| поискавой системы для электроныых деталей |
|
806L-SH2-R дистрибьютор |
| дистрибьютор | номер детали | производитель | подробное описание детали | Price | Qty. BuyNow | |
![]() TME | 77311-818-06LF | Amphenol Communications Solutions | Connector: pin strips; pin header; male; data; PIN: 6; THT; BERGSTIK RoHS : Compliant |
| 5,250 | |
| TSW-108-06-L-S | Samtec Inc | Connector: pin strips; male; data; PIN: 8; THT; TSW; straight; 2.54mm RoHS : Compliant |
| 1,498 | ||
| 77315-418-06LF | Amphenol Corporation | Connector: pin strips; male; data; PIN: 6; soldering; BERGSTIK |
| 1,384 | ||
| 98414-G08-06LF | Amphenol Corporation | Connector: wire-board; Minitek; male; data; PIN: 6; shrouded; 2mm |
| 947 | ||
| 75844-118-06LF | Amphenol Corporation | Connector: pin strips; male; data; PIN: 6; soldering; 5A; 110V |
| 870 | ||
| 87606-806LF | Amphenol Communications Solutions | Connector: PCB to PCB; Dubox®; socket; female; data; 2A; PIN: 12 RoHS : Compliant |
| 430 | ||
| 77313-118-06LF | Amphenol Communications Solutions | Connector: pin strips; pin header; male; data; PIN: 6; THT; BERGSTIK RoHS : Compliant |
| 395 | ||
| MTMM-108-06-L-S-267-002 | Samtec Inc | Connector: pin strips; MTMM; male; data; 3A; PIN: 8; 2mm; gold-plated RoHS : Compliant |
| 185 | ||
| AMSRB1-7806LPZ | Aimtec | Converter: DC/DC; 15W; Uin: 10÷36VDC; Uout: 6.5VDC; Iout: 1A; SIP3 RoHS : Compliant |
| 43 | ||
| 1206W4F806LT5E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 806mΩ; SMD; 1206; 250mW; ±1%; 200V; -55÷125°C |
| 0 | ||
| AMSRU-7806LEZ | Aimtec | Converter: DC/DC; 3.25W; Uin: 9÷90VDC; Uout: 6.5VDC; Iout: 500mA RoHS : Compliant |
| 0 | ||
| 77311-118-06LF | Amphenol Communications Solutions | Connector: pin strips; pin header; male; data; PIN: 6; THT; BERGSTIK RoHS : Compliant |
| 0 | ||
| 0805W8F806LT5E | Royal Electronic Factory (Thailand) Co Ltd | Resistor: thick film; 806mΩ; SMD; 0805; 125mW; ±1%; 150V; -55÷125°C |
| 0 | ||
| TMM-108-06-L-D-SM-A-P-TR | Samtec Inc | Connector: pin strips; pin header; male; data; PIN: 16; vertical RoHS : Compliant |
| 0 | ||
| LC1D806LE7 | Schneider Electric | Contactor: 3-pole; NO x3; Auxiliary contacts: NO + NC; 208VAC; 80A RoHS : Compliant |
| 0 | ||
![]() Avnet Americas | GC806LN7 | Amphenol Corporation | - Bulk (Alt: GC806LN7) RoHS : Not Compliant | 10 | ||
| GC806LN4 | Amphenol Corporation | - Bulk (Alt: GC806LN4) RoHS : Not Compliant | 6 | |||
| MTMM-108-06-L-S-175 | Samtec Inc | Pin Header, Board-to-Board, Wire-to-Board, 1 Rows, 8 Contacts, Through Hole, MTMM Series - Bulk (Alt: MTMM-108-06-L-S-175) RoHS : Compliant |
| 0 | ||
| MTLW-108-06-L-S-145 | Samtec Inc | Pin Header, Board-to-Board, 1 Rows, 8 Contacts, Through Hole, MTLW Series, Unshrouded, Straight - Bulk (Alt: MTLW-108-06-L-S-145) RoHS : Compliant |
| 0 | ||
| ZSS-118-06-L-D-1040 | Samtec Inc | - Bulk (Alt: ZSS-118-06-L-D-1040) RoHS : Compliant |
| 0 | ||
| 87606-806LF | Amphenol Corporation | - Rail/Tube (Alt: 87606-806LF) RoHS : Compliant |
| 0 | ||
| 77313-118-06LF | Amphenol Corporation | - Bag (Alt: 77313-118-06LF) RoHS : Compliant |
| 0 | ||
| PE1206FRF070R806L | YAGEO Corporation | SMD Current Sense Resistor, 0.806 ohm, PE Series, 1206 [3216 Metric], 250 mW, ? 1%, ? 100ppm/?C - Tape and Reel (Alt: PE1206FRF070R806L) RoHS : Compliant |
| 0 | ||
| TW-08-06-L-D-390-093 | Samtec Inc | - Bulk (Alt: TW-08-06-L-D-390-093) RoHS : Compliant |
| 0 | ||
| TW-08-06-L-D-395-SM-A-P | Samtec Inc | - Rail/Tube (Alt: TW-08-06-L-D-395-SM-A-P) RoHS : Compliant |
| 0 | ||
| TW-08-06-L-D-430-SM-A-P | Samtec Inc | Board Stackers & Spacers, Pin Header, 10.92 mm, 16 Contacts, Solder, 2 Rows, 2 mm, TW Series - Rail/Tube (Alt: TW-08-06-L-D-430-SM-A-P) RoHS : Compliant |
| 0 | ||
| QTE-028-06-L-D-DP-A-K | Samtec Inc | - Trays (Alt: QTE-028-06-L-D-DP-A-K) RoHS : Compliant |
