 |
поискавой системы для электроныых деталей |
|
|
поискавой системы для электроныых деталей |
|
800DCNSMNFZCWC дистрибьютор |
| дистрибьютор | номер детали | производитель | подробное описание детали | Price | Qty. BuyNow | |
 DB Roberts | 8003248 | Haeger | ASSY LIGHTSTREAM COLLAR |
| 4 | |
| 3BP-P8008-00 | Acumnet / Camcar | 4-20 X 5/8 PHIL PAN HD | 0 | |||
| 389-80018-00 | Acumnet / Camcar | 0 | ||||
| 3BT-P8008-00 | Acumnet / Camcar | 0 | ||||
| 0080080000VR | Essentra Components | 0 | ||||
| 07498-00800 | Avdel | NOSE ASSY-38 AVTAINER | 0 | |||
| 3BH-H8008-00 | Acumnet / Camcar | 8-32 X 5/16 SLTD HWH SW | 0 | |||
| 138008000016 | Essentra Components | 0 | ||||
| 5507-N-180-062-140 | RAF Electronic Hardware | SHOULDER WASHERS | 0 | |||
| 782PP-800021 | Avdel | SCHARNIER ST SCHWARZ SIEHE Z | 0 | |||
| 56-280-000 | Southco | 56-280-000 | 0 | |||
| 3BT-P8118-00 | Acumnet / Camcar | IR4-40 X 5/8 TXP PAN HD | 0 | |||
| 3BT-P9548-00 | Acumnet / Camcar | DELTA-PT45-1.63 X 12 TXP | 0 | |||
| D-08652800 | Avdel | COVER | 0 | |||
| LSN15-50-1800 | Sugatsune Kogyo Co Ltd | PIANO HINGE | 0 | |||
 ECCO | 980-0006-014-MS | ITT Interconnect Solutions |
| 4,997 | ||
| 980-0000-194 | ITT Interconnect Solutions |
| 1,728 | |||
| 351-1018-000 | ITT Interconnect Solutions |
| 1,527 | |||
| 9800006053 | ITT Interconnect Solutions |
| 845 | |||
| 10-821768-000 | Amphenol Industrial Operations |
| 731 | |||
| 0950058000 | ITT Interconnect Solutions |
| 381 | |||
| 980-0006-059 | ITT Interconnect Solutions |
| 152 | |||
| 044-1008-000-MS | ITT Interconnect Solutions |
| 100 | |||
| 024248-0003-R | ITT Interconnect Solutions |
| 100 | |||
| 057-3008-000MS | ITT Interconnect Solutions |
| 80 | |||
| 105-0348-000 | ITT Interconnect Solutions |
| 65 | |||
| 2370408000 | ITT Interconnect Solutions |
| 60 | |||
| C10-737238-003 | Amphenol Industrial Operations |
| 15 | |||
| 024248-0007-R | ITT Interconnect Solutions |
| 5 | |||
| 351-0318-000 | ITT Interconnect Solutions |
| 1 | |||
 Pasternack Enterprises US | PE15A8000 | Pasternack Enterprises | Key Specifications. Power Output 23 dBm P1dB Frequency, Min 50 MHz Frequency, Max 4 GHz Gain 26 dB Noise Figure, Max 6.5 dB Noise Figure, Typ 5 dB RF Input VSWR, Max 1.8 Voltage, DC Min 11.5 Volts Voltage, DC Max 13 Volts Connector Series SMA. 23 dBm P1dB, 50 MHz to 4 GHz, Gain Block Amplifier, 26 dB Gain, 35 dBm IP3, 5 dB NF, SMA. PE15A8000 RF gain block amplifier from Pasternack is featured in our extensive in-stock RF amplifier selection. Our connectorized gain block RF amplifier uses SMA connectors. This SMA gain block amplifier has a minimum frequency of 50 MHz, a maximum frequency of 4 GHz and a typical gain of 26 dB. Our radio frequency gain block amp PE15A8000 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. This coaxial gain block amplifier can ship worldwide the same day of the purchase as with our other available RF parts. |
| 2 | |
| PE3C8003-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: NEX10, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: NEX10, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 19.68 inches. NEX10 Male to NEX10 Male Low PIM Cable 50 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly NEX10 male to NEX10 male low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, rugged and designed for defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The NEX10 male to NEX10 male low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom NEX10 to NEX10 cable assembly orders will ship the same business day as well. Pasternack RF coax low PIM cable assembly is built with a NEX10 cable connection on one end and a NEX10 cable connection on the other. Our low PIM NEX10 to NEX10 cable assembly has a male gender on end 1 and a male on end 2. PE3C8003-50CM can also be known as a low PIM NEX10 plug to NEX10 plug cable assembly and will be shipped the same day as it is purchased. This flexible RF cable assembly with a 0.472-inch diameter has copper as the cable's inner conducting material and PTFE dielectric type. NEX10 low PIM cable assemblies from Pasternack are ideal for applications including indoor and outdoor use and plenum rated applications. The minimum bend radius for this cable is 0.75 inches, allowing for a single bend without damaging the cable. Our PE3C8003-50CM RF cable has a FEP jacket of 0.160-inch diameter. This radio frequency cable assembly can withstand temperatures ranging from -40 to 125 degrees C. The flexible RF cable has an in-series connection. This cable assembly has a typical propagation velocity of 76% and a minimum RF shielding of 80 dB. Our NEX10 male to NEX10 male cable has a maximum VSWR of 1.4:1. NEX10 plug to NEX10 plug cable assembly PE3C8003-50CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible NEX10 cable assembly is manufactured with NEX10 to NEX10 cable connectors, has a 50 Ohm impedance, and is double shielded. Both the connectors have a solder/solder attachment method and a brass body with silver plating. Additional dimensions, specifications and CAD drawings for this low PIM RF cable are available on our downloadable PDF datasheet. Low PIM NEX10 plug to NEX10 plug cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality NEX10 to NEX10 cable assembly for quick shipment worldwide. Variations of NEX10 cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component interconnection and more for RF test & measurement labs, rugged and MIL-STD designed military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal NEX10 to NEX10 low PIM RF cable assembly as per your requirements. |
| 0 | ||
| PE3C8005 | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. QMA Male to QMA Male Low PIM Cable Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly QMA male to QMA male low PIM cable using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QMA male to QMA male low PIM cable using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with QMA cable connection on one end and QMA cable connection on the other. Our low PIM QMA to QMA cable assemblies have a male gender on end 1 and male on end 2. This QMA to QMA cable is a male to male coax assembly, PE3C8005, can also be known as a low PIM QMA plug to QMA plug cable assembly and will be shipped same-day as it is purchased. QMA plug to QMA plug cable assembly PE3C8005 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible QMA cable assembly is manufactured with QMA to QMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM QMA male to QMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM QMA plug to QMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to QMA cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QMA male to QMA male low PIM cable using TFT-5G-402 coax using Times Microwave components. | 0 | |||
| PE3W08007LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG58C/U, RF Cable Type: RG58, RF Cable Impedance: 50 Ohm. N Female Bulkhead to N Female Bulkhead Cable Using RG58 Coax with HeatShrink, LF Solder. PE3W08007LF/HS is a N female bulkhead to N female bulkhead cable using RG58 coax. This Pasternack N female bulkhead to N female bulkhead cable assembly uses a 50 Ohm N for connector 1 and a 50 Ohm N for connector 2. Our female N bulkhead to female N bulkhead cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08007LF/HS N female bulkhead to N female bulkhead cable assembly is constructed with RG58 coax. | 0 | |||
| PE3W08009 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-400-UF, RF Cable Type: LMR-400-UF, RF Cable Impedance: 50 Ohm. TNC Male to SMA Male Cable Using LMR-400-UF Coax. PE3W08009 is a TNC male to SMA male cable using LMR-400-UF coax. This Pasternack TNC male to SMA male cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMA for connector 2. Our male TNC to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W08009 TNC male to SMA male cable assembly is constructed with LMR-400-UF coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W18800 | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. TNC Female to SMB Plug Cable Using RG142 Coax. PE3W18800 is a TNC female to SMB plug cable using RG142 coax. This Pasternack TNC female to SMB plug cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMB for connector 2. Our female TNC to plug SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18800 TNC female to SMB plug cable assembly is constructed with RG142 coax. | 0 | |||
| PE3W18800/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG142B/U, RF Cable Type: RG142, RF Cable Impedance: 50 Ohm. TNC Female to SMB Plug Cable Using RG142 Coax with HeatShrink. PE3W18800/HS is a TNC female to SMB plug cable using RG142 coax. This Pasternack TNC female to SMB plug cable assembly uses a 50 Ohm TNC for connector 1 and a 50 Ohm SMB for connector 2. Our female TNC to plug SMB cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W18800/HS TNC female to SMB plug cable assembly is constructed with RG142 coax. | 0 | |||
| PE3800/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm. SMA Male Right Angle to SMA Female Bulkhead Cable Using RG223 Coax with HeatShrink., Radio frequency assembly SMA male right angle to SMA female bulkhead cable using RG223 coax with heatshrink from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA female bulkhead cable using RG223 coax with heatshrink, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA bulkhead cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3800/HS, can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3800/HS is built with RG223 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 12.4 GHz maximum frequency SMA right angle male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3800/HS can also be used in the other direction and will be SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female bulkhead cable using RG223 coax with heatshrink. | 0 | |||
| PE38002 | Pasternack Enterprises | 0 | ||||
| PE38005 | Pasternack Enterprises | 0 | ||||
| PE3C8005-48 | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: QMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length: 48 inches. QMA Male to QMA Male Low PIM Cable 48 Inch Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly QMA male to QMA male low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. QMA male to QMA male low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with QMA cable connection on one end and QMA cable connection on the other. Our low PIM QMA to QMA cable assemblies have a male gender on end 1 and male on end 2. This QMA to QMA cable is a male to male coax assembly, PE3C8005-48, can also be known as a low PIM QMA plug to QMA plug cable assembly and will be shipped same-day as it is purchased. QMA plug to QMA plug cable assembly PE3C8005-48 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible QMA cable assembly is manufactured with QMA to QMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM QMA male to QMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM QMA plug to QMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to QMA cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QMA male to QMA male low PIM cable 48 inch length using TFT-5G-402 coax using Times Microwave components. |
| 0 | ||
| PE3C8006-50CM | Pasternack Enterprises | Key Specifications, Connector 1 Series: QMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 50 Ohm, Connector 2 Series: QMA, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Silver, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length, Max: 19.68 inches. QMA Male to QMA Male Right Angle Low PIM Cable 50 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly QMA male to QMA male right angle low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The QMA male to QMA male right angle low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components, QMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom QMA to QMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with QMA cable connection on one end and right angle QMA cable connection on the other. Our low PIM QMA to right angle QMA cable assemblies have a male gender on end 1 and male on end 2. This QMA to QMA cable is a male to male coax assembly, PE3C8006-50CM, can also be known as a low PIM QMA plug to right angle QMA plug cable assembly and will be shipped same-day as it is purchased. QMA plug to QMA plug cable assembly PE3C8006-50CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible QMA cable assembly is manufactured with QMA to right angle QMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 3 GHz maximum frequency low PIM QMA male to QMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8006-50CM can also be used in the other direction and will be right angle QMA male to QMA male cable assembly if the opposite connectivity is required. Low PIM QMA plug to QMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality QMA to QMA cable assembly for quick shipment worldwide. Variations of QMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this QMA male to QMA male right angle low PIM cable 50 cm length using TFT-5G-402 coax using Times Microwave components. |
| 0 | ||
| PE3C8008 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm. SMA Male to SMA Male Low PIM Cable Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly SMA male to SMA male low PIM cable using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male low PIM cable using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with SMA cable connection on one end and SMA cable connection on the other. Our low PIM SMA to SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3C8008, can also be known as a low PIM SMA plug to SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C8008 is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM SMA male to SMA male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. Low PIM SMA plug to SMA plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male low PIM cable using TFT-5G-402 coax using Times Microwave components. | 0 | |||
| PE3C8009-150CM | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: TFT-5G-402, RF Cable Type: TFT-5G-402, RF Cable Impedance: 50 Ohm, Length: 59.06 inches. SMA Male to SMA Male Right Angle Low PIM Cable 150 CM Length Using TFT-5G-402 Coax Using Times Microwave Components., Radio frequency assembly SMA male to SMA male right angle low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMA male right angle low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with SMA cable connection on one end and right angle SMA cable connection on the other. Our low PIM SMA to right angle SMA cable assemblies have a male gender on end 1 and male on end 2. This SMA to SMA cable is a male to male coax assembly, PE3C8009-150CM, can also be known as a low PIM SMA plug to right angle SMA plug cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA plug cable assembly PE3C8009-150CM is built with TFT-5G-402 which is a flexible coax type. The Pasternack low passive intermodulation flexible SMA cable assembly is manufactured with SMA to right angle SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency low PIM SMA male to SMA right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C8009-150CM can also be used in the other direction and will be right angle SMA male to SMA male cable assembly if the opposite connectivity is required. Low PIM SMA plug to SMA right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMA male right angle low PIM cable 150 cm length using TFT-5G-402 coax using Times Microwave components. |
| 0 | ||
| PE3800LF-60 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG223/U, RF Cable Type: RG223, RF Cable Impedance: 50 Ohm, Length: 60 inches. SMA Male Right Angle to SMA Female Bulkhead Cable 60 Inch Length Using RG223 Coax, RoHS., Radio frequency assembly SMA male right angle to SMA female bulkhead cable 60 inch length using RG223 coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male right angle to SMA female bulkhead cable 60 inch length using RG223 coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with right angle SMA cable connection on one end and SMA bulkhead cable connection on the other. Our right angle SMA to SMA cable assemblies have a male gender on end 1 and female on end 2. This SMA to SMA cable is a male to female coax assembly, PE3800LF-60, can also be known as a right angle SMA plug to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA plug to SMA jack cable assembly PE3800LF-60 is built with RG223 which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with right angle SMA to SMA cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 12.4 GHz maximum frequency SMA right angle male to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3800LF-60 can also be used in the other direction and will be SMA female bulkhead to right angle SMA male cable assembly if the opposite connectivity is required. SMA right angle plug to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male right angle to SMA female bulkhead cable 60 inch length using RG223 coax, RoHS. |
| 0 | ||
 TE Connectivity | 6PCV-08-006 | TE Connectivity | 6PCV-08-006=6PCV ASSEMBLY Number of Positions: 8 Barrier Strip Style: Tri-Barrier Bottom Termination Type: Printed Circuit Pin Connector System: Wire-to-Board Centerline (Pitch): .375 in Barrier Strip | 8 Tri-Barrier Printed Circuit Pin Wire-to-Board | Part Number: 6PCV-08-006 | Internal Number: 1-1437653-3 | .375" | TE Connectivity RoHS : Compliant |
| 20,744 | |
| 42800-2 | TE Connectivity | 187 FASTON REC 20-16 AWG TPBR Quick Disconnect Terminal Type: Receptacle Insulation Option: Uninsulated Wire Size: 20 – 16 AWG Wire Size: .51 – 1.31 mm² Mating Tab Width: 4.75 mm Receptacle Uninsulated 20 – 16 AWG .51 – 1.31 mm² | Quick Disconnect | Part Number: 42800-2 | Internal Number: 42800-2 | TE Connectivity RoHS : Compliant |
| 10,372 | ||
| 2380000-1 | TE Connectivity | SMB HEADER, ASSEMBLY Connector System: Flex-to-Board Sealable: No Shielded: Yes PCB Mount Orientation: Vertical Number of Positions: 1 Flex-to-Board Vertical | Data Connectivity Header | Part Number: 2380000-1 | Internal Number: 2380000-1 | TE Connectivity RoHS : Compliant |
| 4,808 | ||
| EC0038-000 | TE Connectivity | 05801707 Compatible Cable Diameter Range: 1.5 – 2 mm Compatible Cable Diameter Range: .06 – .08 in Primary Product Color: Violet Marker Style: Push-On Marker Size: 5 Z-Type Push-On Marker | 1.5 – 2 mm .06 – .08" Violet Push-On | Part Number: EC0038-000 | Internal Number: EC0038-000 | Alias Number: 05801707 | TE Connectivity RoHS : Compliant |
| 3,630 | ||
| 0409-201-1800 | TE Connectivity | CABLE CLAMP, 18SZ, AL Primary Product Material: Aluminum Automotive Connector Accessory Type: Cable Clamp Operating Temperature Range: -55 – 125 °C Operating Temperature Range: -67 – 257 °F Aluminum Cable Clamp | Automotive Connector Accessories | Part Number: 0409-201-1800 | Internal Number: 0409-201-1800 | Alias Number: ZPF000000000131689 | TE Connectivity RoHS : Compliant |
| 2,225 | ||
| T4171320008-001 | TE Connectivity | M12,FRONT MOUNT,FEMALE, A, 8P, 0.2M WIRE Connector System: Wire-to-Panel Circular Connector Type: Circular Connector Receptacle Number of Positions: 8 Circular Connector Shell Size: 18 Sealable: Yes Wire-to-Panel Circular Connector Receptacle 8 18 | M12 Panel Mount Wire | Part Number: T4171320008-001 | Internal Number: T4171320008-001 | TE Connectivity RoHS : Compliant |
| 520 | ||
| 5208007-2 | TE Connectivity | HD-20 PLUG 15P VERT Number of Positions: 15 Connector & Housing Type: Plug Connector System: Board-to-Board Connector Mounting Type: Board Mount Connector Shell Size: 2 D-Shaped Connector | 15 Plug Board-to-Board Board Mount | Part Number: 5208007-2 | Internal Number: 5208007-2 | TE Connectivity RoHS : Compliant |
| 402 | ||
| 5148003-5 | TE Connectivity | ASSY,PIN,EUROCARD,TYPE C,LEAD-FREE,96 PO Eurocard Connector | Part Number: 5148003-5 | Internal Number: 5148003-5 | TE Connectivity RoHS : Compliant |
| 260 | ||
| PT28800 | TE Connectivity | PT28800 Body Material: Stainless Steel Relay Accessory Type: Accessory Metal Retaining Clip Stainless Steel Accessory | Relay Accessories | Part Number: PT28800 | Internal Number: 5-1419111-9 | Alias Number: 457508-000 | TE Connectivity RoHS : Compliant |
| 35 | ||
| T4052228003-002 | TE Connectivity | RPC-M8-3MR-1.0-M12-3FR-PUR Cable Assembly Type: M8 to M12 Number of Positions: 3 Cable Assembly Length: 1 m Cable Assembly Length: 3.2 ft M8/M12 Application Type: Sensor/Actuator M8 to M12 3 1 m 3.2 ft | M8 Male R/a To M12 Female R/a Cable Assembly | Part Number: T4052228003-002 | Internal Number: T4052228003-002 | TE Connectivity RoHS : Compliant |
| 30 | ||
| T4161410008-002 | TE Connectivity | RPC-M12-FR-8CON-PVC-1.0SH Cable Assembly Type: M12 Pigtail Number of Positions: 8 Cable Assembly Length: 1 m Cable Assembly Length: 3.2 ft M8/M12 Application Type: Sensor/Actuator M12 Pigtail 8 1 m 3.2 ft | M12 A-Code Pigtail & Female & R/a & Single Ended Cable | Part Number: T4161410008-002 | Internal Number: T4161410008-002 | TE Connectivity RoHS : Compliant |
| 9 | ||
| CJP800J15RJ | TE Connectivity | CJP 800W 15R 5% Lead Resistance Value: 15 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Chassis Mount Resistor | 15 Ω Wire Wound 5 % Power Resistor | Part Number: CJP800J15RJ | Internal Number: 1-2176512-1 | TE Connectivity RoHS : Compliant |
| 7 | ||
| CJP800J6R8J | TE Connectivity | CJP 800W 6R8 5% Lead Resistance Value: 6.8 Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: Up to 1kΩ Chassis Mount Resistor | 6.8 Ω Wire Wound 5 % Power Resistor | Part Number: CJP800J6R8J | Internal Number: 2176512-7 | TE Connectivity RoHS : Compliant |
| 4 | ||
| 1-2405080-0 | TE Connectivity | 75 AHV D BS Ahv | Part Number: 1-2405080-0 | Internal Number: 1-2405080-0 | TE Connectivity RoHS : Compliant |
| 3 | ||
| CJP800J1K2J | TE Connectivity | CJP 800W 1K2 5% Lead Resistance Value: 1.2K Ω Element Type: Wire Wound Passive Component Tolerance: 5 % Resistor Type: Power Resistor Resistance Class: 1kΩ – 1MΩ Chassis Mount Resistor | 1.2K Ω Wire Wound 5 % Power Resistor | Part Number: CJP800J1K2J | Internal Number: 3-2176512-4 | TE Connectivity RoHS : Compliant |
| 2 | ||
 Teledyne HiRel | 8000306QA | Teledyne HiRel | MICROPROCESSOR, 16-BIT, 6.0 MHZ | 0 | ||
5962-9758001QFA | Teledyne HiRel | FLIP-FLOP, JK, DUAL RoHS : Not Compliant | 0 | |||
| 5962-9218001MSA | Teledyne HiRel | LATCH, D-TYPE, 8-BIT, WITH 3-STATE OUTPUTS RoHS : Not Compliant | 0 | |||
8000303XA | Teledyne HiRel | MICROPROCESSOR, 16-BIT, 6.0 MHZ | 0 | |||
8000306YA | Teledyne HiRel | MICROPROCESSOR, 16-BIT, 6.0 MHZ | 0 | |||
5962-9758001Q2A | Teledyne HiRel | FLIP-FLOP, JK, DUAL RoHS : Not Compliant | 0 | |||
| 5962-9080001MFA | Teledyne HiRel | REGISTER, 8-BIT SUCCESSIVE APPROXIMATION RoHS : Not Compliant | 0 | |||
8000304UA | Teledyne HiRel | MICROPROCESSOR, 16-BIT, 10 MHZ | 0 | |||
| 8000304XA | Teledyne HiRel | MICROPROCESSOR, 16-BIT, 10 MHZ | 0 | |||
| 80019012A | Teledyne HiRel | AND GATE, QUAD 2-INPUT, WITH OPEN-COLLECTOR OUTPUTS RoHS : Not Compliant | 0 | |||
8001901CA | Teledyne HiRel | AND GATE, QUAD 2-INPUT, WITH OPEN-COLLECTOR OUTPUTS RoHS : Not Compliant | 0 | |||
| 8000302YA | Teledyne HiRel | MICROPROCESSOR, 16-BIT, 4.0 MHZ | 0 | |||
5962-9080001MEA | Teledyne HiRel | REGISTER, 8-BIT SUCCESSIVE APPROXIMATION RoHS : Not Compliant | 0 | |||
| 8000305QA | Teledyne HiRel | MICROPROCESSOR, 16-BIT, 10 MHZ | 0 | |||
| 8000305YC | Teledyne HiRel | MICROPROCESSOR, 16-BIT, 10 MHZ, GOLD LEAD FINISH | 0 | |||
 Venkel Ltd. | PWCR0805-BL-1800FT | VENKEL LTD | Pulse Withstanding CR;0805;2/5W;�200PPM;180R;�1% RoHS : Compliant | 0 | ||
| PWCR0805-TK-2800FT | VENKEL LTD | Pulse Withstanding CR;0805;1/4W;�100PPM;280R;�1% RoHS : Compliant | 0 | |||
| AGCR1206-TK-6800FT | VENKEL LTD | Auto Grade Resistor;1206;1/4W;�100PPM;680R;�1% RoHS : Compliant | 0 | |||
| AGCR2512-XK-1800FT | VENKEL LTD | Auto Grade Resistor;2512;1W;�100PPM;180R;�1% RoHS : Compliant | 0 | |||
| HPTF1206-TP-2800CT | VENKEL LTD | High Power Thin Film CR;1206;1/4W;�5PPM;280R;�0.25% RoHS : Compliant | 0 | |||
| HPTF1206-UE-1800BT | VENKEL LTD | High Power Thin Film CR;1206;1/3W;�25PPM;180R;�0.1% RoHS : Compliant | 0 | |||
| HPTF1210-UC-1800UT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�50PPM;180R;�0.01% RoHS : Compliant | 0 | |||
| HPTF1210-UE-6800DT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�25PPM;680R;�0.5% RoHS : Compliant | 0 | |||
| HPTF1210-UN-6800CT | VENKEL LTD | High Power Thin Film CR;1210;1/3W;�10PPM;680R;�0.25% RoHS : Compliant | 0 | |||
| HPTF2010-UC-1800BT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�50PPM;180R;�0.1% RoHS : Compliant | 0 | |||
| HPTF2010-UP-2800FT | VENKEL LTD | High Power Thin Film CR;2010;1/3W;�5PPM;280R;�1% RoHS : Compliant | 0 | |||
| MELFC0102-RC-1800DT | VENKEL LTD | MELF Coated Thin Film CR;0102;1/8W;�50PPM;180R;�0.5% RoHS : Compliant | 0 | |||
| MELFC0204-ZP-2800CT | VENKEL LTD | MELF Coated Thin Film CR;0204;2/5W;�5PPM;280R;�0.25% RoHS : Compliant | 0 | |||
| MELFC0207-VC-2800CT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�50PPM;280R;�0.25% RoHS : Compliant | 0 | |||
| MELFC0207-VN-6800FT | VENKEL LTD | MELF Coated Thin Film CR;0207;1/2W;�10PPM;680R;�1% RoHS : Compliant | 0 | |||
 Wuhan P&S | 10098678-002C-TRLF | Amphenol FCi | SAS:29 Position Right Angle SM Plug RoHS : Compliant |
| 600 |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Russian ▼ 
English
Chinese
German
Japanese
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand