| поискавой системы для электроныых деталей |
|
862-R4 дистрибьютор |
| дистрибьютор | номер детали | производитель | подробное описание детали | Price | Qty. BuyNow | |
![]() STMicroelectronics | TS862IDT![]() | STMicroelectronics | Rail-to-rail micropower BiCMOS dual comparator RoHS : Compliant |
| 2,941 | |
TS862IPT![]() | STMicroelectronics | Rail-to-rail micropower BiCMOS dual comparator RoHS : Compliant |
| 0 | ||
![]() Coilcraft Direct | MSS7331-862MLC | Coilcraft Inc | Power inductor, shielded, 20/30% tol, SMT, RoHS RoHS : Compliant |
| 400 | |
![]() ComSIT USA | SI8620BDBIS | AVAILABLE EU | 110 | |||
| SFH62862T | AVAILABLE EU | 770 | ||||
| SI8621ECBISR | Skyworks Solutions Inc | AVAILABLE EU | 407 | |||
| 22048622 | TE Connectivity | AVAILABLE EU | 9,260 | |||
| 78620005 | Autosplice | AVAILABLE EU | 47,661 | |||
![]() GLYN GmbH & Co. KG | SI8622EC-B-ISR | Skyworks Solutions Inc | Digital Isolator T+R NB SOIC8 REELBOX RoHS : Compliant | 2,500 | ||
| MB86295SPB-GS-JXE1 | FUJITSU Limited | GDC-CORAL P 2D/3D Dual TFT BGA 256 -40/+85øC NO | 263 | |||
| SI8622EB-B-IS | Skyworks Solutions Inc | Digital Isolator TUBE RoHS : Compliant | 46 | |||
![]() Chip 1 Exchange | 964286-2 | TE Connectivity | INSTOCK RoHS : Compliant | 81,900 | ||
| 286216010100808 | INSTOCK | 9,920 | ||||
| HR862137HE | Hanrun Electronics Co Ltd | INSTOCK | 5,465 | |||
FAN6862TY![]() | Fairchild Semiconductor Corporation | INSTOCK RoHS : Compliant | 2,737 | |||
| 1-1718628-1 | TE Connectivity | INSTOCK RoHS : Compliant | 1,689 | |||
| FDMS86255ET150 | INSTOCK | 1,598 | ||||
| FDMS86255 | INSTOCK | 720 | ||||
| 1N2862A | INSTOCK | 469 | ||||
| D80862 | INSTOCK | 197 | ||||
| 1786200 | INSTOCK | 100 | ||||
| 1852862- | Phoenix Contact | INSTOCK | 50 | |||
| PE68627NLT | INSTOCK | 49 | ||||
| 615 016 338 621 | Wurth Elektronik | INSTOCK | 44 | |||
| 2098622-1 | TE Connectivity | INSTOCK RoHS : Compliant | 40 | |||
| CSI1862 | INSTOCK | 1 | ||||
![]() Avnet Asia | FDMS86263P | onsemi | (Alt: FDMS86263P) RoHS : Compliant |
| 15,000 | |
| LCB TVSG-BXBY-7J8K-Z486-20-R18-ZKW | ams OSRAM Group | LED Single Chip Blue 470nm 50mA 2-Pin PLCC T/R (Alt: LCB TVSG-BXBY-7J8K-Z486-20-R18-ZKW) RoHS : Compliant |
| 10,000 | ||
| KW DELSS2.RA-AYBX-HM0-2686-20-R18-XX | ams OSRAM Group | (Alt: KW DELSS2.RA-AYBX-HM0-2686-20-R18-XX) RoHS : Compliant |
| 5,000 | ||
| 7-5177986-2 | TE Connectivity | (Alt: 7-5177986-2) RoHS : Compliant |
| 1,400 | ||
| 1-2386298-1 | TE Connectivity | (Alt: 1-2386298-1) RoHS : Compliant | 0 | |||
| 2-644486-2 | TE Connectivity | (Alt: 2-644486-2) RoHS : Compliant | 0 | |||
| KW DELSS2.RA-AZBY-JM0-2686-20-S-XX | ams OSRAM Group | (Alt: KW DELSS2.RA-AZBY-JM0-2686-20-S-XX) RoHS : Compliant | 0 | |||
| FDT86244 | onsemi | (Alt: FDT86244) RoHS : Compliant | 0 | |||
| 2623286200 | Qnity Laird | VPM,REC ,CF,PC,AL (Alt: 2623286200) RoHS : Compliant | 0 | |||
| KB DELSS2.12-THUH-34-2686-20-R18-MCT | ams OSRAM Group | (Alt: KB DELSS2.12-THUH-34-2686-20-R18-MCT) RoHS : Compliant | 0 | |||
| FDMS86255ET150 | onsemi | N-Channel Shielded Gate PowerTrench? MOSFET 150V, 63A, 12.4mO (Alt: FDMS86255ET150) RoHS : Compliant | 0 | |||
| F862BS334M310RV054V094 | KEMET Corporation | (Alt: F862BS334M310RV054V094) RoHS : Compliant | 0 | |||
| UB5862-15-002-C | Amphenol Corporation | (Alt: UB5862-15-002-C) RoHS : Compliant | 0 | |||
| KB DELSS2.D2-VIAY-4T5T-2686-20-S-XX | ams OSRAM Group | OOSKB DELSS2.D2-VIAY-4T5T-2686-20-S-XX Q (Alt: KB DELSS2.D2-VIAY-4T5T-2686-20-S-XX) RoHS : Compliant | 0 | |||
| LW TVSG.CB-BXCX-JKPL-Z486-20-R18-Z | ams OSRAM Group | LED Uni-Color White 9.15lm x=0.33/y=0.33 Chip LED 2-Pin PLCC T/R (Alt: LW TVSG.CB-BXCX-JKPL-Z486-20-R18-Z) RoHS : Compliant | 0 | |||
![]() Avnet Silica | FDMC86244 | onsemi | NChannel Power Trench MOSFET 150V 94a 134mO (Alt: FDMC86244) RoHS : Compliant | 54,000 | ||
| AL8862FF-7 | Diodes Incorporated | LED Driver DC DC 1 MHz 5 V to 60 V 1 A 1 Output 40 C to 105 C (Alt: AL8862FF-7) RoHS : Compliant | 6,000 | |||
| PAM8620TR | Diodes Incorporated | (Alt: PAM8620TR) RoHS : Compliant | 3,000 | |||
| FDMC86262P | onsemi | PChannel PowerTrench MOSFET 150 V 2 A 307 mO (Alt: FDMC86262P) RoHS : Compliant | 3,000 | |||
| C16862_DAISY-2X2-WW | LEDIL | LED MultiLens Square 4 Position PMMA Clear (Alt: C16862_DAISY-2X2-WW) RoHS : Compliant | 880 | |||
PIC18LF8621-I/PT![]() | Microchip Technology Inc | (Alt: PIC18LF8621-I/PT) RoHS : Compliant | 357 | |||
| FDS86252 | onsemi | NChannel Power Trench MOSFET 150V 45A 55mO (Alt: FDS86252) RoHS : Compliant | 0 | |||
| FDT86246 | onsemi | NChannel Power Trench MOSFET 150V 2A 236mO (Alt: FDT86246) RoHS : Compliant | 0 | |||
| FDT86244 | onsemi | NChannel Power Trench MOSFET 150V 28A 128mO (Alt: FDT86244) RoHS : Compliant | 0 | |||
| FDMA86251 | onsemi | Single NChannel PowerTrench MOSFET 150V 24A 175mO (Alt: FDMA86251) RoHS : Compliant | 0 | |||
| MXL86281S-ABE-R | MaxLinear Inc | 16Port Ethernet Switch 314 V to 346 V 277 Pins FCLBGA (Alt: MXL86281S-ABE-R) RoHS : Compliant | 0 | |||
| MXL86281S-EVK-1 | MaxLinear Inc | 25 GIAGABIT ETHERNET SWITCH WITH 16 PHY (Alt: MXL86281S-EVK-1) RoHS : Compliant | 0 | |||
| MXL86282S-ABE-R | MaxLinear Inc | 10Port Ethernet Switch 314 V to 346 V 277 Pins FCLBGA (Alt: MXL86282S-ABE-R) RoHS : Compliant | 0 | |||
PIC18F8627-I/PT![]() | Microchip Technology Inc | 8 Bit MCU Flash PIC18 Family PIC18F86xx Series Microcontrollers PIC18 40 MHz 96 KB 80 Pins (Alt: PIC18F8627-I/PT) RoHS : Compliant | 0 | |||
| MXL86252L-ABB-R | MaxLinear Inc | 7Port Ethernet Switch 314 V to 346 V 277 Pins FCLBGA (Alt: MXL86252L-ABB-R) RoHS : Compliant | 0 | |||
![]() DB Roberts | 5621-68-62 | Seastrom Mfg |
| 314 | ||
| 1461862 | Essentra Components | 0 | ||||
| 8625-3124-SS | RAF Electronic Hardware | 0 | ||||
| H8624 | Heyco | HPASC 1-1/2 NPT-90-42MM BLK | 0 | |||
| AEKS8-624-150 | PennEngineering (PEM) | 0 | ||||
| AEKS8-624-312 | PennEngineering (PEM) | 3/8-24 | 0 | |||
| AELS8-624-150W | PennEngineering (PEM) | 3/8-24 | 0 | |||
| AELS8-624-312W | PennEngineering (PEM) | 3/8-24 | 0 | |||
| S074862 | Spiralock | M3.5X0.5 SPL DBL LEAD 2SP P | 0 | |||
| H8620F | Heyco | HPASC 1 NPT-90-34MM V-0 BLK | 0 | |||
| H8622 | Heyco | 0 | ||||
| 0862 | Essentra Components | HANDLE, GRAB - 122MM LENGTH - | 0 | |||
| 498629 | Essentra Components | 0 | ||||
| 11862 | Heyco | MFSM3-M15 NATURAL | 0 | |||
| AELS8-624-150BW | PennEngineering (PEM) | 3/8-24 | 0 | |||
![]() Neutron USA | N286-25G-SRS-G | Tripp Lite | 25GBASE-SR SFP28 TRANSCEIVER 25G 850NM RoHS : Compliant |
| 588 | |
| FN286-2-06 | Schaffner | AC Power Entry Modules 2A 250VAC 50/60HZ FAST-ON / 2FUSES RoHS : Compliant |
| 50 | ||
| USB-5862-AE | Advantech Co Ltd | 16-ch IDI & 16-ch Relay USB3.0 I/O module |
| 30 | ||
| 54862BE | ABB Low Voltage Products and Systems | Terminal Connector Rectangular Lug, Grounding 2/0 AWG 1/2 Stud |
| 10 | ||
| 86-201 | Daniels Manufacturing Corporation (DMC) | Crimpers / Crimping Tools 86 Positioner |
| 2 | ||
| AXG97862 | Axiom Manufacturing | AXIOM 70FT CAT6 BENDNFLEX CAB (YELLOW) |
| 0 | ||
| 1668629 | Phoenix Contact | Sensor/Actuator Cable, R/A M12 M 4P to Str M12 F 4P, 4wire 3m, PUR b-g, SAC-4P-M12MR/3,0-PUR/M12FS RoHS : Compliant |
| 0 | ||
| SM2862-5252 | Sanyo-Denki Co Ltd | Stepper Motors Stepping Motor, Single Half Inch Shaft, 86mm sq., 1.8 /Step, Bipolar Drive, 6.4N m, 100W, 0.36 ohm, 2.8mH, 96.5mm Motor Length, IP40 Rated |
| 0 | ||
| 1618621 | Phoenix Contact | Circular Metric Connectors ST-5ES1N8A8K02S RoHS : Compliant |
| 0 | ||
1862026![]() | Phoenix Contact | Fixed Terminal Blocks SPTAF 1/11-3,5-IL RoHS : Compliant |
| 0 | ||
| 1862107 | Phoenix Contact | Fixed Terminal Blocks SPTAF 1/ 8-3,5-EL RoHS : Compliant |
| 0 | ||
1862233![]() | Phoenix Contact | Fixed Terminal Blocks SPTAF 1/13-3,5-EL RoHS : Compliant |
| 0 | ||
| 1862314 | Phoenix Contact | Fixed Terminal Blocks SPTAF 1/ 6-5,0-IL RoHS : Compliant |
| 0 | ||
1862521![]() | Phoenix Contact | Fixed Terminal Blocks SPTAF 1/13-5,0-EL RoHS : Compliant |
| 0 | ||
| VPS28-6250 | Triad Magnetics | Power Transformers 28V 6.25A TRF RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3W07862LF-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-195, RF Cable Type: LMR-195, RF Cable Impedance: 50 Ohm, Length: 18 inches. Reverse Polarity TNC Male to N Female Low Loss Cable 18 Inch Length Using LMR-195 Coax, LF Solder., Radio frequency assembly reverse polarity TNC male to N female low loss cable 18 inch length using LMR-195 coax, LF solder from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. Reverse polarity TNC male to N female low loss cable 18 inch length using LMR-195 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with reverse polarity TNC cable connection on one end and type N cable connection on the other. Our low loss reverse polarity TNC to type N cable assemblies have a male gender on end 1 and female on end 2. This reverse polarity TNC to N type cable is a male to female coax assembly, PE3W07862LF-18, can also be known as a low loss reverse polarity TNC plug to type N jack cable assembly and will be shipped same-day as it is purchased. Reverse polarity TNC plug to type N jack cable assembly PE3W07862LF-18 is built with LMR-195 which is a flexible coax type. The Pasternack flexible reverse polarity TNC cable assembly is manufactured with TNC to type N cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 10 GHz maximum frequency reverse polarity TNC male to type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W07862LF-18 can also be used in the other direction and will be N type female to reverse polarity TNC male cable assembly if the opposite connectivity is required. Low loss TNC reverse polarity plug to type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to type N cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity TNC male to N female low loss cable 18 inch length using LMR-195 coax, LF solder. |
| 960 | |
| PE3FCA186-25M | Pasternack Enterprises | Key Specifications, Mode: Multimode, Multimode Class: OM1, Fiber Diameter: 62.5/125, Cable Assembly Color: Orange, Return Loss Min: 30 dB, Insertion Loss Max: 0.3 dB, Connector 1 Series: LC, Connector 1 Polish Type: UPC, Connector 2 Series: SC, Connector 2 Polish Type: UPC, Jacket Burn Rating: LSZH, Cable Diameter: 4.5 mm, Max Crush Resistance, Short Term (N/100mm): 1,000, Max Crush Resistance, Long Term (N/100mm): 300, Max Operating Temperature: 70 deg C, Min Operating Temperature: -20 deg C, Ingress Protection (IP) Rating: Non-Rated. 4-Fiber LC UPC to SC UPC, OM1 Multimode Distribution Cable, 4.5mm LSZH, 2.0mm breakout, Orange-25M. Pasternack’s PE3FCA186-25M fiber optic breakout cord is a robust and versatile fiber optic cable assembly designed for high-performance data transmission in various environments. This 25-meter long 4-fiber cable assembly is equipped with LC/UPC to SC/UPC connectors. Our orange fiber optic cable has an LSZH (low smoke zero halogen) rated PE jacket that ensures compliance with fire and safety standards. With an operating temperature range of -20 to 70 degrees C and a storage temperature range of -40 to 70 degrees C, this cable provides reliable performance across diverse conditions. This distribution cable assembly comes with a multimode OM1 fiber that provides 100 Mb Ethernet support and 10 Gb Ethernet up to 33 meters with a 62.5/125µm core size and an LED light source. The fiber optic jumper from Pasternack is suitable for applications such as data centers, passive optical networks (PON), local area networks (LAN), enterprise networking, storage and cloud based services, AI data storage and communications, headend termination to a fiber backbone and terminations of data center fiber rack system. Additional dimensions, specifications, and CAD drawings for this 4-strand fiber optic breakout cord component can be found on its downloadable PDF datasheet. This PE3FCA186-25M fiber optic cable with a 4.5 mm cable diameter and 45 mm bend radius offers flexible installation options. Pasternack has one of the largest in-stock selections of LC/UPC to SC/UPC fiber optic breakout cords for international and domestic orders. Make your online purchase right now to take advantage of our same-business-day shipping. Our fiber optic breakout assembly is engineered for low attenuation and high durability, and the tight buffered fiber with aramid yarn reinforcement ensures exceptional performance in demanding network environments. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal OM1 multimode fiber optic cable that meets your requirements. |
| 133 | ||
| PE3C6086-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 75 Ohm, Connector Series 2: TNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 75 Ohm, RF Cable Part Number: RG59B/U, RF Cable Type: RG59, RF Cable Impedance: 75 Ohm, Length: 24 inches. 75 Ohm Mini SMB Plug to 75 Ohm TNC Male Cable 24 Inch Length Using 75 Ohm RG59 Coax., Radio frequency assembly 75 Ohm mini SMB plug to 75 Ohm TNC male cable 24 inch length using 75 Ohm RG59 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 75 Ohm mini SMB plug to 75 Ohm TNC male cable 24 inch length using 75 Ohm RG59 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom mini SMB to TNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with mini SMB cable connection on one end and TNC cable connection on the other. Our mini SMB to TNC cable assemblies have a plug gender on end 1 and male on end 2. This mini SMB to TNC cable is a plug to male coax assembly, PE3C6086-24, can also be known as a mini SMB male to TNC plug cable assembly and will be shipped same-day as it is purchased. Mini SMB male to TNC plug cable assembly PE3C6086-24 is built with RG59 which is a flexible coax type. The Pasternack flexible Mini SMB cable assembly is manufactured with mini SMB to TNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 1 GHz maximum frequency mini SMB plug to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6086-24 can also be used in the other direction and will be TNC male to mini SMB plug cable assembly if the opposite connectivity is required. Mini SMB male to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality mini SMB to TNC cable assembly for quick shipment worldwide. Variations of mini SMB cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm mini SMB plug to 75 Ohm TNC male cable 24 inch length using 75 Ohm RG59 coax. |
| 10 | ||
| PE9862B-10 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-229, Frequency, Min: 3.3 GHz, Frequency, Max: 4.9 GHz. WR-229 Standard Gain Horn Antenna Operating From 3.3 GHz to 4.9 GHz, 10 dBi Nominal Gain, CMR-229 Flange, ProLine. Pasternack’s PE9862B-10 WR-229 waveguide horn is also known as a waveguide horn antenna. This WR-229 standard gain horn waveguide antenna has a nominal gain of 10 dBi. Our waveguide horn can operate at frequencies ranging from 3.3 to 4.9 GHz. The standard gain horn antenna with linear polarization has a typical VSWR of 1.5:1 and is suitable for test and measurement industries. This 10 dBi waveguide horn from Pasternack has an overall length of 6 inches, a width of 3.44 inches, and a weight of 0.05 lbs. Our antenna comes with a cmr-229 flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-229 standard gain horn antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-229 waveguide horn antenna with 10 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 6 | ||
| PE3C10786-24 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: Mini SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 24 inches. 1.85mm Male to Mini SMP Female Cable 24 Inch Length Using PE-SR405FLJ Coax., Pasternack’s PE3C10786-24 1.85mm male to mini SMP female RF cable assembly using PE-SR405FLJ coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to mini SMP female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to mini SMP cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a mini SMP cable connection on the other. Our 1.85mm to mini SMP cable assembly has a male gender on end 1 and a female on end 2. PE3C10786-24 can also be known as a 1.85mm plug to mini SMP jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10786-24 RF cable has an FEP jacket of 0.105-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -55 to 125 degrees C. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. Our 1.85mm male to mini SMP female cable has a maximum VSWR of 1.4:1. This PE3C10786-24 1.85mm plug to mini SMP jack cable assembly is built with PE-SR405FLJ, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to mini SMP cable connectors, has a 50 Ohm impedance, and is single shielded. Both the connectors have a solder attachment method and a beryllium copper body. Additional dimensions, specifications, and CAD drawings for this 24-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10786-24 can also be used in the other direction and will be a mini SMP female to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to mini SMP jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to mini SMP cable assembly for quick shipment worldwide. Variations of 1.85mm and mini SMP cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to mini SMP RF cable assembly as per your requirements. |
| 2 | ||
| PE3W08620 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. Reverse Polarity SMA Male Right Angle to TNC Female Cable Using RG223 Coax. PE3W08620 is a reverse polarity SMA male right angle to TNC female cable using RG223 coax. This Pasternack reverse polarity SMA male right angle to TNC female cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm TNC for connector 2. SMA right angle to TNC coaxial cable assembly uses 90 degree right angle coax cable connector. Our reverse polarity male SMA right angle to female TNC cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08620 SMA reverse polarity male right angle to TNC female cable assembly is constructed with RG223 coax. | 0 | |||
| PE9862/NF-10 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-229, Gain Min: 10, Beam Width, 3dB V: 58.6, Beam Width, 3dB H: 51.9, Frequency, Min: 3.3 GHz, Frequency, Max: 4.9 GHz. WR-229 Waveguide Standard Gain Horn Antenna Operating From 3.3 GHz to 4.9 GHz With a Nominal 10 dB Gain N Female Input. The PE9862/NF-10 standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-229 input and a waveguide to coaxial transition adapter. Our WR-229 waveguide antenna features a type N female connector. This single-band directional antenna comes with a flange. Our WR-229 standard gain horn antenna with a type N female input has a minimum frequency of 3.3 GHz and a maximum frequency of 4.9 GHz. Pasternack’s PE9862/NF-10 waveguide horn antenna has a typical gain of 10 dB. Our waveguide antenna has a typical vertical beam width of 58.6 degrees and a horizontal beam width of 51.9 degrees at 3 dB. This antenna has a length of 10 inches, a width of 6 inches, and a weight of 0.96 lbs. This WR-229 waveguide horn antenna with 10 dB gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this single-band directional antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a type N female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. |
| 0 | ||
| PE33862 | Pasternack Enterprises | 0 | ||||
| PE3W18628/HS | Pasternack Enterprises | Key Specifications, Connector 1 Series: TNC, Connector 1 Gender: Plug, Connector 1 Polarity: Reverse Polarity, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-240, RF Cable Type: LMR-240, RF Cable Impedance: 50 Ohm. Reverse Polarity TNC Plug to SMA Male Right Angle Low Loss Cable Using LMR-240 Coax with HeatShrink., Radio frequency assembly reverse polarity TNC plug to SMA male right angle low loss cable using LMR-240 coax with heatshrink from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The reverse polarity TNC plug to SMA male right angle low loss cable using LMR-240 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom TNC to SMA cable assembly orders will ship the same business day as well. Pasternack RF coax low loss cable assembly is built with a reverse polarity TNC cable connection on one end and a right angle SMA cable connection on the other. Our low loss reverse polarity TNC to right angle SMA cable assembly has a plug gender on end 1 and a male on end 2. PE3W18628/HS can also be known as a low loss reverse polarity TNC male to right angle SMA plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.5-inch diameter has copper as the cable's inner conducting material and PE (F) dielectric type. This cable assembly employs durable and flexible materials, and with a 2.5-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3W18628/HS RF cable has a PE jacket of 0.240-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 85 degrees C. The flexible RF cable has a between series connection. This cable assembly has a typical propagation velocity of 84% and a minimum RF shielding of 90 dB. Our TNC plug to right angle SMA male cable has a maximum VSWR of 1.4:1. Reverse polarity TNC male to SMA plug cable assembly PE3W18628/HS is built with LMR-240 which is a flexible coax type. The Pasternack flexible reverse polarity TNC cable assembly is manufactured with TNC to right angle SMA cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a crimp/non-solder contact attachment method and a brass body with tri-metal plating. Additional dimensions, specifications and CAD drawings for this low loss RF cable are available on our downloadable PDF datasheet. PE3W18628/HS can also be used in the other direction and will be a right angle SMA male to reverse polarity TNC plug cable assembly if the opposite connectivity is required. Low loss TNC reverse polarity male to SMA right angle plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality TNC to SMA cable assembly for quick shipment worldwide. Variations of TNC and SMA cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal TNC to SMA low loss RF cable assembly as per your requirements. LMR® is a registered trademark of Times Microwave Systems. | 0 | |||
| PE38628LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-C240, RF Cable Type: PE-C240, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Cable Using PE-C240 Coax, LF Solder. PE38628LF is a SMA male to SMA male cable using PE-C240 coax. This Pasternack SMA male to SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE38628LF SMA male to SMA male cable assembly is constructed with PE-C240 coax. | 0 | |||
| PE3C7862-100CM | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.2-5, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 39.37 inches. 2.2-5 Male Right Angle to 2.2-5 Female Bulkhead Low PIM Cable 100 Cm Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 2.2-5 male right angle to 2.2-5 female bulkhead low PIM cable 100 cm length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.2-5 male right angle to 2.2-5 female bulkhead low PIM cable 100 cm length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.2-5 to 2.2-5 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 2.2-5 cable connection on one end and 2.2-5 bulkhead cable connection on the other. Our low PIM right angle 2.2-5 to 2.2-5 cable assemblies have a male gender on end 1 and female on end 2. This 2.2-5 to 2.2-5 cable is a male to female coax assembly, PE3C7862-100CM, can also be known as a low PIM right angle 2.2-5 plug to 2.2-5 jack cable assembly and will be shipped same-day as it is purchased. 2.2-5 plug to 2.2-5 jack cable assembly PE3C7862-100CM is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with right angle 2.2-5 to 2.2-5 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 2.2-5 right angle male to 2.2-5 female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7862-100CM can also be used in the other direction and will be 2.2-5 female bulkhead to right angle 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 right angle plug to 2.2-5 jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to 2.2-5 cable assembly for quick shipment worldwide. Variations of 2.2-5 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.2-5 male right angle to 2.2-5 female bulkhead low PIM cable 100 cm length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3C7862-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.2-5, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 12 inches. 2.2-5 Male Right Angle to 2.2-5 Female Bulkhead Low PIM Cable 12 Inch Length Using 1/4 inch Superflexible Coax., Radio frequency assembly 2.2-5 male right angle to 2.2-5 female bulkhead low PIM cable 12 inch length using 1/4 inch superflexible coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. 2.2-5 male right angle to 2.2-5 female bulkhead low PIM cable 12 inch length using 1/4 inch superflexible coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 2.2-5 to 2.2-5 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with right angle 2.2-5 cable connection on one end and 2.2-5 bulkhead cable connection on the other. Our low PIM right angle 2.2-5 to 2.2-5 cable assemblies have a male gender on end 1 and female on end 2. This 2.2-5 to 2.2-5 cable is a male to female coax assembly, PE3C7862-12, can also be known as a low PIM right angle 2.2-5 plug to 2.2-5 jack cable assembly and will be shipped same-day as it is purchased. 2.2-5 plug to 2.2-5 jack cable assembly PE3C7862-12 is built with 1/4" superflexible which is a corrugated coax type. The Pasternack low passive intermodulation corrugated 2.2-5 cable assembly is manufactured with right angle 2.2-5 to 2.2-5 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency low PIM 2.2-5 right angle male to 2.2-5 female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7862-12 can also be used in the other direction and will be 2.2-5 female bulkhead to right angle 2.2-5 male cable assembly if the opposite connectivity is required. Low PIM 2.2-5 right angle plug to 2.2-5 jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 2.2-5 to 2.2-5 cable assembly for quick shipment worldwide. Variations of 2.2-5 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 2.2-5 male right angle to 2.2-5 female bulkhead low PIM cable 12 inch length using 1/4 inch superflexible coax. |
| 0 | ||
| PE3W00862LF-60 | Pasternack Enterprises | Key Specifications, Connector 1 Series: N, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Tri-Metal, RF Cable Part Number: LMR-400, RF Cable Type: LMR-400, RF Cable Impedance: 50 Ohm, Length, Max: 60 inches. N Male to TNC Male Low Loss Cable 60 Inch Length Using LMR-400 Coax, LF Solder., Radio frequency assembly N male to TNC male low loss cable 60 inch length using LMR-400 coax, LF solder from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The N male to TNC male low loss cable 60 inch length using LMR-400 coax, LF solder, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom type N to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with N type cable connection on one end and TNC cable connection on the other. Our low loss type N to TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W00862LF-60 can also be known as a low loss type N plug to TNC plug cable assembly and will be shipped same-day as it is purchased. Type N plug to TNC plug cable assembly PE3W00862LF-60 is built with LMR-400 which is a flexible coax type. The Pasternack flexible N cable assembly is manufactured with N type to TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency type N male to TNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W00862LF-60 can also be used in the other direction and will be TNC male to N type male cable assembly if the opposite connectivity is required. Low loss type N plug to TNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality type N to TNC cable assembly for quick shipment worldwide. Variations of N type cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this N male to TNC male low loss cable 60 inch length using LMR-400 coax, LF solder. |
| 0 | ||
| PE38626 | Pasternack Enterprises | 0 | ||||
| PE34862LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: FME, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: BNC, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm, Length: 48 inches. FME Jack to BNC Male Cable 48 Inch Length Using RG58 Coax, RoHS., Radio frequency assembly FME jack to BNC male cable 48 inch length using RG58 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. FME jack to BNC male cable 48 inch length using RG58 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FME to BNC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FME cable connection on one end and BNC cable connection on the other. Our FME to BNC cable assemblies have a jack gender on end 1 and male on end 2. This FME to BNC cable is a jack to male coax assembly, PE34862LF-48, can also be known as a FME female to BNC plug cable assembly and will be shipped same-day as it is purchased. FME female to BNC plug cable assembly PE34862LF-48 is built with RG58 which is a flexible coax type. The Pasternack flexible FME cable assembly is manufactured with FME to BNC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this FME jack to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34862LF-48 can also be used in the other direction and will be BNC male to FME jack cable assembly if the opposite connectivity is required. FME female to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FME to BNC cable assembly for quick shipment worldwide. Variations of FME cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this FME jack to BNC male cable 48 inch length using RG58 coax, RoHS. |
| 0 | ||
![]() Vyrian | FN286-2-06 | Schaffner Holding Ag | 10,200 | |||
| PEX8624-BB50RBCG | Broadcom Limited | PCI Bus Controller, CMOS, PBGA324 RoHS : Compliant | 4,450 | |||
| V8BAAD0C-A9B86-200 | Carling Technologies | Rocker Switch, SPDT, (on)-off-(on), Momentary, 15A, 28VDC, Quick Connect Terminal, Rocker Actuator, Panel Mount RoHS : Compliant | 4,200 | |||
V62/08620-03YE![]() | Texas Instruments | Operational Amplifier, 4 Func, 2400uV Offset-Max, BIPolar, PDSO16 RoHS : Compliant | 3,800 | |||
DS8627N-3![]() | Texas Instruments | Prescaler | 1,950 | |||
SN54BCT29862BFK![]() | Texas Instruments | Bus Transceiver, BCT/FBT Series, 1-Func, 10-Bit, Inverted Output, CMOS, CQCC28 | 980 | |||
SN54BCT29862BDW![]() | Texas Instruments | Bus Transceiver, BCT/FBT Series, 1-Func, 10-Bit, Inverted Output, CMOS, PDSO24 | 740 | |||
5962-8862601EA![]() | Texas Instruments | Multiplexer, ALS Series, 4-Func, 2 Line Input, 1 Line Output, Inverted Output, TTL, CDIP16 RoHS : Not Compliant | 550 | |||
TPS658623ZGUT![]() | Texas Instruments | Power Supply Support Circuit, Adjustable, 14 Channel, PBGA169 RoHS : Compliant | 480 | |||
UC3862DWTRG4![]() | Texas Instruments | Switching Controller, Voltage-mode, 1.5A, 1000kHz Switching Freq-Max, BIPolar, PDSO16 RoHS : Compliant | 470 | |||
TPS78628KTTTG3![]() | Texas Instruments | Fixed Positive LDO Regulator, 2.8V, 0.58V Dropout, BICMOS, PSSO5 RoHS : Compliant | 420 | |||
| 5962-01-386-2634 | Analog Devices Inc | DPDT, 1 Func, CMOS, PDIP14 RoHS : Not Compliant | 370 | |||
| 586-2701-203F | Dialight | Single Color LED, Red, Tinted, T-3 1/4, 10.7mm RoHS : Compliant | 280 | |||
| FJ8071504786205S RMAV | Intel Corporation | 83 | ||||
UC2862Q![]() | Texas Instruments | Switching Controller, Voltage-mode, 1A, 1000kHz Switching Freq-Max, BIPolar, PQCC20 RoHS : Not Compliant | 68 | |||
![]() Waytek, Inc. | 131862-91A | General Cable Technologies Corporation | 18GA GXL Red Cross-Link Automotive Wire XLPE -51C to 125C |
| 198,400 | |
| 148628-91 | General Cable Technologies Corporation | 10GA SXL Green Cross-Link Automotive Wire XLPE -51C to 125C |
| 3,750 | ||
| 7100163862 | 3M | 12-10 GA #8 Spade Terminal Insulated Vinyl |
| 2,535 | ||
| SP2778/6228 CT | Sargent Quality Tools | Battery Terminal Diamond Crimp Tool 1 thru 8 AWG |
| 6 | ||
![]() Wuhan P&S | FDN86246 | onsemi | 150V��1.6A��261m��,N-Channel Power MOSFET RoHS : Compliant |
| 21,000 | |
| FDMS86255 | onsemi | 150V,62A,12.4m��,N-Channel Power MOSFET RoHS : Compliant |
| 6,000 |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |