 |
поискавой системы для электроныых деталей |
|
|
поискавой системы для электроныых деталей |
|
75G-P-T92-R дистрибьютор |
| дистрибьютор | номер детали | производитель | подробное описание детали | Price | Qty. BuyNow | |
 Master Electronics | 66C3175G02 | Eaton Cutler-Hammer | CB Pad lock BRKT Faz-Type. RoHS : Compliant |
| 56 | |
| MT0075G | Siemens | CONTROL TRANSFORMER 75VA 2 RoHS : Compliant |
| 1 | ||
| IDSD-05-S-03.75-G-ST4 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| IDSD-07-D-15.75-G | Samtec Inc | Ribbon Cables / IDC Cables Slim Body Double-Row IDC Socket Assemblies 0.100 Pitch RoHS : Compliant |
| 0 | ||
| IDSS-12-D-04.75-G-R | Samtec Inc | .100 Slim Body Single Row IDC Ribbon Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| IDMD-10-T-06.75-G-RW | Samtec Inc | .100 Slim Body Double Row IDC Ribbon Cable Assembly Terminal RoHS : Compliant |
| 0 | ||
| GRFT75-G | Thomas & Betts | OUTLET BOX FORM T 3/4IN AL RoHS : Compliant |
| 0 | ||
| APT75GH120J | Microchip Technology Inc | IGBT FAST Fieldstop Low Frequency Single 1200 V 75 A SOT-227 RoHS : Compliant |
| 0 | ||
| ZSTMM-110-75-G-D-280 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ZSTMM-120-75-G-D-250 | Samtec Inc | 2.00 MM SHROUDED VARIABLE RoHS : Compliant |
| 0 | ||
| IDMS-05-S-02.75-G-ST8 | Samtec Inc | .100 Slim Body Single Row IDC Ribbon Cable Assembly Terminal RoHS : Compliant |
| 0 | ||
| IDSD-13-D-07.75-G | Samtec Inc | RoHS : Compliant |
| 0 | ||
| IDSD-20-D-05.75-G | Samtec Inc | .100 Slim Body Double Row IDC Ribbon Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| OL75G5E-R52 | Ohmite Mfg Co | Carbon Film Resistor - Axial - Through Hole - 7.5 ohm (+/-) 5% - 1/2W - 350V Max - (+/-) 350 ppm/°C - RoHS - Tape&Reel RoHS : Compliant |
| 0 | ||
| LH75G | Thomas & Betts | Carlon® Cord Grip - Straight - NPT Thread Size 3/4 Inch - Nylon - Gray - IP68 RoHS : Compliant |
| 0 | ||
 Avnet Americas | CR0402-JW-475GLF | Bourns Inc | - Tape and Reel (Alt: CR0402-JW-475GLF) RoHS : Compliant |
| 50,000 | |
74LVC1G175GW,125 | Nexperia | Flip-Flop, Non Inverted, Positive Edge, 74LVC1G175, D, 300 MHz, 50 mA, SC-88 - Tape and Reel (Alt: 74LVC1G175GW,125) RoHS : Compliant |
| 45,000 | ||
| 74LVC1G175GW-Q100H | Nexperia | - Tape and Reel (Alt: 74LVC1G175GW-Q100H) RoHS : Compliant |
| 39,000 | ||
| MP4575GF-P | Monolithic Power Systems | - Tape and Reel (Alt: MP4575GF-P) RoHS : Compliant |
| 5,500 | ||
| NGCL1206UG1R575G1TRF | NIC Components Corp | GNSS (L1) - Tape and Reel (Alt: NGCL1206UG1R575G1TRF) RoHS : Not Compliant |
| 5,000 | ||
| NGCL1206UV1R575G2TRF | NIC Components Corp | - Tape and Reel (Alt: NGCL1206UV1R575G2TRF) RoHS : Not Compliant |
| 5,000 | ||
74AUP1G175GM,115 | Nexperia | Flip Flop, 74AUP1G175, D, 5.7 ns, 615 MHz, 4 mA, 6 Pins, XSON - Tape and Reel (Alt: 74AUP1G175GM,115) RoHS : Compliant |
| 5,000 | ||
| 74AUP1G175GW,125 | Nexperia | Flip Flop, 74AUP1G175, D, 5.7 ns, 615 MHz, 4 mA, 6 Pins, TSSOP - Tape and Reel (Alt: 74AUP1G175GW,125) RoHS : Compliant |
| 3,000 | ||
| NGRL1032UG1R575G1TRF | NIC Components Corp | GNSS (L1) - Tape and Reel (Alt: NGRL1032UG1R575G1TRF) RoHS : Not Compliant |
| 2,000 | ||
BSP75GTA | Diodes Incorporated | - Tape and Reel (Alt: BSP75GTA) RoHS : Compliant |
| 2,000 | ||
| NGRV5030UG1R575G1TRF | NIC Components Corp | GNSS (L1) - Tape and Reel (Alt: NGRV5030UG1R575G1TRF) RoHS : Not Compliant |
| 1,500 | ||
| SCT011H75G3AG | STMicroelectronics | Silicon Carbide MOSFET, Single, N Channel, 110 A, 750 V, 0.015 ohm, H2PAK - Tape and Reel (Alt: SCT011H75G3AG) RoHS : Not Compliant |
| 152 | ||
| RE75G24R9C02 | Vishay Intertechnologies | - Bulk (Alt: RE75G24R9C02) RoHS : Not Compliant |
| 9 | ||
| R75GF3150DQ00K | KEMET Corporation | 0,15 U 160V - Tape and Reel (Alt: R75GF3150DQ00K) RoHS : Compliant |
| 0 | ||
| NB675GL-Z | Monolithic Power Systems | Conv DC-DC Single Step Down 5V 22V 21-Pin QFN EP T/R - Tape and Reel (Alt: NB675GL-Z) RoHS : Compliant | 0 | |||
 Newark | 74LVC1G175GW,125 | Nexperia | Flip-Flop, D-Type, 200Mhz, Sc-88-6; |Nexperia 74LVC1G175GW,125 RoHS : Compliant |
| 2,069 | |
| 74LVC1G175GW,125 | Nexperia | Flip-Flop, D-Type, 200Mhz, Sc-88-6; |Nexperia 74LVC1G175GW,125 RoHS : Compliant |
| 2,069 | ||
| R75GI3390AA00J | KEMET Corporation | Cap, 0.39Uf, 5%, 90Vac/160Vdc, Radial; |Kemet R75GI3390AA00J RoHS : Compliant |
| 980 | ||
| BSP75GQTA | Diodes Incorporated | Power Load Sw, Low Side, 3A, 150Deg C; |Diodes Inc. BSP75GQTA RoHS : Compliant |
| 630 | ||
| BSP75GQTA | Diodes Incorporated | Power Load Sw, Low Side, 3A, 150Deg C; |Diodes Inc. BSP75GQTA RoHS : Compliant |
| 630 | ||
| R75GF310050H3J | KEMET Corporation | Cap, Aec-Q200, 0.1Uf, 160V, Film; Dielectric Type:Metallized Pp; Capacitor Case/Package:Radial Box - 2 Pin; Capacitance:0.1Μf; Capacitance Tolerance:± 5%; Typical Applications:High Frequency; Capacitor Mounting:Through Hole Rohs Compliant: Yes RoHS : Compliant |
| 389 | ||
| IDWD75G120C5XKSA1 | Infineon Technologies AG | Sic Schottky Diode, 1.2Kv, 75A, To-247; |Infineon Technologies IDWD75G120C5XKSA1 RoHS : Compliant |
| 177 | ||
| PCM 100/75 G ENCLOSURE | FIBOX | Box, Polycarbonate, 130X80X75Mm; |Fibox PCM 100/75 G ENCLOSURE RoHS : Compliant |
| 118 | ||
| B66375G0000X195 | TDK Corporation | Transformer Core, E80/38/20, N95, 184Mm; |Tdk B66375G0000X195 RoHS : Compliant |
| 102 | ||
| IHLP7575GZER3R3M5A | Vishay Intertechnologies | Inductor, 3.3Uh, Shielded, 36A; |Vishay IHLP7575GZER3R3M5A RoHS : Compliant |
| 93 | ||
| IHLP7575GZER1R0M5A | Vishay Intertechnologies | Inductor, 1Uh, Shielded, 55A; |Vishay IHLP7575GZER1R0M5A RoHS : Compliant |
| 6 | ||
| R75GI368050H0J | KEMET Corporation | Cap, Aec-Q200, 0.68Uf, 160V, Film; |Kemet R75GI368050H0J RoHS : Compliant |
| 4 | ||
| RGC2P60CM75GEN | Carlo Gavazzi Holding AG | Solid State Contactor, 2P, 75A/73-660Vac; Load Current:75A; Operating Voltage Max:660Vac; Control Voltage Max:32Vdc; Switching Mode:Proportional Output; Contactor Mounting:Din Rail; Contactor Terminals:Box Clamp Rohs Compliant: Yes RoHS : Compliant |
| 3 | ||
| RGC2A60D75GGEDFM | Carlo Gavazzi Holding AG | Solid State Contactor, 75A, 5 To 32Vdc; Load Current:75A; Operating Voltage Max:660Vac; Control Voltage Max:32Vdc; Switching Mode:Zero Crossing; Contactor Mounting:Din Rail; Contactor Terminals:Box Clamp; Operating Voltage Min:90Vac Rohs Compliant: Yes RoHS : Compliant |
| 3 | ||
| FMCA2675/GR-12 | Fairview Microwave Inc | Cbl Assy, Bnc Plug-1.0/2.3 Plug, 12"; |Fairview Microwave FMCA2675/GR-12 RoHS : Not Compliant |
| 1 | ||
 Analog Devices Inc | DS2775G+T&R | Analog Devices Inc | 2-Cell, Stand-Alone, Li+ Fuel- RoHS : Compliant | 20,000 | ||
| MAX77675GEWE+T | Analog Devices Inc | Nano Power PMIC with 4-Output |
| 14,000 | ||
| MAX9275GTN/V+ | Analog Devices Inc | 3.12Gbps GMSL Serializers for RoHS : Compliant |
| 3,531 | ||
| MAX17075GTG/V+T | Analog Devices Inc | Boost Reg w/Integrated Charge RoHS : Compliant |
| 2,500 | ||
| DS2775G+ | Analog Devices Inc | 2-Cell, Stand-Alone, Li+ Fuel- RoHS : Compliant |
| 1,727 | ||
OP275GSZ | Analog Devices Inc | DUAL BUTLER AMPLIFIER IC RoHS : Compliant |
| 953 | ||
| OP275GSZ-REEL7 | Analog Devices Inc | DUAL BUTLER AMPLIFIER IC RoHS : Compliant |
| 874 | ||
| MAX9275GTN+ | Analog Devices Inc | 3.12Gbps GMSL Serializer for C RoHS : Compliant |
| 665 | ||
| MAX9275GTN/V+T | Analog Devices Inc | 3.12Gbps GMSL Serializers for RoHS : Compliant |
| 370 | ||
| OP275GSZ-REEL | Analog Devices Inc | DUAL BUTLER AMPLIFIER IC RoHS : Compliant |
| 31 | ||
| MAX17075GTG/V+ | Analog Devices Inc | Boost Reg w/Integrated Charge RoHS : Compliant |
| 12 | ||
| MAX9275GTN+T | Analog Devices Inc | 3.12Gbps GMSL Serializer for C RoHS : Compliant |
| 0 | ||
OP275GPZ | Analog Devices Inc | DUAL BUTLER AMPLIFIER IC RoHS : Compliant |
| 0 | ||
 RS | PUN-4X0,75-GE (178417) | Festo | TUBING, PLASTIC, YELLOW, 1 EA1 METER, 50M LENGTH, 4MMOD, TUV |
| 250 | |
| LH75G | T&B Fittings | CORD GRIP, NPT THREADS, LOCKNUT INCLUDED, 3/4 INCH, IP68 RATING, NYLON, GRAY |
| 110 | ||
| 2456457 (25530703) (CAI20310075G-100RS) | RS Pro | 5/16-18 X 3/4 IN CARRIAGE BOLT, GRADE A, GALVANIZED, COARSE |
| 10 | ||
| 1411175 (G-INS-PG21-M68N-NNES-S) | Phoenix Contact | CABLE GLAND;0.51" -~ 0.71" -(13.0MM ~ 18.0MM);PG21;BRASS/NICKEL;SILVER;IP68/6 |
| 8 | ||
| 2456757 (25530441) (HCI20310075G-100RS) | RS Pro | 5/16-18 X 3/4 IN HEX HEAD MACHINE BOLT, GRADE A, GALVANIZED, COARSE |
| 7 | ||
| LW7F-3C75G | IDEC Corporation | 25MM SELECTOR SWITCH LIGHTED |
| 6 | ||
| 2452793 (25530323) (FWI5075G-050RS) | RS Pro | 3/4" F436 STRUCTURAL WASHER HOT DIP GALVANIZED |
| 5 | ||
| 2456415 (25530689) (CAI20250075G-100RS) | RS Pro | 1/4-20 X 3/4 IN CARRIAGE BOLT, GRADE A, GALVANIZED, COARSE |
| 5 | ||
| 2452897 (25530344) (FWUIS075G-050RS) | RS Pro | 3/4" FLAT WASHER GALVANIZED |
| 4 | ||
| 225L075G | B&B Electronics Manufacturing Company | TIMING BELT, SINGLE SIDED, 0.750'' BW, 60 TEETH, 571.5MM PITCH LENGTH |
| 3 | ||
| MT0075G | Siemens | CONTROL TRANSFORMER, 75VA, 208/230/460-115 |
| 2 | ||
| E14B75GM | ENM Company | PANEL METER, COUNTER, ELEC, DIGITAL,7 DIG, WIRE LEADS, DIM 1.593"WX0.98"HX1.639"D |
| 2 | ||
| RGC2P60CM75GEN | Carlo Gavazzi Holding AG | SOLID STATE RELLAY, 3-PHASE, DIN-RAIL, 2-POLE, 73-660VAC, 75A, BOX CLAMP CONNEC |
| 2 | ||
| G9SA-EX031-T075 (G9SAEX031T075) | OMRON Industrial Automation | SAFETY RELAY, EXPANSION MODULE, 3NO+1NC, 45MM, 7.5 SEC, G9SA SERIES |
| 2 | ||
| BES010F (BES 516-375-G-E4-C-PU-05) | Balluff Inc | PROXIMITY SENSOR BES 516-375-G-E4-C-PU-05, BES SERIES |
| 1 | ||
 STMicroelectronics | SCT011HU75G3AG | STMicroelectronics | Automotive-grade silicon carbide Power MOSFET 750 V, 11.4 mOhm typ., 110 A in an HU3PAK package RoHS : Compliant |
| 0 | |
| SCT060HU75G3AG | STMicroelectronics | Automotive-grade silicon carbide Power MOSFET 750 V, 58 mOhm typ., 30 A in an HU3PAK package RoHS : Compliant |
| 0 | ||
| SCT011H75G3AG | STMicroelectronics | Automotive-grade silicon carbide Power MOSFET 750 V, 11.4 mOhm typ., 110 A in an H2PAK-7 package RoHS : Compliant |
| 0 | ||
 Microchip Technology Inc | MCP120-475GI/TO | Microchip Technology Inc | Supervisor Open Drain Active Low, TO-92, Projected EOL: 2036-01-01 RoHS : Compliant |
| 27,000 | |
| TFS1575G | Microchip Technology Inc | TFS1575G, Projected EOL: 2050-07-31 - Contact for Pricing RoHS : Compliant | 0 | |||
| APT75GH120J | Microchip Technology Inc | IGBT FAST Fieldstop Low Frequency Single 1200 V 75 A SOT-227, SOT-227, Projected EOL: 2051-09-30 RoHS : Compliant |
| 0 | ||
| APT75GH120B | Microchip Technology Inc | IGBT FAST Fieldstop Low Frequency Single 1200 V 75 A TO-247, TO-247, Projected EOL: 2051-09-30 RoHS : Compliant |
| 0 | ||
| ZL50075GAG2 | Microchip Technology Inc | Pb Free 32K DX+Rate Conversion & 64 I/O, BGA, Projected EOL: 2027-12-16 - Contact for Pricing RoHS : Compliant | 0 | |||
| APT75GN60BG | Microchip Technology Inc | IGBT Fieldstop Low Frequency Single 600 V 75 A TO-247, TO-247, Projected EOL: 2046-04-30 RoHS : Compliant |
| 0 | ||
| APT75GN120LG | Microchip Technology Inc | IGBT Fieldstop Low Frequency Single 1200 V 75 A TO-264, TO-264, Projected EOL: 2046-04-30 RoHS : Compliant |
| 0 | ||
| APT75GN120B2G | Microchip Technology Inc | IGBT Fieldstop Low Frequency Single 1200 V 75 A TO-247 MAX, T-MAX, Projected EOL: 2046-04-30 RoHS : Compliant |
| 0 | ||
| APT75GH120BD40 | Microchip Technology Inc | IGBT FAST Fieldstop Low Frequency Combi 1200 V 75 A TO-247, TO-247, Projected EOL: 2050-12-18 RoHS : Compliant |
| 0 | ||
| APT75GH120JD30 | Microchip Technology Inc | IGBT FAST Fieldstop Low Frequency Combi 1200 V 75 A SOT-227, SOT-227, Projected EOL: 2050-12-18 RoHS : Compliant |
| 0 | ||
| APT75GN120JDQ3 | Microchip Technology Inc | IGBT Fieldstop Low Frequency Combi 1200 V 75 A SOT-227, SOT-227, Projected EOL: 2046-04-30 RoHS : Compliant |
| 0 | ||
| APT75GN60BDQ2G | Microchip Technology Inc | IGBT Fieldstop Low Frequency Combi 600 V 75 A TO-247, TO-247, Projected EOL: 2046-04-30 RoHS : Compliant |
| 0 | ||
| APT75GH120BSC30 | Microchip Technology Inc | IGBT FAST Fieldstop SiC Combi 1200 V 75 A TO-247, TO-247, Projected EOL: 2051-09-30 RoHS : Compliant |
| 0 | ||
| APT75GH120JSC30 | Microchip Technology Inc | IGBT FAST Fieldstop SiC Combi 1200 V 75 A SOT-227, SOT-227, Projected EOL: 2050-12-18 RoHS : Compliant |
| 0 | ||
| APT75GP120JSC30 | Microchip Technology Inc | IGBT PT MOS 7 SiC Combi 1200 V 75 A SOT-227, SOT-227, Projected EOL: 2051-03-27 RoHS : Compliant |
| 0 | ||
 Bisco Industries | PSPT-187-175-GR | Brady Worldwide Inc | 9,900 | |||
| 2527-5GH | Advanced Interconnect | 575 | ||||
| J2655FBR0375G1Z | Superior Washer & Gasket Company | 50 | ||||
| J2655FAW0375G1ZC | Superior Washer & Gasket Company | 50 | ||||
| OF75GJE | ACTIVE COMPNTS/DIODES | 10 | ||||
 Rochester Electronics | 74LVC1G175GF/S505,125 | NXP Semiconductors | Flip Flop Positive Edge 1 Element 1.8V, 2.5V, 3.3V, 5V 6-SON Tube RoHS : Compliant |
| 6,930 | |
NXP3875GR | NXP Semiconductors | Trans BJTs Single 50V 150mA SOT-23-3 T/R RoHS : Compliant |
| 1,853,460 | ||
74LVC1G175GM,132 | NXP Semiconductors | Flip Flop Positive Edge 1 Element 1.8V, 2.5V, 3.3V, 5V 6-SON T/R RoHS : Not Compliant |
| 51,010 | ||
74AUP1G175GF,132 | NXP Semiconductors | Flip Flop Positive Edge 1 Element 1.2V, 1.5V, 1.8V, 2.5V, 3.3V 6-SON T/R RoHS : Compliant |
| 72,263 | ||
NXP3875GR | Nexperia | Trans BJTs Single 50V 150mA SOT-23-3 T/R RoHS : Compliant |
| 56,285 | ||
| 74AUP1G175GM/S500X | Nexperia | Low-power D-type flip-flop with reset; positive-edge trigger RoHS : Compliant |
| 160,000 | ||
74AUP1G175GF,132 | Nexperia | Flip Flop Positive Edge 1 Element 1.2V, 1.5V, 1.8V, 2.5V, 3.3V 6-SON T/R RoHS : Compliant |
| 159,000 | ||
BSM75GB60DLCHOSA1 | Infineon Technologies AG | Insulated Gate Bipolar Transistor, 100A I(C), 600V V(BR)CES, N-Channel RoHS : Compliant |
| 10 | ||
| BSM75GAR120DN2HOSA1 | Infineon Technologies AG | IGBT MOD 1.2kV 105A 625W Tray RoHS : Compliant | 530 | |||
| BSM75GB170DN2HOSA1 | Infineon Technologies AG | IGBT MOD 1.7kV 110A 625W Tray RoHS : Compliant |
| 632 | ||
TLE4275GV33ATMA1 | Infineon Technologies AG | IC VOLT REG Fixed 1 REG 3.3V 400mA TO-263-6 T/R RoHS : Compliant |
| 7,678 | ||
| BSM75GB120DLCHOSA1 | Infineon Technologies AG | IGBT MOD 1.2kV 170A 690W Module Tray RoHS : Compliant |
| 4,599 | ||
| TLE4275G | Infineon Technologies AG | IC VOLT REG Fixed 1 REG 5V 450mA TO-263-6 T/R RoHS : Compliant |
| 170 | ||
| NNCD7.5G-T1-A | Renesas Electronics Corporation | TVS Diode Zener Uni-Directional 4V (Max) SOT-23-5 T/R RoHS : Compliant |
| 15,000 | ||
| SI8275GBD-IS1 | Skyworks Solutions Inc | SI8275GBD - Automotive high CMTI 2.5 kV 3 V UVLO Dual isolated driver with deglitch RoHS : Compliant |
| 16 | ||
 Sager | IDSD-07-D-15.75-G | Samtec Inc | Ribbon Cables / IDC Cables Slim Body Double-Row IDC Socket Assemblies, 0.100 Pitch RoHS : Compliant |
| 0 | |
| IDSS-12-D-04.75-G-R | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| IDMD-10-T-06.75-G-RW | Samtec Inc | Ribbon Cables / IDC Cables Slim Body Double-Row IDC Male Assemblies, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| GRFT75-G | ABB Group | OC GRFT75G OUTLET BOX FORM T 3/4IN |
| 0 | ||
| M3786/4-0875GL | Grayhill Inc | Rotary Switches Rotary Switch, Military, 44MBG45-02-1-05N | 0 | |||
| ZSTMM-120-75-G-D-250 | Samtec Inc | Headers & Wire Housings 2.00 mm Shrouded Variable Stack Height Terminal Strip, Cable Mate RoHS : Compliant |
| 0 | ||
| IDMS-05-S-02.75-G-ST8 | Samtec Inc | Ribbon Cables / IDC Cables Slim Body Single-Row IDC Male Assemblies, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| IDSD-20-D-05.75-G | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| LH75G | ABB Group | Thomas & Betts |
| 0 | ||
| IDSD-04-D-15.75-G | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| IDSD-11-D-15.75-G | Samtec Inc | SLIM BODY DOUBLE-ROW IDC SOCKET ASSEMBLIES, 0.100 PITCH RoHS : Compliant |
| 0 | ||
| IDSD-13-D-08.75-G | Samtec Inc | Ribbon Cables / IDC Cables Slim Body Double-Row IDC Socket Assemblies, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| RE75-G | ABB Group | OC RE75G URTH CTD RDC BSHG 2-1/2 - |
| 0 | ||
| IDSD-08-S-02.75-G-ST3 | Samtec Inc | Ribbon Cables / IDC Cables Slim Body Double-Row IDC Socket Assemblies, 0.100 Pitch RoHS : Compliant |
| 0 | ||
| CH75-G | ABB Group | OC CH75G PVC CTD CONN HUB, SIZE 3/4 |
| 0 | ||
 TME | FLRY-B0.75-GY/RD | BQ Cable | Wire; FLRY-B; 1x0.75mm2; stranded; Cu; PVC; grey-red; 60V; 100m |
| 700 | |
| FLRY-A0.75-GR/1 | BQ Cable | Wire; FLRY-A; 1x0.75mm2; stranded; Cu; PVC; green; 60V; Class: 5 |
| 320 | ||
| R75GN415050H0J | KEMET Corporation | Capacitor: polypropylene; R75; 1.5uF; 160VDC; 90VAC; THT; ±5% RoHS : Compliant |
| 203 | ||
| 3DP-PLA1.75GE-01-BK | Gembird Electronics Ltd | Filament: PLA; 1.75mm; black; 190÷220°C; 200g |
| 42 | ||
| PLA-1.75-GRAY | Devil Design | Filament: PLA; Ø: 1.75mm; grey; 200÷235°C; 1kg |
| 34 | ||
| PLA 1,75 GLOW IN THE DARK BLUE | Devil Design | Filament: PLA; Ø: 1.75mm; dark blue; 200÷235°C; 1kg |
| 6 | ||
| 3075 GR005 | Alpha Wire | Wire; HookUp Wire; stranded; Cu; 18AWG; PVC; green; 600V; 30.5m |
| 2 | ||
| NBNB75GLP9 | Neutrik USA Inc | Connector: BNC; coaxial; straight; 75Ω; crimped; gold-plated |
| 0 | ||
| NS39-075GN025 | Cheval Electronic Enclosure Co Ltd | Cable with crimped terminals; H05V-K; 0.75mm2; green; NS39-T |
| 0 | ||
| NSYPLM75G | Schneider Electric | Enclosure: wall mounting; X: 536mm; Y: 747mm; Z: 300mm; Thalassa PLM RoHS : Compliant |
| 0 | ||
| BSP75GQTA | Diodes Incorporated | IC: power switch; low-side; 1.4A; Ch: 1; N-Channel; SMD; SOT223 RoHS : Compliant |
| 0 | ||
| CSTCR6M75G53-R0 | Murata Manufacturing Co Ltd | Resonator; 15pF; SMD; ESR: 50Ω; CSTCR_G; Tol: ±0.5%; 4.5x2x1.2mm RoHS : Compliant |
| 0 | ||
| FLY0.75-GR | BQ Cable | Wire; FLY; 1x0.75mm2; stranded; Cu; PVC; green; 60V; 100m |
| 0 | ||
| GQM1875G2E200FB12D | Murata Manufacturing Co Ltd | Capacitor: ceramic; MLCC; 20pF; 250V; X8G; ±1%; SMD; 0603; 180mm RoHS : Compliant |
| 0 | ||
| GQM1875G2E2R2BB12D | Murata Manufacturing Co Ltd | Capacitor: ceramic; MLCC; 2.2pF; 250V; X8G; ±0.1pF; SMD; 0603; 180mm RoHS : Compliant |
| 0 | ||
 Ameya Holding Limited | BU52075GWZ-E2 | ROHM Semiconductor | 两极检测（极性判别输出）霍尔IC RoHS : Compliant |
| 6,000 | |
| MAX9275GTN/V+ | Analog Devices Inc | RoHS : Compliant | 3,697 | |||
74LVC1G175GV,125 | Nexperia | IC D-TYPE POS TRG SNGL 6TSOP RoHS : Compliant | 2,066 | |||
| 74LVC1G175GM,115 | Nexperia | 74LVC Series 5.5 V SMT Single D-Type Flip-Flop with Reset - XSON-6 RoHS : Compliant | 1,949 | |||
74LVC1G175GS,132 | Nexperia | IC D-TYPE POS TRG SNGL 6XSON RoHS : Compliant | 1,734 | |||
| DS2775G+ | Analog Devices Inc | DS2775 Series 2-Cell Stand-Alone Li+ Fuel-Gauge IC - TDFN-14 RoHS : Compliant | 1,728 | |||
| MAX9275GTN+ | Analog Devices Inc | RoHS : Compliant | 857 | |||
| BD45E275G-MTR | ROHM Semiconductor | 延迟时间固定型 电压检测器 RoHS : Compliant |
| 300 | ||
| BD45E475G-MTR | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
BD45275G-TR | ROHM Semiconductor | RoHS : Compliant |
| 50 | ||
| BD46275G-TR | ROHM Semiconductor | RoHS : Compliant |
| 50 | ||
 ComSIT USA | ZMY75GS18 | Vishay Semiconductors | ZENER DIODE Zener Diode, 75V V(Z), 6.04%, 1W, Silicon, Unidirectional, DO-213AB RoHS : Compliant | 155,000 | ||
| TZMC75GS18 | Vishay Intertechnologies | SMALL SIGNAL ZENER DIODE Zener Diode, 75V V(Z), 5%, 0.5W, Silicon, Unidirectional, DO-213AA RoHS : Compliant | 75,025 | |||
74LVC1G175GV | NXP Semiconductors | SINGLE D-TYPE FLIP-FLOP WITH RESET; POSITIVE-EDGE TRIGGER D Flip-Flop, LVC/LCX/Z Series, 1-Func, Positive Edge Triggered, 1-Bit, True Output, CMOS, PDSO6 RoHS : Compliant | 9,000 | |||
| MT48LC4M16A2TG75G | Micron Technology Inc | 64 MBIT: 1 MEG X 16 X 4 BANKS SDRAM Synchronous DRAM, 4MX16, 5.4ns, CMOS, PDSO54 RoHS : Not Compliant | 3,188 | |||
| 74AUP1G175GN132 | NXP Semiconductors | IC FF D-TYPE SNGL 1BIT 6XSON RoHS : Compliant | 2,675 | |||
| TLE4275G | Infineon Technologies AG | 5-VOLT LOW DROP FIXED VOLTAGE REGULATOR Fixed Positive LDO Regulator, 5V, 0.5V Dropout, BIPolar, PSSO5 RoHS : Compliant | 2,660 | |||
| CNY75GA | Vishay Intertechnologies | PHOTOTRANSISTOR OUTPUT, WITH BASE CONNECTION, OPTOCOUPLER Transistor Output Optocoupler, 1-Element, 5000V Isolation RoHS : Not Compliant | 2,580 | |||
BTS775G | Infineon Technologies AG | TRILITHIC Brush DC Motor Controller, PDSO28 RoHS : Not Compliant | 935 | |||
| MT48LC32M4A2P75G | Micron Technology Inc | 128 MEGABIT: 8 MEG X 4 X 4 BANKS SDRAM Synchronous DRAM, 32MX4, 5.4ns, CMOS, PDSO54 RoHS : Compliant | 784 | |||
| 74AUP1G175GM115 | NXP Semiconductors | Flip Flop D-Type Pos-Edge 1-Element 6-Pin RoHS : Compliant | 605 | |||
| MT48LC4M16A2P75G | Micron Technology Inc | 64 MBIT: 1 MEG X 16 X 4 BANKS SDRAM Synchronous DRAM, 4MX16, 5.4ns, CMOS, PDSO54 RoHS : Compliant | 280 | |||
| TLE4675GATMA1 | Infineon Technologies AG | Fixed Positive LDO Regulator, 5V, 0.5V Dropout, BIPolar, PSSO5 RoHS : Compliant | 100 | |||
| RDP275G | unknown | Electronic Component RoHS : Not Compliant | 30 | |||
| BSM75GAL120DN2 | Eupec Gmbh & Co Kg | IGBT POWER MODULE Insulated Gate Bipolar Transistor, 105A I(C), 1200V V(BR)CES, N-Channel RoHS : Not Compliant | 12 | |||
| UPD75G16HE | NEC Electronics Group | Electronic Component RoHS : Not Compliant | 2 | |||
 Interstate Connecting Components | M83723/75G802N L/C | Conesys | STD PLUG, SOCKET, 83723 SIII BAYONET | 0 | ||
| M83723/75G8026 | Conesys | STD PLUG, SOCKET, 83723 SIII BAYONET | 0 | |||
| M83723/75G8029 | Conesys | STD PLUG, SOCKET, 83723 SIII BAYONET | 0 | |||
| 10-646727-75GW | Amphenol Aerospace | SA-AAO | 0 | |||
| MWDM2L-75GP-4K1-18B | Glenair Inc | SHIELDED MICRO-D TWISTED WIRE RoHS : Compliant |
| 0 | ||
| HM2P07PKP275GFL1LF | Amphenol FCi | HM2P07PKP275GFL1LF-MPAC5RSTPFH | 0 | |||
| 177-740-2-75GP4K1-7MTG | Glenair Inc | SHIELDED MICRO-D TWISTED WIRE | 0 | |||
| 89075GULPT | Amphenol Positronic | 0 | ||||
| HM2P07PKP275GFLF | Amphenol FCi | HM2P07PKP275GFLF-MPAC5RSTPFHDR RoHS : Compliant | 0 | |||
| MWDM2L-75GS-4K7-18M1 | Glenair Inc | RoHS : Compliant | 0 | |||
| 3003W3PXX75G40X | Conec Corporation | D-SUB COMBI STIFTLEISTE 3W3 | 0 | |||
| 3007W2SAU75G40X | Conec Corporation | D-SUB COMBI BUCHSENLEISTE 7W2 | 0 | |||
| MWDM2L-75GP-6K7-315L | Glenair Inc | 0 | ||||
| M83723/75G8028 L/C | Conesys | STD PLUG, SOCKET, 83723 SIII BAYONET | 0 | |||
| 89075GULSR | Amphenol Positronic | CBM SERIES D-SUB 3 POS SOCKET LESS CONTACTS |
| 0 | ||
 PEI Genesis | AE83375G14159 | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | |
| AE83375G2025Y | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| AE83375G20396 | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| AE83375G2232Y | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| AE83375G24617 | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| AE83375G8039 | Aero-Electric Connector Inc |
| 0 | |||
| AE83375G10068 | Aero-Electric Connector Inc |
| 0 | |||
| AE83375G14127 | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| M83723/75G24578 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| M83723/75G10067 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| M83723/75G14126 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| M83723/75G2255N | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| M83723/75G8026 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| AE83375G2461Y | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| 88-559467-75G | Amphenol Corporation |
| 0 | |||
 Powell Electronics | RF3-03-T-03-75-G | Adam Technologies Inc | RF SMB CONNECTOR RoHS : Compliant |
| 1,122 | |
| SBS75GWHT-BK | Anderson Power Products | SBS75G HSG/SP WHT |
| 330 | ||
| MMI-BR2-75-G-S | Adam Technologies Inc | MINI FAKRA RIGHT ANGLE PLUG, 4P UP SILVE RoHS : Compliant |
| 297 | ||
| SBS75GBLK-BK | Anderson Power Products | SBS75G HSG/SP BLK |
| 165 | ||
| 175G-NA | Hammond Manufacturing | 1.5KVA AUTO STEPDOWN N.AMER. RoHS : Compliant |
| 15 | ||
| M83723/75G20416 | Amphenol Corporation | CONNECTOR RoHS : Not Compliant |
| 7 | ||
| M83723/75G1831N | Amphenol Corporation | CONNECTOR RoHS : Not Compliant |
| 4 | ||
| RP17175G2 | CII Guardian | MIL/AERO RELAY RP17175G2 |
| 3 | ||
| MWDM2L-75GP-4K1-18B | Glenair Inc | MICRO D CONNECTOR RoHS : Compliant |
| 2 | ||
| M83723/75G20417 | Amphenol Corporation | CONNECTOR RoHS : Not Compliant |
| 1 | ||
| M83723/75G20286 | Amphenol Corporation | CONNECTOR RoHS : Not Compliant |
| 1 | ||
| M83723/75G20287 | Amphenol Corporation | CONNECTOR RoHS : Not Compliant |
| 1 | ||
| M83723/75G0803N | Amphenol Corporation | CONNECTOR RoHS : Not Compliant |
| 1 | ||
| M83723/75G20256 | Amphenol Corporation | CONNECTOR RoHS : Not Compliant |
| 1 | ||
 PUI | 8933-G150275GAACA04B | 1,050 | ||||
 Richardson RFPD | SI5332DD15075-GM1 | Skyworks Solutions Inc | Frequency Synthesis Clock Generator RoHS : Compliant | 0 | ||
| SI5332FD09575-GM1 | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 200MHz-OUT 32-P RoHS : Compliant | 0 | |||
| SI5332HD14475-GM2 | Skyworks Solutions Inc | SI5332HD14475-GM2 RoHS : Compliant | 0 | |||
| SI5334B-B01375-GM | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 350MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| MRF175GU | MACOM | Trans RF MOSFET N-CH 65V 26A 5-Pin Case 375-04 RoHS : Compliant |
| 0 | ||
| OL75G5E-R52 | Ohmite Mfg Co | Res Carbon Film 7.5 Ohm 5% 0.5W(1/2W) ±350ppm/C Ce RoHS : Compliant |
| 0 | ||
| SI5332BD08975-GM2 | Skyworks Solutions Inc | Clock Generator 10MHz to 250MHz-IN 200MHz-OUT Auto RoHS : Compliant | 0 | |||
| SI5335A-B09175-GM | Skyworks Solutions Inc | Clock Generator 25MHz/27MHz-IN 350MHz-OUT 24-Pin Q RoHS : Compliant | 0 | |||
| SI5338A-B07875-GM | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 710MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| SI5338A-B07875-GMR | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 710MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| SI5338G-B02775-GMR | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 710MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| SI5341A-D11775-GMR | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 1028MHz-OUT 64- RoHS : Compliant | 0 | |||
| SI8275GB-AS1 | Skyworks Solutions Inc | Optocoupler Drive Pull-Up/Down 2-CH 5.5V 1500V Aut RoHS : Compliant |
| 0 | ||
| SI8275GBD-IS1 | Skyworks Solutions Inc | Optocoupler Drive Pull-Up/Down 2-CH 5.5V 1500V 16- RoHS : Compliant |
| 0 | ||
| PMCT50-75G50R0G | Spectrum Control | RF RESISTOR RoHS : Compliant | 0 | |||
 Rutronik | TZMC75-GS08 | Vishay Intertechnologies | Z-DIODE 0,5W 75V 5% MINIMELF RoHS : Compliant |
| 67,500 | |
| TZMC75-GS18 | Vishay Intertechnologies | Z-DIODE 0,5W 75V 5% MINIMELF RoHS : Compliant |
| 20,000 | ||
| LTPL-G35UVC275GZ | Lite-On Semiconductor Corporation | UVC LED 275NM 47mW 350mA 120° RoHS : Compliant |
| 401 | ||
| LTPL-G35UV275GR-E | Lite-On Semiconductor Corporation | UVC LED 275NM 21mW 150mA 120° RoHS : Compliant |
| 228 | ||
| CNY75GB | Vishay Intertechnologies | OPTOCOUPLER 100-200% WIDEBODY RoHS : Compliant |
| 100 | ||
| LTPL-G35UVC275GH | Lite-On Semiconductor Corporation | UVC LED 275NM 80mW 350mA 120° RoHS : Compliant |
| 72 | ||
 Chip 1 Exchange | 3FL75G | Rubycon Corporation | INSTOCK | 21,000 | ||
| BZX384-C75-GS08 | INSTOCK | 5,848 | ||||
| TNY275G | POWER | INSTOCK | 2,780 | |||
| CNY75GA | INSTOCK | 2,700 | ||||
| TLE4275G | INSTOCK | 1,673 | ||||
| ZMY75-GS## | Vishay Intertechnologies | INSTOCK | 1,236 | |||
| S07K275GS3 | INSTOCK | 986 | ||||
| TLE4275G | Infineon Technologies AG | INSTOCK RoHS : Compliant | 896 | |||
| 74LVC1G175GW-Q100H | Nexperia | INSTOCK RoHS : Compliant | 693 | |||
| RT7275GQW | Richco | INSTOCK | 500 | |||
| CNY75GA0883 | INSTOCK | 90 | ||||
| PMI0P275GP | INSTOCK | 60 | ||||
| 74AUP1G175GW;125 | NXP Semiconductors | INSTOCK | 8 | |||
| MT48H8M32LFB5-75:G | MEI | INSTOCK | 5 | |||
| MT46V32M8TG-75G | Micron Technology Inc | INSTOCK | 4 | |||
 Avnet Abacus | LQW2UASR75G00L | Murata Manufacturing Co Ltd | (Alt: LQW2UASR75G00L) RoHS : Compliant | 2,000 | ||
| 75GF31004030J | KEMET Corporation | (Alt: R75GF31004030J) RoHS : Compliant | 1,800 | |||
| R75GI410050H0J | KEMET Corporation | Power Film Capacitor Metallized PP Radial Box 2 Pin 1 uF 5 Through Hole 90 V 160 V (Alt: R75GI410050H0J) RoHS : Compliant | 500 | |||
| 75GR51004000J | KEMET Corporation | (Alt: R75GR51004000J) RoHS : Compliant | 112 | |||
| 564R75GAD10 | Vishay Intertechnologies | Ceramic Disc Capacitor 1000 pF 75 kV 20 80 Y5U 127 mm Radial Leaded 564R Series (Alt: 564R75GAD10) RoHS : Compliant | 0 | |||
| RE75G24R0C02 | Vishay Intertechnologies | (Alt: RE75G24R0C02) RoHS : Compliant | 0 | |||
| 75GI41004000J | KEMET Corporation | (Alt: R75GI41004000J) RoHS : Compliant | 0 | |||
| R75GF3100AA30J | KEMET Corporation | Power Film Capacitor Metallized PP Radial Box 2 Pin 01 uF 5 Through Hole 90 V 160 V (Alt: R75GF3100AA30J) RoHS : Compliant | 0 | |||
| R75GF2680AA00J | KEMET Corporation | Power Film Capacitor Metallized PP Radial Box 2 Pin 0068 uF 5 Through Hole 90 V 160 V (Alt: R75GF2680AA00J) RoHS : Compliant | 0 | |||
| GQM1875G2E220GB12D | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor 22 pF 250 V 0603 1608 Metric 2 X8G GQM Series 16 mm (Alt: GQM1875G2E220GB12D) RoHS : Compliant | 0 | |||
| GQM1875G2E100GB12D | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor 10 pF 250 V 0603 1608 Metric 2 X8G GQM Series 16 mm (Alt: GQM1875G2E100GB12D) RoHS : Compliant | 0 | |||
| GQM1875G2E8R0BB12D | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor 8 pF 250 V 0603 1608 Metric 01pF X8G GQM Series 16 mm (Alt: GQM1875G2E8R0BB12D) RoHS : Compliant | 0 | |||
| GQM1875G2E4R7WB12D | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor 47 pF 250 V 0603 1608 Metric 005pF X8G GQM Series (Alt: GQM1875G2E4R7WB12D) RoHS : Not Compliant | 0 | |||
| GQM1875G2E130FB12D | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor 13 pF 250 V 0603 1608 Metric 1 X8G GQM Series 16 mm (Alt: GQM1875G2E130FB12D) RoHS : Compliant | 0 | |||
| GQM1875G2E1R6WB12D | Murata Manufacturing Co Ltd | SMD Multilayer Ceramic Capacitor 16 pF 250 V 0603 1608 Metric 005pF X8G GQM Series (Alt: GQM1875G2E1R6WB12D) RoHS : Not Compliant | 0 | |||
Avnet Asia | 74AUP1G175GS,132 | Nexperia | Flip Flop, 74AUP1G175, D, 5.7 ns, 615 MHz, 4 mA, 6 Pins, XSON (Alt: 74AUP1G175GS,132) RoHS : Compliant | 10,000 | ||
| 74LVC1G175GW,125 | Nexperia | Flip-Flop, Non Inverted, Positive Edge, 74LVC1G175, D, 300 MHz, 50 mA, SC-88 (Alt: 74LVC1G175GW,125) RoHS : Compliant | 0 | |||
| UMPS-02-07.5-G-V-S-W-TR | Samtec Inc | (Alt: UMPS-02-07.5-G-V-S-W-TR) RoHS : Compliant | 0 | |||
| LSRNJ12575GL220MMY | TAIYO YUDEN | Inductor Power Shielded Wirewound 22uH 20% 100kHz Ferrite 4.05A SMD Emboss T/R (Alt: LSRNJ12575GL220MMY) RoHS : Compliant | 0 | |||
| UMPT-02-07.5-G-V-S-W-TR | Samtec Inc | (Alt: UMPT-02-07.5-G-V-S-W-TR) RoHS : Compliant | 0 | |||
| UMPT-02-07.5-G-V-S-TR | Samtec Inc | (Alt: UMPT-02-07.5-G-V-S-TR) RoHS : Compliant | 0 | |||
| GQM1875G2E200GB12D | Murata Manufacturing Co Ltd | (Alt: GQM1875G2E200GB12D) RoHS : Compliant | 0 | |||
| 74AUP1G175GS/S12XL | Nexperia | (Alt: 74AUP1G175GS/S12XL) RoHS : Compliant | 0 | |||
| 74LVC1G175GM,115 | Nexperia | Flip Flop, 74LVC1G175, D, 5.5 ns, 300 MHz, 32 mA, 6 Pins, XSON (Alt: 74LVC1G175GM,115) RoHS : Compliant | 0 | |||
| 74LVC1G175GW-Q100H | Nexperia | (Alt: 74LVC1G175GW-Q100H) RoHS : Compliant | 0 | |||
| 74LVC1G175GV-Q100H | Nexperia | (Alt: 74LVC1G175GV-Q100H) RoHS : Compliant | 0 | |||
| KFGZ03-18-A75G50A | Amphenol Corporation | AHLKFGZ03-18-A75G50A OSFP224 OVERPASS 1X (Alt: KFGZ03-18-A75G50A) RoHS : Compliant | 0 | |||
| NGCL1206UV1R575G3TRF | NIC Components Corp | (Alt: NGCL1206UV1R575G3TRF) RoHS : Compliant | 0 | |||
| GQM1875G2E6R2BB12D | Murata Manufacturing Co Ltd | (Alt: GQM1875G2E6R2BB12D) RoHS : Compliant | 0 | |||
| UMPS-06-07.5-G-V-S-W-TR | Samtec Inc | 2.00 mm mPOWER Ultra Micro Power Socket (Alt: UMPS-06-07.5-G-V-S-W-TR) RoHS : Compliant | 0 | |||
 Avnet Silica | 74LVC1G175GW-Q100H | Nexperia | Flip Flop 74LVC1G175 D 55 ns 300 MHz 32 mA 6 Pins TSSOP (Alt: 74LVC1G175GW-Q100H) RoHS : Compliant | 423,000 | ||
| 74LVC1G175GW,125 | Nexperia | FlipFlop Non Inverted Positive Edge 74LVC1G175 D 300 MHz 50 mA SC88 (Alt: 74LVC1G175GW,125) RoHS : Compliant | 198,000 | |||
| 74LVC1G175GM,132 | Nexperia | Flip Flop 74LVC1G175 D 55 ns 300 MHz 32 mA 6 Pins XSON (Alt: 74LVC1G175GM,132) RoHS : Compliant | 20,000 | |||
| 74LVC1G175GV,125 | Nexperia | FlipFlop Non Inverted Positive Edge 74LVC1G175 D 300 MHz 50 mA SC74 (Alt: 74LVC1G175GV,125) RoHS : Compliant | 15,000 | |||
74AUP1G175GN,132 | Nexperia | Flip Flop 74AUP1G175 D 57 ns 615 MHz 4 mA 6 Pins XSON (Alt: 74AUP1G175GN,132) RoHS : Compliant | 5,000 | |||
| 74AUP1G175GW-Q100H | Nexperia | Flip Flop 74AUP1G175 D 57 ns 615 MHz 4 mA 6 Pins TSSOP (Alt: 74AUP1G175GW-Q100H) RoHS : Compliant | 3,000 | |||
| SCT011H75G3AG | STMicroelectronics | Silicon Carbide MOSFET Single N Channel 110 A 750 V 0015 ohm H2PAK (Alt: SCT011H75G3AG) RoHS : Compliant | 1,000 | |||
| SCT060HU75G3AG | STMicroelectronics | Automotivegrade silicon carbide Power MOSFET 750V 30A (Alt: SCT060HU75G3AG) RoHS : Compliant | 600 | |||
| NB675GL-Z | Monolithic Power Systems | Conv DCDC Single Step Down 5V 22V 21Pin QFN EP TR (Alt: NB675GL-Z) RoHS : Compliant | 0 | |||
| NXP3875GR | Nexperia | Trans GP BJT NPN 50V 015A 3Pin TO236AB TR (Alt: NXP3875GR) RoHS : Compliant | 0 | |||
| BSP75GQ-13 | Diodes Incorporated | (Alt: BSP75GQ-13) RoHS : Compliant | 0 | |||
| 2J0202-C75G | 2J USA | 2J0202 Black Connector Mount 2450 SMAMaleRPGold (Alt: 2J0202-C75G) RoHS : Compliant | 0 | |||
| APT75GP120J | Microchip Technology Inc | (Alt: APT75GP120J) RoHS : Compliant | 0 | |||
| AFT05MP075GNR1 | NXP Semiconductors | Transistor RF FET NCH 40V 136MHz to 520MHz 4Pin TO270WBG TR (Alt: AFT05MP075GNR1) RoHS : Compliant | 0 | |||
| HR1275GY-0000-Z | Monolithic Power Systems | CRM DCM PFC AND CURRENT MODE LLC (Alt: HR1275GY-0000-Z) RoHS : Compliant | 0 | |||
 Braemac Americas-Symmetry | AISC-1008-R75G-T | Abracon Corporation | RoHS : Compliant |
| 0 | |
| AISC-Q0805-R75G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-0603-R0075G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
| AISC-Q1008-R75G-T | Abracon Corporation | RoHS : Compliant |
| 0 | ||
 Component Electronics, Inc | LTG-0375G | Lite-On Semiconductor Corporation | IN STOCK SHIP TODAY | 296 | ||
MT48LC8M16A2P-75:G | Micron Technology Inc | IN STOCK SHIP TODAY RoHS : Compliant |
| 125 | ||
| OP275GP | Analog Devices Inc | IN STOCK SHIP TODAY RoHS : Not Compliant |
| 102 | ||
| NBNB75GLP9 | Neutrik USA Inc | IN STOCK SHIP TODAY |
| 81 | ||
| OP275GS | PMI | IN STOCK SHIP TODAY |
| 65 | ||
| 8136-475G23 | IN STOCK SHIP TODAY |
| 52 | |||
| RE75G5R00 | Ohmite Mfg Co | IN STOCK SHIP TODAY |
| 22 | ||
| MT48LC8M8A2P-75-G | Micron Technology Inc | IN STOCK SHIP TODAY | 9 | |||
| CU4032K275G2K1 | TDK Electronics | IN STOCK SHIP TODAY RoHS : Unknown |
| 5 | ||
| MG10-375G4 | IN STOCK SHIP TODAY | 4 | ||||
| 3075-GR005 | Alpha Wire | IN STOCK SHIP TODAY |
| 1 | ||
 DB Roberts | 2775GM | Heyco | DP 1750 BLACK AB94620369 | 0 | ||
 EBV Elektronik | TZMB75-GS08 | Vishay Intertechnologies | (Alt: TZMB75-GS08) RoHS : Compliant | 60,000 | ||
| TNY275GN-TL | Power Integrations | (Alt: TNY275GN-TL) RoHS : Compliant | 58,000 | |||
| TZMC75-GS08 | Vishay Intertechnologies | (Alt: TZMC75-GS08) RoHS : Compliant | 57,500 | |||
| CNY75GA | Vishay Intertechnologies | DIP6 CPL WBASE 400mil 63125 CTR e3 (Alt: CNY75GA) RoHS : Compliant | 0 | |||
| APT75GP120J | Microchip Technology Inc | (Alt: APT75GP120J) RoHS : Compliant | 0 | |||
| TZMC75-GS18 | Vishay Intertechnologies | (Alt: TZMC75-GS18) RoHS : Compliant | 0 | |||
| APT75GN60BG | Microchip Technology Inc | (Alt: APT75GN60BG) RoHS : Compliant | 0 | |||
| TLE4675GATMA1 | Infineon Technologies AG | Fixed LDO Voltage Regulator AECQ100 55 V to 45 V 250 mV Dropout 5 V400 mA out TO2635 (Alt: SP000315009) RoHS : Compliant | 0 | |||
| C10975_GT4-WW | LEDIL | GT4 Lens With Transparent Color (Alt: C10975_GT4-WW) RoHS : Compliant | 0 | |||
| AFT05MP075GNR1 | NXP Semiconductors | Transistor RF FET NCH 40V 136MHz to 520MHz 4Pin TO270WBG TR (Alt: AFT05MP075GNR1) RoHS : Compliant | 0 | |||
| TCK22975G,LF(S | Toshiba America Electronic Components | (Alt: TCK22975G,LF(S) RoHS : Compliant | 0 | |||
| SCTH300N75G3AG | STMicroelectronics | STPAKAutomotivegrade silicon carbide Power MOSFET 750 V 65 m typ 300 A (Alt: SCTH300N75G3AG) RoHS : Compliant | 0 | |||
| APT75GP120JDQ3 | Microchip Technology Inc | (Alt: APT75GP120JDQ3) RoHS : Compliant | 0 | |||
| IDWD75G120C5XKSA1 | Infineon Technologies AG | Silicon Carbide Schottky Diode CoolSiC Series Single 12 kV 75 A 330 nC TO247 (Alt: SP005746634) RoHS : Compliant | 0 | |||
| IS32CS8975-GRLA3-TR | Lumissil Microsystems | MCU with 1KB SRAM and 16Kx16 ECC EFlash (Alt: IS32CS8975-GRLA3-TR) RoHS : Compliant | 0 | |||
 FDH Electronics | GC875GB-1 | TE Connectivity | Wire and Cable | 331 | ||
| 9100375GRY | Easy Braid Co | Wire and Cable | 120 | |||
| M83723/75G1005N-LC | Aero-Electric Connector Inc | Connector 83723 RoHS : Not Compliant |
| 110 | ||
| M83723/75G1005N | Aero-Electric Connector Inc | Circular Conn RoHS : Not Compliant |
| 110 | ||
| M83723/75G1006N | Aero-Electric Connector Inc | Circular Conn RoHS : Not Compliant |
| 110 | ||
| M83723/75G1006N-LC | Aero-Electric Connector Inc | Connector 83723 RoHS : Not Compliant |
| 110 | ||
| M83723/75G1002N | Aero-Electric Connector Inc | Connector 83723 RoHS : Not Compliant |
| 50 | ||
| M83723/75G1002N-LC | Aero-Electric Connector Inc | Connector 83723 |
| 50 | ||
| M83723/75G1020N | Aero-Electric Connector Inc | Connector 83723 RoHS : Not Compliant |
| 33 | ||
| S-13975G | FDH Electronics | Supplies - ESG | 20 | |||
| M83723/75G14156 | Amphenol Aerospace | Connector 83723 | 12 | |||
| M83723/75G14156 L/C | Amphenol Aerospace | Connector 83723 |
| 12 | ||
| RE75G1R00 | TTI, Inc | Other Products | 5 | |||
| NXN1.75GN | Techflex Inc | Cable Protect |
| 2 | ||
| RJFTV75GF459 | Amphenol PCD | Connector |
| 0 | ||
 Maritex | 74AUP1G175GW,125 | Nexperia | Flip Flops; 74AUP1G175GW,125; NEXPERIA; 6; 50 MHz RoHS : Compliant |
| 2,089 | |
| U74LVC1G175G-AG6-R | Unisonic Technologies Co Ltd | Flip Flops; U74LVC1G175G-AG6-R; UTC |
| 1,246 | ||
| OP275GSZ-REEL7 | Analog Devices Inc | Multimedia Amplifiers; OP275GSZ-REEL7; ANALOG DEVICES; 8; 2 RoHS : Compliant |
| 96 | ||
| C10975_GT4-WW | LEDIL | Lens for LED high power; angle: 38 to 59 degrees FWHM; Number of LEDs: 4; Dimensions: round 35mm; Height: 9mm; meterial: PMMA; Fastening: glue; pin |
| 54 | ||
 Neutron USA | N201-075-GY | Tripp Lite | Tripp Lite Cat6 Gigabit Snagless Molded Patch Cable |
| 83 | |
| SFN.M13.GLA.75GZ | LEMO connectors | Circular Push Pull Connectors PLUG (CdN) 13CTS |
| 50 | ||
| ATS-50375G-C1-R0 | Advanced Thermal Solutions Inc | Heat Sinks MAXIGRIP HTSNK 37.5X37.5X12.5 (MM) RoHS : Compliant |
| 50 | ||
| NBNB75GLP9 | Neutrik USA Inc | RF Connectors / Coaxial Connectors CBL JCK BNC REAR TWS GROUNDED |
| 50 | ||
| ATS-52375G-C2-R0 | Advanced Thermal Solutions Inc | Heat Sinks MAXIFLOW HTSNK 37.5X37.5X12.5 (MM) |
| 42 | ||
| RGC2A60D75GGEDFM | Carlo Gavazzi Holding AG | Solid State Relay, 3Ph, Heatsink, 2P-SSC-DC, 600V, 3X75A, 1200VP, RGC2 Series RoHS : Compliant |
| 13 | ||
| F175G3-061-D0540 | NMB Technologies Corporation | DC Motorized Impeller, R175x61mm, 24VDC 3.7A, 476CFM 73dB, 88.8W, Potted, Tach/PWM, 4wire |
| 12 | ||
| LW7F-3C75G | IDEC Corporation | 25mm Selector Switch Lighted |
| 6 | ||
| SMD29175G | Chip Quik Inc | Soldering Flux TACK FLUX NO-CLEAN 75 GRAM JAR |
| 5 | ||
| HD4875G-10 | Crydom Inc | Solid State Relays - Industrial Mount SSR Relay, Panel Mount, IP00, 530VAC/75A, DC In,Instantaneous, LED RoHS : Compliant |
| 4 | ||
| 175G-NA | Hammond Manufacturing | Autotransformers Autotransformer, plug-in, 230VAC, 50/60 Hz to 115VAC, 1500VA, 175 Series RoHS : Compliant |
| 4 | ||
| RGC2P60CM75GEN | Carlo Gavazzi Holding AG | Contactors - Solid State 2P-SSC-PROPORTIONAL CONTROL 600V 75A 1200VP-E-CLP COMM |
| 0 | ||
| B66375G0500X187 | TDK Corporation | Ferrite Cores & Accessories E80/38/20 N87LP 0.50MM |
| 0 | ||
| G16LX-112S7-5G-G/Y-50 | Kycon Inc | Modular Connectors / Ethernet Connectors RA 5G MagJack Recep. Shield w/EMI Finger RoHS : Compliant |
| 0 | ||
| AIMB-275G2-00A2E | Advantech Co Ltd | miniITX LGA1151 DP/HDMI/PCIex16/2GbE/2C |
| 0 | ||
 Pasternack Enterprises US | PE3C8875/GR | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GR coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8875/GR, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8875/GR is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GR coax. | 255 | ||
| PE3C8875/GY | Pasternack Enterprises | Key Specifications, Connector 1 Series: 1.0/2.3, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm 1.0/2.3 Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GY coax, 1.0/2.3 cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom 1.0/2.3 to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with 1.0/2.3 cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI 1.0/2.3 to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This 1.0/2.3 to 1.0/2.3 cable is a male to male coax assembly, PE3C8875/GY, can also be known as a 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. 1.0/2.3 plug to 1.0/2.3 plug cable assembly PE3C8875/GY is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible 1.0/2.3 cable assembly is manufactured with 1.0/2.3 to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency 1.0/2.3 male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI 1.0/2.3 plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality 1.0/2.3 to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of 1.0/2.3 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm 1.0/2.3 male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GY coax. | 255 | |||
| PE3C8875/GR-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/GR-72, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/GR-72 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-GR coax. |
| 51 | ||
| PE3C8875/GR-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/GR-36, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/GR-36 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-GR coax. |
| 51 | ||
| PE3C8875/GY-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-GY coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/GY-12, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/GY-12 is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-GY coax. |
| 51 | ||
| PE3C8875/GY-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-GY coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/GY-120, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/GY-120 is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-GY coax. |
| 51 | ||
| PE3C8875/GY-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-GY coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/GY-36, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/GY-36 is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 36 inch length using 75 Ohm 1855A-GY coax. |
| 51 | ||
| PE3C8875/GY-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-GY coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/GY-300, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/GY-300 is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-GY coax. |
| 51 | ||
| PE3C8875/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/GR-12, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/GR-12 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 12 inch length using 75 Ohm 1855A-GR coax. |
| 51 | ||
| PE3C8875/GR-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/GR-300, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/GR-300 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 300 inch length using 75 Ohm 1855A-GR coax. |
| 51 | ||
| PE3C8875/GY-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-GY coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/GY-72, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/GY-72 is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 72 inch length using 75 Ohm 1855A-GY coax. |
| 51 | ||
| PE3C8875/GR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: BNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm BNC Male to 75 Ohm BNC Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-GR coax, BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom BNC to BNC cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with BNC cable connection on one end and BNC cable connection on the other. Our 6G SDI BNC to BNC cable assemblies have a male gender on end 1 and male on end 2. This BNC to BNC cable is a male to male coax assembly, PE3C8875/GR-120, can also be known as a 6G SDI BNC plug to BNC plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. BNC plug to BNC plug cable assembly PE3C8875/GR-120 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible BNC cable assembly is manufactured with BNC to BNC cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency BNC male to BNC male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. 6G SDI BNC plug to BNC plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality BNC to BNC cable assembly for quick shipment worldwide. Variations of BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm BNC male to 75 Ohm BNC male 6G SDI cable 120 inch length using 75 Ohm 1855A-GR coax. |
| 51 | ||
| PEW75GG01 | Pasternack Enterprises | Key Specifications, Waveguide Size: WR-75, Flange Designation: UG, Material: Conductive Silicone Rubber. WR-75 Waveguide Gasket For UG Square Grooved Flanges, Conductive Silicone Elastomer. This conductive gasket is designed to connect two waveguide flanges using stainless steel screws and washers. The PEW75GG01 gasket is specifically made for WR-75 UG Grooved waveguide flanges. The gasket itself is made of Conductive Silicone Rubber, providing a durable and flexible seal. Pasternack has waveguide gaskets (both conductive and non-conductive), screws and other accessories that you need for your waveguides. Often people can forget to order items like screws or waveguide supports. Pasternack has a full line of waveguide accessories available for same day shipment so that you do not have to wait for weeks to get your system working. |
| 3 | ||
 Venkel Ltd. | MEHF0204-ZC-4R75GT | VENKEL LTD | High Frequency MELF;0204;2/5W;�50PPM;4.75R�2% RoHS : Not Compliant | 0 | ||
| WRFI1008-S-R75GT | VENKEL LTD | Wirewound RF Inductor;1008;750nH;�2% RoHS : Not Compliant | 0 | |||
| MEHF0204-ZK-4R75GT | VENKEL LTD | High Frequency MELF;0204;2/5W;�100PPM;4.75R�2% RoHS : Not Compliant | 0 | |||
| WRFI0805-S-R75GT | VENKEL LTD | Wirewound RF Inductor;0805;750nH;�2% RoHS : Not Compliant | 0 | |||
| MEHF0204-TK-4R75GT | VENKEL LTD | High Frequency MELF;0204;1/4W;�100PPM;4.75R�2% RoHS : Not Compliant | 0 | |||
| MEHF0204-TC-4R75GT | VENKEL LTD | High Frequency MELF;0204;1/4W;�50PPM;4.75R�2% RoHS : Not Compliant | 0 | |||
 Vyrian | BSM75GB170DN2HOSA1 | Infineon Technologies AG | Insulated Gate Bipolar Transistor, 110A I(C), 1700V V(BR)CES, N-Channel RoHS : Compliant | 13,156 | ||
| MAX96775GGE-E1 | Analog Devices (Maxim Integrated) | 11,731 | ||||
| MAX96775GGE-V | Analog Devices (Maxim Integrated) | 9,306 | ||||
| AFT05MP075GNR1 | NXP Semiconductors | RF Power Field-Effect Transistor, 1-Element, N-Channel, Metal-oxide Semiconductor FET RoHS : Compliant | 8,614 | |||
SMJ55166-75GB | Texas Instruments | Video DRAM, 256KX16, 75ns, CMOS, CPGA68 | 8,155 | |||
MT48H16M16LFB5-75:G | Micron Technology Inc | Synchronous DRAM, 16MX16, 6ns, CMOS, PBGA90 RoHS : Compliant | 6,323 | |||
| DS2775G+T&R | Analog Devices Inc | Power Supply Support Circuit, Adjustable, 1 Channel RoHS : Compliant | 6,192 | |||
| MAX17075GTG/V+T | Analog Devices Inc | Dual Switching Controller, Current-mode, 1400kHz Switching Freq-Max, CMOS, PQCC24 RoHS : Compliant | 6,022 | |||
| MT48LC32M4A2TG-75:G | Micron Technology Inc | Synchronous DRAM, 32MX4, 5.4ns, CMOS, PDSO54 RoHS : Not Compliant | 5,853 | |||
| BSM75GB60DLCHOSA1 | Infineon Technologies AG | Insulated Gate Bipolar Transistor, 100A I(C), 600V V(BR)CES, N-Channel RoHS : Compliant | 5,648 | |||
| DS2775G+TR | Analog Devices (Maxim Integrated) | 5,379 | ||||
| BSM75GAR120DN2HOSA1 | Infineon Technologies AG | Insulated Gate Bipolar Transistor, 75A I(C), 1200V V(BR)CES, N-Channel RoHS : Compliant | 5,286 | |||
| MT48H8M32LFB5-75:G | Micron Technology Inc | Synchronous DRAM, 8MX32, 5.4ns, CMOS, PBGA90 RoHS : Compliant | 4,935 | |||
| MT48H8M32LFB5-75-G-TR | Micron Technology Inc | 4,702 | ||||
MT46V64M4P-75:G | Micron Technology Inc | DDR1 DRAM, 64MX4, 0.75ns, CMOS, PDSO66 RoHS : Compliant | 2,391 | |||
 Win Source Electronics | 74LVC1G175GW-Q100H | Nexperia | IC FF D-TYPE SNGL 1BIT 6TSSOP / Flip Flop 1 Element D-Type 1 Bit Positive Edge 6-TSSOP, SC-88, SOT-363 RoHS : Compliant |
| 81,000 | |
| JS28F640J3F75G | Micron Technology Inc | IC FLASH 64MBIT PARALLEL 56TSOP / FLASH - NOR Memory IC 64Mbit Parallel 75 ns 56-TSOP RoHS : Compliant |
| 38,004 | ||
| JS28F128J3F75G | Micron Technology Inc | 128Mb J3 Parallel NOR Flash |
| 31,710 | ||
| OP275GSZ-REEL7 | Analog Devices Inc | IC OPAMP AUDIO 9MHZ 8SOIC RoHS : Compliant |
| 30,000 | ||
| OP275GSZ | Analog Devices Inc | IC OPAMP AUDIO 9MHZ 8SOIC / Audio Amp Speaker Class-AB 8-Pin SOIC N Tube RoHS : Compliant |
| 30,000 | ||
| OP275GSZ-REEL | Analog Devices Inc | IC OPAMP AUDIO 9MHZ 8SOIC RoHS : Compliant |
| 27,920 | ||
| IP175G | IC Plus Corp |
| 25,865 | |||
| 74AUP1G175GW | Nexperia | Low-power D-type flip-flop with reset; positive-edge trigger RoHS : Compliant |
| 24,000 | ||
| TLE4275G | Infineon Technologies AG | FIXED POSITIVE LDO REGULATOR RoHS : Compliant |
| 18,996 | ||
| PCT2075GV | Nexperia | I2C-bus Fm+, 1 degree C accuracy, digital temperature sensor and thermal watchdog |
| 15,563 | ||
| MT48LC8M16A2B4-75:G | Micron Technology Inc | IC SDRAM 128MBIT 133MHZ 54VFBGA RoHS : Compliant |
| 8,000 | ||
| TC1-33-75G2+ | Mini-Circuits | 1:1 CORE & WIRE TRANSFORMER, 5 - RoHS : Compliant |
| 6,000 | ||
| MT48LC8M16A2P-75:G | Micron Technology Inc | IC SDRAM 128MBIT 133MHZ 54TSOP RoHS : Compliant |
| 3,000 | ||
| MT48LC4M16A2P-75:G TR | Micron Technology Inc | IC SDRAM 64MBIT 133MHZ 54TSOP |
| 2,123 | ||
| TLE4275GV33ATMA1 | Infineon Technologies AG | IC REG LDO 3.3V 0.4A TO263-5 RoHS : Compliant |
| 910 |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Russian ▼ 
English
Chinese
German
Japanese
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand