| дистрибьютор | номер детали | производитель | подробное описание детали | Price | Qty.
BuyNow |
Microchip Technology Inc | PIC16C622-04/P
 | Microchip Technology Inc | MCU CMOS 18LD 4MHZ 2K EPRM, PDIP, Projected EOL: 2036-01-01
RoHS : Compliant | 5,000 : $5.03
1,000 : $5.28
100 : $5.73
25 : $6.16
1 : $6.59
|
| 2,475
 |
PIC16C622-04I/SO
 | Microchip Technology Inc | MCU CMOS 18LD 4MHZ 2K EPRM, SOIC, Projected EOL: 2036-01-01
RoHS : Compliant | 5,000 : $5.38
1,000 : $5.63
100 : $6.13
25 : $6.57
1 : $7.04
|
| 814
|
MO9062-20
| Microchip Technology Inc | K-Band Detector, Projected EOL: 2046-08-15 - Contact for Pricing | | 0
 |
131-62209-22-2
| Microchip Technology Inc | IC MEM NAND FLASH 2G 8-BIT TSOP-48 IND TEMP, Projected EOL: 2051-01-13 - Contact for Pricing | | 0
|
PIC16C622-04/SO
| Microchip Technology Inc | MCU CMOS 18LD 4MHZ 2K EPRM, SOIC, Projected EOL: 2036-01-01
RoHS : Compliant | 5,000 : $4.88
1,000 : $5.11
100 : $5.57
25 : $5.99
1 : $6.39
|
| 0
|
DSC1101CM2-062.2080
-3.20-mm-x-2.50-mm.jpg) | Microchip Technology Inc | MEMS OSC, LVCMOS, 62.208MHz, 25PPM, 2.5-3.3V, -55 to 125C, 3.2 x 2.5mm, VDFN, Projected EOL: 2041-07-06
RoHS : Compliant | 5,000 : $0.89
1,000 : $0.9
100 : $0.93
25 : $1.02
1 : $1.23
|
| 0
|
DSC1121CM2-062.2080
| Microchip Technology Inc | MEMS OSC, LVCMOS, 62.208MHz, 25PPM, 2.5-3.3V, -55 to 125C, 3.2 x 2.5mm, VDFN, Projected EOL: 2040-11-07
RoHS : Compliant | 5,000 : $0.89
1,000 : $0.9
100 : $0.93
25 : $1.02
1 : $1.23
|
| 0
|
DSC1101CM2-062.2080T
| Microchip Technology Inc | MEMS OSC, LVCMOS, 62.208MHz, 25PPM, 2.5-3.3V, -55 to 125C, 3.2 x 2.5mm, VDFN, Projected EOL: 2046-04-26
RoHS : Compliant | 5,000 : $0.89
1,000 : $0.9
100 : $0.93
25 : $1.02
1 : $1.23
|
| 0
|
DSC1121CM2-062.2080T
| Microchip Technology Inc | MEMS OSC, LVCMOS, 62.208MHz, 25PPM, 2.5-3.3V, -55 to 125C, 3.2 x 2.5mm, VDFN, Projected EOL: 2051-04-12
RoHS : Compliant | 5,000 : $0.89
1,000 : $0.9
100 : $0.93
25 : $1.02
1 : $1.23
|
| 0
|
Ameya Holding Limited | TPS562202DRLR
| Texas Instruments |
RoHS : Compliant | | 16,000
|
TPS62202DBVR
 | Texas Instruments |
RoHS : Compliant | | 8,000
|
BD6220F-E2
 | ROHM Semiconductor | 18V Max. H-bridge Drivers
RoHS : Compliant | 1 : $6.111
10 : $5.1912
50 : $4.6998
100 : $4.095
500 : $3.6036
1,000 : $3.2382
2,500 : $2.9358
5,000 : $2.7468
12,500 : $2.7468
25,000 : $2.7468
|
| 5,250
|
TPS62200DBVT
 | Texas Instruments |
RoHS : Compliant | | 1,750
|
MAX6220ASA-2.5+
| Analog Devices Inc | Low-Noise, Precision, +2.5V/+4.096V/+5V Voltage Reference
RoHS : Compliant | | 1,565
|
5962-9762201VFA
 | Texas Instruments |
RoHS : Not Compliant | | 514
|
ComSIT USA | TPS62202DBVR
| Texas Instruments | AVAILABLE EU
RoHS : Compliant | | 1,614
|
Rutronik | CR16-2201-FY
| ASJ Holdings Limited | RC0603 2,2K 1% 0,1W TK100
RoHS : Compliant | 20,000 : $0.0015
60,000 : $0.0011
100,000 : $0.0011
260,000 : $0.0011
|
| 1,500,000
|
CR16-2202-FY
| ASJ Holdings Limited | RC0603 22K 1% 0,1W TK100
RoHS : Compliant | 20,000 : $0.0015
60,000 : $0.0011
100,000 : $0.0011
260,000 : $0.0011
|
| 700,000
|
CR16-220-JY
| ASJ Holdings Limited | RC0603 22R 5% 0,1W TK100
RoHS : Compliant | 20,000 : $0.0013
60,000 : $0.001
100,000 : $0.001
260,000 : $0.001
|
| 440,000
|
TNPW1206220KBEEA
| Vishay Intertechnologies | TF1206 220K 0,1% 0,52W TK25
RoHS : Compliant | 5,000 : $0.1697
10,000 : $0.1604
15,000 : $0.1589
|
| 100,000
|
CR16-2202-FL
| ASJ Holdings Limited | RC0603 22K 1% 0,1W TK100
RoHS : Compliant | 5,000 : $0.0015
20,000 : $0.0011
25,000 : $0.0011
150,000 : $0.0011
|
| 25,000
|
CR16-220-JL
| ASJ Holdings Limited | RC0603 22R 5% 0,1W TK100
RoHS : Compliant | 5,000 : $0.0013
20,000 : $0.001
25,000 : $0.001
150,000 : $0.001
|
| 15,100
|
AT62-20-0122
| Amphenol Interconnect Products Inc | AT Socket Contact #20 20-22 AWG Nickel
RoHS : Compliant | | 4,000
|
6220.2300
| Schurter Electronic Components | 6220 G-Connector-Kombi 10A
RoHS : Compliant | 50 : $3.73
100 : $3.5
200 : $3.46
300 : $3.46
400 : $3.43
|
| 250
|
Braemac Americas-Symmetry | AX5DAF1-622.0800T
 | Abracon Corporation |
RoHS : Compliant | | 0
|
ACHL-62.208MHZ-LR-A-Q25
| Abracon Corporation |
RoHS : Compliant | | 0
|
AIML-1206-220K-T
 | Abracon Corporation |
RoHS : Compliant | | 0
|
AX7DAF1-622.0000T
 | Abracon Corporation | XTAL OSC XO 622.0000MHZ LVDS SMD
RoHS : Compliant | | 0
|
32-0162-20
| Calian | | | 0
|
AX7DAF1-622.0800T
| Abracon Corporation | XTAL OSC XO 622.0800MHZ LVDS SMD
RoHS : Compliant | | 0
|
AIRD-06-220K
 | Abracon Corporation |
RoHS : Compliant | | 0
|
ASG-D-X-A-622.08MHZ-T
 | Abracon Corporation | XTAL OSC XO 622.0800MHZ LVDS SMD
RoHS : Compliant | | 0
|
ASG-D-V-A-622.08MHZ-T
| Abracon Corporation | XTAL OSC VCXO 622.0800MHZ LVDS
RoHS : Compliant | | 0
|
ASG-P-X-A-622.08MHZ-T
| Abracon Corporation | XTAL OSC XO 622.0800MHZ LVPECL
RoHS : Compliant | | 0
|
AIUR-06-220K
 | Abracon Corporation |
RoHS : Compliant | | 0
|
Chip-Germany GmbH | M39006/22-0505
| Vishay Intertechnologies |
RoHS : Not Compliant | | 5
|
DB Roberts | NY-N6-2-20
| Southco | | 1 : $0.8805
100 : $0.8805
283 : $0.8805
|
| 283
|
064362201137E
| Essentra Components | | | 0
|
064362201200
| Essentra Components | LATCH, CAM QTR TURN WING KNOB, | | 0
|
27SR106220W
| Essentra Components | SNAP RIVET, .102-.106 HOLE, .1 | | 0
|
0622093E
| Essentra Components | | | 0
|
D8-316-220-131
| Southco | D8-316-220-131 | | 0
|
85-16-220-16
| Southco | The simplicity of a quarter turn is all it takes to secure panels quickly and easily with these versatile little fasteners. Numerous head styles stud lengths receptacle styles and accessories provide flexibility for accommodating many specific mountin | | 0
|
0622000
| Essentra Components | LATCH, CAM QTR TURN WING KNOB | | 0
|
62-20-13
| Southco | | | 0
|
47-62-201-22
| Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | | 0
|
47-62-201-64
| Southco | Southco 47 Class captive screws offer hundreds of permutations of installation and tool-actuation styles for mounting doors panels and other hardware components in limited-space applications. | | 0
|
D8-316-220-170
| Southco | Precision fit aesthetics strength and numerous stud sizes styles and receptacles make this quarter-turn quick-access fastener line a leading choice for a wide variety of applications. Precision rolling creates a perfect fit even at low to moderate o | | 0
|
SC106220
| Essentra Components | ROUND END CAPSILICONE GREY | | 0
|
SC106220B
| Essentra Components | ROUND END CAPEPDM BLACK | | 0
|
3622000
| Essentra Components | LATCH, CAM QTR TURN WING KNOB | | 0
|
ECCO | 143-3622-000-MS
| ITT Interconnect Solutions | | | 558
|
011-0622-000
| ITT Interconnect Solutions | | | 420
|
0110622000
| ITT Interconnect Solutions | | | 420
|
FDH Electronics | 78004-0622-0030
| Silver State Wire & Cable | Wire and Cable | | 6,000
|
M85049/26-2-20
| Amphenol PCD | Connector Acc | 1 : $11.728
5 : $11.728
10 : $10.348
25 : $9.773
50 : $9.773
100 : $9.424
250 : $9.099
500 : $9.099
1,000 : $8.796
2,500 : $8.796
10,000 : $8.512
|
| 103
|
1205-126-2204
| Aero-Electric Connector Inc | Shell | | 0
|
M39016/22-004L
| TE Connectivity | Relays
RoHS : Not Compliant | | 0
|
50075622-001
| Honeywell Sensing and Control | Switches | | 0
|
M39016/22-009M
| TE Connectivity | Relays
RoHS : Not Compliant | | 0
|
M39016/22-009L
| TE Connectivity | Relays | | 0
|
M85049/26-2-20
| Glenair Inc | Backshells & Ac | | 0
|
M83536/22-017L
| DRI Relays Inc | Relays | | 0
|
M83536/22-025M
| DRI Relays Inc | Relays & Cont | | 0
|
1205-476-2209
| Aero-Electric Connector Inc | Shell | | 0
|
M39016/22-016L
| TE Connectivity | Relays & Cont
RoHS : Not Compliant | | 0
|
2562-202-2090
| TE Connectivity | Connector Acc
RoHS : Not Compliant | | 0
|
6762-203-22233
| TE Connectivity | Elec. Contact
RoHS : Compliant | | 0
|
M83536/22-023L
| DRI Relays Inc | Relays | | 0
|
Maritex | RCA06220RFLF
| Hong Kong Resistors Manufactory | Surface Mount Resistors; RCA06220RFLF; HKR | 60,000 : $0.003
10,000 : $0.003
3,000 : $0.004
1,000 : $0.004
100 : $0.006
1 : $0.018
|
| 299,600
|
RCA06220KFLF
| Hong Kong Resistors Manufactory | Surface Mount Resistors; RCA06220KFLF; HKR | 60,000 : $0.003
10,000 : $0.003
3,000 : $0.004
1,000 : $0.004
100 : $0.006
1 : $0.018
|
| 170,000
|
RCA06220KJLF
| Hong Kong Resistors Manufactory | Surface Mount Resistors; RCA06220KJLF; HKR | 60,000 : $0.002
10,000 : $0.002
3,000 : $0.003
1,000 : $0.003
100 : $0.004
1 : $0.013
|
| 144,700
|
RCA06220RJLF
| Hong Kong Resistors Manufactory | Surface Mount Resistors; RCA06220RJLF; HKR | 60,000 : $0.002
10,000 : $0.002
3,000 : $0.003
1,000 : $0.003
100 : $0.004
1 : $0.013
|
| 135,000
|
0462-201-16141
| TE Connectivity | Multi-Purpose Contacts; 0462-201-16141; TE CONNECTIVITY; Nickel; Crimp; Nickel; Socket
RoHS : Compliant | 1,000 : $0.403
500 : $0.438
100 : $0.534
30 : $0.638
10 : $0.75
1 : $0.9931
|
| 26,218
|
TPS562208DDCR
 | Texas Instruments | DC DC Converters; TPS562208DDCR; TEXAS INSTRUMENTS; 6; Buck; 1; 1.6 mm
RoHS : Compliant | 6,000 : $0.051
3,000 : $0.056
500 : $0.066
150 : $0.079
50 : $0.094
5 : $0.129
1 : $0.403
|
| 15,735
|
0462-201-20141
| TE Connectivity | Multi-Purpose Contacts; 0462-201-20141; TE CONNECTIVITY; Nickel; Crimp; Copper; Socket
RoHS : Compliant | 1,000 : $0.481
500 : $0.517
100 : $0.57
10 : $0.679
1 : $0.8132
|
| 13,660
|
TPS562200DDCR
 | Texas Instruments | DC DC Converters; TPS562200DDCR; TEXAS INSTRUMENTS; 6; Buck; 1.1 mm; 1
RoHS : Compliant | 1,000 : $0.431
500 : $0.466
100 : $0.565
30 : $0.679
10 : $0.803
1 : $1.067
|
| 7,532
|
CRCW1206220RFKTABC
| Vishay Intertechnologies | Chip Resistor; SMD; 1206; 220K; 1%; 1/4W
RoHS : Compliant | 50,000 : $0.003
10,000 : $0.003
5,000 : $0.003
4,000 : $0.003
2,000 : $0.003
1,000 : $0.004
500 : $0.004
300 : $0.004
100 : $0.005
1 : $0.007
|
| 7,258
|
TPS562207DRLR
 | Texas Instruments | DC DC Converters; TPS562207DRLR; TEXAS INSTRUMENTS; 6; Buck; 1; 1.2 mm
RoHS : Compliant | 8,000 : $0.044
4,000 : $0.047
100 : $0.055
30 : $0.06
10 : $0.081
1 : $0.107
|
| 5,293
|
0462-203-08141
| TE Connectivity | Multi-Purpose Contacts; 0462-203-08141; TE CONNECTIVITY; Nickel; Crimp; Nickel; Cable
RoHS : Compliant | 500 : $3.679
100 : $4.228
50 : $4.682
10 : $5.883
1 : $7.6584
|
| 1,344
|
RNP18-PK0406-220K
| RDA Microelectronics | Inductor: wire; THT; 22uH; Ipracy: 1A; 180mOhm; 10%; 5.5x7.5mm | 1,000 : $0.062
500 : $0.073
100 : $0.083
10 : $0.093
1 : $0.104
|
| 1,000
|
1-1658622-0
| TE Connectivity | Panel Mount Connectors; 1-1658622-0; TE CONNECTIVITY; 50; 2; Black; Tin
RoHS : Compliant | 500 : $2.333
100 : $2.675
10 : $3.413
1 : $4.4461
|
| 908
|
0462-203-04141
| TE Connectivity | Multi-Purpose Contacts; 0462-203-04141; TE CONNECTIVITY; Nickel; Crimp; Nickel; Cable
RoHS : Compliant | 100 : $6.019
50 : $6.726
10 : $8.601
1 : $11.6282
|
| 135
|
TPS562209DDCR
 | Texas Instruments | DC DC Converters; TPS562209DDCR; TEXAS INSTRUMENTS; 6; Buck; 1; 1.6 mm
RoHS : Compliant | 500 : $0.076
100 : $0.098
10 : $0.117
1 : $0.156
|
| 10
|
Master Electronics | 1.30.272.026/2208
| RAFI GmbH & Co Kg | RAFIX 22 FS+ - Selector switch illuminated round collar
RoHS : Compliant | 1,000 : $25.08
500 : $25.14
250 : $25.21
100 : $25.41
50 : $26.0
30 : $26.85
10 : $29.95
|
| 35
|
LELHK11-1-62-20.0-01-V
| Sensata Circuit Breakers | Circuit Breaker Magnetic 2Pole 20A
RoHS : Compliant | 102 : $120.5
51 : $131.92
21 : $153.73
12 : $186.51
6 : $209.68
3 : $224.77
|
| 10
|
160091-6220
| Molex | 1.2MM WIRE DRESS COVER RCPT 1X6
RoHS : Compliant | 1,600 : $0.325
750 : $0.37
500 : $0.407
|
| 0
|
10123246-22000LF
| Amphenol FCi | HPCE CTB RAH 6LP LATCH-10123246-22000LF
RoHS : Compliant | 1,800 : $5.62
1,350 : $5.73
900 : $8.33
450 : $15.79
250 : $15.83
100 : $15.87
20 : $15.91
|
| 0
|
3662-204-2090
| TE Connectivity | Contact SKT Crimp ST Cable Mount
RoHS : Compliant | 40,000 : $0.3223
30,000 : $0.3284
20,000 : $0.3356
10,000 : $0.3427
1,000 : $0.3488
150 : $0.356
|
| 0
|
R15-62-20.0A-R01CV-V
| Sensata Circuit Breakers | Cir Brkr HydMag
RoHS : Compliant | 252 : $21.05
102 : $22.27
51 : $23.6
27 : $25.34
12 : $29.5
6 : $29.57
3 : $33.77
|
| 0
|
SBCHE6220RJ
| TE Connectivity | Res Wirewound 220 Ohm 5% 7W ±200ppm/°C Ceramic AXL
RoHS : Compliant | 15,000 : $0.561
10,000 : $0.568
7,500 : $0.589
5,000 : $0.604
2,500 : $0.606
1,000 : $0.66
300 : $0.691
100 : $0.85
|
| 0
|
PR11-62-20.0A-XX-V
| Sensata Circuit Breakers | SNAPAK® series is a snap-acting hydraulic magnetic circuit protector Push to reset.
RoHS : Compliant | 252 : $14.44
102 : $15.38
51 : $16.46
27 : $17.45
12 : $20.34
6 : $21.32
3 : $24.83
|
| 0
|
PR21-62-2.00A-70323-3-V
| Sensata Circuit Breakers | Cir Brkr Hyd Mag
RoHS : Compliant | 252 : $29.53
102 : $31.75
51 : $32.24
27 : $35.19
12 : $41.01
6 : $42.31
3 : $48.4
|
| 0
|
IELH111-1-62-20.0-ABE-01-V
| Sensata Circuit Breakers | Circuit Breaker Hydraulic Magnetic 3 Pole IEL Series | Sensata - Airpax IELH111-1-62-20.0-ABE-01-V
RoHS : Compliant | 21 : $183.49
12 : $188.52
6 : $200.39
3 : $268.26
1 : $275.93
|
| 0
|
LEGF66-1-62-20.0-01-V
| Sensata Circuit Breakers | Cir Brkr Hyd Mag Screw 2 Pole 50/60Hz Long Delay 20A LEG Series | Sensata - Airpax LEGF66-1-62-20.0-01-V
RoHS : Compliant | 102 : $51.87
51 : $59.34
21 : $94.34
12 : $98.39
6 : $107.84
3 : $144.3
|
| 0
|
LEJ6-1-62-20.0-F-01-V
| Sensata Circuit Breakers | Cir Brkr Hyd Mag
RoHS : Compliant | 102 : $29.14
51 : $32.48
21 : $53.89
12 : $56.3
6 : $59.82
3 : $80.15
|
| 0
|
LEJBX66-1-62-20.0-AZ-M3-T
| Sensata Circuit Breakers | Cir Brkr Hyd Mag
RoHS : Compliant | 102 : $68.39
51 : $77.23
21 : $125.77
12 : $126.08
6 : $133.99
3 : $181.82
|
| 0
|
LEJBX66-1-62-20.0-FZ-N3-T
| Sensata Circuit Breakers | Cir Brkr Hyd Mag
RoHS : Compliant | 102 : $68.39
51 : $77.23
21 : $125.77
12 : $126.08
6 : $133.99
3 : $181.82
|
| 0
|
LELH11-1-62-20.0-91-V
| Sensata Circuit Breakers | Circuit Breaker Hydraulic Magnetic 2 Pole LEL Series | Sensata - Airpax LELH11-1-62-20.0-91-V
RoHS : Compliant | 102 : $69.42
51 : $78.37
21 : $127.68
12 : $128.0
6 : $136.11
3 : $184.7
|
| 0
|
Pasternack Enterprises US | PE3C6220
| Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm. Plenum 4.3-10 Male to N Female Low PIM Cable Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 male to N female low PIM cable using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male to N female low PIM cable using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-SPP250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-SPP250-4310M-LP 4.3-10 cable connection on one end and TC-SPP250-NF-LP type N cable connection on the other. Our low PIM TC-SPP250-4310M-LP 4.3-10 to TC-SPP250-NF-LP N type cable assemblies have a male gender on end 1 and female on end 2. This TC-SPP250-4310M-LP 4.3-10 to TC-SPP250-NF-LP N type cable is a male to female coax assembly, PE3C6220, can also be known as a low PIM TC-SPP250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly and will be shipped same-day as it is purchased. TC-SPP250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly PE3C6220 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-SPP250-4310M-LP 4.3-10 cable assembly is manufactured with TC-SPP250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-SPP250-4310M-LP 4.3-10 male to TC-SPP250-NF-LP N type female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6220 can also be used in the other direction and will be TC-SPP250-NF-LP type N female to TC-SPP250-4310M-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-SPP250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-SPP250-4310M-LP 4.3-10 to TC-SPP250-NF-LP N type cable assembly for quick shipment worldwide. Variations of TC-SPP250-4310M-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male to N female low PIM cable using SPP-250-LLPL coax using Times Microwave parts. | | 756
|
PE3C6362-200CM
| Pasternack Enterprises | Key Specifications, Connector Series 1: N, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: NEX10, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPF-250, RF Cable Type: SPF-250, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. Fire Rated N Male to NEX10 Male Low PIM Cable 200 cm Length Using SPF-250 Coax Using Times Microwave Parts., Radio frequency assembly fire rated N male to NEX10 male low PIM cable 200 cm length using SPF-250 coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Fire rated N male to NEX10 male low PIM cable 200 cm length using SPF-250 coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-NM-LP type N to TC-250-NX10M-LP NEX10 cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-250-NM-LP type N cable connection on one end and TC-250-NX10M-LP NEX10 cable connection on the other. Our low PIM TC-250-NM-LP N type to TC-250-NX10M-LP NEX10 cable assemblies have a male gender on end 1 and male on end 2. This TC-250-NM-LP type N to TC-250-NX10M-LP NEX10 cable is a male to male coax assembly, PE3C6362-200CM, can also be known as a low PIM TC-250-NM-LP type N plug to TC-250-NX10M-LP NEX10 plug cable assembly and will be shipped same-day as it is purchased. TC-250-NM-LP N type plug to TC-250-NX10M-LP NEX10 plug cable assembly PE3C6362-200CM is built with SPF-250 which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-NM-LP N cable assembly is manufactured with TC-250-NM-LP N type to TC-250-NX10M-LP NEX10 cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-NM-LP type N male to TC-250-NX10M-LP NEX10 male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6362-200CM can also be used in the other direction and will be TC-250-NX10M-LP NEX10 male to TC-250-NM-LP type N male cable assembly if the opposite connectivity is required. Low PIM TC-250-NM-LP N type plug to TC-250-NX10M-LP NEX10 plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-NM-LP type N to TC-250-NX10M-LP NEX10 cable assembly for quick shipment worldwide. Variations of TC-250-NM-LP type N cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this fire rated N male to NEX10 male low PIM cable 200 cm length using SPF-250 coax using Times Microwave parts. | 1 : $145.99
25 : $138.69
50 : $131.39
100 : $125.55
|
| 129
|
PE3W05762-200CM
| Pasternack Enterprises | Key Specifications, Connector Series 1: TNC, Connector Gender 1: Female, Connector Polarity 1: Reverse Polarity, Connector Angle 1: Straight, Connector Mount Method 1: Bulkhead, Connector Impedance 1: 50 Ohm, Connector Series 2: SSMC, Connector Gender 2: Plug, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: RG188A/U, RF Cable Type: RG188, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. Reverse Polarity TNC Female Bulkhead to SSMC Plug Right Angle Cable 200 cm Length Using RG188 Coax., Radio frequency assembly reverse polarity TNC female bulkhead to SSMC plug right angle cable 200 cm length using RG188 coax from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Reverse polarity TNC female bulkhead to SSMC plug right angle cable 200 cm length using RG188 coax, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TNC to SSMC cable assembly orders will ship same day as well. Pasternack RF coax cable assembly is built with reverse polarity TNC bulkhead cable connection on one end and right angle SSMC cable connection on the other. Our reverse polarity TNC to right angle SSMC cable assemblies have a female gender on end 1 and plug on end 2. This reverse polarity TNC to SSMC cable is a female to plug coax assembly, PE3W05762-200CM, can also be known as a reverse polarity TNC jack to right angle SSMC male cable assembly and will be shipped same-day as it is purchased. Reverse polarity TNC jack to SSMC male cable assembly PE3W05762-200CM is built with RG188 which is a flexible coax type. The Pasternack flexible reverse polarity TNC cable assembly is manufactured with TNC to right angle SSMC cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 400 MHz maximum frequency reverse polarity TNC female bulkhead to SSMC right angle plug cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05762-200CM can also be used in the other direction and will be right angle SSMC plug to reverse polarity TNC female bulkhead cable assembly if the opposite connectivity is required. TNC reverse polarity jack bulkhead to SSMC right angle male cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TNC to SSMC cable assembly for quick shipment worldwide. Variations of TNC cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this reverse polarity TNC female bulkhead to SSMC plug right angle cable 200 cm length using RG188 coax. | 1 : $139.99
25 : $132.99
50 : $125.99
100 : $120.39
|
| 89
|
PE3C6220-24
| Pasternack Enterprises | Key Specifications, Connector Series 1: 4.3-10, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: SPP-250-LLPL, RF Cable Type: SPP-250-LLPL, RF Cable Impedance: 50 Ohm, Length: 24 inches. Plenum 4.3-10 Male to N Female Low PIM Cable 24 Inch Length Using SPP-250-LLPL Coax Using Times Microwave Parts., Radio frequency assembly plenum 4.3-10 male to N female low PIM cable 24 inch length using SPP-250-LLPL coax using Times Microwave parts from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack low PIM (Passive Intermodulation, also called Intermod for short) coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, general use, etc. Plenum 4.3-10 male to N female low PIM cable 24 inch length using SPP-250-LLPL coax using Times Microwave parts, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable assembly orders will ship same day as well. Pasternack RF coax low PIM cable assembly is built with TC-250-4310M-LP 4.3-10 cable connection on one end and TC-SPP250-NF-LP type N cable connection on the other. Our low PIM TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP N type cable assemblies have a male gender on end 1 and female on end 2. This TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable is a male to female coax assembly, PE3C6220-24, can also be known as a low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP N type jack cable assembly and will be shipped same-day as it is purchased. TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly PE3C6220-24 is built with SPP-250-LLPL which is a corrugated coax type. The Pasternack low passive intermodulation corrugated TC-250-4310M-LP 4.3-10 cable assembly is manufactured with TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP N type cable connectors, has a 50 Ohm impedance and is single shielded. RF specs on this 5.8 GHz maximum frequency low PIM TC-250-4310M-LP 4.3-10 male to TC-SPP250-NF-LP type N female cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C6220-24 can also be used in the other direction and will be TC-SPP250-NF-LP type N female to TC-250-4310M-LP 4.3-10 male cable assembly if the opposite connectivity is required. Low PIM TC-250-4310M-LP 4.3-10 plug to TC-SPP250-NF-LP type N jack cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality TC-250-4310M-LP 4.3-10 to TC-SPP250-NF-LP type N cable assembly for quick shipment worldwide. Variations of TC-250-4310M-LP 4.3-10 cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this plenum 4.3-10 male to N female low PIM cable 24 inch length using SPP-250-LLPL coax using Times Microwave parts. | 1 : $130.99
25 : $124.44
50 : $117.89
100 : $112.65
|
| 84
|
PEWAN062-20SM
| Pasternack Enterprises | Key Specifications, Waveguide Size: WR-62, Gain Min: 20, Beam Width, 3dB V: 17.3, Beam Width, 3dB H: 17.5, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Standard Gain Horn with 20 dBi gain, SMA Male connector. The PEWAN062-20SM standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-62 input and a waveguide to coaxial transition adapter. Our WR-62 waveguide antenna features an SMA male connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-62 standard gain horn antenna with an SMA male input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack’s PEWAN062-20SM waveguide horn antenna has a typical gain of 20 dBi. Our waveguide antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. This antenna has a length of 7.5 inches, a width of 3.04 inches, and a weight of 0.4 lbs. This WR-62 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with an SMA male interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. | 1 : $1,420.0
5 : $1,363.2
10 : $1,306.4
25 : $1,249.6
|
| 24
|
PE6220
| Pasternack Enterprises | Key Specifications, Termination Type: RF Load, Connector Series: SMA, Connector Gender: Female, Minimum Frequency: DC, Maximum Frequency: 8 GHz, Impedance: 50 Ohm, Maximum VSWR: 1.5:1, Maximum Power: 100 Watt. High Power 100 Watt RF Load Up To 8 GHz With SMA Female Input Conduction Cooled Body Black Anodized Aluminum Heatsink. PE6220 100 Watts RF load (also known as termination or dummy load) has a SMA connector that is female. This Pasternack 100 watts SMA female load / termination is rated for a maximum frequency of 8 GHz. Our SMA female termination load is a rf load termination with a 50 Ohm impedance. This SMA load / coax terminator is manufactured with no chain and passivated stainless steel body. Pasternack 50 Ohm SMA coaxial termination / load has an average maximum VSWR of 1.5:1. PE6220 100 watts SMA female load termination is one of over 40,000 RF, microwave and millimeter wave components in-stock at Pasternack. Our SMA female 100 watts termination load will ship worldwide the same day as purchased. | 1 : $1,150.0
5 : $1,104.0
10 : $1,058.0
|
| 4
|
PE3WAN062-20NF
| Pasternack Enterprises | Key Specifications, Waveguide Size: WR-62, Gain Min: 20, Beam Width, 3dB V: 17.3, Beam Width, 3dB H: 17.5, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Standard Gain Horn with 20 dBi Gain, N Female Connector with Weather Resistant Radome Cover. The PE3WAN062-20NF standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a weather-resistant radome cover and a waveguide to coaxial transition adapter. Our WR-62 waveguide antenna features a type N female connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-62 standard gain horn antenna with a type N female input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack’s PE3WAN062-20NF waveguide horn antenna with a weather-resistant radome cover has a typical gain of 20 dBi. Our waveguide antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. This antenna has a length of 7.81 inches, a width of 3.04 inches, and a weight of 0.45 lbs. This WR-62 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a type N female interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. | 1 : $2,169.5
5 : $2,126.11
10 : $2,082.72
25 : $2,039.33
|
| 2
|
PE3C8062-200CM
| Pasternack Enterprises | Key Specifications, Connector Series 1: 2.2-5, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-1/4SFHC, RF Cable Type: 1/4" Superflexible, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. | 1 : $141.99
25 : $134.89
50 : $127.79
100 : $122.11
|
| 0
|
PE71S6220
| Pasternack Enterprises | Key Specifications, Connector Series: SMA, Connector Gender: Female, Switch Design: Reflective, Minimum Frequency: 500 MHz, Maximum Frequency: 18 GHz, Impedance: 50 Ohm, Maximum Input Power: 0.1 Watts, Maximum Input VSWR: 2:1, Minimum Isolation: 55 dB. SPST PIN Diode Switch Operating From 500 MHz to 18 GHz Up to 0.1 Watts (+20 dBm) and Field Replaceable SMA. PE71S6220 PIN diode switch from Pasternack is a Reflective design. Our RF Reflective PIN diode switch uses SMA connectors at 50 Ohm. This SMA PIN diode Reflective switch has a minimum frequency of 500 MHz and a maximum frequency of 18 GHz. The Pasternack PIN diode Reflective RF switch is rated at a switching speed of 100 ns and a maximum input power of 0.1 Watts (+20 dBm ). Insertion loss maximum of this SMA Reflective switch is dB with an isolation minimum of 55 dB. Reflective PIN diode radio frequency switch PE71S6220 is part of over 40,000 RF, microwave and millimeter wave components available from Pasternack. Our Reflective SMA coaxial PIN diode switch can ship worldwide the same day that it is bought as with our other available RF parts. | 1 : $2,420.0
5 : $2,323.2
10 : $2,226.4
|
| 0
|
PE1WAN062-20NM
| Pasternack Enterprises | Key Specifications, Waveguide Size: WR-62, Gain Min: 20, Beam Width, 3dB V: 17.3, Beam Width, 3dB H: 17.5, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz. WR-62 Standard Gain Horn with 20 dBi gain, N Male connector, Integrated Cage-Style Mount. The PE1WAN062-20NM standard gain horn antenna (also known as a waveguide horn antenna) is part of our huge selection of waveguide antennas. Pasternack’s standard gain horn antenna is manufactured with a WR-62 input and a waveguide to coaxial transition adapter. Our WR-62 waveguide antenna features a type N male connector. This antenna is suitable for applications such as antenna measurements, wireless communication, laboratory use, microwave radio systems, radome testing, automotive antenna test solutions, radar cross section and satellite antenna testing. Our WR-62 standard gain horn antenna with a type N male input has a minimum frequency of 12.4 GHz and a maximum frequency of 18 GHz. Pasternack’s PE1WAN062-20NM waveguide horn antenna has a typical gain of 20 dBi. Our waveguide antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. This antenna has a length of 12.53 inches, a width of 7.76 inches, and a weight of 1.13 lbs. This WR-62 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Additional dimensions and specifications for this antenna are available on our downloadable PDF datasheet. Our standard gain horn antenna with a type N male interface can ship worldwide the same business day that it is purchased, as with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. | 1 : $2,390.0
5 : $2,294.4
10 : $2,198.8
25 : $2,103.2
|
| 0
|
PE3C2162-200CM
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Female, Connector Polarity 2: Standard, Connector Angle 2: Straight, Connector Mount Method 2: Bulkhead, Connector Impedance 2: 50 Ohm, RF Cable Part Number: PE-P142LL, RF Cable Type: PE-P142LL, RF Cable Impedance: 50 Ohm, Length: 78.74 inches. SMA Male to N Female Bulkhead Low Loss Cable 200 cm Length Using PE-P142LL Coax, RoHS., Radio frequency assembly SMA male to N female bulkhead low loss cable 200 cm length using PE-P142LL coax, RoHS from Pasternack is part of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. SMA male to N female bulkhead low loss cable 200 cm length using PE-P142LL coax, RoHS, like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to N type cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and type N bulkhead cable connection on the other. Our low loss SMA to type N cable assemblies have a male gender on end 1 and female on end 2. This SMA to N type cable is a male to female coax assembly, PE3C2162-200CM, can also be known as a low loss SMA plug to type N jack cable assembly and will be shipped same-day as it is purchased. SMA plug to type N jack cable assembly PE3C2162-200CM is built with PE-P142LL which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to type N cable connectors, has a 50 Ohm impedance and is triple shielded. RF specs on this 18 GHz maximum frequency SMA male to type N female bulkhead cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3C2162-200CM can also be used in the other direction and will be N type female bulkhead to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to N type jack bulkhead cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to type N cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to N female bulkhead low loss cable 200 cm length using PE-P142LL coax, RoHS. | 1 : $363.99
25 : $345.79
50 : $327.59
|
| 0
|
PE3W06220
| Pasternack Enterprises | Key Specifications, Connector Series 1: SMA, Connector Gender 1: Male, Connector Polarity 1: Standard, Connector Angle 1: Straight, Connector Mount Method 1: None, Connector Impedance 1: 50 Ohm, Connector Series 2: N, Connector Gender 2: Male, Connector Polarity 2: Standard, Connector Angle 2: Right Angle, Connector Mount Method 2: None, Connector Impedance 2: 50 Ohm, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm. SMA Male to N Male Right Angle Cable Using LMR-100 Coax. PE3W06220 is a SMA male to N male right angle cable using LMR-100A coax. This Pasternack SMA male to N male right angle cable assembly uses a 50 Ohm SMA for connector 1 and a 50 Ohm N for connector 2. SMA to N right angle coaxial cable assembly uses 90 degree right angle coax cable connector. Our male SMA to male N right angle cable assembly uses a flexible cable type that is 50 Ohm. Pasternack PE3W06220 SMA male to N male right angle cable assembly is constructed with LMR-100A coax, * LMR™ is a trademark of Times Microwave Systems. | | 0
|
PE7462-20
| Pasternack Enterprises | Key Specifications, Attenuator Design: Fixed, Active/Passive: Passive, Connection Type: In-Series, Connector-In Impedance: 50 Ohms, Connector-Out Impedance: 50 Ohms, Max Freq: 12.4 GHz, Nominal Attenuation: 20 dB, Attenuation Accuracy, Typ: 0.7 dB, VSWR, Max: 1.35:1, Input Power, Max (CW): 5 Watts, Body Material: Brass, Connector-In Series: TNC, Connector-In Gender: Male, Connector-Out Series: TNC, Connector-Out Gender: Female, Max Operating Temperature: 125 deg C, Min Operating Temperature: -55 deg C. 20 dB Fixed Attenuator, TNC Male to TNC Female Brass Nickel Body Rated to 5 Watts Up to 12.4 GHz. PE7462-20 is a fixed 20 dB attenuator from Pasternack. This 20 dB attenuator is an in-line, resistive PI attenuator pad design. Our coaxial 50 Ohm attenuator is manufactured to precise RF / microwave industry specifications. This RF attenuator can control the signal level to an ideal range, preventing signal overload in amplifiers, receivers, and detectors. Pasternack's PE7462-20 in-series fixed attenuator is available with a typical attenuation accuracy of 0.7 dB. The max input power rating (CW) of this RF attenuator is 5 Watts. This attenuator has a maximum VSWR of 1.35:1 and operates between -55 and +125 deg C. Our fixed radio frequency attenuator with TNC connectors is constructed with brass body material and nickel plating. This TNC attenuator has a male gender on side 1 and a TNC female connector on side 2. The Pasternack PE7462-20 20 dB attenuator is rated for up to 12.4 GHz. Our microwave attenuator is rated to 5 Watts at the stated attenuation value. This coaxial attenuator is suitable for instrumentation, precision measurements, prototyping and characterization, production systems, wifi 6E, 5G cellular bands applications. Our fixed RF attenuator PE7462-20 is shipped same-day as purchased from Pasternack's production facility certified to ISO 9001:2015. This 20 dB attenuator is part of over 40,000 RF, microwave and millimeter wave products that ship the same day worldwide, including custom cable assemblies. For further information on similar products, our expert technical support and trained sales team can get you to the ideal RF coaxial fixed attenuator as per your requirement. | 1 : $177.99
10 : $170.87
25 : $163.75
100 : $156.63
|
| 0
|
PE3W05262-200CM
| Pasternack Enterprises | Key Specifications, Connector 1 Series: SMA, Connector 1 Gender: Male, Connector 1 Polarity: Standard, Connector Angle 1: Straight, Connector 1 Impedance: 50 Ohm, Connector 2 Series: TNC, Connector 2 Gender: Male, Connector 2 Polarity: Standard, Connector Angle 2: Right Angle, Connector 2 Impedance: 50 Ohm, Connector 1 Body Material: Brass, Connector 1 Body Plating: Nickel, RF Cable Part Number: LMR-100A-PVC, RF Cable Type: LMR-100A, RF Cable Impedance: 50 Ohm, Length, Max: 78.7402 inches. SMA Male to TNC Male Right Angle Low Loss Cable 200 CM Length Using LMR-100 Coax., Radio frequency assembly SMA male to TNC male right angle low loss cable 200 cm length using LMR-100 coax from Pasternack is part of one of the largest selections of same-day ship coaxial cables for RF, microwave and millimeter wave interconnect solutions. Pasternack coaxial cable assembly products are used in applications requiring high quality such as laboratory RF test and measurement, rugged and designed for defense / military, telecom antenna tower component jumper connection, production environments, low loss, general use, etc. The SMA male to TNC male right angle low loss cable 200 cm length using LMR-100 coax, SMA cable like our other Pasternack coaxial cable assemblies, will ship the same day and any custom SMA to TNC cable assembly orders will ship same day as well. Pasternack RF coax low loss cable assembly is built with SMA cable connection on one end and right angle TNC cable connection on the other. Our low loss SMA to right angle TNC cable assemblies have a male gender on end 1 and male on end 2. PE3W05262-200CM can also be known as a low loss SMA plug to right angle TNC plug cable assembly and will be shipped same-day as it is purchased. SMA plug to TNC plug cable assembly PE3W05262-200CM is built with LMR-100A which is a flexible coax type. The Pasternack flexible SMA cable assembly is manufactured with SMA to right angle TNC cable connectors, has a 50 Ohm impedance and is double shielded. RF specs on this 5.8 GHz maximum frequency SMA male to TNC right angle male cable are located on the specifications PDF datasheet on this page along with CAD drawing and dimensions. PE3W05262-200CM can also be used in the other direction and will be right angle TNC male to SMA male cable assembly if the opposite connectivity is required. Low loss SMA plug to TNC right angle plug cable assembly is just one of more than 45,000 in-stock RF products available. Pasternack is where to buy a high quality SMA to TNC cable assembly for quick shipment worldwide. Variations of SMA cable assemblies can also be built and will ship same-day as well, search this website or contact us for assistance. High quality custom RF cable assembly products for microwave and millimeter wave radio transmitter receiver, antenna jumper, component inter-connection and more for RF test & measurement labs, rugged and MIL-STD designed military / defense, aerospace, telecom, low loss, phase stable, phase and delay matching, outdoor and harsh environment and other radio frequency applications can be manufactured. For all these reasons and more, Pasternack is one of the best websites where to find and buy quality RF cable assemblies like this SMA male to TNC male right angle low loss cable 200 cm length using LMR-100 coax. | 1 : $97.39
25 : $92.52
50 : $87.65
100 : $83.76
|
| 0
|
PE1WAN062-20
| Pasternack Enterprises | Key Specifications, Waveguide Size: WR-62, Frequency, Min: 12.4 GHz, Frequency, Max: 18 GHz, Beam Width V: 17.3, Beam Width H: 17.5. WR-62 Waveguide Antenna, 12.4 GHz to 18 GHz Frequency Range, 20 dBi Gain,, Integrated Cage-Style Mount. Pasternack’s PE1WAN062-20 WR-62 waveguide horn is also known as a waveguide horn antenna. This WR-62 waveguide antenna has a nominal gain of 20 dBi. Our waveguide horn can operate at frequencies ranging from 12.4 to 18 GHz. The antenna with linear polarization has a typical VSWR of 1.3:1 and is suitable for test and measurement industries. This 20 dBi waveguide horn from Pasternack has an overall length of 4.72 inches, a width of 4.72 inches, and a weight of 0.98 lbs. Our WR-62 waveguide horn antenna has a typical vertical beam width of 17.3 degrees and a horizontal beam width of 17.5 degrees at 3 dB. Our antenna comes with a None square cover flange and is built to precise microwave and millimeter wave horn antenna design specifications. This WR-62 antenna has an aluminum body. Additional dimensions and specifications for this antenna are on our downloadable PDF datasheet. This WR-62 waveguide horn antenna with 20 dBi gain is part of over one million RF, microwave, and millimeter wave components available from Pasternack. Our horn antenna can ship worldwide on the same business day as it is purchased with our other available RF parts. For further information on similar products, our expert technical support and knowledgeable sales team can help you get the ideal waveguide horn that meets your requirements. | 1 : $2,310.0
5 : $2,217.6
10 : $2,125.2
25 : $2,032.8
|
| 0
|
Teledyne HiRel | 5962-8762201FA
| Teledyne HiRel | DECODER/DEMULTIPLEXER, 3-TO-8-LINE
RoHS : Not Compliant | | 0
|
5962-87622012A
| Teledyne HiRel | DECODER/DEMULTIPLEXER, 3-TO-8-LINE
RoHS : Not Compliant | | 0
|
5962-8762201EA
| Teledyne HiRel | DECODER/DEMULTIPLEXER, 3-TO-8-LINE
RoHS : Not Compliant | | 0
|
Waytek, Inc. | AT62-201-16141
| Amphenol Sine Systems | AT/AHD-9 Female Nickel Socket CONTACT 16-20GA SIZE 16 Solid 0462-201-16141 Alt# 38194 | 15 : $0.5317
50 : $0.5016
100 : $0.4644
200 : $0.4481
500 : $0.4319
1,000 : $0.4156
|
| 216,724
|
AT62-209-16141
| Amphenol Sine Systems | AT/AHD-9 Female Nickel Socket Contact 14GA SIZE 16 Solid 0462-209-16141 | 10 : $0.6742
50 : $0.6487
100 : $0.6265
200 : $0.5947
500 : $0.5756
1,000 : $0.5533
|
| 126,249
|
AT62-203-12141
| Amphenol Sine Systems | ATP/AHD-6 Female Nickel Socket Contact 14-12GA Size 12 Solid 0462-203-12141 | 1 : $2.0744
10 : $1.9024
50 : $1.7628
100 : $1.6875
200 : $1.6125
500 : $1.5371
|
| 46,786
|
AT62-201-20141
| Amphenol Sine Systems | ATM Female Nickel Socket Contact 22-20GA Size 20 Solid 634 0462-201-20141 Size Change | 10 : $0.4672
50 : $0.4177
100 : $0.3782
200 : $0.3682
500 : $0.3584
1,000 : $0.3386
|
| 37,948
|
AT62-201-1631
| Amphenol Sine Systems | AT/AHD-9 Female Gold Socket Contact 20-16GA Size 16 Solid 0462-201-1631 | 1 : $1.0992
10 : $1.0255
50 : $0.9334
100 : $0.8781
200 : $0.8413
500 : $0.8167
|
| 21,993
|
AT62-20-0122
| Amphenol Sine Systems | ATM Female Loose Socket CONTACT SIZE 20 S&F 22-16GA TOOL 636 1062-20-0122 NICKEL | 20 : $0.2796
50 : $0.2693
100 : $0.2607
200 : $0.2469
500 : $0.2382
1,000 : $0.2313
|
| 12,946
|
AT62-203-08141
| Amphenol Sine Systems | Amphenol Sine Systems AT62-203-08141 ATHD female socket terminal is a size 8 connector socket for 10-8 Ga. wire. Built from copper alloy with nickel plating, it supports ATHD Series heavy-duty power connector assemblies. | 1 : $4.62
10 : $4.47
50 : $4.35
100 : $4.18
200 : $4.07
500 : $3.96
|
| 1,928
|
AT62-203-04141
| Amphenol Sine Systems | Amphenol Sine Systems AT62-203-04141 ATHD female socket terminal is a size 4 connector socket for 6 gauge wire. Built from copper alloy with nickel plating, it supports ATHD Series heavy-duty power connector assemblies. | 1 : $8.6
10 : $7.88
50 : $7.3
100 : $7.11
200 : $6.66
500 : $6.23
|
| 1,243
|
AT62-20-0122
| Amphenol Sine Systems | ATM Female Reel Socket Contact 22-16GA Size 20 S&F 4000/Reel 1062-20-0122 | 4,000 : $0.2162
20,000 : $0.1938
|
| 0
|
-3.20-mm-x-2.50-mm.jpg)
Russian ▼ 
English
Chinese
German
Japanese
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand