 |
поискавой системы для электроныых деталей |
|
|
поискавой системы для электроныых деталей |
|
7641ACPD дистрибьютор |
| дистрибьютор | номер детали | производитель | подробное описание детали | Price | Qty. BuyNow | |
 Avnet Americas | 10-497641-045 | Amphenol Corporation | - Bulk (Alt: 10-497641-045) RoHS : Not Compliant |
| 0 | |
| 1764190000 | Weidmüller Interface GmbH & Co. KG | - Bag (Alt: 1764190000) RoHS : Compliant |
| 0 | ||
| 5646764-1 | TE Connectivity | - Rail/Tube (Alt: 5646764-1) RoHS : Compliant |
| 0 | ||
| 10-551764-15P | Amphenol Corporation | - Bulk (Alt: 10-551764-15P) RoHS : Not Compliant |
| 0 | ||
| 1-1803764-1 | TE Connectivity | Anvil for Ocean Feed Applicator - Bag (Alt: 1-1803764-1) RoHS : Not Compliant |
| 0 | ||
| 3517/64(100'SF) | 3M Interconnect | 3517/64(100'SF) - Bulk (Alt: 7000057554) RoHS : Not Compliant |
| 0 | ||
| 2764130000 | Weidmüller Interface GmbH & Co. KG | - Bulk (Alt: 2764130000) RoHS : Not Compliant |
| 0 | ||
| 1901764-1 | TE Connectivity | - Bag (Alt: 1901764-1) RoHS : Compliant |
| 0 | ||
| AXE764127 | Panasonic Electronic Components | Conn Stacking RCP 64 POS 0.8mm Stack Height 0.35mm Solder ST SMD Emboss T/R - Tape and Reel (Alt: AXE764127) RoHS : Not Compliant |
| 0 | ||
| 39764-1012 | Molex | - Bulk (Alt: 0397641012) RoHS : Compliant | 0 | |||
| 76410-5604 | Molex | Backplane Connector 144 Position 1.9mm Right Angle Through Hole - Bulk (Alt: 0764105604) RoHS : Compliant |
| 0 | ||
| 44764-1201 | Molex | - Trays (Alt: 0447641201) RoHS : Compliant |
| 0 | ||
| 10-497641-055 | Amphenol Corporation | - Bulk (Alt: 10-497641-055) RoHS : Not Compliant |
| 0 | ||
| 76410-1804 | Molex | Backplane Connector, 72 Contacts, 9 Rows, Through Hole Mount, Right Angle, Impact 76410 Series, Gold - Trays (Alt: 0764101804) RoHS : Compliant |
| 0 | ||
| 9-2386764-1 | TE Connectivity | - Boxed Product (Development Kits) (Alt: 9-2386764-1) RoHS : Not Compliant |
| 0 | ||
 Newark | PAD002-T764113S | Bourns Inc | Pcb Transformer, Push-Pull, 3.1Kv; |Bourns, Inc. PAD002-T764113S RoHS : Compliant |
| 1,003 | |
| PAD002-T764113S | Bourns Inc | Pcb Transformer, Push-Pull, 3.1Kv; |Bourns, Inc. PAD002-T764113S RoHS : Compliant |
| 1,003 | ||
| 744764147 | Wurth Elektronik | Inductor, 47Uh, 10%, 0.06A, 15Mhz; |Würth Elektronik 744764147 RoHS : Compliant |
| 1,000 | ||
| 744764147 | Wurth Elektronik | Inductor, 47Uh, 10%, 0.06A, 15Mhz; |Würth Elektronik 744764147 RoHS : Compliant |
| 1,000 | ||
| 5555764-1 | TE Connectivity | Conn, Modular, 5555764-1; |Te Connectivity Amp 5555764-1 RoHS : Compliant |
| 555 | ||
| 6047.6414 | Schurter Electronic Components | Mains Power Cord Jis 8303 To Iec 320 C13; |Schurter 6047.6414 RoHS : Compliant |
| 420 | ||
| HW-06-20-T-D-764-166-LL | Samtec Inc | Conn Stack Brd, 2.54Mm, 12Pos, Hdr; |Samtec, Inc. HW-06-20-T-D-764-166-LL RoHS : Compliant |
| 311 | ||
| FMCA2764-150CM | Fairview Microwave Inc | Rf/Coaxial Cbl Assy, 4.9 Ft, 1.5M, Rg223; |Fairview Microwave FMCA2764-150CM RoHS : Not Compliant |
| 218 | ||
| MP007641 | SPC Multicomp | Circular Conn, Rcpt, 9Pos, Cable; |Multicomp Pro MP007641 RoHS : Compliant |
| 33 | ||
| 76410-1107 | Molex | Conn, Backplane, R/A Header, 90Pos, 9Row; |Molex 76410-1107 RoHS : Compliant |
| 16 | ||
| AAN76411745 | LG Corporation | Base Assembly |Lg AAN76411745 RoHS : Not Compliant |
| 3 | ||
| FMCA1764-100CM | Fairview Microwave Inc | Rf/Coaxial Cable Assembly; |Fairview Microwave FMCA1764-100CM RoHS : Not Compliant |
| 3 | ||
| MAX77641EVKIT# | Analog Devices Inc | Eval Bord, Multifunctin Power Management; |Analog Devices, Inc. MAX77641EVKIT# RoHS : Compliant |
| 2 | ||
| 7641 | 3M Interconnect | Safety-Walk Tub & Shower Treat 7641Na, 2; |3M 7641 RoHS : Not Compliant |
| 0 | ||
| 7641 | Lumberg Automation | Gan22Lu-V21-2120200/ Black; |Lumberg Automation 7641 RoHS : Not Compliant |
| 0 | ||
 RS | 7076414 | RS Pro | 10UF 250 VDC ALUMINUM ELECTROLYTIC CAPACITOR 1000H 10 (DIA.)X21MM |
| 135 | |
| 8T5HE/22-830/IF10/G/DIM 10/1 (476416) | Philips Semiconductors | LED BULB, 2FT T5, 8 WATTS, 3000 KELVIN, 1000 LUMENS, 120-277 VOLTS, UL TYPE A |
| 20 | ||
| 2907641 (TMC 81D 25A) | Phoenix Contact | CIRCUIT BREAKER THERMAL-MAGNETIC 1 POLE 25A D CURVE UL489 TMC 8 SERIES |
| 9 | ||
| 117641-51R | AMETEK Inc | WINDJAMMER BLOWER, CANISTER, 240VAC, 90CFM, DIA-IN 1.75, DIA-OUT 1.75 |
| 6 | ||
| 2576410 | RS Pro | PANEL TYPE FLOWMETER |
| 5 | ||
| 1447641 | RS Pro | CORDSET M8 FEMALE RIGHT ANGLE 3 WIRE/3 PIN SNAP TYPE 2M PVC BLACK |
| 4 | ||
| 2576413 | RS Pro | PANEL TYPE FLOWMETER |
| 3 | ||
| VAME-B10-20-A (576412) | Festo | MOUNTING BRACKET, FOOT, STEEL |
| 3 | ||
| VABB-B10-20-E (576410) | Festo | COVER PLATE, VABB-B10-20-E |
| 3 | ||
| AB7641-F | Hms Industrial Networks AB | ANYBUS MODBUS TCP/IP SLAVE TO MODBUS RTU SLAVE |
| 1 | ||
| 64197 (64197 CX/500) | HELUKABEL | FIVENORM H07V2-K GREEN 1C AWG8 |
| 1 | ||
| 64187 (64187 CX/500) | HELUKABEL | FIVENORM HOOK-UP WIRE, 8 AWG, H07V2-K, PVC BLACK, UL 1063 |
| 1 | ||
| M4C-187-7641 (170951) | Brady Worldwide Inc | PERMASLEEVE LOW SMOKE ZERO HALOGEN HEAT-SHRINK LABEL POLYOLEFIN 0.187"DIA BK/W |
| 1 | ||
| FLUKE-I2500-10 (3676410) | Fluke Calibration | PROBE I2500-10 IFLEX FLEXIBLE CURRENT PROBE |
| 1 | ||
| ADN-S-12-25-I-P-A (8076412) | Festo | CYLINDER, COMPACT, DBL ACT, SHORT, 12X25MM STROKE |
| 1 | ||
 Bisco Industries | WS1276415 | WASHERS | 5,025 | |||
| MS27641-10 | New Hampshire Ball Bearings Inc | 924 | ||||
| MS35764-1302 | MS Bolts | 75 | ||||
| MS27641-4G | RBC Bearings Incorporated | 25 | ||||
| 10-497641-045 | MISC. INDUSTRIAL CONNECTORS | 22 | ||||
| MS51576-41 | Indiana Aircraft Hardware | 17 | ||||
| MS35764-1251 | MS Bolts | 11 | ||||
| 6227641-1 | HellermannTyton | 9 | ||||
| MS27641-12 | Schatz Bearing Corporation | 5 | ||||
| MS27641-4 | MS Bearings/Bushings | 4 | ||||
| MS35764-1249 | MS Bolts | 2 | ||||
| MS27641-10 | MS Bearings/Bushings | 2 | ||||
| MS27641-6 | MS Bearings/Bushings | 1 | ||||
| MS27641-12 | MS Bearings/Bushings | 1 | ||||
| MS27641-8 | MS Bearings/Bushings | 1 | ||||
 Rochester Electronics | SAK-TC1764-128F80HLAA | Infineon Technologies AG | RISC FLASH Microcontroller, 32-Bit, TriCore CPU |
| 490 | |
AD7641BCPZ | Analog Devices Inc | IC ADC 1 CONV 18Bits SAR 2-Wire Serial, DSP, MICROWIRE, Parallel, QSPI, SPI 48-QFN Tray RoHS : Compliant |
| 10,616 | ||
ISO7641FMDW | Texas Instruments | Interface Circuit, PDSO16 RoHS : Compliant |
| 3 | ||
DAC7641YB/250 | Texas Instruments | D/A Converter, 1 Func, Parallel, Word Input Loading, 10us Settling Time, PQFP32 RoHS : Compliant |
| 24,230 | ||
| HUF76419S3ST | Fairchild Semiconductor Corporation | MOSFET N-Channel 60V 29A (Tc) TO-263-3 RoHS : Compliant |
| 41,739 | ||
| HUFA76419D3ST | Fairchild Semiconductor Corporation | MOSFET N-Channel 60V 20A (Tc) TO-252-3 T/R RoHS : Compliant |
| 471 | ||
EL7641AILTZ | Intersil Corporation | IC VOLT REG 5 OUT 5.5V - 20V 1.6A 32-QFN RoHS : Compliant |
| 3,374 | ||
EL7641ILTZ | Intersil Corporation | IC VOLT REG 5 OUT 2.99V - 18V 1.6A 32-QFN RoHS : Compliant |
| 2,291 | ||
ICL7641ECWE+ | Maxim Integrated Products | ICL7641 Quad Operational Amplifier RoHS : Compliant |
| 3,854 | ||
| M37641F8FP#U0 | Renesas Electronics Corporation | IC MCU 740 8Bit 1 Core FLASH 32kB (32k x 8) 24MHz 80-QFP RoHS : Compliant |
| 216 | ||
M37641F8HP | Renesas Electronics Corporation | IC MCU 740 8Bit 1 Core FLASH 32kB (32k x 8) 24MHz 80-QFP RoHS : Not Compliant |
| 734 | ||
R5S77641N300BG | Renesas Electronics Corporation | SH7764 - 8-bit Microcontrollers RoHS : Compliant |
| 2 | ||
| 7641DM/C | Rochester Electronics LLC | 7641DM/C RoHS : Not Compliant |
| 58 | ||
| SKY77641-21 | Skyworks Solutions Inc | RF Amplifier 42-SMD RoHS : Compliant | 4,277 | |||
| SKY77764-11 | Skyworks Solutions Inc | RF Amplifier 1.71GHz 1.785GHz 10-SMD RoHS : Compliant |
| 930 | ||
 Sager | 43764-1266 | OMRON Electronic Components | DIP Switches / SIP Switches QX cord,M12 12pin Plug ,DB9,1M | 0 | ||
| 2764179 | Phoenix Contact | Enclosures for Industrial Automation EG 45-A/ABS GN RoHS : Compliant |
| 0 | ||
| 1197641 | Phoenix Contact | Circular Metric Connectors SACB-C-H180- 6/3-M8 HD RoHS : Compliant |
| 0 | ||
| 0447641001 | Molex | Headers & Wire Housings MICRO-FIT 3.0 BMI HDR 2X5P RA RoHS : Compliant |
| 0 | ||
| 0764103608 | Molex | High Speed / Modular Connectors IMPACT HDR 3PR 16C 144P RA RoHS : Compliant |
| 0 | ||
| 0764105804 | Molex | High Speed / Modular Connectors 3P IMPACT RAM 8 COL RG ASSY RoHS : Compliant |
| 0 | ||
| 1-1803764-1 | TE Connectivity | TE Connectivity ANVIL, COMBINATION RoHS : Compliant |
| 0 | ||
| 1218764-1 | TE Connectivity | D-Sub MIL Spec Connectors RECP 109SZ 2 LP 11C1 RoHS : Compliant | 0 | |||
| FMBC-0937-6410 | Schurter Electronic Components | Power Line Filters FMBC Input filter 64A RoHS : Compliant |
| 0 | ||
| 0447641202 | Molex | Headers & Wire Housings MicroFit (3.0) BMI RA Hdr/Fem 15Au 12Ckt RoHS : Compliant |
| 0 | ||
| 1901764-1 | TE Connectivity | Bench Top Tools BOTTOM TUBE |
| 0 | ||
| AXE764127 | Panasonic Electronic Components | BOARD TO BOARD & MEZZANINE CONNECTORS RoHS : Compliant |
| 0 | ||
| 0447641201 | Molex | Headers & Wire Housings MICRO-FIT 3.0 BMI HDR 2X6P RA RoHS : Compliant |
| 0 | ||
| 0764103808 | Molex | High Speed / Modular Connectors RoHS : Compliant | 0 | |||
| 2348764-1 | TE Connectivity | HD MATENET 1+12 REC HSG ASSY, GRP E RoHS : Compliant | 0 | |||
 TME | 44764-1403 | Molex | Connector: wire-board; female; data; Inom: 5A,8.5A; 600V; PIN: 14 RoHS : Compliant |
| 800 | |
| 5555764-1 | TE Connectivity | Connector: RJ45; socket; data transfer; PIN: 8; Cat 3; low profile RoHS : Compliant |
| 561 | ||
| 1676417-1 | TE Connectivity | Resistor: thin film; 6.65kΩ; 2x1.25x0.55mm RoHS : Compliant |
| 250 | ||
| 19C050PG5K/SZ76415 | Honeywell Sensing and Control | 19C050PG5K/SZ76415 |
| 34 | ||
| 07.6411400 | Italtronic srl | Enclosure base; green; 140mm |
| 0 | ||
1764140000 | Weidmüller Interface GmbH & Co. KG | Marker: cable; 1.3÷3mm; PVC; transparent; CLI T; cables and wires RoHS : Compliant |
| 0 | ||
| 76410 | ProLinear/PONTECH Inc | Drill bit; for wood; Ø: 10mm; L: 400mm; Holder: SDS-Plus® |
| 0 | ||
| 1876410000 | Weidmüller Interface GmbH & Co. KG | Connector: PCB terminal block; power supply; OMNIMATE; 17.5A RoHS : Compliant |
| 0 | ||
| 76414-11G | KING TONY | Puncher; Ø: 14mm; Tool length: 350mm |
| 0 | ||
| 07.6410350 | Italtronic srl | Enclosure base; green; 35mm |
| 0 | ||
| 44764-1002 | Molex | Connector: wire-board; socket; female; data; Micro-Fit BMI; PIN: 10 RoHS : Compliant |
| 0 | ||
| 7641.350 | Rittal | Enclosure: rack mounting; Standard: 19"; 7U; W: 600mm; H: 380mm; grey |
| 0 | ||
| 76412-10G | KING TONY | Puncher; Ø: 12mm; Tool length: 290mm |
| 0 | ||
| 817641-SF | TE Connectivity | Inductor: wire with current compensation; THT; 2.2A; R: 100mΩ RoHS : Compliant |
| 0 | ||
| 2764111 | Phoenix Contact | Enclosure base; EG 45; grey; UL94HB; for DIN rail mounting; ABS RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | MSP430F67641AIPZR | Texas Instruments | RoHS : Compliant | 79,603 | ||
| ICL7641ECPD+ | Analog Devices Inc | IC OPAMP GP 1.4MHZ RRO 14DIP RoHS : Compliant | 2,534 | |||
| ISO7641FMDWR | Texas Instruments | RoHS : Compliant | 2,000 | |||
| ICL7641BMJD/HR | Analog Devices Inc | RoHS : Not Compliant | 747 | |||
 ComSIT USA | 744764122 | Wurth Electronics Midcom | AVAILABLE EU | 7,076 | ||
ComSIT USA | 1AJ067641D | ksd | QUARZ 6,76438 MHz SMD49 RoHS : Not Compliant | 2,000 | ||
| HUF76419S3STR4908 | onsemi | Electronic Component RoHS : Compliant | 1,117 | |||
| HUF76419D3S | Intersil Corporation | 20A, 60V, 0.043 OHM, N-CHANNEL, LOGIC LEVEL ULTRAFET POWER MOSFET Power Field-Effect Transistor, 20A I(D), 60V, 0.043ohm, 1-Element, N-Channel, Silicon, Metal-oxide Semiconductor FET, TO-252AA RoHS : Not Compliant | 750 | |||
| MSP430F67641AIPZR | Texas Instruments | POLYPHASE METERING SOC Microprocessor Circuit, CMOS, PQFP100 RoHS : Compliant | 325 | |||
| MSC7641134T4SDG6 | Microwave Semiconductor | Electronic Component RoHS : Not Compliant | 166 | |||
| ADUM7641CRQZ | Analog Devices Inc | 1 KV RMS SIX-CHANNEL DIGITAL ISOLATORS Interface Circuit, PDSO20 RoHS : Compliant | 102 | |||
| AD7641BCPZ | Analog Devices Inc | 18-BIT, 2 MSPS SAR ADC ADC, Successive Approximation, 18-Bit, 1 Func, 1 Channel, Serial, Parallel, Word Access, CMOS RoHS : Compliant | 98 | |||
| ICL7641CCWE | Maxim Integrated Products | QUAD OPERATIONAL AMPLIFIER Operational Amplifier, 4 Func, 12000uV Offset-Max, CMOS, PDSO16 RoHS : Not Compliant | 80 | |||
| AZ7641A24DE | ZETTLER Magnetics Inc | 20 AMP MINIATURE POWER SUPPLY Power/Signal Relay RoHS : Compliant | 49 | |||
| ICL7641ECPD | RCA | QUAD, LOW POWER CMOS OPERATIONAL AMPLIFIER Operational Amplifier, 4 Func, 25000uV Offset-Max, CMOS, PDIP14 RoHS : Not Compliant | 3 | |||
 Interstate Connecting Components | 2-2176414-5 | TE Connectivity | 7W STD M/OX 5% 200R RoHS : Compliant |
| 0 | |
| 2176415-1 | TE Connectivity | 8W STD M/OX 5% 30R RoHS : Compliant |
| 0 | ||
| 3-2176415-5 | TE Connectivity | 8W STD M/OX 5% 750R RoHS : Compliant |
| 0 | ||
| 5646764-1 | TE Connectivity | 2MM HM ASY,T-D,HDR,10R,220,AP RoHS : Compliant |
| 0 | ||
| 4-2176416-5 | TE Connectivity | 9W STD M/OX 5% 3K6 RoHS : Compliant |
| 0 | ||
| 3-2176412-0 | TE Connectivity | 5W XSM M/OX 5% 82R RoHS : Compliant |
| 0 | ||
| 3-2176416-6 | TE Connectivity | 9W STD M/OX 5% 1K5 RoHS : Compliant |
| 0 | ||
| 2-2176415-6 | TE Connectivity | 8W STD M/OX 5% 330R RoHS : Compliant |
| 0 | ||
| 2176411-7 | TE Connectivity | 1/2W SM M/OX 5% 20K RoHS : Compliant |
| 0 | ||
| 2176416-2 | TE Connectivity | 9W STD M/OX 5% 56R RoHS : Compliant |
| 0 | ||
| 2-2176415-7 | TE Connectivity | 8W STD M/OX 5% 360R RoHS : Compliant |
| 0 | ||
| 2176411-8 | TE Connectivity | 1/2W SM M/OX 5% 22K RoHS : Compliant |
| 0 | ||
| 2176416-3 | TE Connectivity | 9W STD M/OX 5% 62R RoHS : Compliant |
| 0 | ||
| 10-497641-045 | Amphenol Aerospace | SOCKET POWER CONTACTS JT-RE CONTACTS |
| 0 | ||
| 10-551764-15P | Amphenol Aerospace | RECEPT 10-551764-15P | 0 | |||
 PEI Genesis | 10-497641-045 | Amphenol Corporation |
| 0 | ||
| S2707-64-12 | SOURIAU-SUNBANK |
| 0 | |||
| 5176416-4 | SOURIAU-SUNBANK |
| 0 | |||
| 91-569764-18P | Amphenol Corporation |
| 0 | |||
| 5176416-3 | SOURIAU-SUNBANK |
| 0 | |||
| 88-569764-18S | Amphenol Corporation |
| 0 | |||
| 5176416-5 | SOURIAU-SUNBANK |
| 0 | |||
| 91-569764-15G | Amphenol Corporation |
| 0 | |||
| 88-569764-18P | Amphenol Corporation |
| 0 | |||
| 5176416-6 | SOURIAU-SUNBANK |
| 0 | |||
| A5764137 REV - | Amphenol PCD |
| 0 | |||
| SM-C-917641 | SOURIAU-SUNBANK |
| 0 | |||
| 5176416-1 | SOURIAU-SUNBANK |
| 0 | |||
| 10-497641-025 | Amphenol Corporation |
| 0 | |||
| 91-569764-19P | Amphenol Corporation |
| 0 | |||
 Richardson RFPD | SKY77641-21 | Skyworks Solutions Inc | RF Power Amplifier Module for LTE RoHS : Compliant | 0 | ||
AD7641BSTZRL | Analog Devices Inc | 1-Channel Single ADC SAR 2Msps 18-bit Parallel/Ser RoHS : Compliant |
| 0 | ||
| 1-2176415-1 | TE Connectivity | Res Metal Oxide 75 Ohm 5% 8W ±350ppm/C Epoxy Resin RoHS : Compliant | 0 | |||
| AD7641BCPZ | Analog Devices Inc | 1-Channel Single ADC SAR 2Msps 18-bit Parallel/Ser RoHS : Compliant |
| 0 | ||
| AD7641BSTZ | Analog Devices Inc | 1-Channel Single ADC SAR 2Msps 18-bit Parallel/Ser RoHS : Compliant |
| 0 | ||
| 47-6-41 | Spectrum Control | FIXED COAX ATTENUATR RoHS : Compliant |
| 0 | ||
| 1676415-2 | TE Connectivity | Res Thin Film 0805 6.34K Ohm 0.1% 0.1W(1/10W) ±10p RoHS : Compliant | 0 | |||
| LFXTAL076414 | IQD Frequency Products | LFXTAL076414REEL RoHS : Compliant | 0 | |||
| 935285764118 | NXP Semiconductors | I2C Repeater 1.8V/2.5V/3.3V/5V 8-Pin TSSOP T/R RoHS : Compliant | 0 | |||
| SI5335B-B07641-GMR | Skyworks Solutions Inc | Clock Generator 25MHz/27MHz-IN 200MHz-OUT 24-Pin Q RoHS : Compliant | 0 | |||
| SKY77764-11 | Skyworks Solutions Inc | Power Amplifier Module RoHS : Compliant |
| 0 | ||
| 4-2176412-0 | TE Connectivity | Circular Backshells RoHS : Compliant | 0 | |||
| SI5335B-B07641-GM | Skyworks Solutions Inc | Clock Generator 25MHz/27MHz-IN 200MHz-OUT 24-Pin Q RoHS : Compliant | 0 | |||
| 1676419-1 | TE Connectivity | Res Thin Film 0805 6.98K Ohm 0.1% 0.1W(1/10W) ±10p RoHS : Compliant | 0 | |||
| 1676413-2 | TE Connectivity | Res Thin Film 0805 6.04K Ohm 0.1% 0.1W(1/10W) ±10p RoHS : Compliant | 0 | |||
 Chip 1 Exchange | B37641-K7475-K62 | INSTOCK | 60,000 | |||
| B37641K7475K62V1 | TDK Electronics | INSTOCK | 21,000 | |||
| B37641K7475K-62-V1 | INSTOCK | 2,500 | ||||
| B37641K7475K62 | INSTOCK | 2,500 | ||||
| 447641402- | Molex | INSTOCK | 834 | |||
| 744764122- | Wurth Elektronik | INSTOCK | 688 | |||
| CXT6176 / 4144-002 | MtronPTI | INSTOCK | 480 | |||
| HMI7641-2 | INSTOCK | 451 | ||||
| ICL7641EMJD | Intersil Corporation | INSTOCK RoHS : Not Compliant | 250 | |||
| MDSTBV 2,5/ 3-G-5,08 GY / 1764125 | Phoenix Contact | INSTOCK | 38 | |||
| MDSTBV 2,5/ 2-G-5,08 GY /1764138 | Phoenix Contact | INSTOCK | 36 | |||
 Avnet Abacus | PAD002-T764113S | Bourns Inc | - Tape and Reel (Alt: PAD002-T764113S) RoHS : Compliant | 8,800 | ||
| 2764179 | Phoenix Contact | EG 45AABS GN EG45AABSGN (Alt: 2764179) RoHS : Compliant | 60 | |||
| 2764140 | Phoenix Contact | (Alt: 2764140) RoHS : Compliant | 30 | |||
| 1764112 | Phoenix Contact | MVSTBR 2515ST508 GY MVSTBR2515ST508GY (Alt: 1764112) RoHS : Compliant | 0 | |||
| 5646764-1 | TE Connectivity | (Alt: 5646764-1) RoHS : Compliant | 0 | |||
| 447641003 | Molex | Conn Wire to Board RCP 10 POS 3mm Solder RA ThruHole Tray (Alt: 447641003) RoHS : Compliant | 0 | |||
| 1676414-2 | TE Connectivity | SMD Chip Resistor 619 kOhm 01 100 mW 0805 2012 Metric Thin Film (Alt: 1676414-2) RoHS : Compliant | 0 | |||
| 1901764-1 | TE Connectivity | (Alt: 1901764-1) RoHS : Compliant | 0 | |||
| 2362764-1 | TE Connectivity | (Alt: 2362764-1) RoHS : Compliant | 0 | |||
| 6651764-1 | TE Connectivity | (Alt: 6651764-1) RoHS : Compliant | 0 | |||
| 764103107 | Molex | Conn Hard Metric HDR 90 POS 135mm Press Fit RA ThruHole Tray (Alt: 764103107) RoHS : Compliant | 0 | |||
| 1776412001 | Weidmüller Interface GmbH & Co. KG | Conn Shrouded Header HDR 7 POS 508mm Solder ST ThruHole Box (Alt: 1776412001) RoHS : Compliant | 0 | |||
| 1-1617641-5 | TE Connectivity | (Alt: 1-1617641-5) RoHS : Not Compliant | 0 | |||
| 9-2386764-1 | TE Connectivity | DT HIGHSPEED INLINERCONN KIT (Alt: 9-2386764-1) | 0 | |||
| FMBC-0937-6410 | Schurter Electronic Components | (Alt: FMBC-0937-6410) RoHS : Compliant | 0 | |||
Avnet Asia | 0764107618 | Molex | (Alt: 0764107618) RoHS : Compliant | 0 | ||
| 10131764-101LF | Amphenol Corporation | Conn Backplane RCP 200 POS Signal 1.2mm Signal Press Fit RA Thru-Hole (Alt: 10131764-101LF) RoHS : Compliant | 0 | |||
| SLG7NT47641V | Renesas Electronics Corporation | (Alt: SLG7NT47641V) RoHS : Compliant | 0 | |||
| 0447641602 | Molex | PCB Receptacle, 16 Contacts, 2 Rows, 3mm, Gold, 8.5A, THT, Right Angle, Phosphor Bronze, THT RA (Alt: 0447641602) RoHS : Compliant | 0 | |||
| 1-2176412-0 | TE Connectivity | Resistor, 12 Ohm, ? 5%, 5 W, Axial Leaded, Metal Oxide, Power Flame Proof (Alt: 1-2176412-0) RoHS : Compliant | 0 | |||
| 1-2176412-6 | TE Connectivity | Resistor Power Metal Oxide Film 22Ohm 5% 5W 2-Pin Through Hole Ammo Pack (Alt: 1-2176412-6) RoHS : Compliant | 0 | |||
| 0447641202 | Molex | PCB Receptacle, 12 Contacts, 2 Rows, 3mm, Gold, 8.5A, THT, Right Angle, Phosphor Bronze, Solder, LCP (Alt: 0447641202) RoHS : Compliant | 0 | |||
| 9-2176412-2 | TE Connectivity | B43541A9277M67 (Alt: 9-2176412-2) RoHS : Compliant | 0 | |||
| 0447641403 | Molex | PCB Receptacle, 14 Contacts, 2 Rows, 3mm, Gold, 8.5A, Female Receptacle, THT, Right Angle, Solder (Alt: 0447641403) RoHS : Compliant | 0 | |||
| 4-2176412-8 | TE Connectivity | METAL OXIDE RESISTORS 5W XSM M/OX 5 470R (Alt: 4-2176412-8) RoHS : Compliant | 0 | |||
| 2-2213764-1 | TE Connectivity | (Alt: 2-2213764-1) RoHS : Compliant | 0 | |||
 Component Electronics, Inc | B37641C8106K062 | TDK Corporation | IN STOCK SHIP TODAY |
| 464 | |
| 764-1-R15K | TT electronics / BI Technologies | IN STOCK SHIP TODAY | 463 | |||
| 764-1-R270 | TT electronics / BI Technologies | IN STOCK SHIP TODAY | 389 | |||
| ICL7641ECPD | Harris Semiconductor | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 125 | ||
| N74F1764-1A | Philips Semiconductors | IN STOCK SHIP TODAY RoHS : Not Compliant | 52 | |||
| MSM3764-15RS | OKI Electric Industry Co Ltd | IN STOCK SHIP TODAY | 33 | |||
| 764-1-R1.5K | TT electronics / BI Technologies | IN STOCK SHIP TODAY | 30 | |||
ICL7641ECPD | Intersil Corporation | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 28 | ||
| 2001-7641-02 | TE Connectivity | IN STOCK SHIP TODAY RoHS : Compliant |
| 10 | ||
| CBD21WA4M37S0T40-764.14 | Amphenol Positronic | IN STOCK SHIP TODAY | 3 | |||
| MS27641-6 | FAFNIR | IN STOCK SHIP TODAY |
| 2 | ||
 DB Roberts | 1337641 | Essentra Components | 0 | |||
| 20597641 | Essentra Components | M8X1 METRIC THRD PLUG FLAT WAS | 0 | |||
 Maritex | 2003-7641 | WAGO Innovative Connections | Installation terminal block; 3-level; through; 5-contacts for wire 0.25-4.0mm2 (22-12AWG); spring-loaded; grey; for DIN rail, 400V/24A RoHS : Compliant |
| 98 | |
| 917764-1 | TE Connectivity | Rectangular Connector Contacts; 917764-1; TE CONNECTIVITY; Tin; Crimp; 20 AWG; 22 AWG RoHS : Compliant |
| 92 | ||
 Master Electronics | 1764190000 | Weidmüller Interface GmbH & Co. KG | Cable coding system 2.5 - 5 mm 5 mm RoHS : Compliant |
| 5,000 | |
| 2-2176414-5 | TE Connectivity | 7W STD M/OX 5% 200R MOQ Reduction RoHS : Compliant |
| 0 | ||
| 2176415-1 | TE Connectivity | 8W STD M/OX 5% 30R MOQ Reduction RoHS : Compliant |
| 0 | ||
| 3-2176415-5 | TE Connectivity | 8W STD M/OX 5% 750R MOQ Reduction RoHS : Compliant |
| 0 | ||
| 5646764-1 | TE Connectivity | 2MM HM ASY T-D HDR 10R 220 AP MOQ Reduction RoHS : Compliant |
| 0 | ||
| 000676410 | ITT Interconnect Solutions | FRCIRG06-28-21S-F80-V0 RoHS : Not Compliant |
| 0 | ||
| 3-2176412-0 | TE Connectivity | 5W XSM M/OX 5% 82R RoHS : Compliant |
| 0 | ||
| 2-2176415-6 | TE Connectivity | 8W STD M/OX 5% 330R MOQ Reduction RoHS : Compliant |
| 0 | ||
| 2176411-7 | TE Connectivity | 1/2W SM M/OX 5% 20K RoHS : Compliant |
| 0 | ||
| 2764179 | Phoenix Contact | Housing cover for connection on both sides RoHS : Compliant |
| 0 | ||
| 2-2176415-7 | TE Connectivity | 8W STD M/OX 5% 360R MOQ Reduction RoHS : Compliant |
| 0 | ||
| 2176411-8 | TE Connectivity | 1/2W SM M/OX 5% 22K RoHS : Compliant |
| 0 | ||
| 1676412-1 | TE Connectivity | RN 0805 69R8 0.1% 10PPM CUT LENGTH RoHS : Compliant |
| 0 | ||
| 1197641 | Phoenix Contact | Connector hood with an integrated connector - for M8 sensor/actuator boxes with pluggable screw connection and six slots - single-occupancy RoHS : Compliant |
| 0 | ||
| 1-2176414-7 | TE Connectivity | 7W STD M/OX 5% 91R MOQ Reduction RoHS : Compliant |
| 0 | ||
 Pasternack Enterprises US | PE34764-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405FL, RF Cable Type: PE-SR405FL, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Male to SMB Plug Cable 12 Inch Length Using PE-SR405FL Coax., Radio frequency assembly SMA male to SMB plug cable 12 inch length using PE-SR405FL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA male to SMB plug cable 12 inch length using PE-SR405FL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMB cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA cable connection on one end and SMB cable connection on the other. Our SMA to SMB cable assemblies have a male gender on end 1 and plug on end 2. This SMA to SMB cable is a male to plug coax assembly, PE34764-12, can also be known as a SMA plug to SMB male cable assembly and will be shipped same-day as it is purchased. SMA plug to SMB male cable assembly PE34764-12 is built with PE-SR405FL which is a formable coax type. The Pasternack formable SMA cable assembly is manufactured with SMA to SMB cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this SMA male to SMB plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE34764-12 can also be used in the other direction and will be SMB plug to SMA male cable assembly if the opposite connectivity is required. SMA plug to SMB male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMB cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to SMB plug cable 12 inch length using PE-SR405FL coax. |
| 413 | |
| PE3C9764-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 10KV, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 10KV, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel Over Copper, RF Cable Part Number: RG303HV, RF Cable Type: RG303HV, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 10KV Male to 10KV Female Bulkhead Cable 12 Inch Length Using RG303HV Coax., Radio frequency assembly 10KV male to 10KV female bulkhead cable 12 inch length using RG303HV coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 10KV male to 10KV female bulkhead cable 12 inch length using RG303HV coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 10KV to 10KV cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with 10KV cable connection on one end and 10KV bulkhead cable connection on the other. Our 10KV to 10KV cable assembly has male gender on end 1 and female on end 2. PE3C9764-12 can also be known as a 10KV plug to 10KV jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has silver as cable inner conducting material and FEP dielectric type. We design our 10KV high voltage cable assemblies for applications, such as semiconductor fab and test and measurement. This cable assembly features materials that can withstand higher voltages, ensuring safety and preventing electrical breakdown. Pasternack designs 10KV high voltage RF cable assemblies to handle higher voltages and minimize the risk of electric shock. The connectors used in this cable assembly have voltage rating of 10kV and recessed contacts for additional safety. These cable assemblies are suitable for high voltage power supplies, amplifiers, nuclear instrumentation and test and measurement equipment where high voltage transmission and RF signal integrity are critical. This cable assembly employs durable and flexible materials, and with a 0.788 inches bend radius can withstand repetitive movements, ensuring reliable performance over extended periods. 10KV plug to 10KV jack cable assembly PE3C9764-12 is built with RG303HV which is a coax type. The Pasternack 10KV cable assembly is manufactured with 10KV to 10KV cable connectors, has a 50 Ohm impedance and is single shielded. This red RF cable assembly features 10,000 Vdc max DC voltage and has an FEP jacket with 0.169 inches diameter. Both the connectors have a crimp/solder attachment method and a brass body with nickel over copper plating. RF specs on this 10KV male to 10KV female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C9764-12 can also be used in the other direction and will be 10KV female bulkhead to 10KV male cable assembly if the opposite connectivity is required. 10KV plug to 10KV jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 10KV to 10KV cable assembly for quick shipment worldwide. Variations of 10KV cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 10KV male to 10KV female bulkhead cable 12 inch length using RG303HV coax. |
| 3 | ||
| PE3C10764-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. 1.85mm Male to 2.4mm Female Cable 18 Inch Length Using PE-SR405FLJ Coax., Pasternack’s PE3C10764-18 1.85mm male to 2.4mm female RF cable assembly using PE-SR405FLJ coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 2.4mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 2.4mm cable connection on the other. Our 1.85mm to 2.4mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10764-18 can also be known as a 1.85mm plug to 2.4mm jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10764-18 RF cable has an FEP jacket of 0.105-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. This PE3C10764-18 1.85mm plug to 2.4mm jack cable assembly is built with PE-SR405FLJ, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the clamp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 18-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10764-18 can also be used in the other direction and will be a 2.4mm female to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to 2.4mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 1.85mm and 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 2.4mm RF cable assembly as per your requirements. |
| 2 | ||
| PE3C10764-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.85mm, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: 2.4mm, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Beryllium Copper, Connector 1 Body Plating: Gold over Nickel, RF Cable Part Number: PE-SR405FLJ, RF Cable Type: PE-SR405FLJ, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. 1.85mm Male to 2.4mm Female Cable 12 Inch Length Using PE-SR405FLJ Coax., Pasternack’s PE3C10764-12 1.85mm male to 2.4mm female RF cable assembly using PE-SR405FLJ coax is part of one of the largest selections of same-day ship coaxial cables for RF, microwave, and millimeter wave interconnect solutions. These coaxial cable assembly products are used in applications requiring high quality, such as laboratory RF test and measurement, defense/military, telecom antenna tower component jumper connection, production environments, general use, etc. The 1.85mm male to 2.4mm female cable, like our other Pasternack coaxial cable assemblies, will ship the same day, and any custom 1.85mm to 2.4mm cable assembly orders will ship the same business day as well. Pasternack RF coax cable assembly is built with a 1.85mm cable connection on one end and a 2.4mm cable connection on the other. Our 1.85mm to 2.4mm cable assembly has a male gender on end 1 and a female on end 2. PE3C10764-12 can also be known as a 1.85mm plug to 2.4mm jack cable assembly and will be shipped the same day as it is purchased. This formable RF cable assembly with a 0.5-inch diameter has copper clad steel as the cable’s inner conducting material and PTFE dielectric type. This cable assembly employs durable and flexible materials, and with a 0.787-inch bend radius, it can withstand repetitive movements, ensuring reliable performance over extended periods. Our PE3C10764-12 RF cable has an FEP jacket of 0.105-inch diameter. The formable RF cable has a between series connection. This cable assembly has a typical propagation velocity of 69.5% and a minimum RF shielding of 100 dB. This PE3C10764-12 1.85mm plug to 2.4mm jack cable assembly is built with PE-SR405FLJ, which is a formable coax type. The Pasternack formable 1.85mm cable assembly is manufactured with 1.85mm to 2.4mm cable connectors, has a 50 Ohm impedance, and is single shielded. One connector features the solder attachment method and a beryllium copper body with gold over nickel plating, while the other has the clamp/solder attachment method. Additional dimensions, specifications, and CAD drawings for this 12-inch-long RF cable are available on our downloadable PDF datasheet. PE3C10764-12 can also be used in the other direction and will be a 2.4mm female to 1.85mm male cable assembly if the opposite connectivity is required. This 1.85mm plug to 2.4mm jack cable assembly is just one of more than one million in-stock RF products available. Pasternack is where to buy a high quality 1.85mm to 2.4mm cable assembly for quick shipment worldwide. Variations of 1.85mm and 2.4mm cable assemblies can also be built and will ship on the same day as well, search this website or contact us for assistance. High-quality custom RF cable assembly products for microwave and millimeter wave radio transmitters, receivers, antenna jumpers, component interconnections, RF test and measurement labs, military/defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment, and other radio frequency applications can be manufactured. For further information on similar products, our expert technical support and trained sales team can get you the ideal 1.85mm to 2.4mm RF cable assembly as per your requirements. |
| 2 | ||
| PE3W07641 | Pasternack Enterprises | Key Specifications, Connector Series 1: C, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: 7/16 DIN, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG393/U, RF Cable Type: RG393, RF Cable Impedance: 50 Ohm. C Male Right Angle to 7/16 DIN Female Cable Using RG393 Coax. PE3W07641 is a C male right angle to 7/16 DIN female cable using RG393 coax. This Pasternack C male right angle to 7/16 DIN female cable assembly uses a 50 Ohm C for connector 1 and a 50 Ohm 7/16 DIN for connector 2. C right angle to 7/16 DIN coaxial cable assembly uses 90 degree right angle coax cable connector. Our male C right angle to female 7/16 DIN cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W07641 C male right angle to 7/16 DIN female cable assembly is constructed with RG393 coax. | 0 | |||
| PE3W17641/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: Mini SMP, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Right Angle, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMB, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm. Mini SMP Female Right Angle to SMB Plug Cable Using PE-SR405AL Coax with HeatShrink. PE3W17641/HS is a Mini SMP female right angle to SMB plug cable using PE-SR405AL coax. This Pasternack Mini SMP female right angle to SMB plug cable assembly uses a 50 Ohm Mini SMP for connector 1 and a 50 Ohm SMB for connector 2. Mini SMP right angle to SMB coaxial cable assembly uses 90 degree right angle coax cable connector. Our female Mini SMP right angle to plug SMB cable assembly uses a semi-rigid cable type that is 50 Ohm. Pasternack PE3W17641/HS Mini SMP female right angle to SMB plug cable assembly is constructed with PE-SR405AL coax. | 0 | |||
| PE3C7641LF/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. Snap-On QMA Male to SMA Male Cable Using LMR-200 Coax with HeatShrink, LF Solder. PE3C7641LF/HS is a QMA male to SMA male cable using LMR-200 coax. This Pasternack QMA male to SMA male cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm SMA for connector 2. Our male QMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C7641LF/HS QMA male to SMA male cable assembly is constructed with LMR-200 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3C7641/HS | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. Snap-On QMA Male to SMA Male Cable Using LMR-200 Coax with HeatShrink. PE3C7641/HS is a QMA male to SMA male cable using LMR-200 coax. This Pasternack QMA male to SMA male cable assembly uses a 50 Ohm QMA for connector 1 and a 50 Ohm SMA for connector 2. Our male QMA to male SMA cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3C7641/HS QMA male to SMA male cable assembly is constructed with LMR-200 coax, * LMR™ is a trademark of Times Microwave Systems. | 0 | |||
| PE3W09764-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. SMA Female 4 Hole Flange to SMP Female Cable 12 Inch Length Using PE-SR405AL Coax., Radio frequency assembly SMA female 4 hole flange to SMP female cable 12 inch length using PE-SR405AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female 4 hole flange to SMP female cable 12 inch length using PE-SR405AL coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA 4 hole flange cable connection on one end and SMP cable connection on the other. Our SMA to SMP cable assemblies have a female gender on end 1 and female on end 2. PE3W09764-12 can also be known as a SMA jack to SMP jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMP jack cable assembly PE3W09764-12 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 4 hole flange to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09764-12 can also be used in the other direction and will be SMP female to SMA female 4 hole flange cable assembly if the opposite connectivity is required. SMA jack 4 hole flange to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 4 hole flange to SMP female cable 12 inch length using PE-SR405AL coax. |
| 0 | ||
| PE33764-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: MCX, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Right Angle, Connector 1 Impedance: 50 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. MCX Plug Right Angle to BNC Female Bulkhead Cable 12 Inch Length Using RG316 Coax., Radio frequency assembly MCX plug right angle to BNC female bulkhead cable 12 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The MCX plug right angle to BNC female bulkhead cable 12 inch length using RG316 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom MCX to BNC cable assembly orders will ship same business day as well. Pasternack RF coax cable assembly is built with right angle MCX cable connection on one end and BNC bulkhead cable connection on the other. Our right angle MCX to BNC cable assembly has plug gender on end 1 and female on end 2. PE33764-12 can also be known as a right angle MCX male to BNC jack cable assembly and will be shipped same-day as it is purchased. This RF cable assembly with 0.5 inches diameter has copper clad steel as cable inner conducting material and PTFE dielectric type. MCX male to BNC jack cable assembly PE33764-12 is built with RG316 which is a flexible coax type. The Pasternack flexible MCX cable assembly is manufactured with right angle MCX to BNC cable connectors, has a 50 Ohm impedance and is single shielded. Both the connectors have a crimp/solder attachment method and a brass body with nickel plating. Additional dimensions, specifications and CAD drawings for this PE33764-12 RF cable are available on our downloadable PDF datasheet.PE33764-12 can also be used in the other direction and will be BNC female bulkhead to right angle MCX plug cable assembly if the opposite connectivity is required. MCX right angle male to BNC jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality MCX to BNC cable assembly for quick shipment worldwide. Variations of MCX cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured.For further information on similar products, our expert technical support and trained sales team can get you the ideal MCX RF cable assembly as per your requirements. |
| 0 | ||
| PE3764-12 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401AL-STRAIGHT, RF Cable Type: PE-SR401AL-STRAIGHT, RF Cable Impedance: 50 Ohm, Length: 12 inches. SMA Female Bulkhead to SMA Female Bulkhead Cable 12 Inch Length Using PE-SR401AL Coax., Radio frequency assembly SMA female bulkhead to SMA female bulkhead cable 12 inch length using PE-SR401AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to SMA female bulkhead cable 12 inch length using PE-SR401AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and SMA bulkhead cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE3764-12, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE3764-12 is built with PE-SR401AL-STRAIGHT which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female bulkhead to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack bulkhead to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to SMA female bulkhead cable 12 inch length using PE-SR401AL coax. |
| 0 | ||
| PE3C7641 | Pasternack Enterprises | Key Specifications, Connector Series 1: QMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-200, RF Cable Type: LMR-200, RF Cable Impedance: 50 Ohm. | 0 | |||
| PE3764-18 | Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Female, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SMA, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-SR401AL-STRAIGHT, RF Cable Type: PE-SR401AL-STRAIGHT, RF Cable Impedance: 50 Ohm, Length: 18 inches. SMA Female Bulkhead to SMA Female Bulkhead Cable 18 Inch Length Using PE-SR401AL Coax., Radio frequency assembly SMA female bulkhead to SMA female bulkhead cable 18 inch length using PE-SR401AL coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. SMA female bulkhead to SMA female bulkhead cable 18 inch length using PE-SR401AL coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA bulkhead cable connection on one end and SMA bulkhead cable connection on the other. Our SMA to SMA cable assemblies have a female gender on end 1 and female on end 2. This SMA to SMA cable is a female to female coax assembly, PE3764-18, can also be known as a SMA jack to SMA jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMA jack cable assembly PE3764-18 is built with PE-SR401AL-STRAIGHT which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female bulkhead to SMA female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. SMA jack bulkhead to SMA jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMA cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female bulkhead to SMA female bulkhead cable 18 inch length using PE-SR401AL coax. |
| 0 | ||
| PE3W09764-18 | Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Female, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: 4 Hole Flange, Connector 1 Impedance: 50 Ohm, Connector 2 Series: SMP, Connector 2 Gender: Female, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Stainless Steel, Connector 1 Body Plating: Gold, RF Cable Part Number: PE-SR405AL, RF Cable Type: PE-SR405AL, RF Cable Impedance: 50 Ohm, Length, Max: 18 inches. SMA Female 4 Hole Flange to SMP Female Cable 18 Inch Length Using PE-SR405AL Coax., Radio frequency assembly SMA female 4 hole flange to SMP female cable 18 inch length using PE-SR405AL coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The SMA female 4 hole flange to SMP female cable 18 inch length using PE-SR405AL coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to SMP cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with SMA 4 hole flange cable connection on one end and SMP cable connection on the other. Our SMA to SMP cable assemblies have a female gender on end 1 and female on end 2. PE3W09764-18 can also be known as a SMA jack to SMP jack cable assembly and will be shipped same-day as it is purchased. SMA jack to SMP jack cable assembly PE3W09764-18 is built with PE-SR405AL which is a semi-rigid coax type. The Pasternack semi-rigid SMA cable assembly is manufactured with SMA to SMP cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 18 GHz maximum frequency SMA female 4 hole flange to SMP female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W09764-18 can also be used in the other direction and will be SMP female to SMA female 4 hole flange cable assembly if the opposite connectivity is required. SMA jack 4 hole flange to SMP jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to SMP cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA female 4 hole flange to SMP female cable 18 inch length using PE-SR405AL coax. |
| 0 | ||
| PE3C7764-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: FAKRA, Connector 1 Gender: Plug, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: FAKRA, Connector 2 Gender: Jack, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Plastic, RF Cable Part Number: RG316/U, RF Cable Type: RG316, RF Cable Impedance: 50 Ohm, Length, Max: 12 inches. Black FAKRA Plug to FAKRA Jack Cable 12 Inch Length Using RG316 Coax., Radio frequency assembly black FAKRA plug to FAKRA jack cable 12 inch length using RG316 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The Black FAKRA plug to FAKRA jack cable 12 inch length using RG316 coax, FAKRA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom FAKRA to FAKRA cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with FAKRA cable connection on one end and FAKRA cable connection on the other. Our FAKRA to FAKRA cable assemblies have a plug gender on end 1 and jack on end 2. PE3C7764-12 can also be known as a FAKRA male to FAKRA female cable assembly and will be shipped same-day as it is purchased. FAKRA male to FAKRA female cable assembly PE3C7764-12 is built with RG316 which is a flexible coax type. The Pasternack flexible FAKRA cable assembly is manufactured with FAKRA to FAKRA cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 3 GHz maximum frequency FAKRA plug to FAKRA jack cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C7764-12 can also be used in the other direction and will be FAKRA jack to FAKRA plug cable assembly if the opposite connectivity is required. FAKRA male to FAKRA female cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality FAKRA to FAKRA cable assembly for quick shipment worldwide. Variations of FAKRA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this black FAKRA plug to FAKRA jack cable 12 inch length using RG316 coax. |
| 0 | ||
 Vyrian | 2764111 | Phoenix Contact | Enclosures/Accessories RoHS : Compliant | 13,344 | ||
| AD7641BSTZ1 | Analog Devices Inc | ADC, Successive Approximation RoHS : Compliant | 11,991 | |||
| AD7641BCPZ1 | Analog Devices Inc | ADC, Successive Approximation RoHS : Compliant | 11,610 | |||
| ICL7641BMJD/HR | Analog Devices Inc | Operational Amplifier, 1 Func, 7000uV Offset-Max, CMOS, CDIP14 RoHS : Not Compliant | 11,390 | |||
| 2764179 | Phoenix Contact | Enclosures/Accessories RoHS : Compliant | 10,752 | |||
| 2764182 | Phoenix Contact | Enclosures/Accessories RoHS : Compliant | 9,559 | |||
| AD7641BCPZRL | Analog Devices Inc | ADC, Successive Approximation, 18-Bit, 1 Func, 1 Channel, Serial, Parallel, Word Access, CMOS RoHS : Compliant | 9,419 | |||
| ICL7641CCPD+ | Analog Devices Inc | Operational Amplifier, 4 Func, 12000uV Offset-Max, CMOS, PDIP14 RoHS : Compliant | 8,531 | |||
MSP430F67641IPZ | Texas Instruments | Microprocessor Circuit, CMOS, PQFP100 RoHS : Compliant | 7,765 | |||
| HMC7641LP5E | Analog Devices Inc | 7,621 | ||||
| ICL7641CC/D | Analog Devices Inc | Operational Amplifier, 4 Func, 15000uV Offset-Max, CMOS RoHS : Not Compliant | 7,462 | |||
| 2764108 | Phoenix Contact | Enclosures/Accessories RoHS : Compliant | 7,344 | |||
| ICL7641BCWE | Maxim Integrated Products | Operational Amplifier, 4 Func, 7000uV Offset-Max, CMOS, PDSO16 RoHS : Not Compliant | 6,586 | |||
| AD7641BSTZRL | Analog Devices Inc | ADC, Successive Approximation, 18-Bit, 1 Func, 1 Channel, Serial, Parallel, Word Access, CMOS, PQFP48 RoHS : Compliant | 5,882 | |||
| MSP430F67641APN | Texas Instruments | Microprocessor Circuit, CMOS, PQFP80 | 3,470 | |||
 Win Source Electronics | ISO7641FMDW | Texas Instruments | Low Power Quad Channels Digital Isolators | DGTL ISO 4.243KV GEN PURP 16SOIC RoHS : Compliant |
| 20,000 | |
| ISO7641FMDWR | Texas Instruments | Low Power Quad Channels Digital Isolators RoHS : Compliant |
| 18,700 | ||
ISO7641FCDW | Texas Instruments | Low Power Triple and Quad Channels Digital Isolators RoHS : Compliant |
| 8,328 | ||
| ISO7641FCDWR | Texas Instruments | DGTL ISO 2.5KV GEN PURP 16SOIC RoHS : Compliant |
| 7,910 | ||
| ADUM7641CRQZ-RL7 | Analog Devices Inc | 1 kV RMS Six-Channel Digital Isolators | DGTL ISO 1KV 6CH GEN PURP 20QSOP RoHS : Compliant |
| 5,000 | ||
| ADUM7641CRQZ | Analog Devices Inc | 1 kV RMS Six-Channel Digital Isolators | DGTL ISO 1KV 6CH GEN PURP 20QSOP RoHS : Compliant |
| 5,000 | ||
| ADUM7641ARQZ | Analog Devices Inc | DGTL ISO 1000VRMS 6CH GP 20QSOP RoHS : Compliant |
| 1,500 | ||
| ADUM7641ARQZ-RL7 | Analog Devices Inc | DGTL ISO 1000VRMS 6CH GP 20QSOP / General Purpose Digital Isolator 1000Vrms 6 Channel 1Mbps 15kV/µs CMTI 20-SSOP (0.154", 3.90mm Width) RoHS : Compliant |
| 1,430 | ||
| AD7641BSTZ | Analog Devices Inc | IC ADC 18BIT 2MSPS SAR 48-LQFP RoHS : Compliant |
| 141 | ||
| AD7641BSTZRL | Analog Devices Inc | IC ADC 18BIT SAR 48LQFP / 18 Bit Analog to Digital Converter 1 Input 1 SAR 48-LQFP (7x7) RoHS : Compliant |
| 130 |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Russian ▼ 
English
Chinese
German
Japanese
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand