructed with RG303 Hi Voltage coax.

PE3C9532-36

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 36 inches. N Female Bulkhead to Straight Cut Lead Cable 36 Inch Length Using PE-P086 Coax., Radio frequency assembly N female bulkhead to straight cut lead cable 36 inch length using PE-P086 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to straight cut lead cable 36 inch length using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a straight cut lead cable connection on the other. Our type N to straight cut lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C9532-36 can also be known as a type N jack to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9532-36 RF cable has a FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 110 dB. Type N jack to straight cut lead sexless cable assembly PE3C9532-36 is built with PE-P086 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to straight cut lead cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9532-36 can also be used in the other direction and will be a straight cut lead sexless to type N female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to straight cut lead cable assembly for quick shipment worldwide. Variations of type N and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to Straight Cut Lead RF cable assembly as per your requirements.

1 : $99.99
25 : $94.99
50 : $89.99
100 : $85.99

PE39532

Pasternack Enterprises

PE3C7953-24

Pasternack Enterprises

Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 4.3-10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-402, RF Cable Type: TFT-402, RF Cable Impedance: 50 Ohm, Length: 24 inches. 4.3-10 Male to 4.3-10 Male Right Angle Low PIM Cable 24 Inch Length Using TFT-402 Coax Using Times Microwave Components., Radio frequency assembly 4.3-10 male to 4.3-10 male right angle low PIM cable 24 inch length using TFT-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 4.3-10 male to 4.3-10 male right angle low PIM cable 24 inch length using TFT-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 4.3-10 to 4.3-10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with 4.3-10 cable connection on one end and right angle 4.3-10 cable connection on the other. Our low PIM 4.3-10 to right angle 4.3-10 cable assemblies have a male gender on end 1 and male on end 2. This 4.3-10 to 4.3-10 cable is a male to male coax assembly, PE3C7953-24, can also be known as a low PIM 4.3-10 plug to right angle 4.3-10 plug cable assembly and will be shipped same-day as it is purchased. 4.3-10 plug to 4.3-10 plug cable assembly PE3C7953-24 is built with TFT-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible 4.3-10 cable assembly is manufactured with 4.3-10 to right angle 4.3-10 cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM 4.3-10 male to 4.3-10 right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7953-24 can also be used in the other direction and will be right angle 4.3-10 male to 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM 4.3-10 plug to 4.3-10 right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 4.3-10 to 4.3-10 cable assembly for quick shipment worldwide. Variations of 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 4.3-10 male to 4.3-10 male right angle low PIM cable 24 inch length using TFT-402 coax using Times Microwave components.

1 : $94.99
25 : $90.24
50 : $85.49
100 : $81.69

PE3C9532

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm. N Female Bulkhead to Straight Cut Lead Cable Using PE-P086 Coax., Radio frequency assembly N female bulkhead to straight cut lead cable using PE-P086 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to straight cut lead cable using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a straight cut lead cable connection on the other. Our type N to straight cut lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C9532 can also be known as a type N jack to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9532 RF cable has a FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 110 dB. Type N jack to straight cut lead sexless cable assembly PE3C9532 is built with PE-P086 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to straight cut lead cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9532 can also be used in the other direction and will be a straight cut lead sexless to type N female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to straight cut lead cable assembly for quick shipment worldwide. Variations of type N and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to Straight Cut Lead RF cable assembly as per your requirements.

PE3C9532-12

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. N Female Bulkhead to Straight Cut Lead Cable 12 Inch Length Using PE-P086 Coax., Radio frequency assembly N female bulkhead to straight cut lead cable 12 inch length using PE-P086 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to straight cut lead cable 12 inch length using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a straight cut lead cable connection on the other. Our type N to straight cut lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C9532-12 can also be known as a type N jack to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9532-12 RF cable has a FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 110 dB. Type N jack to straight cut lead sexless cable assembly PE3C9532-12 is built with PE-P086 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to straight cut lead cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9532-12 can also be used in the other direction and will be a straight cut lead sexless to type N female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to straight cut lead cable assembly for quick shipment worldwide. Variations of type N and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to Straight Cut Lead RF cable assembly as per your requirements.

1 : $72.99
25 : $69.34
50 : $65.69
100 : $62.77

PE3C9532-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. N Female Bulkhead to Straight Cut Lead Cable 24 Inch Length Using PE-P086 Coax., Radio frequency assembly N female bulkhead to straight cut lead cable 24 inch length using PE-P086 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to straight cut lead cable 24 inch length using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a straight cut lead cable connection on the other. Our type N to straight cut lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C9532-24 can also be known as a type N jack to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9532-24 RF cable has a FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 110 dB. Type N jack to straight cut lead sexless cable assembly PE3C9532-24 is built with PE-P086 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to straight cut lead cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9532-24 can also be used in the other direction and will be a straight cut lead sexless to type N female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to straight cut lead cable assembly for quick shipment worldwide. Variations of type N and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to Straight Cut Lead RF cable assembly as per your requirements.

1 : $86.99
25 : $82.64
50 : $78.29
100 : $74.81

PE33953-24

Pasternack Enterprises

Key Specifications, Connector 1 Series: SMB, Connector 1 Gender: Jack, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. SMB Jack to BNC Female Cable 24 Inch Length Using RG316 Coax., Radio frequency assembly SMB jack to BNC female cable 24 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMB jack to BNC female cable 24 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMB to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with SMB cable connection on one end and BNC cable connection on the other. Our SMB to BNC cable assembly has jack gender on end 1 and female on end 2. PE33953-24 can also be known as a SMB female to BNC jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. SMB female to BNC jack cable assembly PE33953-24 is built with RG316 which is a flexible coax type. The Pasternack flexible SMB cable assembly is manufactured with SMB to BNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE33953-24 RF cable are available on our downloadable PDF datasheet.PE33953-24 can also be used in the other direction and will be BNC female to SMB jack cable assembly if the opposite connectivity is required. SMB female to BNC jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMB to BNC cable assembly for quick shipment worldwide. Variations of SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal SMB RF cable assembly as per your requirements.

1 : $80.99
25 : $76.94
50 : $72.89
100 : $69.65

PE3C9532-48

Pasternack Enterprises

Key Specifications, Connector 1 Series: N, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Straight Cut Lead, Connector 2 Gender: Hermaphroditic, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: PE-P086, RF Cable Type: PE-P086, RF Cable Impedance: 50 Ohm, Length, Max: 48 inches. N Female Bulkhead to Straight Cut Lead Cable 48 Inch Length Using PE-P086 Coax., Radio frequency assembly N female bulkhead to straight cut lead cable 48 inch length using PE-P086 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The N female bulkhead to straight cut lead cable 48 inch length using PE-P086 coax, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom type N to straight cut lead cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a type N bulkhead cable connection on one end and a straight cut lead cable connection on the other. Our type N to straight cut lead cable assembly has a female gender on end 1 and a sexless on end 2. PE3C9532-48 can also be known as a type N jack to straight cut lead sexless cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable's inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C9532-48 RF cable has a FEP jacket of 0.104-inch diameter. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 70% and a minimum RF shielding of 110 dB. Type N jack to straight cut lead sexless cable assembly PE3C9532-48 is built with PE-P086 which is a flexible coax type. The Pasternack flexible type N cable assembly is manufactured with type N to straight cut lead cable connectors, has a 50 Ohm impedance, and is double shielded. One connector features the solder/solder attachment method and a brass body with nickel plating, while the other has the crimp/solder attachment method. Additional dimensions, specifications and CAD drawings for this RF cable are available on our downloadable PDF datasheet. PE3C9532-48 can also be used in the other direction and will be a straight cut lead sexless to type N female bulkhead cable assembly if the opposite connectivity is required. Type N jack bulkhead to straight cut lead sexless cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality type N to straight cut lead cable assembly for quick shipment worldwide. Variations of type N and straight cut lead cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal type N to Straight Cut Lead RF cable assembly as per your requirements.

1 : $113.99
25 : $108.29
50 : $102.59
100 : $98.03

TE Connectivity

1-84953-2

TE Connectivity

1MM FPC HORZ.TOP CONT.ASSY 12P Centerline (Pitch): .039 in Centerline (Pitch): 1 mm Insertion Force Type: Zero Insertion Force (ZIF) PCB Mount Orientation: Right Angle Contact Mating Location: Top 0.039" 1 mm Zero Insertion Force (ZIF) Right Angle | Fpc Connector | Part Number: 1-84953-2 | Internal Number: 1-84953-2 | .039" | TE Connectivity
RoHS : Compliant

1,000 : $1.05
500 : $1.08
250 : $1.11
100 : $1.15
50 : $1.19
1 : $1.3

18,642

2-84953-2

TE Connectivity

1MM FPC HORZ.TOP CONT.ASSY 22P Centerline (Pitch): .039 in Centerline (Pitch): 1 mm Insertion Force Type: Zero Insertion Force (ZIF) PCB Mount Orientation: Right Angle Contact Mating Location: Top 0.039" 1 mm Zero Insertion Force (ZIF) Right Angle | Fpc Connector | Part Number: 2-84953-2 | Internal Number: 2-84953-2 | .039" | TE Connectivity
RoHS : Compliant

1,000 : $2.06
500 : $2.12
250 : $2.19
100 : $2.26
50 : $2.33
1 : $2.55

12,978

5207953-2

TE Connectivity

SCREWLOCK, ZN PLTD Connector Hardware Accessory Type: Female Screwlock Hardware Accessory Function: Latching, Locking & Retention Female Screwlock Latching, Locking & Retention | Connector Hardware | Part Number: 5207953-2 | Internal Number: 5207953-2 | TE Connectivity
RoHS : Compliant

1,000 : $0.5
500 : $0.51
250 : $0.53
100 : $0.55
50 : $0.56
1 : $0.62

8,436

794953-2

TE Connectivity

2P PM PLUG VAL-U-LOK V2 Number of Positions: 2 Connector & Housing Type: Plug Connector Product Type: Housing Termination Method to Wire & Cable: Crimp Connector System: Wire-to-Wire Wire-to-Panel Standard Rectangular Connector | 2 Plug Housing Crimp | Part Number: 794953-2 | Internal Number: 794953-2 | TE Connectivity
RoHS : Compliant

1,000 : $0.14
100 : $0.19
10 : $0.23
1 : $0.3

3,037

120953-2

TE Connectivity

TE UPM Ver Receptacle 5P HC Power PCB Connector Type: PCB Mount Receptacle PCB Mount Orientation: Vertical Connector System: Board-to-Board Board-to-Board Configuration: Perpendicular Mezzanine (Stacking) Number of Positions: 5 PCB Mount Receptacle Vertical Board-to-Board Perpendicular | PCB Header & Receptacle | Part Number: 120953-2 | Internal Number: 120953-2 | TE Connectivity
RoHS : Compliant

1,000 : $5.72
500 : $5.88
250 : $6.06
100 : $6.27
50 : $6.45
1 : $7.08

807

202D953-25-0

TE Connectivity

202D953-25-0 Body Orientation: Straight Molded Part Shape Code: 202 Lipped: Yes Material Code: 25 Material Systems Code: 25 Heat Shrink Boot | Straight 202 25 | Part Number: 202D953-25-0 | Internal Number: 806684-000 | Alias Number: 1196241-9 | TE Connectivity
RoHS : Compliant

1 : $26.25

226

222D953-25-0

TE Connectivity

222D953-25-0 Body Orientation: Right Angle Molded Part Shape Code: 222 Lipped: Yes Material Code: 25 Material Systems Code: 25 Heat Shrink Boot | Right Angle 222 25 | Part Number: 222D953-25-0 | Internal Number: 806687-000 | Alias Number: 2-1196241-9 | TE Connectivity
RoHS : Compliant

1 : $30.98

Teledyne HiRel

5962-8953202YA

Teledyne HiRel

BUS TRANSCEIVER, DUAL ASYNCHRONOUS
RoHS : Not Compliant

5962-8953201XA

Teledyne HiRel

BUS TRANSCEIVER, DUAL ASYNCHRONOUS
RoHS : Not Compliant

5962-8953202QA

Teledyne HiRel

BUS TRANSCEIVER, DUAL ASYNCHRONOUS
RoHS : Not Compliant

5962-8953202UA

Teledyne HiRel

BUS TRANSCEIVER, DUAL ASYNCHRONOUS
RoHS : Not Compliant

Vyrian

953220-2000-AR-TP

3m Electronic Products Division

Board Connector, 20 Contact(s), 2 Row(s), Female, Straight, Surface Mount Terminal, Socket

13,466

VG95328T12-10PN

Glenair Inc

MIL Series Connector, 10 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Plug

13,157

MCU08050D9532BP100

Vishay Intertechnologies

Fixed Resistor, Thin Film, 0.125W, 95300ohm, 150V, 0.1% +/-Tol, 25ppm/Cel, Surface Mount, 0805
RoHS : Compliant

12,511

1953224

Phoenix Contact

Barrier Strip Terminal Block, 8A, 1 Row(s), 1 Deck(s)
RoHS : Compliant

11,950

95329

Desco Industries

11,848

MAX9532AUB-T

Analog Devices (Maxim Integrated)

11,334

9532CD

APEM Inc

Pushbutton Switch, SPST, Momentary, 0.1A, 30VDC, Solder Lug Terminal, Panel Mount-threaded
RoHS : Compliant

11,134

0LD39532Z

Littelfuse Inc

Communication Devices
RoHS : Compliant

10,864

MAX9532AUB-V-T

Analog Devices (Maxim Integrated)

8,785

MAX9532EVKIT

Analog Devices (Maxim Integrated)

8,483

CT309532

Micron Technology, Inc

6,530

5962-8953202YA

NXP Semiconductors

Serial I/O Controller, 2 Channel(s), 0.125MBps, CMOS

6,326

FPD95320DSCG-NOPB

Texas Instruments

5,585

CT259532

Micron Technology, Inc

4,781

395326622

Molex

Modular Terminal Block, 15A, 1 Row(s), 1 Deck(s)
RoHS : Compliant

453

Win Source Electronics

PCA9532BS

Nexperia

16-bit I2C LED dimmer

219 : $1.5361
175 : $1.6
135 : $1.664
94 : $1.792
61 : $1.8561
29 : $1.984

60,000

M95320-WMN6

STMicroelectronics

64Kbit and 32Kbit Serial SPI Bus EEPROM With High Speed Clock
RoHS : Compliant

1,385 : $0.2167
1,035 : $0.2417
800 : $0.25
585 : $0.2584
375 : $0.2667
155 : $0.3251

32,000

M95320-WMN6T

STMicroelectronics

64/32/16/8 Kbit Serial SPI Bus EEPROM With High Speed Clock
RoHS : Compliant

1,385 : $0.2167
1,035 : $0.2417
800 : $0.25
585 : $0.2584
375 : $0.2667
155 : $0.3251

30,290

M95320-WMN6P

STMicroelectronics

IC EEPROM 32KBIT 10MHZ 8SO
RoHS : Compliant

1,385 : $0.2167
1,035 : $0.2417
800 : $0.25
585 : $0.2584
375 : $0.2667
155 : $0.3251

30,230

M95320-WMN6TP/P

STMicroelectronics

IC EEPROM 32KBIT 10MHZ 8SO
RoHS : Compliant

2,905 : $0.1337
2,325 : $0.1392
1,790 : $0.1448
1,245 : $0.1559
805 : $0.1614
375 : $0.1726

29,510

M95320-WMN6TP

STMicroelectronics

IC EEPROM 32KBIT 10MHZ 8SO
RoHS : Compliant

1,385 : $0.2167
1,035 : $0.2417
800 : $0.25
585 : $0.2584
375 : $0.2667
155 : $0.3251

28,840

CAT9532YI-T2

onsemi

IC LED DRVR LIN DIM 25MA 24TSSOP / LED Driver 16 Segment 550uA Supply Current 24-Pin TSSOP T/R
RoHS : Compliant

108 : $2.7955
86 : $2.9091
67 : $3.0228
47 : $3.25
30 : $3.3637
14 : $3.591

16,000

RT9532GQW

Richtek Technology Corp

IC BATT CHRGR LI-ION SGL 10WQFN
RoHS : Compliant

131 : $2.5694
98 : $2.8659
76 : $2.9646
55 : $3.0635
36 : $3.1623
15 : $3.8541

15,000

CSD19532Q5B

Texas Instruments

100 V N-Channel NexFET Power MOSFET
RoHS : Compliant

205 : $1.6449
164 : $1.7118
126 : $1.7787
88 : $1.9124
57 : $1.9793
27 : $2.113

13,876

CSD19532Q5BT

Texas Instruments

MOSFET N-CH 100V 100A VSON / Trans MOSFET N-CH Si 100V 100A 8-Pin VSON-CLIP EP T/R
RoHS : Compliant

410 : $0.8287
325 : $0.8624
250 : $0.896
175 : $0.9634
115 : $0.9971
55 : $1.0644

12,630

CAT9532HV6I-GT2

onsemi

IC LED DRVR LIN DIM 25MA 24TQFN
RoHS : Compliant

300 : $1.0091
225 : $1.1255
175 : $1.1643
125 : $1.2032
85 : $1.242
35 : $1.5136

10,000

PCA9532PW

Nexperia

LED Driver 550uA Supply Current 24-Pin TSSOP / 16-bit I2C LED dimmer

166 : $2.0341
124 : $2.2688
96 : $2.3471
70 : $2.4252
45 : $2.5035
19 : $3.0511

10,000

Wuhan P&S

M95320-WMN6TP

STMicroelectronics

32K Serial SPI EEPROM with Positive Clock Strobe
RoHS : Compliant

1 : $0.23
100 : $0.23
500 : $0.23
1,000 : $0.23

10,000

95320480ACNFMNFZCWC дистрибьютор

ссылки URL