| 0 | ||
| TW-08-06-L-D-415-100 | Samtec Inc | - Bulk (Alt: TW-08-06-L-D-415-100) RoHS : Compliant |
| 0 | ||
| TW-08-06-L-D-430-SM-A | Samtec Inc | Board Stackers & Spacers, Pin Header, 10.92 mm, 16 Contacts, Solder, 2 Rows, 2 mm, TW Series - Rail/Tube (Alt: TW-08-06-L-D-430-SM-A) RoHS : Compliant |
| 0 | ||
| TW-08-06-L-D-435-100 | Samtec Inc | - Bulk (Alt: TW-08-06-L-D-435-100) RoHS : Compliant |
| 0 | ||
![]() Newark | MTMM-108-06-L-S-235 | Samtec Inc | Pin Header, Mtmm-108-06-L-S-235; |Samtec, Inc. MTMM-108-06-L-S-235 RoHS : Compliant |
| 688 | |
| MTMM-108-06-L-S-175 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 8Pos; |Samtec, Inc. MTMM-108-06-L-S-175 RoHS : Compliant |
| 660 | ||
| MTMM-108-06-L-S-240 | Samtec Inc | Pin Header, Mtmm-108-06-L-S-240; |Samtec, Inc. MTMM-108-06-L-S-240 RoHS : Compliant |
| 660 | ||
| MTMM-108-06-L-S-090 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 8Pos; |Samtec, Inc. MTMM-108-06-L-S-090 RoHS : Compliant |
| 660 | ||
| MTMM-108-06-L-S-280 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 8Pos; |Samtec, Inc. MTMM-108-06-L-S-280 RoHS : Compliant |
| 660 | ||
| HTSW-108-06-L-D | Samtec Inc | Header, 2.54Mm, Vertical Tht, 16Way; |Samtec, Inc. HTSW-108-06-L-D RoHS : Compliant |
| 545 | ||
| MTMM-108-06-L-D-220 | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 16Pos; |Samtec, Inc. MTMM-108-06-L-D-220 RoHS : Compliant |
| 516 | ||
| TMM-108-06-LM-D-SM | Samtec Inc | Hdr, Brd-To-Brd, 2Mm, 16Pos; |Samtec, Inc. TMM-108-06-LM-D-SM RoHS : Compliant |
| 457 | ||
| TSW-128-06-L-D | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 56Pos; |Samtec, Inc. TSW-128-06-L-D RoHS : Compliant |
| 429 | ||
| MTLW-108-06-L-D-125 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 16Pos; |Samtec, Inc. MTLW-108-06-L-D-125 RoHS : Compliant |
| 284 | ||
| HMTSW-108-06-L-D-110 | Samtec Inc | Hdr, Brd-To-Brd, 2.54Mm, 16Pos; |Samtec, Inc. HMTSW-108-06-L-D-110 RoHS : Compliant |
| 272 | ||
| TSW-138-06-L-S | Samtec Inc | Header, 2.54Mm, Tht Vert, 38Way; |Samtec, Inc. TSW-138-06-L-S RoHS : Compliant |
| 243 | ||
| ZST-108-06-L-D-1040 | Samtec Inc | Stacking Board Connector, Zst Series; |Samtec, Inc. ZST-108-06-L-D-1040 RoHS : Compliant |
| 153 | ||
| ZSS-108-06-L-D-1040 | Samtec Inc | Stacking Board Connector; |Samtec, Inc. ZSS-108-06-L-D-1040 RoHS : Compliant |
| 116 | ||
| ZSS-118-06-L-D-1040 | Samtec Inc | Stacking Board Connector; |Samtec, Inc. ZSS-118-06-L-D-1040 RoHS : Compliant |
| 82 | ||
![]() RS | 0806 03 L1 300 5M (0806 ... L1 3...) | Lutronic Holdings | CABLEEND1, M8, FEMALE, ANGLED, A-CODED, LEDL1, CABLEEND2, BLUNTCUT |
| 10 | |
| 0806 03 L1 001 5M (0806 ... L1 0...) | Lutronic Holdings | CABLEEND1, M8, FEMALE, ANGLED, A-CODED, LEDL1, CABLEEND2, BLUNTCUT |
| 10 | ||
| 0806 03 L1 001 2M (0806 ... L1 0...) | Lutronic Holdings | CABLEEND1, M8, FEMALE, ANGLED, A-CODED, LEDL1, CABLEEND2, BLUNTCUT |
| 10 | ||
| 0806 03 L1 300 2M (0806 ... L1 3...) | Lutronic Holdings | CABLEEND1, M8, FEMALE, ANGLED, A-CODED, LEDL1, CABLEEND2, BLUNTCUT |
| 10 | ||
| 0810 0806 03 L1 300 0,3M (0810 0806 ... L1 3...) | Lutronic Holdings | CABLEEND1, M8, MALE, STRAIGHT, A-CODED, CABLEEND2, M8, FEMALE, ANGLED, LEDL1 |
| 5 | ||
| A806LP | nVent Hoffman | LP BOX 8.00X6.00X3.50 GRAY, 8.00X6.00X3.50, STEEL |
| 3 | ||
| RJ0806L | SMC Corporation of America | SHOCK ABSORBER BASIC TYPE, M8 X 1 PORT SIZE, RJ SERIES |
| 1 | ||
| R1806L60 | POBCO Inc | ALUMINUM GUIDE RAIL MILL FINISH, MOUNTS WITH 1/4IN BOLT X 5 FT LENGTH |
| 0 | ||
| RJ0806LS | SMC Corporation of America | SHOCK ABSORBER, RJ SERIES |
| 0 | ||
| P36806L254 | APEM Inc | DIP ROTARY SWITCH P25 7MM LOW RoHS : Compliant |
| 0 | ||
| 87606-806LF | Amphenol FCi | DUBOX RCP DR TMT VERT-HE13 RoHS : Compliant |
| 0 | ||
| 54102G0806LF | Amphenol FCi | 54102-G0806LF-DUPLEX |
| 0 | ||
| 7731581806LF | Amphenol FCi | BERGSTIK |
| 0 | ||
| 77313-118-06LF | Amphenol FCi | BERGSTIK HDR DR STR-77313-118-06LF RoHS : Unknown |
| 0 | ||
| LTILA51-1C-BL-AM-A/125N (RLL-49226806|LTILA51-1C-BL-AM-A/125N|LTILA511CBLAMA/125 | Carling Technologies | ROCKER SWITCH, FULL SIZED, TIPPETTE SERIES |
| 0 | ||
![]() Microchip Technology Inc | ZL30806LFG7 | Microchip Technology Inc | 10:3 MUX monitor and freq converter, VFLGA, Projected EOL: 2045-12-16 RoHS : Compliant |
| 0 | |
![]() Rochester Electronics | DAC0806LCN | National Semiconductor Corporation | D/A Converter, 1 Func, Parallel, 8 Bits Input Loading, 0.15us Settling Time, PDIP16 RoHS : Not Compliant |
| 545 | |
![]() Sager | MTMM-108-06-L-S-175 | Samtec Inc | Headers & Wire Housings Variable Post Height Header Strips, 2.00 mm Pitch RoHS : Compliant |
| 660 | |
| P36806L254 | IDEC Corporation | DIP ROTARY SWITCH P25 7MM LOW |
| 0 | ||
| MTMM-108-06-L-S-300 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| MTSW-108-06-L-S-025 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| TMM-108-06-L-D-SM-M-TR | Samtec Inc | Headers & Wire Housings 2.00 mm Low Profile Terminal Strip RoHS : Compliant | 0 | |||
| TMM-108-06-L-S-002 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| TMM-118-06-L-D-SM-M | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| TMM-128-06-L-S-SM | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| TW-28-06-L-5-320-200 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-28-06-L-S-250-SM | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-08-06-L-6-250-100 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-08-06-L-D-360-140 | Samtec Inc | Board to Board & Mezzanine Connectors RoHS : Compliant | 0 | |||
| TW-08-06-L-D-390-093 | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Surface Mount Board Stacking Header, 2.00 mm Pitch RoHS : Compliant |
| 0 | ||
| TW-08-06-L-D-395-SM-A-P | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Surface Mount Board Stacking Header, 2.00 mm Pitch RoHS : Compliant |
| 0 | ||
| TW-08-06-L-D-430-SM-A-P | Samtec Inc | Board to Board & Mezzanine Connectors Flexible Surface Mount Board Stacking Header, 2.00 mm Pitch RoHS : Compliant |
| 0 | ||
![]() Interstate Connecting Components | 420BA002B2806L | Glenair Inc | D8 - CONNECTOR ACCESS | 1 | ||
| 87606-806LF | Amphenol FCi | DUBOX RCP DR TMT VERT-HE13 RoHS : Compliant | 0 | |||
| 77313-118-06LF | Amphenol FCi | BERGSTIK RoHS : Unknown |
| 0 | ||
| M12883/48-06 L/C | Amphenol PCD | LOW PROFILE 3 POLE/25 AMP LC | 0 | |||
| 380AD007NF1806L | Glenair Inc | EMI/RFI NON-ENVIRO BS LIGHT DUTY W STRAIN RELIEF | 0 | |||
| 400FS001N1806L4 | Glenair Inc | TAG RING BACKSHELL STRAIGHT W STRAIN RELIEF |
| 0 | ||
| 54201-S0806LF | Amphenol FCi | B/S 0.100 HDR RoHS : Compliant |
| 0 | ||
| 57102-G08-06LF | Amphenol FCi | MINITEK HDR DR STR TMT-UNSHROU RoHS : Compliant | 0 | |||
| 10144518-024806LF | Amphenol FCi | BERGSTAK P4 20P-10144518-02480 | 0 | |||
| 407AS036Z11806L3S | Glenair Inc | TAG RING ADAPTERS | 0 | |||
| 380JS008B1806L4 | Glenair Inc | EMI/RFI NON-ENVIRO BS LIGHT DUTY W STRAIN RELIEF |
| 0 | ||
| 380FD007NF1806L | Glenair Inc | EMI/RFI NON-ENVIRO BS LIGHT DUTY W STRAIN RELIEF RoHS : Not Compliant |
| 0 | ||
| 440AA001NF2806L | Glenair Inc | 0 | ||||
| G2806L2012A | Glenair Inc | 0 | ||||
| 380FS008M1806L4 | Glenair Inc | EMI/RFI NON-ENVIRO BS STRAIGHT W STRAIN RELIEF | 0 | |||
![]() NexGen Digital | 54201-T0806LF | Amphenol Corporation | 120 | |||
![]() PEI Genesis | S4603FA1806L34 | SOURIAU-SUNBANK |
| 0 | ||
| S4603FS1806L34-6 | SOURIAU-SUNBANK |
| 0 | |||
| S4039S0806-L | SOURIAU-SUNBANK |
| 0 | |||
| S4603CR1806L34 | SOURIAU-SUNBANK |
| 0 | |||
| S4603CA1806L34 | SOURIAU-SUNBANK |
| 0 | |||
| S4603CS2806L4-8 | SOURIAU-SUNBANK |
| 0 | |||
| S4603CS2806L34-6 | SOURIAU-SUNBANK |
| 0 | |||
| S4603FR2806L34 | SOURIAU-SUNBANK |
| 0 | |||
| S4603FS2806L34-6 | SOURIAU-SUNBANK |
| 0 | |||
| S4603CR2806L34 | SOURIAU-SUNBANK |
| 0 | |||
| S4603FA2806L34 | SOURIAU-SUNBANK |
| 0 | |||
| GC806LN5 REV D | ITT Interconnect Solutions |
| 0 | |||
| M12883/48-06-LC | Amphenol PCD |
| 0 | |||
| S4603CS1806L34-6 | SOURIAU-SUNBANK |
| 0 | |||
| HS5842WS1806L | SOURIAU-SUNBANK |
| 0 | |||
![]() Powell Electronics | 77313-118-06LF | Amphenol FCi | Cable Assembly RoHS : Unknown |
| 6,375 | |
| 98414-G08-06LF | Amphenol FCi | Cable Assembly RoHS : Compliant |
| 625 | ||
| MTSW-108-06-L-S-172 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 521 | ||
| MTMM-108-06-L-S-175 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 436 | ||
| MTMM-108-06-L-S-240 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 436 | ||
| MTMM-108-06-L-S-090 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 436 | ||
| MTLW-108-06-L-S-145 | Samtec Inc | .100 Mini Mate Universal Single Row Disc RoHS : Compliant |
| 356 | ||
| MTMM-108-06-L-D-197 | Samtec Inc | PCB Header, 2.00mm Pitch, SMT, Male, Mal RoHS : Compliant |
| 341 | ||
| MTMM-108-06-L-D-220 | Samtec Inc | Variable Post Height Header Strips, 2.00 RoHS : Compliant |
| 341 | ||
| MTMM-108-06-L-D-235 | Samtec Inc | PCB Header, 2.00mm Pitch, SMT, Male, Mal RoHS : Compliant |
| 341 | ||
| MTLW-108-06-L-D-125 | Samtec Inc | .100" Low Profile Variable Post Height T RoHS : Compliant |
| 187 | ||
| HMTSW-108-06-L-D-110 | Samtec Inc | .100" High-Temp Variable Post Height Ter RoHS : Compliant |
| 180 | ||
| ZST-108-06-L-D-1040 | Samtec Inc | .100" Shrouded Elevated Terminal Strip, RoHS : Compliant |
| 101 | ||
| ZSS-108-06-L-D-1040 | Samtec Inc | .100" Shrouded Elevated Terminal Strip RoHS : Compliant |
| 77 | ||
| ZSS-118-06-L-D-1040 | Samtec Inc | .100" Shrouded Elevated Terminal Strip RoHS : Compliant |
| 54 | ||
![]() Rutronik | 77311-118-06LF | Amphenol Communications Solutions | 06P HEADER STRAIGHT h=11.43 RoHS : Compliant |
| 3,500 | |
![]() Avnet Abacus | 77311-118-06LF | Amphenol Corporation | Conn Unshrouded Header HDR 6 POS 254mm Solder ST ThruHole Bag (Alt: 77311-118-06LF) RoHS : Compliant | 19,000 | ||
| 77313-118-06LF | Amphenol Corporation | Conn Unshrouded Header 6 POS 254mm Solder ST Through Hole (Alt: 77313-118-06LF) RoHS : Compliant | 2,000 | |||
| 87606-806LF | Amphenol Corporation | (Alt: 87606-806LF) RoHS : Compliant | 0 | |||
| 54201-S0806LF | Amphenol Corporation | (Alt: 54201-S0806LF) RoHS : Compliant | 0 | |||
| AMSRU-7806LEZ | Aimtec | Switching Regulators (Alt: AMSRU-7806LEZ) RoHS : Compliant | 0 | |||
| 77313-118-06LF | Amphenol Corporation | Conn Unshrouded Header 6 POS 254mm Solder ST Through Hole (Alt: 77313-118-06LF) RoHS : Compliant | 0 | |||
| 75844-128-06LF | Amphenol Corporation | (Alt: 75844-128-06LF) RoHS : Compliant | 0 | |||
| 98414-G08-06LF | Amphenol Corporation | Conn Shrouded Header HDR 6 POS 2mm Solder ST ThruHole Plastic Box (Alt: 98414-G08-06LF) RoHS : Compliant | 0 | |||
| 98414-S08-06LF | Amphenol Corporation | Conn Shrouded Header HDR 6 POS 2mm Solder ST ThruHole Plastic Box (Alt: 98414-S08-06LF) RoHS : Compliant | 0 | |||
| 77313-418-06LF | Amphenol Corporation | Conn Unshrouded Header HDR 6 POS 254mm Solder ST ThruHole Poly Bag (Alt: 77313-418-06LF) RoHS : Compliant | 0 | |||
| TMM-108-06-L-D-SM-TR | Samtec Inc | (Alt: TMM-108-06-L-D-SM-TR) RoHS : Compliant | 0 | |||
| TW-08-06-L-D-140-110 | Samtec Inc | (Alt: TW-08-06-L-D-140-110) RoHS : Compliant | 0 | |||
| TW-08-06-L-D-382-125 | Samtec Inc | Conn Board Stacker HDR 16 POS 97mm Stack Height 2mm Solder ST Through Hole (Alt: TW-08-06-L-D-382-125) RoHS : Compliant | 0 | |||
| TMM-128-06-L-D-SM-A-P-TR | Samtec Inc | Pin Header BoardtoBoard 33 A 2 Rows 56 Contacts Surface Mount TMM Series Unshrouded (Alt: TMM-128-06-L-D-SM-A-P-TR) RoHS : Compliant | 0 | |||
| TW-18-06-LM-D-300-SM-A-P-TR | Samtec Inc | Conn Board Stacker HDR 36 POS 2mm Solder ST SMD TR (Alt: TW-18-06-LM-D-300-SM-A-P-TR) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 77311-838-06LF | Amphenol Corporation | (Alt: 77311-838-06LF) RoHS : Compliant | 0 | ||
| LTTH806LW_NC | Diodes Incorporated | (Alt: LTTH806LW_NC) RoHS : Compliant | 0 | |||
| GS2806LF | Globaltech Semiconductor Co Ltd | (Alt: GS2806LF) RoHS : Compliant | 0 | |||
| 77313-818-06LF | Amphenol Corporation | (Alt: 77313-818-06LF) RoHS : Compliant | 0 | |||
![]() Avnet Silica | LTTH806LF | Diodes Incorporated | (Alt: LTTH806LF) RoHS : Compliant | 0 | ||
| 5962-8851806LA | Teledyne HiRel | (Alt: 5962-8851806LA) RoHS : Not Compliant | 0 | |||
| B39162B2806L210 | Qualcomm RFFE Filter Products | Microacoustic filter (Alt: B39162B2806L210) RoHS : Compliant | 0 | |||
![]() Braemac Americas-Symmetry | AMSRB1-7806LPZ | Aimtec | RoHS : Compliant |
| 0 | |
![]() Component Electronics, Inc | PI6C10806LEX![]() | Pericom Semiconductor Corporation | IN STOCK SHIP TODAY RoHS : Compliant | 1,281 | ||
![]() FDH Electronics | HS5842WS1806L | Glenair Inc | Backshells & Ac |
| 193 | |
| 400FS001N1806L4 | Glenair Inc | Backshells & Ac |
| 0 | ||
| 380JS008B1806L4 | Glenair Inc | Connector |
| 0 | ||
| 380FD007NF1806L | Glenair Inc | Connector RoHS : Not Compliant |
| 0 | ||
| 400AA001NF1806L | Glenair Inc | Connector RoHS : Not Compliant |
| 0 | ||
| HS5842WS1806L | SOURIAU-SUNBANK | Connector Acc |
| 0 | ||
| 402FA001NF1806LD | Glenair Inc | Connector |
| 0 | ||
| 400AA001NF2806L | Glenair Inc | Backshells & Ac RoHS : Not Compliant |
| 0 | ||
| 390AS011NF1806L4 | Glenair Inc | Connector RoHS : Not Compliant |
| 0 | ||
| 380FA007M0806L | Glenair Inc | Connector RoHS : Compliant |
| 0 | ||
| 400AS011NF1806L | Glenair Inc | Connector RoHS : Not Compliant |
| 0 | ||
![]() Maritex | FCN10806_LR1-D | LEDIL | Lens LEDIL FCN10806_LR1-D + holder,11 dgr., W:21.6mm H:14.3mm, for LED Luxeon Rebel, RoHS |
| 2 | |
![]() Master Electronics | YTW-38-06-L-Q-250-085-100 | Samtec Inc | RoHS : Compliant |
| 0 | |
| MTLW-108-06-L-D-150 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| P36806L254 | APEM Inc | DIP ROTARY SWITCH P25 7MM RoHS : Compliant |
| 0 | ||
| MTLW-108-06-L-D-155 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTLW-118-06-L-D-125 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTLW-128-06-L-D-140 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-108-06-L-D-035 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-108-06-L-S-175 | Samtec Inc | 2.00 mm Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTMM-108-06-L-S-300 | Samtec Inc | 2.00 mm Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| MTMM-118-06-L-D-005 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-118-06-L-S-145 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-128-06-L-S-160 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTMM-148-06-L-Q-085 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| MTSW-108-06-L-S-025 | Samtec Inc | .100 Variable Post Height Terminal Strip RoHS : Compliant |
| 0 | ||
| TMM-108-06-L-S-002 | Samtec Inc | Conn Unshrouded Header HDR 8 POS 2mm Solder ST Thru-Hole RoHS : Compliant |
| 0 | ||
![]() Pasternack Enterprises US | PE3806LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50, RF Cable Part Number: RG62A/U, RF Cable Type: RG62, RF Cable Impedance: 93. SMA Male to SMA Female Bulkhead Cable Using 93 Ohm RG62 Coax. PE3806LF is a SMA male to SMA female bulkhead cable using RG62 coax. This Pasternack SMA male to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to female SMA bulkhead cable assembly uses a flexible cable type that is 93 Ohm. Pasternack PE3806LF SMA male to SMA female bulkhead cable assembly is constructed with RG62 coax. | 864 | ||
| PE3806LF-24 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG62A/U, RF Cable Type: RG62, RF Cable Impedance: 93 Ohm, Length: 24 inches. SMA Male to SMA Female Bulkhead Cable 24 Inch Length Using 93 Ohm RG62 Coax., Radio frequency assembly SMA male to SMA female bulkhead cable 24 inch length using 93 Ohm RG62 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female bulkhead cable 24 inch length using 93 Ohm RG62 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3806LF-24, can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3806LF-24 is built with RG62 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3806LF-24 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead cable 24 inch length using 93 Ohm RG62 coax. |
| 108 | ||
| PE3806LF-72 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG62A/U, RF Cable Type: RG62, RF Cable Impedance: 93 Ohm, Length: 72 inches. SMA Male to SMA Female Bulkhead Cable 72 Inch Length Using 93 Ohm RG62 Coax., Radio frequency assembly SMA male to SMA female bulkhead cable 72 inch length using 93 Ohm RG62 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female bulkhead cable 72 inch length using 93 Ohm RG62 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3806LF-72, can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3806LF-72 is built with RG62 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3806LF-72 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead cable 72 inch length using 93 Ohm RG62 coax. |
| 108 | ||
| PE3806LF-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG62A/U, RF Cable Type: RG62, RF Cable Impedance: 93 Ohm, Length: 48 inches. SMA Male to SMA Female Bulkhead Cable 48 Inch Length Using 93 Ohm RG62 Coax., Radio frequency assembly SMA male to SMA female bulkhead cable 48 inch length using 93 Ohm RG62 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female bulkhead cable 48 inch length using 93 Ohm RG62 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3806LF-48, can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3806LF-48 is built with RG62 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3806LF-48 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead cable 48 inch length using 93 Ohm RG62 coax. |
| 108 | ||
| PE3806LF-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG62A/U, RF Cable Type: RG62, RF Cable Impedance: 93 Ohm, Length: 12 inches. SMA Male to SMA Female Bulkhead Cable 12 Inch Length Using 93 Ohm RG62 Coax., Radio frequency assembly SMA male to SMA female bulkhead cable 12 inch length using 93 Ohm RG62 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female bulkhead cable 12 inch length using 93 Ohm RG62 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3806LF-12, can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3806LF-12 is built with RG62 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3806LF-12 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead cable 12 inch length using 93 Ohm RG62 coax. |
| 108 | ||
| PE3806LF-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG62A/U, RF Cable Type: RG62, RF Cable Impedance: 93 Ohm, Length: 60 inches. SMA Male to SMA Female Bulkhead Cable 60 Inch Length Using 93 Ohm RG62 Coax., Radio frequency assembly SMA male to SMA female bulkhead cable 60 inch length using 93 Ohm RG62 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA female bulkhead cable 60 inch length using 93 Ohm RG62 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMA bulkhead cable connection on the other. Our SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3806LF-60, can also be known as a SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3806LF-60 is built with RG62 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3806LF-60 can also be used in the other direction and will be SMA female bulkhead to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA female bulkhead cable 60 inch length using 93 Ohm RG62 coax. |
| 108 | ||
| PE3C5806LF | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.4mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. 2.4mm Male to 2.4mm Male Cable Using PE-SR405FL Coax, LF Solder. PE3C5806LF is a 2.4mm male to 2.4mm male cable using PE-SR405FL coax. This Pasternack 2.4mm male to 2.4mm male cable assembly uses a 50 Ohm 2.4mm for connector 1 and a 50 Ohm 2.4mm for connector 2. Our male 2.4mm to male 2.4mm cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3C5806LF 2.4mm male to 2.4mm male cable assembly is constructed with PE-SR405FL coax. | 0 | |||
| PE37806LF | Pasternack Enterprises | Key Specifications, Connector Series 1: HN, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG225/U, RF Cable Type: RG225, RF Cable Impedance: 50 Ohm. HN Male to 7/16 DIN Male Cable Using RG225 Coax, LF Solder. PE37806LF is a HN male to 7/16 DIN male cable using RG225 coax. This Pasternack HN male to 7/16 DIN male cable assembly uses a 50 Ohm HN for connector 1 and a 50 Ohm 7/16 DIN for connector 2. Our male HN to male 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE37806LF HN male to 7/16 DIN male cable assembly is constructed with RG225 coax. | 0 | |||
| PE3W04806LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG174A/U, RF Cable Type: RG174, RF Cable Impedance: 50 Ohm. SMA Male to SMA Female Bulkhead Cable Using RG174 Coax, LF Solder. PE3W04806LF is a SMA male to SMA female bulkhead cable using RG174 coax. This Pasternack SMA male to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our male SMA to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W04806LF SMA male to SMA female bulkhead cable assembly is constructed with RG174 coax. | 0 | |||
| PE3W15806LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Reverse Thread, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Reverse Thread, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P195, RF Cable Type: PE-P195, RF Cable Impedance: 50 Ohm. Reverse Thread SMA Male to Reverse Thread SMA Male Cable Using PE-P195 Coax, LF Solder. PE3W15806LF is a reverse thread SMA male to reverse thread SMA male cable using PE-P195 coax. This Pasternack reverse thread SMA male to reverse thread SMA male cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. Our reverse thread male SMA to reverse thread male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W15806LF SMA reverse thread male to SMA reverse thread male cable assembly is constructed with PE-P195 coax. | 0 | |||
| PE3C5806LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: 2.4mm, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 2.4mm, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. 2.4mm Male to 2.4mm Male Cable Using PE-SR405FL Coax with HeatShrink, LF Solder. PE3C5806LF/HS is a 2.4mm male to 2.4mm male cable using PE-SR405FL coax. This Pasternack 2.4mm male to 2.4mm male cable assembly uses a 50 Ohm 2.4mm for connector 1 and a 50 Ohm 2.4mm for connector 2. Our male 2.4mm to male 2.4mm cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3C5806LF/HS 2.4mm male to 2.4mm male cable assembly is constructed with PE-SR405FL coax. | 0 | |||
| PE33806LF | Pasternack Enterprises | Key Specifications, Connector Series 1: SMB, Connector Gender 1: Plug, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm. SMB Plug Right Angle to SMB Plug Right Angle Cable Using PE-SR405FL Coax, RoHS. PE33806LF is a SMB plug right angle to SMB plug right angle cable using PE-SR405FL coax. This Pasternack SMB plug right angle to SMB plug right angle cable assembly uses a 50 Ohm SMB for connector 1 and a 50 Ohm SMB for connector 2. SMB right angle to SMB right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our plug SMB right angle to plug SMB right angle cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE33806LF SMB plug right angle to SMB plug right angle cable assembly is constructed with PE-SR405FL coax. | 0 | |||
| PE3W17806LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: BMA, Connector Gender 1: Jack, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: TNC, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR402FLJ, RF Cable Type: PE-SR402FLJ, RF Cable Impedance: 50 Ohm. Snap-On BMA Jack to TNC Female Bulkhead Cable Using PE-SR402FLJ Coax with HeatShrink, LF Solder. PE3W17806LF/HS is a BMA jack to TNC female bulkhead cable using PE-SR402FLJ coax. This Pasternack BMA jack to TNC female bulkhead cable assembly uses a 50 Ohm BMA for connector 1 and a 50 Ohm TNC for connector 2. Our jack BMA to female TNC bulkhead cable assembly uses a formable cable type that is 50 Ohm. Pasternack PE3W17806LF/HS BMA jack to TNC female bulkhead cable assembly is constructed with PE-SR402FLJ coax. | 0 | |||
| PE3W03806LF | Pasternack Enterprises | Key Specifications, Connector Series 1: MHV, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: HN, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG213/U, RF Cable Type: RG213, RF Cable Impedance: 50 Ohm. MHV Male to HN Male Cable Using RG213 Coax, LF Solder. PE3W03806LF is a MHV male to HN male cable using RG213 coax. This Pasternack MHV male to HN male cable assembly uses a 50 Ohm MHV for connector 1 and a 50 Ohm HN for connector 2. Our male MHV to male HN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W03806LF MHV male to HN male cable assembly is constructed with RG213 coax. | 0 | |||
| PE3W02806LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Female Bulkhead Cable Using RG142 Coax with HeatShrink, LF Solder. PE3W02806LF/HS is a SMA male right angle to SMA female bulkhead cable using RG142 coax. This Pasternack SMA male right angle to SMA female bulkhead cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm SMA for connector 2. SMA right angle to SMA coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA right angle to female SMA bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W02806LF/HS SMA male right angle to SMA female bulkhead cable assembly is constructed with RG142 coax. | 0 | |||
![]() Teledyne HiRel | 5962-8851806LA | Teledyne HiRel | PROM, 512 X 8, REGISTERED, 40 NS ACCESS TIME RoHS : Not Compliant | 0 | ||
![]() Vyrian | UCC1806L![]() | Texas Instruments | Switching Controller, Current-mode, 0.5A, 1000kHz Switching Freq-Max, BICMOS, CQCC20 RoHS : Not Compliant | 29,650 | ||
| 75844-318-06LF | Amphenol Communications Solutions | Board Connector, 6 Contact(s), 2 Row(s), Male, Straight, Solder Terminal | 10,000 | |||
UCC1806LQMLV![]() | Texas Instruments | Switching Controller, Current-mode, 0.5A, 1000kHz Switching Freq-Max, BICMOS, CQCC20 | 8,950 | |||
UCC1806L883B![]() | Texas Instruments | Switching Controller, Current-mode, 0.5A, 1000kHz Switching Freq-Max, BICMOS, CQCC20 RoHS : Not Compliant | 3,000 | |||
| UCC2806L | Texas Instruments | Switching Controller, Current-mode, 1A, 1000kHz Switching Freq-Max, BICMOS, CQCC20 | 2,750 | |||
| DAC0806LCJ | Analog Devices Inc | 1,300 | ||||
| DAC0806LCM | National Semiconductor Corporation | D/A Converter, 1 Func, Parallel, 8 Bits Input Loading, 0.15us Settling Time, PDSO16 RoHS : Not Compliant | 800 | |||
UCC3806L![]() | Texas Instruments | Switching Controller, Current-mode, 1A, 1000kHz Switching Freq-Max, BICMOS, CQCC20 | 150 |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |