| поискавой системы для электроныых деталей |
|
74G-AB3-R дистрибьютор |
| дистрибьютор | номер детали | производитель | подробное описание детали | Price | Qty. BuyNow | |
![]() DigiKey | 74LVC1G74GT,115 | Rochester Electronics LLC | IC FF D-TYPE 1-ELE 1-BIT |
| 710,365 | |
| 74LVC1G74GT/S505,115 | Rochester Electronics LLC | IC FF D-TYPE 1-ELE 1-BIT 8-XSON |
| 230,000 | ||
| 74LVC2G74GD,125 | Rochester Electronics LLC | IC FF D-TYPE 1-ELE 1-BIT 8-XSON |
| 142,325 | ||
| SN74GTLP817DWR | Rochester Electronics LLC | IC XLTR MS BIDIR 24-SOIC |
| 26,000 | ||
| SN74GTL2107PWR | Rochester Electronics LLC | IC XLTR MS UNIDIR 28-TSSOP |
| 15,092 | ||
74AVC4T774GUX![]() | Nexperia | IC XLTR VL BIDIR 16-XQFN RoHS : Compliant |
| 3,067 | ||
| BU52074GWZ-E2 | ROHM Semiconductor | MAGNETIC SWITCH OMNIPOLAR RoHS : Compliant |
| 1,236 | ||
| BU52074GWZ-E2 | ROHM Semiconductor | MAGNETIC SWITCH OMNIPOLAR RoHS : Compliant |
| 1,236 | ||
| 5874 GR001 | Alpha Wire | HOOK-UP STRND 24AWG GREEN |
| 1,000 | ||
| MK 203 74 G | Fischer Elektronik GmbH & Co KG | Solder and plug pins, D0.5 mm, A |
| 1,000 | ||
| MK LP 219 74 G | Fischer Elektronik GmbH & Co KG | Low profile, less than 2.7/3.1 m |
| 1,000 | ||
| SN74GTLPH32916KR | Rochester Electronics LLC | IC UNIV BUS TXRX 114-BGA |
| 1,000 | ||
| SL 16 SMD 157 4 G | Fischer Elektronik GmbH & Co KG | 0.635 MM FOR INTERCONNECTION |
| 1,000 | ||
| SL 20 THR 097 4 G | Fischer Elektronik GmbH & Co KG | 0.635 MM, THR SOLDERING TECHNI |
| 1,000 | ||
| EVB90374-GDC-300-REV1.0 | Melexis Microelectronic Integrated Systems | EVAL 90374 NON STRAY-FIELD CONFG |
| 5 | ||
![]() Avnet Americas | 74LVC1G74GT,115![]() | Nexperia | - Tape and Reel (Alt: 74LVC1G74GT,115) RoHS : Compliant | 10,000 | ||
74LVC1G74GS,115![]() | Nexperia | - Tape and Reel (Alt: 74LVC1G74GS,115) RoHS : Compliant |
| 5,000 | ||
74AVC4T774GUX![]() | Nexperia | Transceiver, Translating, 4 Input, 12 ns, 0.8 V to 3.6 V, 16 Pins, XQFN - Tape and Reel (Alt: 74AVC4T774GUX) RoHS : Compliant |
| 4,000 | ||
| 53-77-4G | Boyd Corporation | - Bulk (Alt: 034746) RoHS : Compliant | 3,000 | |||
| 768163474GPTR13 | CTS Corporation | Fixed Network Resistor, 470 kohm, Isolated, 8 Resistors, Gull Wing, ? 2%, 50 V, 300 mW, ? 100ppm/?C - Tape and Reel (Alt: 768163474GPTR13) RoHS : Compliant |
| 2,000 | ||
| RL20S474GB14 | Vishay Intertechnologies | - Bulk (Alt: RL20S474GB14) RoHS : Not Compliant |
| 200 | ||
| ATA6574-GNQW1-VAO | Microchip Technology Inc | CAN Transceiver, 1 TX, 1 RX, 4.5 V to 28 V, 14 Pins, SOIC - Tape and Reel (Alt: ATA6574-GNQW1-VAO) RoHS : Not Compliant |
| 25 | ||
| R574G02605 | Radiall | RF Switch Module SP6T 0Hz to 18GHz 80dB SMA Connector - Bulk (Alt: R574G02605) RoHS : Compliant |
| 0 | ||
| R574G03415 | Radiall | SP4T TERMINATED RAMSES SMA 18GHZ SQUARE - Bulk (Alt: R574G03415) RoHS : Not Compliant |
| 0 | ||
| R574G12325 | Radiall | RF Switch Module SP3T 0Hz to 18GHz 80dB SMA Connector - Bulk (Alt: R574G12325) RoHS : Not Compliant |
| 0 | ||
| RL20S274GRE6 | Vishay Intertechnologies | - Tape and Reel (Alt: RL20S274GRE6) RoHS : Not Compliant |
| 0 | ||
| ZLTMM-112-74-G-D-566 | Samtec Inc | - Bulk (Alt: ZLTMM-112-74-G-D-566) RoHS : Compliant | 0 | |||
| M83723/74G08988(LC) | Amphenol Corporation | Circular Connector, MIL-DTL-83723 Series III, Jam Nut Receptacle, 3 Contacts, Bayonet, 8-98, Gold - Bulk (Alt: M83723/74G08988(LC)) RoHS : Not Compliant |
| 0 | ||
| M83723/74G10028(LC) | Amphenol Corporation | Circular Connector, MIL-DTL-83723 Series III, Jam Nut Receptacle, 2 Contacts, Bayonet, 10-2, Gold - Bulk (Alt: M83723/74G10028(LC)) RoHS : Not Compliant |
| 0 | ||
| M83723/74G10206 | Amphenol Corporation | Circular Connector, MIL-DTL-83723 Series III, Jam Nut Receptacle, 2 Contacts, Crimp Pin, Bayonet - Bulk (Alt: M83723/74G10206) RoHS : Not Compliant |
| 0 | ||
![]() Newark | Z017-4G7C1-11000-E200 | Amphenol Communications Solutions | CLIP,SUS T0.15,HEIGHT 3.4; RoHS : Compliant |
| 90,200 | |
| Z007-4G7L1-11000 | Amphenol Communications Solutions | SPRING,SUS T0.15,HEIGHT 5.2; RoHS : Compliant |
| 45,000 | ||
| Z017-4G7C1-11000-E200 | Amphenol Communications Solutions | CLIP,SUS T0.15,HEIGHT 3.4; RoHS : Compliant |
| 19,700 | ||
| Z007-4G7L1-11000 | Amphenol Communications Solutions | SPRING,SUS T0.15,HEIGHT 5.2; RoHS : Compliant |
| 13,023 | ||
74LVC2G74GT,115![]() | Nexperia | FLIP FLOP, D, -40 TO 125DEG C; RoHS : Compliant |
| 1,540 | ||
74LVC2G74GT,115![]() | Nexperia | FLIP FLOP, D, -40 TO 125DEG C; RoHS : Compliant |
| 1,540 | ||
| TLE4274GV50ATMA2 | Infineon Technologies AG | LDO, AEC-Q100, FIXED, 5V, 0.4A, TO-263-3; RoHS : Compliant |
| 1,173 | ||
| TLE4274GV50ATMA2 | Infineon Technologies AG | LDO, AEC-Q100, FIXED, 5V, 0.4A, TO-263-3; RoHS : Compliant |
| 1,173 | ||
| C1210C274G5JACT500 | KEMET Corporation | CAP, 0.27?F, 50V, 2%, U2J, 1210; RoHS : Compliant |
| 364 | ||
| C1210C274G5JACT500 | KEMET Corporation | CAP, 0.27?F, 50V, 2%, U2J, 1210; RoHS : Compliant |
| 364 | ||
| FMCA2674/GY-72 | Fairview Microwave Inc | COAX CABLE ASSEMBLY; RoHS : Not Compliant |
| 10 | ||
| FMCA2674/GR-36 | Fairview Microwave Inc | COAX CABLE ASSEMBLY; RoHS : Not Compliant |
| 10 | ||
| FMCA2674/GY-12 | Fairview Microwave Inc | CBL ASSY, BNC PLUG-HD BNC PLUG, 12"; RoHS : Not Compliant |
| 10 | ||
| FMCA2674/GR-300 | Fairview Microwave Inc | COAX CABLE ASSEMBLY; RoHS : Not Compliant |
| 10 | ||
| FMCA2674/GY-120 | Fairview Microwave Inc | CBL ASSY, BNC PLUG-HD BNC PLUG, 120"; RoHS : Not Compliant |
| 10 | ||
![]() RS | B74G-4AK-AD1-RMG | Norgren | FILTER/REGULATOR, 1/2" PTF, METAL BOWL, AUTO DRAIN, 5-150 PSI, 5UM, B74G SERIES |
| 40 | |
| B74G-4AK-QD3-RMG | Norgren | FILTER/REGULATOR, 1/2" PTF, METAL BOWL, MAN DRAIN, 5-150 PSI, 40UM, B74G SERIES |
| 26 | ||
| V74G-6AK-NMG | Norgren | PRESSURE RELIEF VALVE, 3/4NPT, 5-150PSI, GAUGE, EXCELON 74 SERIES |
| 3 | ||
| B74G-6AK-AD1-RMG | Norgren | FILTER/REGULATOR, 3/4" PTF, METAL BOWL, AUTO DRAIN, 5-150 PSI, 5UM, B74G SERIES |
| 2 | ||
| B74G-4AK-QD3-RMN | Norgren | FILTER, 1/2" PTF, METAL BOWL, 250PSI, 40UM, MANUAL DRAIN, B74G SERIES |
| 2 | ||
| B74G-4AK-QD1-RMN | Norgren | FILTER/REGULATOR, 1/2" PTF, METAL BOWL, MAN DRAIN, 5-150 PSI, 5UM, B74G SERIES |
| 2 | ||
| B74G-6AK-QD3-RMN | Norgren | FILTER/REGULATOR, 3/4" PTF, METAL BOWL, MAN DRAIN, 5-150 PSI, 40UM, B74G SERIES |
| 2 | ||
| F74G-6AD-AD1 | Norgren | FILTER, GENERAL PURPOSE, 3/4NPT, SERV IND, AUTO DRAIN, 5 MIC, EXCELON |
| 1 | ||
| B74G-6AK-AD3-RMN | Norgren | FILTER, 3/4" PTF, METAL BOWL, 250PSI, 40UM, AUTO DRAIN, B74G SERIES |
| 1 | ||
| B74G-6AK-QD3-RMG | Norgren | FILTER/REGULATOR, 3/4" PTF, METAL BOWL, MAN DRAIN, 5-150 PSI, 40UM, B74G SERIES |
| 1 | ||
| B74G-4AK-AD1-RMN | Norgren | FILTER/REGULATOR, 1/2" PTF, METAL BOWL, AUTO DRAIN, 5-150 PSI, 5UM, B74G SERIES |
| 1 | ||
| B74G-6GK-AP3-RMN | Norgren | FILTER/REGULATOR, 3/4" G, POLY BOWL, AUTO DRAIN, 5-150 PSI, 40UM, B74G SERIES |
| 1 | ||
| B74G-3AK-QP3-RMG | Norgren | FILTER/REGULATOR, 3/8" PTF, POLY BOWL, MAN DRAIN, 5-150 PSI, 40UM, B74G SERIES |
| 1 | ||
| B74G-3AK-AP3-RMG | Norgren | FILTER/REGULATOR, 3/8" PTF, POLY BOWL, AUTO DRAIN, 5-150 PSI, 40UM, B74G SERIES |
| 1 | ||
| B74G-6AK-QD1-RMG | Norgren | FILTER/REGULATOR, 3/4" PTF, METAL BOWL, MAN DRAIN, 5-150 PSI, 5UM, B74G SERIES |
| 1 | ||
![]() Microchip Technology Inc | ATA6574-GNQW1-VAO | Microchip Technology Inc | CAN TRX 5MBit/s w WD, wake-up pin & PN, SOIC, Projected EOL: 2050-11-22 RoHS : Compliant |
| 40,133 | |
| EV74G56A | Microchip Technology Inc | SAM C21 MC DIM, Projected EOL: |
| 145 | ||
| TFS174G | Microchip Technology Inc | TFS174G, Projected EOL: 2050-07-31 - Contact for Pricing RoHS : Compliant | 0 | |||
| MX574GB00000000 | Microchip Technology Inc | 46.0000MHz Ultra-Low Jitter Crystal Oscillator, LLGA, Projected EOL: 2044-08-04 - Contact for Pricing RoHS : Compliant | 0 | |||
| ATA6574-GNQW0-VAO | Microchip Technology Inc | CAN TRX 5MBit/s w WD, wake-up pin & PN, SOIC, Projected EOL: 2050-11-22 RoHS : Compliant |
| 0 | ||
| ATA6574-GNQW1-VAO-VW | Microchip Technology Inc | CAN TRX 5MBit/s w WD, wake-up pin & PN, SOIC, Projected EOL: 2051-08-13 - Contact for Pricing RoHS : Compliant | 0 | |||
![]() Rochester Electronics | 74LVC1G74GT,115![]() | NXP Semiconductors | D Flip-Flop, LVC/LCX/Z Series, 1-Func, Positive Edge Triggered, Complementary Output, CMOS, PDSO8 RoHS : Compliant |
| 710,365 | |
| 74LVC1G74GT/S505,115 | NXP Semiconductors | D Flip-Flop, LVC/LCX/Z Series, 1-Func, Positive Edge Triggered, 1-Bit, Complementary Output, CMOS, PDSO8 RoHS : Compliant |
| 230,000 | ||
74LVC2G74GD,125![]() | NXP Semiconductors | D Flip-Flop, LVC/LCX/Z Series, 1-Func, Positive Edge Triggered, Complementary Output, CMOS, PDSO8 RoHS : Compliant |
| 142,325 | ||
74AUP1G374GW,125![]() | NXP Semiconductors | D Flip-Flop, AUP/ULP/V Series, 1-Func, Positive Edge Triggered, True Output, CMOS, PDSO6 RoHS : Compliant |
| 366,150 | ||
74AVC4T774GUX![]() | Nexperia | Voltage Level Translator Bidirectional Tri-State, Non-Inverted 16-QFN T/R RoHS : Compliant |
| 7,680 | ||
74LVC1G74GT,115![]() | Nexperia | D Flip-Flop, LVC/LCX/Z Series, 1-Func, Positive Edge Triggered, Complementary Output, CMOS, PDSO8 RoHS : Compliant |
| 323,503 | ||
| 74LVC1G74GT/S505,115 | Nexperia | D Flip-Flop, LVC/LCX/Z Series, 1-Func, Positive Edge Triggered, 1-Bit, Complementary Output, CMOS, PDSO8 RoHS : Compliant |
| 75,000 | ||
74LVC2G74GD,125![]() | Nexperia | D Flip-Flop, LVC/LCX/Z Series, 1-Func, Positive Edge Triggered, Complementary Output, CMOS, PDSO8 RoHS : Compliant |
| 297,000 | ||
74AUP1G374GW,125![]() | Nexperia | D Flip-Flop, AUP/ULP/V Series, 1-Func, Positive Edge Triggered, True Output, CMOS, PDSO6 RoHS : Compliant |
| 57,000 | ||
CS5174GDR8G![]() | onsemi | Switching Regulator, Current-mode, 2.4A, 620kHz Switching Freq-Max, BIPolar, PDSO8 RoHS : Compliant |
| 10 | ||
TLE4274GV85ATMA1![]() | Infineon Technologies AG | Linear Voltage Regulator RoHS : Compliant |
| 44,044 | ||
SN74GTL2107PWR![]() | Texas Instruments | Voltage Level Translator Bidirectional Non-Inverted 28-SOP T/R RoHS : Compliant |
| 15,092 | ||
SN74GTLP817DWR![]() | Texas Instruments | Bus Driver, GTLP Series, 1-Func, 1-Bit, Inverted Output, CMOS, PDSO24 RoHS : Compliant |
| 26,000 | ||
| SN74GTLPH32916KR | Texas Instruments | Registered Bus Transceiver, GTLP Series, 1-Func, 18-Bit, True Output, BICMOS, PBGA114 ' RoHS : Not Compliant |
| 1,000 | ||
SN74GTL2107PW![]() | Texas Instruments | Voltage Level Translator Bidirectional Non-Inverted 28-SOP Tube RoHS : Compliant |
| 32,169 | ||
![]() Sager | LW6J-3C74GRG | IDEC Corporation | Keylock Switches Key Selector Switch ILL |
| 0 | |
| 3173X0074G6 | ABB Group | P/L:POWER MAX CTRL SING PHS |
| 0 | ||
| ZLTMM-112-74-G-D-566 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| LW6J-3C74GRH | IDEC Corporation | Keylock Switches Key Selector Switch ILL |
| 0 | ||
| 53-77-4G | BOYD Laconia | Thermal Interface Products Thermalsil III Pad for TO-220, Grey/Green, 19.05x12.70x 0.152mm, Silicone Rubber RoHS : Compliant | 0 | |||
| LW6L-A2C74G | IDEC Corporation | Pushbutton Switches 25mm Pushbutton Illuminated RoHS : Compliant |
| 0 | ||
| LW6MJ-31C74GRD | IDEC Corporation | Keylock Switches Key Selector Switch ILL |
| 0 | ||
| IDSD-33-D-78.74-G-R | Samtec Inc | Ribbon Cables / IDC Cables RoHS : Compliant | 0 | |||
| LW6L-A1C74G | IDEC Corporation | Pushbutton Switches 25mm Pushbutton Illuminated RoHS : Compliant |
| 0 | ||
| LW7F-21C74G | IDEC Corporation | Control Switches 25mm Selector Switch Lighted RoHS : Compliant |
| 0 | ||
| LW6J-32C74GGC | IDEC Corporation | Keylock Switches Key Selector Switch ILL | 0 | |||
| LW6J-3C74GGE | IDEC Corporation | Keylock Switches Key Selector Switch ILL | 0 | |||
| LW6MJ-32C74GGH | IDEC Corporation | Keylock Switches Key Selector Switch ILL | 0 | |||
| ZLTMM-104-74-G-D-512 | Samtec Inc | Headers & Wire Housings RoHS : Compliant | 0 | |||
| ZLTMM-107-74-G-D-540 | Samtec Inc | Headers & Wire Housings 2.00 mm Shrouded Variable Stack Height Terminal Strip RoHS : Compliant |
| 0 | ||
![]() TME | BU52074GWZ-E2 | ROHM Semiconductor | Sensor: Hall; omnipolar; SMT; Temp: -40÷85°C RoHS : Compliant |
| 3,325 | |
| 76108-74G | KING TONY | Centre punch; with holder |
| 3 | ||
| 76303-74G | KING TONY | Puncher; Ø: 3mm; Tool length: 185mm |
| 0 | ||
| B951074 GE033 | Alpha Wire | Wire; Pro-Tekt; 7x28AWG; PVC; dark grey; 300V; 100m; 328ft |
| 0 | ||
| 5874 GR005 | Alpha Wire | Wire; HookUp Wire; stranded; Cu; 24AWG; PTFE; green; 1kV; 30.5m |
| 0 | ||
| 76106-74G | KING TONY | Centre punch; with holder |
| 0 | ||
| 76110-74G | KING TONY | Centre punch; with holder |
| 0 | ||
| B963274 GE033 | Alpha Wire | Wire; Pro-Tekt; 27x2x24AWG; PVC; dark grey; 300V; 100m; 328ft |
| 0 | ||
| NSYPLAT574G | Schneider Electric | Enclosure: wall mounting; X: 500mm; Y: 750mm; Z: 420mm; Thalassa PLA |
| 0 | ||
| 0034.3774.G | Schurter Electronic Components | Fuse: fuse; glass; clip-on; 800mA; 250VAC; time-lag; FSL RoHS : Compliant |
| 0 | ||
| 6374G1 | Anderson Power Products | Connector: DC supply; female; 0.175kA; 0.6kV; straight RoHS : Compliant |
| 0 | ||
| B964274 GE033 | Alpha Wire | Wire; Pro-Tekt; 27x2x22AWG; PVC; dark grey; 300V; 100m; 328ft |
| 0 | ||
| 76304-74G | KING TONY | Puncher; Ø: 4mm; Tool length: 185mm |
| 0 | ||
| BE7274G/46 | Beta Electric | Boots; Size: 46; grey; leather; slip,impact; FITEVOLUTION |
| 0 | ||
| 76305-74G | KING TONY | Puncher; Ø: 5mm; Tool length: 185mm |
| 0 | ||
![]() Ameya Holding Limited | 74LVC1G74GT,115![]() | Nexperia | 74LVC Series 5.5 V SMT Single D-type Flip-Flop with Set Reset - XSON-8 RoHS : Compliant | 93,358 | ||
SN74GTL2003PW![]() | Texas Instruments | IC XLATR BIDIR 8BIT LV 20TSSOP RoHS : Compliant | 1,050 | |||
| BU52074GWZ-E2 | ROHM Semiconductor | RoHS : Compliant |
| 100 | ||
![]() ComSIT USA | TLE4274GV10![]() | Infineon Technologies AG | LOW-DROP VOLTAGE REGULATOR Fixed Positive LDO Regulator, 10V, 0.5V Dropout, BIPolar, PSSO3 RoHS : Not Compliant | 34,440 | ||
TLE4274GV50![]() | Infineon Technologies AG | LOW-DROP VOLTAGE REGULATOR Fixed Positive LDO Regulator, 5V, 0.5V Dropout, BIPolar, PSSO3 RoHS : Compliant | 7,000 | |||
TLE4274GSV33![]() | Infineon Technologies AG | VOLTAGE REGULATOR Fixed Positive LDO Regulator, 3.3V, 1.2V Dropout, BIPolar, PDSO4 RoHS : Compliant | 6,767 | |||
| 2SA1774G | onsemi | PNP SILICON GENERAL PURPOSE AMPLIFIER TRANSISTOR Small Signal Bipolar Transistor, 0.1A I(C), 50V V(BR)CEO, 1-Element, PNP, Silicon RoHS : Compliant | 3,000 | |||
| TNY274GNTL | Power Integrations | Energy-Efficient, Off-Line Switcher with Enhanced Flexibility and Extended Power Range Switching Regulator, Current-mode, 0.273A, 140kHz Switching Freq-Max, PDSO7 RoHS : Compliant | 1,075 | |||
| UPD780824BGCA374GADE2AX | Renesas Electronics Corporation | Electronic Component RoHS : Compliant | 970 | |||
| TLE4274GSV33GEG | Infineon Technologies AG | VOLTAGE REGULATOR Fixed Positive LDO Regulator, 3.3V, 1.2V Dropout, PDSO4 RoHS : Not Compliant | 797 | |||
SN74GTL1655DGGR![]() | Texas Instruments | Registered Bus Transceiver, GTL/TVC Series, 2-Func, 8-Bit, True Output, BICMOS, PDSO64 RoHS : Compliant | 440 | |||
TNY274GN![]() | Power Integrations | ENERGY-EFFICIENT, OFF-LINE SWITCHER Switching Regulator, Current-mode, 0.273A, 140kHz Switching Freq-Max, PDSO7 RoHS : Compliant | 138 | |||
| 74GTL1655DGG | Texas Instruments | Universal Bus Universal Bus Transceiver 16 Bits 3.3V 64-SOP RoHS : Compliant | 25 | |||
| UPD78F0374GK8EU | NEC Electronics Group | 8-BIT SINGLE-CHIP MICROCONTROLLER WITH LCD CONTROLLER/DRIVER Microcontroller, 8-Bit, FLASH, 20MHz, CMOS, PQFP80 RoHS : Compliant | 20 | |||
| 74GTL16612DL | Texas Instruments | Universal Bus Universal Bus Transceiver 18 Bits 3.3V 56-SOP Tube RoHS : Compliant | 19 | |||
![]() NexGen Digital | BU46L274G-TL | ROHM Semiconductor | RoHS : Compliant | 3,000 | ||
| BU45K274G-TL | ROHM Semiconductor | RoHS : Compliant | 2,950 | |||
| BU46K274G-TL | ROHM Semiconductor | RoHS : Compliant | 2,950 | |||
| SI8274GB1-IS1R | Skyworks Solutions Inc | RoHS : Compliant | 2,500 | |||
| SMC10.2 274G50A31 | KEMET Corporation | 165 | ||||
![]() PEI Genesis | M83723/74G10206 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | |
| M83723/74G1412Y | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| M83723/74G2025N | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| M83723/74G2232N | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| M83723/74G24436 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| M83723/74G803N | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| M83723/74G14077 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| M83723/74G14158 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| M83723/74G24616 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| AE83374G10028 | Aero-Electric Connector Inc |
| 0 | |||
| AE83374G18147 | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| AE83374G22557 | Aero-Electric Connector Inc | RoHS : Compliant |
| 0 | ||
| AE83374G8038 | Aero-Electric Connector Inc |
| 0 | |||
| M83723/74G10026 | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
| M83723/74G1404N | Aero-Electric Connector Inc | RoHS : Not Compliant |
| 0 | ||
![]() Richardson RFPD | SI5350C-B12774-GT | Skyworks Solutions Inc | Clock Generator 10MHz to 100MHz-IN 200MHz-OUT 10-P RoHS : Compliant | 0 | ||
| SI8274GA1D-IM1R | Skyworks Solutions Inc | 4 Amp Iso-driver with High Transient Immunity RoHS : Compliant |
| 0 | ||
| SI5335A-B14874-GM | Skyworks Solutions Inc | Web Customizable, Any Frequency, Any Output Quad C RoHS : Compliant | 0 | |||
| SI5335D-B10574-GMR | Skyworks Solutions Inc | Clock Generator 10MHz to 350MHz-IN 200MHz-OUT 24-P RoHS : Compliant | 0 | |||
| SI5340D-D08074-GMR | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 350MHz-OUT 44-P RoHS : Compliant | 0 | |||
| SI5344A-D11974-GM | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 1028MHz-OUT RoHS : Compliant | 0 | |||
| SI5345B-D11174-GM | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 350MHz-OUT 6 RoHS : Compliant | 0 | |||
| SI5351A-B14674-GMR | Skyworks Solutions Inc | Clock Generator 25MHz to 27MHz-IN 200MHz-OUT 20-Pi RoHS : Compliant | 0 | |||
| SI5395B-A08974-GMR | Skyworks Solutions Inc | Clock Generator 0.008MHz to 750MHz-IN 350MHz-OUT 6 RoHS : Compliant | 0 | |||
| SI5341A-D08174-GMR | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 1028MHz-OUT 64- RoHS : Compliant | 0 | |||
| SI5338C-B14074-GM | Skyworks Solutions Inc | Quad Clock Generator RoHS : Compliant | 0 | |||
| SI5338N-B07974-GM | Skyworks Solutions Inc | Clock Generator 5MHz to 710MHz-IN 710MHz-OUT 24-Pi RoHS : Compliant | 0 | |||
| SI5344D-D13574-GM | Skyworks Solutions Inc | 10 Channel, Any Frequency, Any Output Jitter Atten RoHS : Compliant | 0 | |||
| SI5338C-B14574-GM | Skyworks Solutions Inc | Quad Clock Generator RoHS : Compliant | 0 | |||
| SI5340D-D11274-GM | Skyworks Solutions Inc | Clock Generator 10MHz to 750MHz-IN 350MHz-OUT 44-P RoHS : Compliant | 0 | |||
![]() Chip 1 Exchange | 2SA1774GZTLQ | ROHM Semiconductor | INSTOCK | 15,000 | ||
| RT9074GSP | Richtek Technology Corp | INSTOCK RoHS : Compliant | 7,500 | |||
| TNY274GN | POWIN | INSTOCK | 6,295 | |||
| BF074G0683K6V | INSTOCK | 5,300 | ||||
| RSSMOS-2W-274G-ALP | Alpha Wire | INSTOCK | 2,592 | |||
| BF074G0683K6V | Tantalum Pellet Company (TPC) | INSTOCK | 1,250 | |||
| 74G1287 | Cypress Semiconductor | INSTOCK | 800 | |||
| RL07S474G | INSTOCK | 417 | ||||
| RL07S274G | BEISE | INSTOCK | 336 | |||
| RL07S274G | INSTOCK | 336 | ||||
| 63030DE00-074-G | INSTOCK | 200 | ||||
TLE4274GSV25![]() | Infineon Technologies AG | INSTOCK RoHS : Compliant | 32 | |||
| 767143474G | CTS Corporation | INSTOCK RoHS : Not Compliant | 12 | |||
| SN74GTL1655DGGR | INSTOCK | 12 | ||||
TLE4274GSV33![]() | Infineon Technologies AG | INSTOCK RoHS : Compliant | 2 | |||
![]() Avnet Abacus | 766163274GP | CTS Corporation | Fixed Network Resistor 270 kohm Isolated 8 Resistors Gull Wing 2 50 V 240 mW 100ppmC (Alt: 766163274GP) RoHS : Compliant | 0 | ||
| BN074G0223K | Kyocera AVX Components | (Alt: BN074G0223K) RoHS : Compliant | 0 | |||
| 766143474GP | CTS Corporation | Fixed Network Resistor 470 kohm Isolated 7 Resistors Gull Wing 2 50 V 240 mW 100ppmC (Alt: 766143474GP) RoHS : Compliant | 0 | |||
| B67374GX187 | TDK Corporation | Ferrite Core U Core 141mm 30mm 785mm General Application (Alt: B67374G0000X187) RoHS : Compliant | 0 | |||
| 766141474GP | CTS Corporation | Fixed Network Resistor 470 kohm Bussed 13 Resistors Gull Wing 2 50 V 120 mW 100ppmC (Alt: 766141474GP) RoHS : Compliant | 0 | |||
| 768143274GP | CTS Corporation | Fixed Network Resistor 270 kohm Isolated 7 Resistors Gull Wing 2 50 V 300 mW 100ppmC (Alt: 768143274GP) RoHS : Compliant | 0 | |||
| 752091474GP | CTS Corporation | Fixed Network Resistor 470 kohm Bussed 2 25 V 120 mW 200ppmC Array Thick Film (Alt: 752091474GP) RoHS : Compliant | 0 | |||
| 767163274GP | CTS Corporation | Fixed Network Resistor 270 kohm Isolated 8 Resistors Gull Wing 2 50 V 300 mW 100ppmC (Alt: 767163274GP) RoHS : Compliant | 0 | |||
| CA70C1474GMT | CTS Corporation | - Tape and Reel (Alt: CA70C1474GMT) RoHS : Compliant | 0 | |||
| BF074G0683KDA | Kyocera AVX Components | (Alt: BF074G0683KDA) RoHS : Not Compliant | 0 | |||
| 768143274GPTR13 | CTS Corporation | Fixed Network Resistor 270 kohm Isolated 7 Resistors Gull Wing 2 50 V 300 mW 100ppmC - Tape and Reel (Alt: 768143274GPTR13) RoHS : Compliant | 0 | |||
| 768163474GPTR13 | CTS Corporation | Fixed Network Resistor 470 kohm Isolated 8 Resistors Gull Wing 2 50 V 300 mW 100ppmC - Tape and Reel (Alt: 768163474GPTR13) RoHS : Compliant | 0 | |||
| 766141274GPTR13 | CTS Corporation | Fixed Network Resistor 270 kohm Bussed 13 Resistors Gull Wing 2 50 V 120 mW 100ppmC - Tape and Reel (Alt: 766141274GPTR13) RoHS : Compliant | 0 | |||
| 767163274GPTR13 | CTS Corporation | Fixed Network Resistor 270 kohm Isolated 8 Resistors Gull Wing 2 50 V 300 mW 100ppmC - Tape and Reel (Alt: 767163274GPTR13) RoHS : Compliant | 0 | |||
| NTCS0805E3474GXT | Vishay Intertechnologies | (Alt: NTCS0805E3474GXT) RoHS : Compliant | 0 | |||
![]() Avnet Asia | 74AVC4T774GUX![]() | Nexperia | Transceiver, Translating, 4 Input, 12 ns, 0.8 V to 3.6 V, 16 Pins, XQFN (Alt: 74AVC4T774GUX) RoHS : Compliant | 0 | ||
74LVC1G74GT,115![]() | Nexperia | (Alt: 74LVC1G74GT,115) RoHS : Compliant | 0 | |||
| RMC74-G218 | Amphenol Corporation | (Alt: RMC74-G218) RoHS : Compliant | 0 | |||
| 74AVC4T774GU-Q100X | Nexperia | Voltage Level Translator CMOS/LVTTL 16-Pin XQFN T/R (Alt: 74AVC4T774GU-Q100X) RoHS : Compliant | 0 | |||
74AUP1G74GN,115![]() | Nexperia | Flip Flop, 74AUP1G74, D, 5.8 ns, 619 MHz, 4 mA, 8 Pins, XSON (Alt: 74AUP1G74GN,115) RoHS : Compliant |
| 0 | ||
TNY274GN-TL![]() | Power Integrations | (Alt: TNY274GN-TL) RoHS : Compliant | 0 | |||
| UPC4574G2-A | Renesas Electronics Corporation | (Alt: UPC4574G2-A) RoHS : Compliant | 0 | |||
74LVC2G74GT,115![]() | Nexperia | Flip Flop, 74LVC2G74, D, 4.1 ns, 280 MHz, 32 mA, 8 Pins, XSON (Alt: 74LVC2G74GT,115) RoHS : Compliant | 0 | |||
| RMC74-G222 | Amphenol Corporation | (Alt: RMC74-G222) RoHS : Compliant | 0 | |||
74AUP1G74GT,115![]() | Nexperia | (Alt: 74AUP1G74GT,115) RoHS : Compliant | 0 | |||
| RMC74-G220 | Amphenol Corporation | (Alt: RMC74-G220) RoHS : Compliant | 0 | |||
| RMC74-G219 | Amphenol Corporation | (Alt: RMC74-G219) RoHS : Compliant | 0 | |||
74AUP1G74GS,115![]() | Nexperia | (Alt: 74AUP1G74GS,115) RoHS : Compliant | 0 | |||
UPD78F0474GK-GAK-AX![]() | Renesas Electronics Corporation | (Alt: UPD78F0474GK-GAK-AX) RoHS : Compliant | 0 | |||
| S2SA1774G | onsemi | Bipolar (BJT) Single Transistor, PNP, 50 V, 100 mA, 150 mW, SOT-416, Surface Mount (Alt: S2SA1774G) RoHS : Compliant | 0 | |||
![]() Avnet Silica | 74AUP1G74GT,115![]() | Nexperia | (Alt: 74AUP1G74GT,115) RoHS : Compliant | 20,000 | ||
74LVC2G74GS,115![]() | Nexperia | (Alt: 74LVC2G74GS,115) RoHS : Compliant | 10,000 | |||
74LVC1G74GS,115![]() | Nexperia | (Alt: 74LVC1G74GS,115) RoHS : Compliant | 5,000 | |||
| ATA6574-GNQW0-VAO | Microchip Technology Inc | CAN Transceiver 1 TX 1 RX 45 V to 28 V 14 Pins SOIC (Alt: ATA6574-GNQW0-VAO) RoHS : Compliant | 25 | |||
| MP174GJ-P | Monolithic Power Systems | (Alt: MP174GJ-P) RoHS : Compliant | 0 | |||
| BD6874GSW-E2 | ROHM Semiconductor | 2Channel Stepping Motor Driver 25V to 55V 16Pin BGA Embossed TR (Alt: BD6874GSW-E2) RoHS : Compliant | 0 | |||
74AUP1G74GXX![]() | Nexperia | (Alt: 74AUP1G74GXX) RoHS : Compliant | 0 | |||
| BD6874GLS-E2 | ROHM Semiconductor | 2CH STEPPING MOTOR DRIVER (Alt: BD6874GLS-E2) RoHS : Compliant | 0 | |||
74AVC4T774GUX![]() | Nexperia | Transceiver Translating 4 Input 12 ns 08 V to 36 V 16 Pins XQFN (Alt: 74AVC4T774GUX) RoHS : Compliant | 0 | |||
74LVC1G74GT,115![]() | Nexperia | (Alt: 74LVC1G74GT,115) RoHS : Compliant | 0 | |||
74AUP1G74GN,115![]() | Nexperia | Flip Flop 74AUP1G74 D 58 ns 619 MHz 4 mA 8 Pins XSON (Alt: 74AUP1G74GN,115) RoHS : Compliant | 0 | |||
74AUP1G374GW,125![]() | Nexperia | Flip Flop 74AUP1G374 D 58 ns 619 MHz 4 mA 6 Pins TSSOP (Alt: 74AUP1G374GW,125) RoHS : Compliant | 0 | |||
74AUP1G374GM,115![]() | Nexperia | Flip Flop 74AUP1G374 D 58 ns 619 MHz 4 mA 6 Pins XSON (Alt: 74AUP1G374GM,115) RoHS : Compliant | 0 | |||
74AUP1G374GM,132![]() | Nexperia | Flip Flop 74AUP1G374 D 58 ns 619 MHz 4 mA 6 Pins XSON (Alt: 74AUP1G374GM,132) RoHS : Compliant | 0 | |||
| 74AVC4T774GU-Q100X | Nexperia | Voltage Level Translator CMOSLVTTL 16Pin XQFN TR (Alt: 74AVC4T774GU-Q100X) RoHS : Compliant | 0 | |||
![]() DB Roberts | 1374GF | Heyco | SR 15-1 GREY 2N2993 | 0 | ||
![]() EBV Elektronik | TNY274GN-TL![]() | Power Integrations | (Alt: TNY274GN-TL) RoHS : Compliant | 18,000 | ||
| S2SA1774G | onsemi | Bipolar BJT Single Transistor PNP 50 V 100 mA 150 mW SOT416 Surface Mount (Alt: S2SA1774G) RoHS : Compliant | 0 | |||
| TNY274GN0152-TL | Power Integrations | PWRTNY274GN0152TL (Alt: TNY274GN0152-TL) RoHS : Compliant | 0 | |||
| TLE4274GV50ATMA2 | Infineon Technologies AG | Fixed LDO Voltage Regulator AECQ100 55V to 40V 250mV Dropout 5V400mA out TO2633 (Alt: SP001130096) RoHS : Compliant | 0 | |||
| TLE4274GV10ATMA2 | Infineon Technologies AG | Low Drop Linear Voltage Regulator Pos 10V 04A 3Pin TO263 TR (Alt: SP001130100) RoHS : Compliant | 0 | |||
| TLE4274GSV33HTSA2 | Infineon Technologies AG | Low Drop Linear Voltage Regulator SD none Std MPP (Alt: SP001130104) RoHS : Compliant | 0 | |||
| TLE4274GSV25HTSA2 | Infineon Technologies AG | Standard Regulator Pos 25V 04A 4Pin SOT223 (Alt: SP001130106) RoHS : Compliant | 0 | |||
| TLE4274GSV25HTMA1 | Infineon Technologies AG | LDO Voltage Regulator 400mA 25V 4Pin SOT223 TR (Alt: SP005122436) RoHS : Compliant | 0 | |||
| ATA6574-GNQW0-VAO | Microchip Technology Inc | CAN Transceiver 1 TX 1 RX 45 V to 28 V 14 Pins SOIC (Alt: ATA6574-GNQW0-VAO) RoHS : Compliant | 0 | |||
| TLE4274GSV33HTMA1 | Infineon Technologies AG | LDO Regulator Positive 33V 400mA 4Pin SOT223 TR (Alt: SP004565652) RoHS : Compliant | 0 | |||
| ATA6574-GNQW1-VAO | Microchip Technology Inc | CAN Transceiver 1 TX 1 RX 45 V to 28 V 14 Pins SOIC (Alt: ATA6574-GNQW1-VAO) RoHS : Compliant | 0 | |||
![]() Flip Electronics | S2SA1774G | onsemi | Stock, Ship Today RoHS : Compliant | 77,970 | ||
![]() Maritex | TL074G-S14-R![]() | Unisonic Technologies Co Ltd | Operational Amplifiers; TL074G-S14-R; UTC RoHS : Compliant |
| 2,396 | |
U74HC574G-P20-R![]() | Unisonic Technologies Co Ltd | Flip Flops; U74HC574G-P20-R; UTC RoHS : Compliant |
| 76 | ||
![]() Master Electronics | 53-77-4G | BOYD Laconia | Thrml Mgmt Access Thermal Pad Gray-Green 0.92W/m.A°C 5.7X10e15Ohm.cm Bulk RoHS : Compliant |
| 3,335 | |
| LW6J-3C74GRG | IDEC Corporation | KEY SELECTOR SWITCH ILL RoHS : Compliant |
| 0 | ||
| ZLTMM-112-74-G-D-566 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| ZSTMM-108-74-G-D-250 | Samtec Inc | RoHS : Compliant |
| 0 | ||
| LW6J-3C74GRH | IDEC Corporation | KEY SELECTOR SWITCH ILL RoHS : Compliant |
| 0 | ||
| LW6J-2C74GGC-501 | IDEC Corporation | KEY SELECTOR SWITCH ILL RoHS : Compliant |
| 0 | ||
| LW6L-A2C74G | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| LW6MJ-31C74GRD | IDEC Corporation | KEY SELECTOR SWITCH ILL RoHS : Compliant |
| 0 | ||
| IDMD-14-T-19.74-G | Samtec Inc | RoHS : Compliant |
| 0 | ||
| IDSD-32-S-11.74-G | Samtec Inc | RoHS : Compliant |
| 0 | ||
| IDSD-33-D-78.74-G-R | Samtec Inc | .100 Slim Body Double Row IDC Ribbon Cable Assembly Socket RoHS : Compliant |
| 0 | ||
| LW6L-A1C74G | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| LW7F-21C74G | IDEC Corporation | RoHS : Compliant |
| 0 | ||
| LW6J-32C74GGC | IDEC Corporation | KEY SELECTOR SWITCH ILL RoHS : Compliant |
| 0 | ||
| LW6J-3C74GGE | IDEC Corporation | KEY SELECTOR SWITCH ILL RoHS : Compliant |
| 0 | ||
![]() Neutron USA | R74G-4AK-RMN | Norgren | Norgren R74G-4AK-RMN Regulator, 1/2" PTF, 220 scfm, 5 to 150 psig, Knob, R74G Series |
| 47 | |
| B74G-4AK-AD1-RMG | Norgren | Norgren B74G-4AK-AD1-RMG Filter/Regulator, 1/2" PTF, Metal Bowl, Auto Drain, 5-150 PSI, 5um, B74G Series |
| 40 | ||
| B74G-4AK-AD3-RMG | Norgren | Norgren B74G-4AK-AD3-RMG Filter/Regulator, 1/2" PTF, Metal Bowl, Auto Drain, 5-150 PSI, 40um, B74G Series |
| 28 | ||
| R74G-6AK-RMG | Norgren | Regulator, 3/4" PTF, 220 SCFM, 5 to 150 psig, Gauge, Knob, R74G Series |
| 23 | ||
| B74G-6AK-AD3-RMG | Norgren | Norgren B74G-6AK-AD3-RMG Filter/Regulator, 3/4" PTF, Metal Bowl, Auto Drain, 5-150 PSI, 40um, B74G Series |
| 19 | ||
| B74G-4AK-QD3-RMG | Norgren | Norgren B74G-4AK-QD3-RMG Filter/Regulator, 1/2" PTF, Metal Bowl, Man Drain, 5-150 PSI, 40um, B74G Series |
| 14 | ||
| B74G-4AK-AD3-RMN | Norgren | Norgren B74G-4AK-AD3-RMN Filter, 1/2" PTF, Metal Bowl, 250psi, 40um, Auto Drain, B74G Series |
| 11 | ||
| F74G-3AN-QP3 | Norgren | Norgren F74G-3AN-QP3 Filter, 3/8" PTF, Poly Bowl, 150 psig, Manual Drain, 40um, 65 scfm, F74 Series |
| 6 | ||
| F74G-4AN-AP3 | Norgren | Norgren F74G-4AN-AP3 Filter, 1/2" PTF, Poly Bowl, 150 psig, Auto Drain, 40um, 140 scfm, F74 Series |
| 6 | ||
| B74G-4AK-AP1-RMG | Norgren | Norgren B74G-4AK-AP1-RMG Filter/Regulator, 1/2" PTF, Poly Bowl, Auto Drain, 5-150 PSI, 5um, B74G Series |
| 4 | ||
| B74G-6AK-AD1-RMG | Norgren | Norgren B74G-6AK-AD1-RMG Filter/Regulator, 3/4" PTF, Metal Bowl, Auto Drain, 5-150 PSI, 5um, B74G Series |
| 2 | ||
| R74G-4GK-RMN | Norgren | Norgren R74G-4GK-RMN Regulator, 1/2" G, 220 scfm, 5 to 150 psig, Knob, R74G Series |
| 2 | ||
| B67374G0000X197 | TDK Corporation | FERRITE CORE U N97 1PC RoHS : Compliant |
| 0 | ||
| 2702774, GW EIP/ASCII 2E/2DB9 | Phoenix Contact | Phoenix Contact 2702774 Device Server, RAW/ASCII to Ethernet IP Gateway, 2 Ethernet RJ45, 2 Serial Port |
| 0 | ||
| R74G-6AK-RMN | Norgren | Norgren R74G-6AK-RMN Regulator, 3/4" PTF, 220 scfm, 5 to 150 psig, Knob, R74G Series |
| 0 | ||
![]() Pasternack Enterprises US | PE3C8874/GY | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GY coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/GY, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/GY is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/GY can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GY coax. | 419 | ||
| PE3C8874/GR | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 0 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/GR, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/GR is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/GR can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable using 75 Ohm 1855A-GR coax. | 416 | |||
| PE3C8874/GR-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1855A-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/GR-120, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/GR-120 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/GR-120 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1855A-GR coax. |
| 89 | ||
| PE3C8874/GR-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1855A-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/GR-36, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/GR-36 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/GR-36 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1855A-GR coax. |
| 89 | ||
| PE3C8874/GY-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1855A-GY coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/GY-12, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/GY-12 is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/GY-12 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1855A-GY coax. |
| 89 | ||
| PE3C8874/GY-36 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 36 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 36 Inch Length Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1855A-GY coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/GY-36, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/GY-36 is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/GY-36 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 36 inch length using 75 Ohm 1855A-GY coax. |
| 89 | ||
| PE3C8874/GY-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1855A-GY coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/GY-72, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/GY-72 is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/GY-72 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1855A-GY coax. |
| 89 | ||
| PE3C8874/GY-120 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 120 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 120 Inch Length Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1855A-GY coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/GY-120, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/GY-120 is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/GY-120 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 120 inch length using 75 Ohm 1855A-GY coax. |
| 89 | ||
| PE3C8874/GR-72 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 72 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 72 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1855A-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/GR-72, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/GR-72 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/GR-72 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 72 inch length using 75 Ohm 1855A-GR coax. |
| 89 | ||
| PE3C8874/GR-12 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 12 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 12 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1855A-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/GR-12, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/GR-12 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/GR-12 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 12 inch length using 75 Ohm 1855A-GR coax. |
| 89 | ||
| PE3C8874/GY-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GY, RF Cable Type: Belden 1855A-GY, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1855A-GY Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1855A-GY coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1855A-GY coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/GY-300, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/GY-300 is built with Belden 1855A-GY which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/GY-300 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1855A-GY coax. |
| 63 | ||
| PE3C8874/GR-300 | Pasternack Enterprises | Key Specifications, Connector 1 Series: HD-BNC, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector 1 Impedance: 75 Ohm, Connector 2 Series: 1.0/2.3, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector 2 Impedance: 75 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: 1855A-GR, RF Cable Type: Belden 1855A-GR, RF Cable Impedance: 75 Ohm, Length, Max: 300 inches. 75 Ohm HD-BNC Male to 75 Ohm 1.0/2.3 Male 6G SDI Cable 300 Inch Length Using 75 Ohm 1855A-GR Coax., Radio frequency assembly 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1855A-GR coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. The 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1855A-GR coax, HD-BNC cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom HD-BNC to 1.0/2.3 cable assembly orders will ship same day as well. Pasternack RF coax 6G SDI cable assembly is built with HD-BNC cable connection on one end and 1.0/2.3 cable connection on the other. Our 6G SDI HD-BNC to 1.0/2.3 cable assemblies have a male gender on end 1 and male on end 2. This HD-BNC to 1.0/2.3 cable is a male to male coax assembly, PE3C8874/GR-300, can also be known as a 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly and will be shipped same-day as it is purchased. Typical applications for the assembly include 4K video transmission, broadband and broadcast UHDTV A/V, medical equipment, HD cameras, and many more requiring high-speed video. HD-BNC plug to 1.0/2.3 plug cable assembly PE3C8874/GR-300 is built with Belden 1855A-GR which is a flexible coax type. The Pasternack flexible HD-BNC cable assembly is manufactured with HD-BNC to 1.0/2.3 cable connectors, has a 75 Ohm impedance and is single shielded. RF specs on this 6 GHz maximum frequency HD-BNC male to 1.0/2.3 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. The product features data transfer rates of 6 Gb/s for high resolution uncompressed video signal transmission and compatibility with SMPTE Standard 2081-1. PE3C8874/GR-300 can also be used in the other direction and will be 1.0/2.3 male to HD-BNC male cable assembly if the opposite connectivity is required. 6G SDI HD-BNC plug to 1.0/2.3 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality HD-BNC to 1.0/2.3 cable assembly for quick shipment worldwide. Variations of HD-BNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this 75 Ohm HD-BNC male to 75 Ohm 1.0/2.3 male 6G SDI cable 300 inch length using 75 Ohm 1855A-GR coax. |
| 60 | ||
![]() Venkel Ltd. | MEHF0204-TK-1R74GT | VENKEL LTD | High Frequency MELF;0204;1/4W;�100PPM;1.74R�2% RoHS : Not Compliant | 0 | ||
| MEHF0204-ZK-1R74GT | VENKEL LTD | High Frequency MELF;0204;2/5W;�100PPM;1.74R�2% RoHS : Not Compliant | 0 | |||
| MEHF0204-ZK-2R74GT | VENKEL LTD | High Frequency MELF;0204;2/5W;�100PPM;2.74R�2% RoHS : Not Compliant | 0 | |||
| MEHF0204-TK-3R74GT | VENKEL LTD | High Frequency MELF;0204;1/4W;�100PPM;3.74R�2% RoHS : Not Compliant | 0 | |||
| MEHF0204-ZK-3R74GT | VENKEL LTD | High Frequency MELF;0204;2/5W;�100PPM;3.74R�2% RoHS : Not Compliant | 0 | |||
| MEHF0204-ZC-1R74GT | VENKEL LTD | High Frequency MELF;0204;2/5W;�50PPM;1.74R�2% RoHS : Not Compliant | 0 | |||
| MEHF0204-ZC-2R74GT | VENKEL LTD | High Frequency MELF;0204;2/5W;�50PPM;2.74R�2% RoHS : Not Compliant | 0 | |||
| MEHF0204-TC-3R74GT | VENKEL LTD | High Frequency MELF;0204;1/4W;�50PPM;3.74R�2% RoHS : Not Compliant | 0 | |||
| MEHF0204-TK-2R74GT | VENKEL LTD | High Frequency MELF;0204;1/4W;�100PPM;2.74R�2% RoHS : Not Compliant | 0 | |||
| MEHF0204-ZC-3R74GT | VENKEL LTD | High Frequency MELF;0204;2/5W;�50PPM;3.74R�2% RoHS : Not Compliant | 0 | |||
| MEHF0204-TC-2R74GT | VENKEL LTD | High Frequency MELF;0204;1/4W;�50PPM;2.74R�2% RoHS : Not Compliant | 0 | |||
| MEHF0204-TC-1R74GT | VENKEL LTD | High Frequency MELF;0204;1/4W;�50PPM;1.74R�2% RoHS : Not Compliant | 0 |
| Вашему бизинису помогли Аллдатащит? [ DONATE ] |
Что такое Аллдатащит | реклама | контакт | Конфиденциальность | Ссылка на техническое описание | обмен ссыками | поиск по производителю All Rights Reserved짤Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |